How can i control NI-6115 to collect data from 2 channels and save as 2 files?
I want to program NI-6115 card to collect data from 2 channels and save the two data into two different filenames that i specified?
How do i write in labview codes?
Calibur,
LabVIEW includes a number of examples that demonstrate how to acquire analog input data and write it to disk. Dependent upon the type of file you would like to use, I would suggest that you examine one of the following examples:
Cont Acq to File (binary).vi
Cont Acq to File (scaled).vi
Cont Acq to Spreadsheet File.vi
With regards to writing each channel's data to a separate file, you will need to use the Index Array function to generate two 1-D arrays, each containing data for one channel. These arrays can then be written to separate files using two Write File functions.
Good luck with your application.
Spencer S.
Similar Messages
-
How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them. They have a ton of books but I can only listen to them from my windows media player and I wouldlove to download to my I pod but I have tried everything I can think of it they won't go over. Someone said all I had to do was copy them over and they would convert but I can't even get them to copy. Thanks.
Well it started happening AGAIN with my 2nd IPod. No matter what I did, it Itunes would NOT restore it!
I finally installed Itunes on my hubby's PC at work and managed to get it restored there.
Apparently, there must be some sort of compatibility issue with the windows version of Itunes and some other piece of software on my pc.
And one more important thing! I had to follow the instructions in the other thread that talks about how to correctly uninstall itunes and quicktime, in order to completely eliminate ALL traces of my "first" ipod's existence so it wouldn't demand that I restore it.
I think the software got "confused" and thought when I connected my 2nd ipod, that it was the 1st and that it still needed to be restored.
Basically, this is just POORLY written and POORLY tested software! -
How can I return a big amount of data from a stored procedure?
How can I return a big amount of data from a stored procedure in a efficient way ?
For example not using a cursor for going through all the rows and then assign the values to variables.
thanks in advance!Let's see if I'm able to explain myself..
I have a SQL query with..about 190.000 (in the best fo the the options)
I have something like this in my stored procedure..
FOR REC IN trn_adj_no
LOOP
REC_PIPE.INSTANCE_ID:=REC.INSTANCE_ID;
REC_PIPE.PROCESS_ID:=REC.PROCESS_ID;
REC_PIPE.ENTITY_TYPE:='TRANSACTION';
REC_PIPE.CRES_FILENAME:=REC.CRES_FILENAME;
REC_PIPE.CHUNK_REVISION_SK:=P_CHUNK_REVISION_SK;
REC_PIPE.CHUNK_ID:=trim(p_chunk_id);
REC_PIPE.FCL_SK:=REC.FCL_SK;
REC_PIPE.FCL_TRADE_SK:=REC.FCL_TRADE_SK;
REC_PIPE.FCL_VALUATION_SK:=REC.FCL_VALUATION_SK;
REC_PIPE.FCL_BUSINESS_GROUP:=REC.FCL_BUSINESS_GROUP;
REC_PIPE.ABS_TRN_CD:=REC.ABS_TRN_CD;
REC_PIPE.ACC_INTEREST_IMP_LOAN_CCY_IFRS:=REC.ACC_INTEREST_IMP_LOAN_CCY_IFRS;
REC_PIPE.ACC_INTEREST_IMP_LOAN_IFRS:=REC.ACC_INTEREST_IMP_LOAN_IFRS;
REC_PIPE.ACCRUED_INT_AMT:=REC.ACCRUED_INT_AMT;
REC_PIPE.ACCRUED_INT_CCY_CD:=REC.ACCRUED_INT_CCY_CD;
REC_PIPE.AMORT_ID:=REC.AMORT_ID;
REC_PIPE.AMORT_IND:=REC.AMORT_IND;
REC_PIPE.ATI:=REC.ATI;
REC_PIPE.ATI_2:=REC.ATI_2;
REC_PIPE.ATI_2_AMT:=REC.ATI_2_AMT;
REC_PIPE.ATI_2_CCY_CD:=REC.ATI_2_CCY_CD;
REC_PIPE.ATI_AMT:=REC.ATI_AMT;
REC_PIPE.ATI_CCY_CD:=REC.ATI_CCY_CD;
REC_PIPE.AVG_MTH_DUE_AMT:=REC.AVG_MTH_DUE_AMT;
REC_PIPE.AVG_MTH_DUE_CCY_CD:=REC.AVG_MTH_DUE_CCY_CD;
REC_PIPE.AVG_YTD_DUE_AMT:=REC.AVG_YTD_DUE_AMT;
REC_PIPE.AVG_YTD_DUE_CCY_CD:=REC.AVG_YTD_DUE_CCY_CD;
REC_PIPE.BAL_SHEET_EXP_AMT:=REC.BAL_SHEET_EXP_AMT;
REC_PIPE.BAL_SHEET_EXP_AMT_IFRS:=REC.BAL_SHEET_EXP_AMT_IFRS;
REC_PIPE.BAL_SHEET_EXP_CCY_CD:=REC.BAL_SHEET_EXP_CCY_CD;
REC_PIPE.BAL_SHEET_EXP_CCY_CD_IFRS:=REC.BAL_SHEET_EXP_CCY_CD_IFRS;
REC_PIPE.BAL_SHEET_EXP_EUR_AMT:=REC.BAL_SHEET_EXP_EUR_AMT;
REC_PIPE.BAL_SHEET_EXP_EUR_AMT_IFRS:=REC.BAL_SHEET_EXP_EUR_AMT_IFRS;
REC_PIPE.BEN_CCDB_ID:=REC.BEN_CCDB_ID;
REC_PIPE.BEN_CD:=REC.BEN_CD;
REC_PIPE.BEN_SRC_CD:=REC.BEN_SRC_CD;
REC_PIPE.BOOK_CD:=REC.BOOK_CD;
REC_PIPE.BOOK_TYPE_CD:=REC.BOOK_TYPE_CD;
REC_PIPE.BOOK_VAL_AMT:=REC.BOOK_VAL_AMT;
REC_PIPE.BOOK_VAL_AMT_IFRS:=REC.BOOK_VAL_AMT_IFRS;
REC_PIPE.BOOK_VAL_CCY_CD:=REC.BOOK_VAL_CCY_CD;
REC_PIPE.BOOK_VAL_CCY_CD_IFRS:=REC.BOOK_VAL_CCY_CD_IFRS;
REC_PIPE.BOOK_VAL_US_GAAP_AMT:=REC.BOOK_VAL_US_GAAP_AMT;
REC_PIPE.BRANCH_ID:=REC.BRANCH_ID;
REC_PIPE.BRANCH_LOC_CD:=REC.BRANCH_LOC_CD;
REC_PIPE.BS_COMPEN_CD:=REC.BS_COMPEN_CD;
REC_PIPE.BUS_AREA_UBR_ID:=REC.BUS_AREA_UBR_ID;
REC_PIPE.CA_CD:=REC.CA_CD;
REC_PIPE.CAD_RISK_WEIGHT_PCT:=REC.CAD_RISK_WEIGHT_PCT;
REC_PIPE.CASH_SETTLE_IND:=REC.CASH_SETTLE_IND;
REC_PIPE.CLS_FLG:=REC.CLS_FLG;
REC_PIPE.COB_DT:=REC.COB_DT;
REC_PIPE.COL_AGMENT_SRC_CD:=REC.COL_AGMENT_SRC_CD;
REC_PIPE.CONSOLIDATION_PCT:=REC.CONSOLIDATION_PCT;
REC_PIPE.CONTRACT_AMT:=REC.CONTRACT_AMT;
REC_PIPE.CONTRACT_COUNT:=REC.CONTRACT_COUNT;
REC_PIPE.COST_UNSEC_WORKOUT_AMT:=REC.COST_UNSEC_WORKOUT_AMT;
REC_PIPE.CPTY_CCDB_ID:=REC.CPTY_CCDB_ID;
REC_PIPE.CPTY_CD:=REC.CPTY_CD;
REC_PIPE.CPTY_LONG_NAME:=REC.CPTY_LONG_NAME;
REC_PIPE.CPTY_SRC_PROXY_UBR_ID:=REC.CPTY_SRC_PROXY_UBR_ID;
REC_PIPE.CPTY_TYPE_CD:=REC.CPTY_TYPE_CD;
REC_PIPE.CPTY_UBR_ID:=REC.CPTY_UBR_ID;
REC_PIPE.CREDIT_LINE_NET_IND:=REC.CREDIT_LINE_NET_IND;
REC_PIPE.CRES_SYS_ID:=REC.CRES_SYS_ID;
REC_PIPE.CTRY_RISK_PROVISION_BAL_AMT:=REC.CTRY_RISK_PROVISION_BAL_AMT;
REC_PIPE.CUR_NOTIONAL_AMT:=REC.CUR_NOTIONAL_AMT;
REC_PIPE.CUR_NOTIONAL_CCY_CD:=REC.CUR_NOTIONAL_CCY_CD;
REC_PIPE.CUR_NOTIONAL_CCY_CD_IFRS:=REC.CUR_NOTIONAL_CCY_CD_IFRS;
REC_PIPE.CUR_NOTIONAL_AMT_IFRS:=REC.CUR_NOTIONAL_AMT_IFRS;
REC_PIPE.DB_ENTITY_TRANSFER_ASSETS_CD:=REC.DB_ENTITY_TRANSFER_ASSETS_CD;
REC_PIPE.DEAL_TYPE_CD:=REC.DEAL_TYPE_CD;
REC_PIPE.DECOMPOSITION_IDENTIFIER:=REC.DECOMPOSITION_IDENTIFIER;
REC_PIPE.DEF_LOAN_FEE_IFRS:=REC.DEF_LOAN_FEE_IFRS;
REC_PIPE.DEF_LOAN_FEE_USGAAP:=REC.DEF_LOAN_FEE_USGAAP;
REC_PIPE.DELIVERY_DT:=REC.DELIVERY_DT;
REC_PIPE.DERIV_NOT_DT:=REC.DERIV_NOT_DT;
REC_PIPE.DERIV_NOT_IND:=REC.DERIV_NOT_IND;
REC_PIPE.DESK:=REC.DESK;
REC_PIPE.DIVISION_UBR_ID:=REC.DIVISION_UBR_ID;
REC_PIPE.ENTITY_CCDB_ID:=REC.ENTITY_CCDB_ID;
REC_PIPE.FAC_CD:=REC.FAC_CD;
REC_PIPE.FAC_LIMIT_CD:=REC.FAC_LIMIT_CD;
REC_PIPE.FAC_LIMIT_SRC_CD:=REC.FAC_LIMIT_SRC_CD;
REC_PIPE.FAC_SRC_CD:=REC.FAC_SRC_CD;
REC_PIPE.FAIR_VAL_CD_IFRS:=REC.FAIR_VAL_CD_IFRS;
REC_PIPE.FED_CLASS_CD:=REC.FED_CLASS_CD;
REC_PIPE.FIRST_RISK_PROVISION_DT:=REC.FIRST_RISK_PROVISION_DT;
REC_PIPE.FV_IMP_LOSS_CRED_CCY_IFRS:=REC.FV_IMP_LOSS_CRED_CCY_IFRS;
REC_PIPE.FV_IMP_LOSS_CRED_IFRS:=REC.FV_IMP_LOSS_CRED_IFRS;
REC_PIPE.FV_IMP_LOSS_CRED_YTD_CCY_IFRS:=REC.FV_IMP_LOSS_CRED_YTD_CCY_IFRS;
REC_PIPE.FV_IMP_LOSS_CRED_YTD_IFRS:=REC.FV_IMP_LOSS_CRED_YTD_IFRS;
REC_PIPE.GEN_RISK_PROVISION_BAL_AMT:=REC.GEN_RISK_PROVISION_BAL_AMT;
REC_PIPE.GL_PROFIT_CENTRE:=REC.GL_PROFIT_CENTRE;
REC_PIPE.GLOBAL_GL_CD:=REC.GLOBAL_GL_CD;
REC_PIPE.IFRS_POSITION:=REC.IFRS_POSITION;
REC_PIPE.IFRS_POSITION_AGGR:=REC.IFRS_POSITION_AGGR;
REC_PIPE.IMP_DT:=REC.IMP_DT;
REC_PIPE.IMP_METHOD_CD:=REC.IMP_METHOD_CD;
REC_PIPE.INT_COMPEN_CD:=REC.INT_COMPEN_CD;
REC_PIPE.INTER_IND:=REC.INTER_IND;
REC_PIPE.INTERCO_IND:=REC.INTERCO_IND;
REC_PIPE.INTERCO_IND_IFRS:=REC.INTERCO_IND_IFRS;
REC_PIPE.LOAN_PUR_FAIR_VAL_ADJ_AMT:=REC.LOAN_PUR_FAIR_VAL_ADJ_AMT;
REC_PIPE.LOCAL_GL_CD:=REC.LOCAL_GL_CD;
REC_PIPE.LOWEST_LEVEL_UBR_ID:=REC.LOWEST_LEVEL_UBR_ID;
REC_PIPE.LTD_FEES_TO_PRINCIPAL_AMT:=REC.LTD_FEES_TO_PRINCIPAL_AMT;
REC_PIPE.MA_CD:=REC.MA_CD;
REC_PIPE.MA_SPL_NOTE:=REC.MA_SPL_NOTE;
REC_PIPE.MA_SRC_CD:=REC.MA_SRC_CD;
REC_PIPE.MA_TYPE_CD:=REC.MA_TYPE_CD;
REC_PIPE.MAN_LINK_ID:=REC.MAN_LINK_ID;
REC_PIPE.MASTER_MA_CD:=REC.MASTER_MA_CD;
REC_PIPE.MATURITY_DT:=REC.MATURITY_DT;
REC_PIPE.MAX_OUT_AMT:=REC.MAX_OUT_AMT;
REC_PIPE.MAX_OUT_CCY_CD:=REC.MAX_OUT_CCY_CD;
REC_PIPE.MTM_AMT:=REC.MTM_AMT;
REC_PIPE.MTM_AMT_IFRS:=REC.MTM_AMT_IFRS;
REC_PIPE.MTM_CCY_CD:=REC.MTM_CCY_CD;
REC_PIPE.MTM_CCY_CD_IFRS:=REC.MTM_CCY_CD_IFRS;
REC_PIPE.NEW_RISK_PROVISION_AMT:=REC.NEW_RISK_PROVISION_AMT;
REC_PIPE.NON_PERF_IND:=REC.NON_PERF_IND;
REC_PIPE.NON_PERF_RCV_INT_AMT:=REC.NON_PERF_RCV_INT_AMT;
REC_PIPE.OPT_TYPE_CD:=REC.OPT_TYPE_CD;
REC_PIPE.ORIG_NOTIONAL_AMT:=REC.ORIG_NOTIONAL_AMT;
REC_PIPE.ORIG_NOTIONAL_CCY_CD:=REC.ORIG_NOTIONAL_CCY_CD;
REC_PIPE.ORIG_TRN_CD:=REC.ORIG_TRN_CD;
REC_PIPE.ORIG_TRN_SRC_CD:=REC.ORIG_TRN_SRC_CD;
REC_PIPE.OTHER_CUR_NOTIONAL_AMT:=REC.OTHER_CUR_NOTIONAL_AMT;
REC_PIPE.OTHER_CUR_NOTIONAL_CCY_CD:=REC.OTHER_CUR_NOTIONAL_CCY_CD;
REC_PIPE.OTHER_ORIG_NOTIONAL_AMT:=REC.OTHER_ORIG_NOTIONAL_AMT;
REC_PIPE.OTHER_ORIG_NOTIONAL_CCY_CD:=REC.OTHER_ORIG_NOTIONAL_CCY_CD;
REC_PIPE.OVERDUE_AMT:=REC.OVERDUE_AMT;
REC_PIPE.OVERDUE_CCY_CD:=REC.OVERDUE_CCY_CD;
REC_PIPE.OVERDUE_DAY_COUNT:=REC.OVERDUE_DAY_COUNT;
REC_PIPE.PAY_CONTRACT_AMT:=REC.PAY_CONTRACT_AMT;
REC_PIPE.PAY_CONTRACT_CCY_CD:=REC.PAY_CONTRACT_CCY_CD;
REC_PIPE.PAY_FWD_AMT:=REC.PAY_FWD_AMT;
REC_PIPE.PAY_FWD_CCY_CD:=REC.PAY_FWD_CCY_CD;
REC_PIPE.PAY_INT_INTERVAL:=REC.PAY_INT_INTERVAL;
REC_PIPE.PAY_INT_RATE:=REC.PAY_INT_RATE;
REC_PIPE.PAY_INT_RATE_TYPE_CD:=REC.PAY_INT_RATE_TYPE_CD;
REC_PIPE.PAY_NEXT_FIX_CPN_DT:=REC.PAY_NEXT_FIX_CPN_DT;
REC_PIPE.PAY_UL_SEC_TYPE_CD:=REC.PAY_UL_SEC_TYPE_CD;
REC_PIPE.PAY_UL_ISS_CCDB_ID:=REC.PAY_UL_ISS_CCDB_ID;
REC_PIPE.PAY_UL_MTM_AMT:=REC.PAY_UL_MTM_AMT;
REC_PIPE.PAY_UL_MTM_CCY_CD:=REC.PAY_UL_MTM_CCY_CD;
REC_PIPE.PAY_UL_SEC_CCY_CD:=REC.PAY_UL_SEC_CCY_CD;
REC_PIPE.PAY_UL_SEC_CD:=REC.PAY_UL_SEC_CD;
REC_PIPE.PCP_TRANSACTION_SK:=REC.PCP_TRANSACTION_SK;
REC_PIPE.PROD_AREA_UBR_ID:=REC.PROD_AREA_UBR_ID;
REC_PIPE.QUOTA_PART_AMT:=REC.QUOTA_PART_AMT;
REC_PIPE.RCV_CONTRACT_AMT:=REC.RCV_CONTRACT_AMT;
REC_PIPE.RCV_CONTRACT_CCY_CD:=REC.RCV_CONTRACT_CCY_CD;
REC_PIPE.RCV_FWD_AMT:=REC.RCV_FWD_AMT;
REC_PIPE.RCV_FWD_CCY_CD:=REC.RCV_FWD_CCY_CD;
REC_PIPE.RCV_INT_RATE:=REC.RCV_INT_RATE;
REC_PIPE.RCV_INT_RATE_TYPE_CD:=REC.RCV_INT_RATE_TYPE_CD;
REC_PIPE.RCV_INT_INTERVAL:=REC.RCV_INT_INTERVAL;
REC_PIPE.RCV_NEXT_FIX_CPN_DT:=REC.RCV_NEXT_FIX_CPN_DT;
REC_PIPE.RCV_UL_ISS_CCDB_ID:=REC.RCV_UL_ISS_CCDB_ID;
REC_PIPE.RCV_UL_MTM_AMT:=REC.RCV_UL_MTM_AMT;
REC_PIPE.RCV_UL_MTM_CCY_CD:=REC.RCV_UL_MTM_CCY_CD;
REC_PIPE.RCV_UL_SEC_CCY_CD:=REC.RCV_UL_SEC_CCY_CD;
REC_PIPE.RCV_UL_SEC_CD:=REC.RCV_UL_SEC_CD;
REC_PIPE.RCV_UL_SEC_TYPE_CD:=REC.RCV_UL_SEC_TYPE_CD;
REC_PIPE.REC_SEC_AMT:=REC.REC_SEC_AMT;
REC_PIPE.REC_SEC_CCY_CD:=REC.REC_SEC_CCY_CD;
REC_PIPE.REC_UNSEC_AMT:=REC.REC_UNSEC_AMT;
REC_PIPE.REC_UNSEC_CCY_CD:=REC.REC_UNSEC_CCY_CD;
REC_PIPE.RECON_CD:=REC.RECON_CD;
REC_PIPE.RECON_SRC_CD:=REC.RECON_SRC_CD;
REC_PIPE.RECOV_AMT:=REC.RECOV_AMT;
REC_PIPE.RECOVERY_FLAG:=REC.RECOVERY_FLAG;
REC_PIPE.REGULATORY_NET_IND:=REC.REGULATORY_NET_IND;
REC_PIPE.REL_RISK_PROVISION_AMT:=REC.REL_RISK_PROVISION_AMT;
REC_PIPE.RESPONSIBLE_BRANCH_CCDB_ID:=REC.RESPONSIBLE_BRANCH_CCDB_ID;
REC_PIPE.RESPONSIBLE_BRANCH_ID:=REC.RESPONSIBLE_BRANCH_ID;
REC_PIPE.RESPONSIBLE_BRANCH_LOC_CD:=REC.RESPONSIBLE_BRANCH_LOC_CD;
REC_PIPE.RESTRUCT_IND:=REC.RESTRUCT_IND;
REC_PIPE.RISK_END_DT:=REC.RISK_END_DT;
REC_PIPE.RISK_ENGINES_METHOD_USED:=REC.RISK_ENGINES_METHOD_USED;
REC_PIPE.RISK_MITIGATING_PCT:=REC.RISK_MITIGATING_PCT;
REC_PIPE.RISK_PROVISION_BAL_AMT:=REC.RISK_PROVISION_BAL_AMT;
REC_PIPE.RISK_PROVISION_CCY_CD:=REC.RISK_PROVISION_CCY_CD;
REC_PIPE.RISK_WRITE_OFF_AMT:=REC.RISK_WRITE_OFF_AMT;
REC_PIPE.RISK_WRITE_OFF_LIFE_DT_AMT:=REC.RISK_WRITE_OFF_LIFE_DT_AMT;
REC_PIPE.RT_BUS_AREA_UBR_ID:=REC.RT_BUS_AREA_UBR_ID;
REC_PIPE.RT_CB_CCDB_ID:=REC.RT_CB_CCDB_ID;
REC_PIPE.RT_COV_CD:=REC.RT_COV_CD;
REC_PIPE.RT_COV_SRC_CD:=REC.RT_COV_SRC_CD;
REC_PIPE.RT_COV_TYPE_CD:=REC.RT_COV_TYPE_CD;
REC_PIPE.RT_COV_TYPE_CD_IFRS:=REC.RT_COV_TYPE_CD_IFRS;
REC_PIPE.RT_TYPE_CD:=REC.RT_TYPE_CD;
REC_PIPE.RT_TYPE_CD_IFRS:=REC.RT_TYPE_CD_IFRS;
REC_PIPE.SENIORITY:=REC.SENIORITY;
REC_PIPE.SETTLE_STATUS_ID:=REC.SETTLE_STATUS_ID;
REC_PIPE.SETTLEMENT_CD:=REC.SETTLEMENT_CD;
REC_PIPE.SETTLEMENT_DT:=REC.SETTLEMENT_DT;
REC_PIPE.SOX_REF:=REC.SOX_REF;
REC_PIPE.SPE_IND:=REC.SPE_IND;
REC_PIPE.SPL_TREAT_IND_IFRS:=REC.SPL_TREAT_IND_IFRS;
REC_PIPE.SRC_PROD_TYPE_CD:=REC.SRC_PROD_TYPE_CD;
REC_PIPE.SRC_PROD_TYPE_CD_IFRS:=REC.SRC_PROD_TYPE_CD_IFRS;
REC_PIPE.SRC_PROXY_UBR_CD:=REC.SRC_PROXY_UBR_CD;
REC_PIPE.START_DT:=REC.START_DT;
REC_PIPE.STRATEGIC_LEND_IND:=REC.STRATEGIC_LEND_IND;
REC_PIPE.STRIKE_FWD_FUT_PRICE_AMT:=REC.STRIKE_FWD_FUT_PRICE_AMT;
REC_PIPE.STRIKE_FWD_FUT_PRICE_CCY_CD:=REC.STRIKE_FWD_FUT_PRICE_CCY_CD;
REC_PIPE.TERMINATION_LOAN_DT:=REC.TERMINATION_LOAN_DT;
REC_PIPE.TRAD_ASSET_CD_IFRS:=REC.TRAD_ASSET_CD_IFRS;
REC_PIPE.TRADE_DT:=REC.TRADE_DT;
REC_PIPE.TRADE_ENTITY_CCDB_ID:=REC.TRADE_ENTITY_CCDB_ID;
REC_PIPE.TRADE_ENTITY_LOC_CD:=REC.TRADE_ENTITY_LOC_CD;
REC_PIPE.TRADE_RELATED_IND:=REC.TRADE_RELATED_IND;
REC_PIPE.TRADE_STATUS:=REC.TRADE_STATUS;
REC_PIPE.TRADING_ENTITY_LOC_CD:=REC.TRADING_ENTITY_LOC_CD;
REC_PIPE.TRAN_MATCH_CD:=REC.TRAN_MATCH_CD;
REC_PIPE.TRN_CD:=REC.TRN_CD;
REC_PIPE.TRN_LINK_CD:=REC.TRN_LINK_CD;
REC_PIPE.TRN_SRC_CD:=REC.TRN_SRC_CD;
REC_PIPE.TRN_TYPE_CD:=REC.TRN_TYPE_CD;
REC_PIPE.TRN_VERSION:=REC.TRN_VERSION;
REC_PIPE.UL_DELIVERY_DT:=REC.UL_DELIVERY_DT;
REC_PIPE.UL_MATURITY_DT:=REC.UL_MATURITY_DT;
REC_PIPE.UNDLY_ISS_NAME:=REC.UNDLY_ISS_NAME;
REC_PIPE.UNEARNED_INCOME_CCY_CD:=REC.UNEARNED_INCOME_CCY_CD;
REC_PIPE.UNEARNED_INCOME_DIS_LOAN_AMT:=REC.UNEARNED_INCOME_DIS_LOAN_AMT;
REC_PIPE.US_GAAP_POSITION_AGGR:=REC.US_GAAP_POSITION_AGGR;
REC_PIPE.VALUATION_DT:=REC.VALUATION_DT;
REC_PIPE.XCHG_CTRY_CD:=REC.XCHG_CTRY_CD;
REC_PIPE.YEAR01_NOTIONAL_AMT:=REC.YEAR01_NOTIONAL_AMT;
REC_PIPE.YEAR02_NOTIONAL_AMT:=REC.YEAR02_NOTIONAL_AMT;
REC_PIPE.YEAR03_NOTIONAL_AMT:=REC.YEAR03_NOTIONAL_AMT;
REC_PIPE.YEAR04_NOTIONAL_AMT:=REC.YEAR04_NOTIONAL_AMT;
REC_PIPE.YEAR05_NOTIONAL_AMT:=REC.YEAR05_NOTIONAL_AMT;
REC_PIPE.YEAR06_NOTIONAL_AMT:=REC.YEAR06_NOTIONAL_AMT;
REC_PIPE.YEAR07_NOTIONAL_AMT:=REC.YEAR07_NOTIONAL_AMT;
REC_PIPE.YEAR08_NOTIONAL_AMT:=REC.YEAR08_NOTIONAL_AMT;
REC_PIPE.YEAR09_NOTIONAL_AMT:=REC.YEAR09_NOTIONAL_AMT;
REC_PIPE.YEAR10_NOTIONAL_AMT:=REC.YEAR10_NOTIONAL_AMT;
REC_PIPE.YTD_PL_TRADE_AMT:=REC.YTD_PL_TRADE_AMT;
REC_PIPE.FCL_VALIDATED_IND:=REC.FCL_VALIDATED_IND;
REC_PIPE.FCL_EXCLUDED_IND:=REC.FCL_EXCLUDED_IND;
REC_PIPE.FCL_SOURCE_SYSTEM:=REC.FCL_SOURCE_SYSTEM;
REC_PIPE.FCL_CREATE_TIMESTAMP:=REC.FCL_CREATE_TIMESTAMP;
REC_PIPE.FCL_UPDATE_TIMESTAMP:=REC.FCL_UPDATE_TIMESTAMP;
REC_PIPE.FCL_TRADE_LOAD_DATE:=REC.FCL_TRADE_LOAD_DATE;
REC_PIPE.FCL_VALUATION_LOAD_DATE:=REC.FCL_VALUATION_LOAD_DATE;
REC_PIPE.FCL_MATRIX_TRADE_TYPE:=REC.FCL_MATRIX_TRADE_TYPE;
REC_PIPE.PCP_GCDS_REVISION:=REC.PCP_GCDS_REVISION;
REC_PIPE.FCL_UTP_BOOK_CD:=REC.FCL_UTP_BOOK_CD;
REC_PIPE.FCL_MIS_RISK_BOOK_CD:=REC.FCL_MIS_RISK_BOOK_CD;
REC_PIPE.ALD_STATUS:=REC.ALD_STATUS;
REC_PIPE.FCAT_OPERATION:=REC.FCAT_OPERATION;
REC_PIPE.INTERNAL_INTRA_IND_IFRS:=REC.INTERNAL_INTRA_IND_IFRS;
REC_PIPE.FCL_USAGE_IND:=REC.FCL_USAGE_IND;
REC_PIPE.QUICK:=REC.QUICK;
REC_PIPE.SEDOL:=REC.SEDOL;
REC_PIPE.CUSIP:=REC.CUSIP;
REC_PIPE.ISIN:=REC.ISIN;
REC_PIPE.QUANTITY:=REC.QUANTITY;
REC_PIPE.RIC:=REC.RIC;
REC_PIPE.DESCRIPTION:=REC.DESCRIPTION;
REC_PIPE.RESET_DATE:=REC.RESET_DATE;
REC_PIPE.PRICE:=REC.PRICE;
REC_PIPE.EXCHANGERATE:=REC.EXCHANGERATE;
REC_PIPE.PARA_PROD_TYPE_ID:=REC.PARA_PROD_TYPE_ID;
REC_PIPE.EFF_INT_RATE:=REC.EFF_INT_RATE;
REC_PIPE.ORIG_FEE_UNREALISED_AMT:=REC.ORIG_FEE_UNREALISED_AMT;
REC_PIPE.ASSET_TYPE:=REC.ASSET_TYPE;
REC_PIPE.IMP_IND_IFRS:=REC.IMP_IND_IFRS;
REC_PIPE.NOT_AMT_REDEMPTION_TO_1YR:=REC.NOT_AMT_REDEMPTION_TO_1YR;
REC_PIPE.NOT_AMT_REDEMPTION_TO_5YR:=REC.NOT_AMT_REDEMPTION_TO_5YR;
REC_PIPE.NOT_AMT_REDEMPTION_OVER_5YR:=REC.NOT_AMT_REDEMPTION_OVER_5YR;
REC_PIPE.CASH_LTD:=REC.CASH_LTD;
REC_PIPE.CASH_LTD_CCY:=REC.CASH_LTD_CCY;
REC_PIPE.FCL_FACILITY_SK:=REC.FCL_FACILITY_SK;
REC_PIPE.DILUTION_RISK_CRITERIA:=REC.DILUTION_RISK_CRITERIA;
REC_PIPE.FCL_RMS_RUNID:=REC.FCL_RMS_RUNID;
REC_PIPE.BSTYPE:=REC.BSTYPE;
REC_PIPE.YTD_ACCR_DIV:=REC.YTD_ACCR_DIV;
REC_PIPE.YTD_DIV:=REC.YTD_DIV;
REC_PIPE.ACC_ADJ_YTD:=REC.ACC_ADJ_YTD;
REC_PIPE.FV_RLZD_PL:=REC.FV_RLZD_PL;
REC_PIPE.ITD_PL:=REC.ITD_PL;
REC_PIPE.YTD_RLZD_PL:=REC.YTD_RLZD_PL;
REC_PIPE.YTD_UNRLZD_PL:=REC.YTD_UNRLZD_PL;
REC_PIPE.TRN_BAS_LGD:=REC.TRN_BAS_LGD;
REC_PIPE.TRAD_YTD_RLZD_PL:=REC.TRAD_YTD_RLZD_PL;
REC_PIPE.TRAD_YTD_UNRLZD_PL:=REC.TRAD_YTD_UNRLZD_PL;
REC_PIPE.UNADJUSTED_PV:=REC.UNADJUSTED_PV;
REC_PIPE.UNADJUSTED_REALISED_PL:=REC.UNADJUSTED_REALISED_PL;
REC_PIPE.UNADJUSTED_UNREALISED_PL:=REC.UNADJUSTED_UNREALISED_PL;
REC_PIPE.GRC_PROD_TYPE_ID:=REC.GRC_PROD_TYPE_ID;
REC_PIPE.GRC_PROD_TYPE_ID_IFRS:=REC.GRC_PROD_TYPE_ID_IFRS;
REC_PIPE.CUR_FEE:=REC.CUR_FEE;
REC_PIPE.SEC_IND:=REC.SEC_IND;
REC_PIPE.INVEST_ASSETS_PORT:=REC.INVEST_ASSETS_PORT;
REC_PIPE.RISK_PROVISION_START_BAL_AMT:=REC.RISK_PROVISION_START_BAL_AMT;
REC_PIPE.GEN_RISK_PRV_START_BAL_AMT:=REC.GEN_RISK_PRV_START_BAL_AMT;
REC_PIPE.GEN_RISK_PROVISION_NEW:=REC.GEN_RISK_PROVISION_NEW;
REC_PIPE.GEN_RISK_PROVISION_REL:=REC.GEN_RISK_PROVISION_REL;
REC_PIPE.ACQUIRED_IND:=REC.ACQUIRED_IND;
REC_PIPE.CRED_NET_MNA:=REC.CRED_NET_MNA;
REC_PIPE.SEC_IFRS_VUE_ADJ:=REC.SEC_IFRS_VUE_ADJ;
REC_PIPE.YEAR00_NOTIONAL_AMT:=REC.YEAR00_NOTIONAL_AMT;
REC_PIPE.MAX_OVERDUE_DAYS:=REC.MAX_OVERDUE_DAYS;
REC_PIPE.MIS_CD:=REC.MIS_CD;
REC_PIPE.MULTINAME_POOL_SK:=REC.MULTINAME_POOL_SK;
REC_PIPE.MULTINAME_CHUNK_REVISION_SK:=REC.MULTINAME_CHUNK_REVISION_SK;
REC_PIPE.MTRX_CALC_CNTRL_EPE:=REC.MTRX_CALC_CNTRL_EPE;
REC_PIPE.MTRX_CALC_CNTRL_PFE:=REC.MTRX_CALC_CNTRL_PFE;
REC_PIPE.FCL_TE_VALIDATED_IND:=REC.FCL_TE_VALIDATED_IND;
REC_PIPE.PCP_TE_DYNAMIC_KEY:=REC.PCP_TE_DYNAMIC_KEY;
REC_PIPE.AVG_COST:=REC.AVG_COST;
REC_PIPE.SEC_LONG_NAME:=REC.SEC_LONG_NAME;
REC_PIPE.ISS_CTRY_CD:=REC.ISS_CTRY_CD;
REC_PIPE.RISK_REPORTING_UBR:=REC.RISK_REPORTING_UBR;
REC_PIPE.RISK_COVERING_BRANCH_CCDB:=REC.RISK_COVERING_BRANCH_CCDB;
REC_PIPE.CLEARING_STATUS:=REC.CLEARING_STATUS;
REC_PIPE.FCL_CPTY_SK:=REC.FCL_CPTY_SK;
REC_PIPE.STRGRP:=REC.STRGRP;
REC_PIPE.OPEN_ENDED_FLAG:=REC.OPEN_ENDED_FLAG;
REC_PIPE.AVAILABILITY_IND:=REC.AVAILABILITY_IND;
REC_PIPE.ESCRW_FLG:=REC.ESCRW_FLG;
REC_PIPE.ESTABLISHED_RELP_FLG:=REC.ESTABLISHED_RELP_FLG;
REC_PIPE.GOV_GTY_AMT:=REC.GOV_GTY_AMT;
REC_PIPE.BUBA_CTRY_ID:=REC.BUBA_CTRY_ID;
REC_PIPE.GOV_GTY_CTRY_CD:=REC.GOV_GTY_CTRY_CD;
REC_PIPE.INTERNET_DPST_FLG:=REC.INTERNET_DPST_FLG;
REC_PIPE.LAST_ACTIVITY_DT:=REC.LAST_ACTIVITY_DT;
REC_PIPE.NOTICE_PERIOD_QTY:=REC.NOTICE_PERIOD_QTY;
REC_PIPE.OPR_RELP_FLG:=REC.OPR_RELP_FLG;
REC_PIPE.SIG_WD_PENALTY_FLG:=REC.SIG_WD_PENALTY_FLG;
REC_PIPE.TRN_ACT_FLG:=REC.TRN_ACT_FLG;
PIPE ROW(REC_PIPE);
END LOOP;
the Stored procedre returns REC_PIPE.
I thins this could be not efficient enough...
What do you think? -
How can I use Automator to extract specific Data from a text file?
I have several hundred text files that contain a bunch of information. I only need six values from each file and ideally I need them as columns in an excel file.
How can I use Automator to extract specific Data from the text files and either create a new text file or excel file with the info? I have looked all over but can't find a solution. If anyone could please help I would be eternally grateful!!! If there is another, better solution than automator, please let me know!
Example of File Contents:
Link Time =
DD/MMM/YYYY
Random
Text
161 179
bytes of CODE memory (+ 68 range fill )
16 789
bytes of DATA memory (+ 59 absolute )
1 875
bytes of XDATA memory (+ 1 855 absolute )
90 783
bytes of FARCODE memory
What I would like to have as a final file:
EXCEL COLUMN1
Column 2
Column3
Column4
Column5
Column6
MM/DD/YYYY
filename1
161179
16789
1875
90783
MM/DD/YYYY
filename2
xxxxxx
xxxxx
xxxx
xxxxx
MM/DD/YYYY
filename3
xxxxxx
xxxxx
xxxx
xxxxx
Is this possible? I can't imagine having to go through each and every file one by one. Please help!!!Hello
You may try the following AppleScript script. It will ask you to choose a root folder where to start searching for *.map files and then create a CSV file named "out.csv" on desktop which you may import to Excel.
set f to (choose folder with prompt "Choose the root folder to start searching")'s POSIX path
if f ends with "/" then set f to f's text 1 thru -2
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & f's quoted form & " > ~/Desktop/out.csv
use strict;
use open IN => ':crlf';
chdir $ARGV[0] or die qq($!);
local $/ = qq(\\0);
my @ff = map {chomp; $_} qx(find . -type f -iname '*.map' -print0);
local $/ = qq(\\n);
# CSV spec
# - record separator is CRLF
# - field separator is comma
# - every field is quoted
# - text encoding is UTF-8
local $\\ = qq(\\015\\012); # CRLF
local $, = qq(,); # COMMA
# print column header row
my @dd = ('column 1', 'column 2', 'column 3', 'column 4', 'column 5', 'column 6');
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
# print data row per each file
while (@ff) {
my $f = shift @ff; # file path
if ( ! open(IN, '<', $f) ) {
warn qq(Failed to open $f: $!);
next;
$f =~ s%^.*/%%og; # file name
@dd = ('', $f, '', '', '', '');
while (<IN>) {
chomp;
$dd[0] = \"$2/$1/$3\" if m%Link Time\\s+=\\s+([0-9]{2})/([0-9]{2})/([0-9]{4})%o;
($dd[2] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of CODE\\s/o;
($dd[3] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of DATA\\s/o;
($dd[4] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of XDATA\\s/o;
($dd[5] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of FARCODE\\s/o;
last unless grep { /^$/ } @dd;
close IN;
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
EOF
Hope this may help,
H -
How can I join 3 tables while extracting data from SAP R/3?
I have 3 tables with the following columns
Emp table (emp)
emp_id
emp_name
emp_add
Dept table (dept)
dept_id
dept_name
dept_loc
Location table (loc)
loc_id
loc_name
Now. If I want to select data from loc_id = 10 and emp_id between 2000 and 3000
How to join these three tables while extracting data from R/3
join condition
loc.loc_id = dept.loc_id
and dept.dept_id = emp.dept_id
and loc.loc_id =10
and emp.emp_id between 2000 and 3000.
Could any one let me know the procedure to extract this data into BW system.Hi,
shouldn't your join condition be:
loc.loc_id = dept.DEPT_LOC
and dept.dept_id = ??
If you can join the three tables then create a generic datasource (RSO) based on a view (create your view with your join in SE11).
Enable the loc_id and the emp_id as selectable in the datasource so you can then select the values from a BW IPack.
hope this helps...
Olivier. -
How can I create an icon that when clicked will open and maximize an image file?
How do I create a icon that when clicked will open and maximize an image file? I have tried to use the simple image widget with maximize upon tap/click - however I am can only size the image really small and put on the page. I'd prefer to have a graphic that when clicked it simply opens up the image. This is for a very simple question/answer book. The user is suppose to look at a picture and locate something. I want to put an 'Answer' graphic on the image and then the user can click the 'answer' graphic and it will open up the picture with the answer identified.
Is this possible?Have yiu tried the PopOver widget? You can drop an image into it, maximise the image and the widgets window...But, you cannot get it full screen.
With iBooks Author, you either learn to use what is available within the app, or look online for third party widgets to purchase which suit your project. -
Dear Friends,
I have purchased Ipad 3 from the US but unfortunately while returning back to India I have lost in transit the copy of Invoice and a tiny PIN which helps in inserting 3G card.
Can anyone help me how can I get the duplicate copy of my invoice and an extra PIN from India and whether any Apple Store in India can issue me the duplicate copy of Invoice for the product purchased from US and also are the require to issue me an extra PIN on request.
Thanking you all in anticipation....
Regards,
Bankim MehtaYou can use a paper clip instead of the PIn that came with the iPad.
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=54813
Cheers, Tom -
How can I create a diagram where equal data from different cells will be added to one sector?
Hi,
I'm a new Mac user, so I have a lot of problems and questions every day. Moving to Mac from PC is not an easy thing)
Here is my problem:
I need to create a few diagrams for my science work, but can't correct one mistake. Every time one data from one cell from the table takes its own place in the diagram. But I need to ceparate equal data to show it is one section.
An example:
Sex
Age
Female
18
Female
18
Female
18
Female
25
Female
30
We need to create a diagram to show that we have
60% - 18 years
20% - 25 years
20% - 30 years
But Numbers doesn't show it that way. Here how it does:
So please help me. How can I do that?Hi ProCauda,
Some example data of people and their age:
The COUNTIF function will give the number of people of each age.
In another table, B2 contains this formula (and Fill Down to the bottom of B)
=COUNTIF(Table 1::B,"="&A2)
In this example, 3 people are 18 years old, 0 people are 19 years old, and so on. Use this table to calculate each age as the % of the total, then use that as the data for your diagram (graph, chart).
Regards,
Ian. -
How can i populate the Jcombobox with the data from my jpa list? Desperate
I need to populate my jcombobox with data from my jpa. This is my first time trying this and i just need some sample or a quick solution to this. Thanks in advance
<code>
public static MyNames myNames() {
EntityManagerFactory emf = Persistence.createEntityManagerFactory("JavaTrialsPU");
EntityManager em = emf.createEntityManager();
em.getTransaction().begin();
Query q = em.createNamedQuery("MyNames.findAll");
MyNames n = (MyNames) q.getResultList();
return n;
public static void myCombo() {
comboBox = new JComboBox(????--how can i make the jcombobox display my myNames() list--?????);
frame.add(comboBox, BorderLayout.PAGE_START);
</code>Implement toString() on your entity to return whatever you want to use as a label for the combobox.
Your need for quick solutions is very destructive to your learning process. In stead take the time and read around a little. Swing happens to have an excellent tutorial with many example programs readily available for you to pick through:
http://docs.oracle.com/javase/tutorial/uiswing/
And PS: you need to use \ tags in this forum. -
How can I restore all of my synced data from Firefox 4 (Win) to Firefox 5 (Mac)
Because of a computer problem, I can no longer access the data on my previous installation of Firefox 4 on a windows computer. I've recently started using a new mac computer, and I can't seem to restore the data using Firefox sync. I'm certain that sync was enabled on the previous installation as I've had it syncing with my mobile phone. How can I fix this issue?
Does this thread help? [https://support.mozilla.com/en-US/questions/824163 I want to restore my information on a computer that was recently reformatted | Firefox Support Forum | Firefox Help].
-
How can i make a Report in OBIEE, Start From Physical and Business, etc...
What's Different Between Physical Layer And Business Model, and Presentation ?
I'm New In OBIEE and i want to make a Report But i didn't understand how can i make a Physical layer and how can i make a Relationship between a Table ?Hi User,
OBIEE is not a difficult tool to understand.You have plenty of materials available in google,
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/tutorials/obiee10g-453439.html
Make sure to do some hands on by following the tutorials and then post your queries in the forum.
Rgds,
Dpka -
How can I make tree view for hierarchical data from select with connect by?
If we have selected hierachy with connect by clause, how can we make it to see in tree view?
You can't do this using the ADF, Tree Binding used by JHeadstart.
However, If you have a recursive relationship (for example managerid) you can get a tree what you want as follows:
- create one root ViewObject that returns the top-level employees without a manager by setting the where clause to managerid=null
- create a second ViewObject that simply queries all employees
- Create a ViewLink between the two view objects, and create a nested VO usage in the app module for the second view object
- Create corresponding nested group in the application definition file and set the layout style to "tree-form" on both groups.
See Developers Guide, chapter 3, section recursive trees for more info.
Steven Davelaar,
JHeadstart Team. -
How can we improve the performance while fetching data from RESB table.
Hi All,
Can any bosy suggest me the right way to improve the performance while fetching data from RESB table. Below is the select statement.
SELECT aufnr posnr roms1 roanz
INTO (itab-aufnr, itab-pposnr, itab-roms1, itab-roanz)
FROM resb
WHERE kdauf = p_vbeln
AND ablad = itab-sposnr+2.
Here I am using 'KDAUF' & 'ABLAD' in condition. Can we use secondary index for improving the performance in this case.
Regards,
HimanshuHi ,
Declare intenal table with only those four fields.
and try the beloe code....
SELECT aufnr posnr roms1 roanz
INTO table itab
FROM resb
WHERE kdauf = p_vbeln
AND ablad = itab-sposnr+2.
yes, you can also use secondary index for improving the performance in this case.
Regards,
Anand .
Reward if it is useful.... -
How can I control which apps use cellular data?
Sometimes I marvel at Apple's amazingness and sometimes I can't believe the holes. Googling around I get the impression that iOS/iPhone provides no means for a user to take control of their data plan and set which apps are permitted to use cellular data and to track cellular data usage on an app by app basis. Am I the only one that finds it unbelievable that an operating system designed for a cell phone that supports adding piles of sometimes sketchy 3rd party apps doesn't have this baked right in? There seem to be a few apps try monitor overall aggregate data usage, but they are useless at getting to the root cause.
So, I hope I'm just missing it. How do I figure out which broken, buggy, misconfigured app I stupidly installed is eating my data plan? Maybe Android is a better choice for guys like me that are too busy to play whack a mole uninstalling and reinstalling apps for hours and days to try to solve such a tedious mystery.
Thanks!This is a user to user forum.
You can leave feedback here
www.apple.com/feedback/
You could also try searching for an app that tracks data usage -
How can I transfer more than 64 bit data from host to target?
Hi all, I'm currently using PCIe-7851r fpga card to drive my device. There were 64 lines to be controlled. So what I did is generating the commands on the host pc and then transfer it to the target via DMA FIFO. The data type of the FIFO is U64, i.e. every one digit controls 64 DIO lines. But the question becomes complex when I transfer 66 line command. I tried to create 2 FIFOs, but I can hardly make the 2 FIFOs synchronized.
I think I might be able to create 2 U64 arrays, one contains the original 64 line command,s and the other contains the 2 line info (a waste). And then I interleave them in the host and decimate them in the target. There should be enough cycles to to this. But I dont think this is a good solution. Is there any better method? Thank you.
LabVIEW 2009, Windows XP, PCIe-7851R
Regards,
Bo
My blog Let's LabVIEW.
Solved!
Go to Solution.Using the techniques highlighted in this tutorial:
http://zone.ni.com/devzone/cda/tut/p/id/4534
You could use code like this:
Mark B
===If this fixes your problem, mark as solution!===
Maybe you are looking for
-
Insert 'text' in dynamic statement
Just one very simple question: I have insert into nn_nodes (lfdnr, layer_, type_) values (lfdnr#, 0, 'input');and want to make it to a dynamic Statement. How must I write the 'input'? stmt# := 'insert into nn_nodes (lfdnr, layer_, type_) values (lf
-
Hello, I am trying to config one event structure in the way I could change the range of sample graph to analyze it. I have 3 graphs. The upper is the signal input. In the middle is the signal fitted with some calculations and the bottom is the grap
-
Are there any tools that automate the conversion of SSJS to JSP?" What about a "wrapper" servlet to run the SSJS, do they exist? We are upgrading to Iplanet Web Server 6.0 and are looking for alternatives to a re-write. Alternatively is their any way
-
Retrieving Data from SQLite and make link with the ID of the retrieved data?
Hello, first of all sorry if my english is bad as im from Mexico. I using HTML/Javascript/SQLite, and im having an issue while retrieving data from SQLite, all my querys work right, but when i try to select an Id, the Name, Firstname, and Lastname an
-
Hi, I created a new entry in SCC4 for new client 100 in nw2004s and now i saved them and tried to login with 100 client sap* and password as pass, but i am not able to login with this default password for client copy.