How can I control the application log display format?

Hello all,
I am running into a problem with regard to application log display, and I don't know if we can work on the standard log profile(BAL_S_PROF) to fulfill my requirement, I would like to get you advises.
Basically, we already saved numbers of the messages for each level (Domain BALLEVEL), so at last we will get a log tree with branches hopefully. Like below:
Level 1: Check document item 01 (traffic light is Red)
   Level 2: Display success status (Traffic light is Red)
      Level 3: Display method B( Traffic light is Red)
         Level 4: Display processing status for method B( Traffic light is Red)
      Level 3: Display method C ( traffic light is Green)
         Level 4: Display processing status for method C ( traffic light is Green)
At present system determine the traffic light color of the upper level depending on the lower level status, if there is even one red light in the lower level, the upper one would be red, like in level 2. My requirement is that we need to make level 2 as GREEN, this way it is more reasonable from the business point of view because a solution has been found. I did some research for the function module 'BAL_DSP_PROFILE_DETLEVEL_GET', but obviously I haven't found a way till now, can anyone shed some light on this?
Thanks,
Derek

Hello Gaurav,
Thank You..!!! I tried appling filterFunction on the ADG and got whatever I expected but filter changes the original dataprovider behaviour. SO which I dont want to do it.
I have created a local variable and binded whatever data wanted to display on that page. Infact it works as expexted and I still have original data provider as well.
I have one more problem, I'm using creationComplete to initialize my local data provider value. It works only once while creation of state. If I navigate my screens fore and back and come back to this screen, it doesn't display the modified values as creationComplete loads only while state creation.
Is there any mothid which does the samething while vising the page every time than creation?
Thanks,
Siva

Similar Messages

HT5219 How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

You may need to set the slider at the upper-right corner of the Control window to something other than the extreme left-most position:
Hope this helps.

I have an ipod touch 2 and rebuilt my laptop. Reinstalled ITUNES and can't find my applications on ITunes after login. I tried to activate Itunes again but it didn't. How can I get my applications to display on ITUNEs?

I have an Ipod Touch 2 and rebuilt my laptop. Reinstalled ITUNES and can't find my applications on ITunes after login. I tried to activate Itunes again but it didn't. How can I get my applications to display on ITUNEs?

It sounds like you essentially have a new computer and unless you restored from a backup your iTunes library would be empty. You can transfer your iTunes purchases from your iPod to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
SInce you changed syncing computers. after you move the stuff you need to restore the iPod to factory defaults and sync the stuff back to your iPod. If you had the iPod backup file you could restore from backup.
If you have non-iTunes pruchases you can copy them to your computer by using one of the third-party programs discussed in this previous discussion:
Best iPod to PC

How can I allow the application to line through a field that has been locked after being digitally signed? We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once

How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?

You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.

How can we control the standard filed using CUF?

Hello
We use SRM Server 5.5 (SP 07)
We want to make the Price field as display on shopping cart screen.
We created CUF for PR type. We have PR01 and PR02.
If PR type is PR01, we want to make Price field as display.
So We tried to use BBP_UI_CONTROL_BADI. But this BADI is not working.
We found notes for this badi and applied this note to our system.
Notes number:
1053594
1046796
1040879
1058238
1021742
But we still have problem. The parameters IS_HEADER and IS_ITEM are not filled.
How can we control price field as display, when we choose the PR type with PR01?
Thank you,
Best Regards,
SH.

Hi,
You can use the BADI BBP_DOC_CHANGE_BADI along with BBP_UI_CONTROL_BADI.Check the Transaction type calue in BBP_DOC_CHANGE_BADI badi and acc set a flag(using SET stmt) and pass this flag to the BBP_UI_CONTROL_BADI(using GET parameter) and then change the Field property for PRICE field.
BR,
Disha.
Pls reward points for useful answers.

How can I control the zoom on my mac mouse?

How can I control the zoom function on my mouse? In the middle of working on things my hand will rub the mouse by accident and all of a sudden the context within the screen is large. I have no idea of how to work this feature on my mouse and most times to get it to return to normal, I have to escape out of the work I am performing.

If you are pressing the "Control" button on the Mac keyboard, scrolling up will zoom in and scrolling down will zoom out. You can disable this if it annoys you through System Preferences > Universal Access. If you are using Mountain Lion, it would be System Preferences > Accessibility.
Uncheck the in the "Seeing" or "Zoom" section that says "Use scroll gesture with modifier keys to zoom". It may be slightly different if you have an older OS X version. I have Mountain Lion and am going off of memory on the older versions.

How can I control the volume in a Appletv movie from my remote control App. In my IPad ?.

How can I control the volume in a Apple Tv movie from my remote control App. In my IPad ?.

There is not now, nor has there ever been a version of flash for any iOS device.
Adobe has abandoned mobile flash, so there never will be.
Browsers like iswifter or photon may work for you, but don't hold your breath.
Check app store for an app of whatever game you want.

How can I control the size of a cell in the GridBagLayout?

Hi,Swing Gurus
I am developing a swing-based program using JBulider5 enterprise.
It seems to me that the GridBagLayout is really a hard nut!
How can I control the size of a cell in the GridBagLayout?
It seems that I cann't control the size of a cell directly.
But how the size of a particular cell is determined when I switch the layout manager from XYLayout to GridBagLayout?
Thx in advance!
Regards,
Justine

hi,i have not done what you are asking but there are fields like
COLUMNWIDTH, MINSIZE, MAXGRIDSIZE, PREFEREDSIZE to which you can set the appropriate values and test for your need.hope this helped.bye martian.

How can I control the order of playback on MuVu Mix (USB 2.

What determines the order of playback of music files stored on the MuVu Mix (USB 2.0)? How can I control the order?
Apparently it is not name order. The music titles are prefixed by sequential numbers. But that is not the order that the files play back.
I tried erasing all contents, then copying the files one by one to the MuVo Mix in the order that I want them to play back (name order). But that is not the order that the files play back.
By the way, in both case, I removed the ".dat" file first. (I also tried keeping the ".dat" file, to no avail.)

SSR wrote:
> on the newer MuVos (which I would have thought included the Mix)
> it's filename order. Other than that it's hard to know, but it sounds
> like you ought to contact Support to check.
I did, and they confirmed (very quickly; kudos!) what you and I both expect: the play order is determined by the alphabetical order of the file names. The mistake was mine. I ass-u-me-d that the MSWin folder "Name ^" order was correct. I did not realize that it is not exactly alphabetical when the file name begins with a number (e.g, the track number). I had renumbered songs from a second CD by simply adding 00 to the track number. Thus, songs and 2 of the first CD are played after songs 08 and 09 of the second CD, as they should alphabetically, even though they appear in the order , 2, 08, 09 in the "Name ^" list. Klunk! Mea cupla!

How can I control the direction of Panel Page menuTabs (menu1) ?

Hi all,
in ADF FACES - JDeveloper 10.1.3
how can I control the direction of Panel Page menuTabs (menu1) either from left to right or right to left ?
regards,

In the adf-faces-config.xml file you can add a right-to-left tag.
(Right click on the structure window and choose insert inside...)

How can i control the timings of my slideshow using iphoto on my ipad

Q: 1 how can i control the timings of my pupil's slideshows using iPhoto on the iPad?
Q: 2 then how can i export them?
Q: 3 how can i combine them from 8 individual slideshows to 1 for showing to their parents at an assembly?
many thanks in anticipation of your collective help
brian

Here's my take on the same thing:
Short answer: the dpi is set when you decide what size you're printing at.
Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

How can I control the size of the af:InputText?

Hi,
How can I control the size of the 'af:InputText' on the UI, without using columns & rows attributes. Even though I am using width & height attributes, the changes are not getting reflected in the UI.
Thanks,
Rajesh.

Hi,
It is inside a 'af:PanelBox'. So, the parent container also determines the size of the child? Here I need a create a 'pidgin chat window' kind of an interface with a fixed size top-level container, inside which I willl put all my components. The code looks something like this:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" partialTriggers="it1">
<af:messages id="m4"/>
<af:form id="f1" partialTriggers="it1">
<af:panelBox text="" id="pb1" background="dark" type="stretch"
titleHalign="start" ramp="highlight"
inlineStyle="width:350pt; height:500pt; margin:0.5pt; padding:0.5pt; border-width:0.5pt; "
partialTriggers="it1">
<af:spacer height="15pt" id="s1"/>
<af:inputText id="ot1"
columns="82" rows="25" wrap="hard"
partialTriggers="it1"
value="#{ChatClientBean.chatLog}"
binding="#{ChatClientBean.outputChatTextBox}"
visible="false">
</af:inputText>
<af:spacer height="27pt"/>
<af:inputText id="it1" inlineStyle="width:200pt; height:100pt;"
valueChangeListener="#{sessionScope.ChatClientBean.sendMessage}"
autoSubmit="true" partialTriggers="it1"
binding="#{ChatClientBean.inputChatText}"/>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>
Thanks,
Rajesh.

Since I upgraded to IOS5, my Smart Playlists are in a random order. Since I use it for listening to Talking Books this makes it useless. How can I control the order of a Smart Playlist?

Since I upgraded to IOS5, my Smart Playlists are in a random order. Since I use it for listening to Talking Books this makes it useless. How can I control the order of a Smart Playlist?

It may be best to recreate the folder and the smart playlists from scratch.
tt2

How can I control the list of cipher suites offered in the SSL Client Hello message? I want to forbid MD5 and RC4.

How can I control the list of cipher suites offered in the SSL Client Hello message?
I want to limit my browser to negotiating strong cipher suites. I'd like to forbid DES, MD5 and RC4.

Set the related SSL3 prefs to false on the about:config page (Filter: security.ssl3.).
*http://kb.mozillazine.org/about:config

How can I control the order of iDVD menu items using the Arrow keys?

I have a submenu screen containing 10 selectable buttons plus the Return Arrow button. I have ordered all the slideshows in the correct order in the DVD map. However, when I run the program, the arrow keys jump the selection focus in an apparently random sequence. How can I control the order of the selection focus?
I'm using iDVD v 7.1.2
TIA.
Ron

Hi
There is one thing You might miss in iDVD - So do I - the ability to re-arrange in the DVD map (block diagram)
The order things will be pplayed or addrssed is same as the order each item is introduced into iDVD.
To my knowledge ther is no way around this.
Yours Bengt W

How can I control the application log display format?

Similar Messages

Maybe you are looking for