How can I create a clickable matrix that each cell leads to a different view?

Hi everybody,
I want to create a matrix in my Sharepoint homepage that each of its cells will be clickable and lead to different filtered results. I use Sharepoint 2010.
Currently I am thinking of creating the filtered results using views and then inserting the links of the views in a two dimensional matrix. I want this matrix to be present in my homepage and those who click on its sells will be directed to the aforementioned
views.
First I would like to know if it's possible to do this, whether there is a better way and finally how I can create this matrix. Any help is welcome!
Cheers,
Sakis

Depending on which version of SharePoint you're using, this (InfoPath) may not be the best way. Otherwise, here's how I'd do it:
Create buttons with custom look and feel... make them look like your matrix... then, use rules to "switch views" to whatever view you want them to go to based on which button they click. Buttons can be used to run rules and switch views, really
easily. Then (depending on what version of SharePoint you have... MOSS vs WSS, 2007 vs 2010 vs 2013) you could put a "Form webpart" on the home page to display your form when people visit the page.

Similar Messages

ADF & JSF : how can I create a clickable image

Hi,
How can I create a clickable object with an image property and have an action, I want to use it instead of a command button.
thanks,
Ahmad Esbita

Hi Ahmad
One way is to drop an objectImage tag inside a commandLink tag without a text attribute as follows:
<af:commandLink actionListener="#{backingBean.someMethod}">
<af:objectImage source="/someimage.gif"/>
</af:commandLink>The image is clickable raising the actionListener event.
Hope this helps.
Regards,
CM.

How can I create a master PDX that pulls from multiple other PDXs?

I process aviation maintenance manuals, with the individual manuals having their own PDX. How can I create a master PDX that pulls from the individual PDXs?
I have access to myriad versions of Windows and Acrobat so there's that...

I’ve got 100s of manuals each with their own PDX. I’ve been asked to create a master PDX that in effect combines all of the individual PDXs into a single (cross-manufacturer, cross-fleet, cross-manual-type) searchable PDX that can be easily updated.

How can you create a contact sheet that you can email?

I see that you can print a contact sheet but how can you make a contact sheet that you can email where receiver can open the thumbnails and view?

Hi,
You can either use Bridge and the Output workspace, or grab optional plug-ins for CS5 and run Ps on OSX in the 32 bit mode. (Or grab the excellent 3rd party script, Contact Sheet X, and run that in Ps. http://ps-scripts.sourceforge.net/ContactSheetX/csx.html).
Here's a post with links to further info:
http://blogs.adobe.com/jkost/2011/09/the-contact-sheet-feature.html
regards,
steve

How can I create an aging summary that shows unreconciled transactions only.

Please help experts!!

Duplicate Thread...
How can I create this aging summery in System Currency. Currently it shows Local Currency.
SELECT distinct T0.[DocNum], T0.[DocDate], T0.[CardCode]"Customer Code", T0.[CardName], t0.doctotal"Total Payment", T0.[PayNoDoc]"payment on account", isnull(t0.openbal, '0')"Not reconciled", t0.nodocsum"Total before partial reconcile", t0.nodocsum-t0.openbal as 'Reconcile Amount'
DocTotalSy TotalpaymentSC,OpenBalSc as NotReconciledSC ,NoDocSumSy as "Total before partial reconcile SC"
FROM [dbo].[ORCT] T0 left JOIN RCT2 T1 ON T0.Docnum = T1.DocNum WHERE T0.[PayNoDoc] = 'y' and isnull(t0.openbal,'0') <> '0' and t0.doctype = 'c'
Regards,
Kennedy

How can I create a jar file that will run automatically on double click

all the jars I created run only from the command-line.
how can I make it run by double-click on it?

First you will need to associate .jar files with the javaw.exe program in order to just be able to double click on the jar and run it from within a windows explorer application. Next you will need to set the main class attribute of the manifest file. My understanding is that the value of this attribute is used by the launcher to know which class to load. In other words, which is your main application class. To specify this attribute open your manifest file in a text editor. You will find this file located within the jar at META-INF/MANIFEST.MF. Then, add the line,
"Main-Class:<relative path to the main class>" However, remember not to add the .class extension to the end of the class name.
In Windows 2000 you can associate jar files with javaw by finding a jar file in Windows Explorer and right clicking it. This will give you a context menu which should have an Open With... option (if you are not using Windows 2000 and don't see the 'open with' menu item, try holding down the shift button while right click on the file). Select the Open With... option, then, when the dialog appears highlight javaw and select the "Always use this program to open these files" checkbox. When you hit the OK button you should have all your jar files associated with the javaw process.
Once you've done this, you should be able to double click on your jar file and run your application.
Regards,
Daniel Walsh

How can I create a custom formula that checks if a PC file exists? (CR10)

Post Author: lgayosso
CA Forum: Formula
Hello,
I need to create a formula that validates whether a PC file exists or not to display a message ('File Found' or 'File not found'). I created a custom formula that displays the appropriate message based on a report field composed of the FilePath + FileNameWithExtension that works correctly if the field includes a value or not (Basic Syntax below):
If {ctDocumentImages.ImgPath} <> "" Then Formula = "File Found"Else Formula = "File not found"End If
Now I want to validate that the {ctDocumentImages.ImgPath} value corresponds to an existing file; that is, I need to check that the file specified at {ctDocumentImages.ImgPath} location truly exists to determine that the file is actually 'found'. How can I accomplish this?
Any help is greatly appreciated,
Lucio

Post Author: lgayosso
CA Forum: Formula
[email protected]:
( my file connection name was CrystalReports_Reports.File Name) I have generated a report, that shows all my rpt file names, size, last updated.... etc )
Go to database expert, create new connection, select file system data, your starting directory will be
genplex\E\JEMS51_Server\Imaging\Int\2007\..... you can then report on the file names found in that directory / subdirectory, etc... When creating the link you can select all files, or just *.rpt for example
Ok, so you define more than one connection on your report to be able to access the File System Object, right? The problem is that my reports are generic and meant for distribution for customers where no generic base folder will exist. The value of the starting directoy is then unknown, FilePath+Name then can be any value.
Lucio

How can I create a new layer that is a gradient?

Hi, i'm very new to photoshop scripting and am having some trouble.
I'm looking for a way to take an image i have and set it to have a gradient opacity as it approaches the middle, my thought on how to do that was to just create a layer that is a gradient from top left to bottom right and then attach that as a vector mask.
Any ideas on how I could create this gradient layer in script, or a better method of doing this opacity gradient?
Thanks in advance,
Levianth

You could try this:
// 2012, use it at your own risk;
#target photoshop
if (app.documents.length > 0) {
var myDocument = app.activeDocument;
var theLayer = myDocument.activeLayer;
if (theLayer.isBackgroundLayer == true) {theLayer.isBackgroundLayer = false};
// create gradient layer;
// =======================================================
var idMk = charIDToTypeID( "Mk " );
    var desc15 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref3 = new ActionReference();
        var idcontentLayer = stringIDToTypeID( "contentLayer" );
        ref3.putClass( idcontentLayer );
    desc15.putReference( idnull, ref3 );
    var idUsng = charIDToTypeID( "Usng" );
        var desc16 = new ActionDescriptor();
        var idType = charIDToTypeID( "Type" );
            var desc17 = new ActionDescriptor();
            var idType = charIDToTypeID( "Type" );
            var idGrdT = charIDToTypeID( "GrdT" );
            var idLnr = charIDToTypeID( "Lnr " );
            desc17.putEnumerated( idType, idGrdT, idLnr );
            var idGrad = charIDToTypeID( "Grad" );
                var desc18 = new ActionDescriptor();
                var idNm = charIDToTypeID( "Nm " );
                desc18.putString( idNm, "Custom" );
                var idGrdF = charIDToTypeID( "GrdF" );
                var idGrdF = charIDToTypeID( "GrdF" );
                var idCstS = charIDToTypeID( "CstS" );
                desc18.putEnumerated( idGrdF, idGrdF, idCstS );
                var idIntr = charIDToTypeID( "Intr" );
                desc18.putDouble( idIntr, 4096.000000 );
                var idClrs = charIDToTypeID( "Clrs" );
                    var list3 = new ActionList();
                        var desc19 = new ActionDescriptor();
                        var idClr = charIDToTypeID( "Clr " );
                            var desc20 = new ActionDescriptor();
                            var idRd = charIDToTypeID( "Rd " );
                            desc20.putDouble( idRd, 0.000000 );
                            var idGrn = charIDToTypeID( "Grn " );
                            desc20.putDouble( idGrn, 0.000000 );
                            var idBl = charIDToTypeID( "Bl " );
                            desc20.putDouble( idBl, 0.000000 );
                        var idRGBC = charIDToTypeID( "RGBC" );
                        desc19.putObject( idClr, idRGBC, desc20 );
                        var idType = charIDToTypeID( "Type" );
                        var idClry = charIDToTypeID( "Clry" );
                        var idUsrS = charIDToTypeID( "UsrS" );
                        desc19.putEnumerated( idType, idClry, idUsrS );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc19.putInteger( idLctn, 0 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc19.putInteger( idMdpn, 50 );
                    var idClrt = charIDToTypeID( "Clrt" );
                    list3.putObject( idClrt, desc19 );
                        var desc21 = new ActionDescriptor();
                        var idClr = charIDToTypeID( "Clr " );
                            var desc22 = new ActionDescriptor();
                            var idRd = charIDToTypeID( "Rd " );
                            desc22.putDouble( idRd, 0.000000 );
                            var idGrn = charIDToTypeID( "Grn " );
                            desc22.putDouble( idGrn, 0.000000 );
                            var idBl = charIDToTypeID( "Bl " );
                            desc22.putDouble( idBl, 0.000000 );
                        var idRGBC = charIDToTypeID( "RGBC" );
                        desc21.putObject( idClr, idRGBC, desc22 );
                        var idType = charIDToTypeID( "Type" );
                        var idClry = charIDToTypeID( "Clry" );
                        var idUsrS = charIDToTypeID( "UsrS" );
                        desc21.putEnumerated( idType, idClry, idUsrS );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc21.putInteger( idLctn, 4096 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc21.putInteger( idMdpn, 50 );
                    var idClrt = charIDToTypeID( "Clrt" );
                    list3.putObject( idClrt, desc21 );
                desc18.putList( idClrs, list3 );
                var idTrns = charIDToTypeID( "Trns" );
                    var list4 = new ActionList();
                        var desc23 = new ActionDescriptor();
                        var idOpct = charIDToTypeID( "Opct" );
                        var idPrc = charIDToTypeID( "#Prc" );
                        desc23.putUnitDouble( idOpct, idPrc, 0.000000 );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc23.putInteger( idLctn, 0 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc23.putInteger( idMdpn, 50 );
                    var idTrnS = charIDToTypeID( "TrnS" );
                    list4.putObject( idTrnS, desc23 );
                        var desc24 = new ActionDescriptor();
                        var idOpct = charIDToTypeID( "Opct" );
                        var idPrc = charIDToTypeID( "#Prc" );
                        desc24.putUnitDouble( idOpct, idPrc, 100.000000 );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc24.putInteger( idLctn, 2048 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc24.putInteger( idMdpn, 50 );
                    var idTrnS = charIDToTypeID( "TrnS" );
                    list4.putObject( idTrnS, desc24 );
                        var desc25 = new ActionDescriptor();
                        var idOpct = charIDToTypeID( "Opct" );
                        var idPrc = charIDToTypeID( "#Prc" );
                        desc25.putUnitDouble( idOpct, idPrc, 0.000000 );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc25.putInteger( idLctn, 4096 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc25.putInteger( idMdpn, 50 );
                    var idTrnS = charIDToTypeID( "TrnS" );
                    list4.putObject( idTrnS, desc25 );
                desc18.putList( idTrns, list4 );
            var idGrdn = charIDToTypeID( "Grdn" );
            desc17.putObject( idGrad, idGrdn, desc18 );
        var idgradientLayer = stringIDToTypeID( "gradientLayer" );
        desc16.putObject( idType, idgradientLayer, desc17 );
    var idcontentLayer = stringIDToTypeID( "contentLayer" );
    desc15.putObject( idUsng, idcontentLayer, desc16 );
executeAction( idMk, desc15, DialogModes.NO );
// move layer below;
var theGradient = myDocument.activeLayer;
theGradient.move(theLayer, ElementPlacement.PLACEAFTER);
// clipping mask;
theLayer.grouped = true

How can I create a submit button that only saves?

Our end users will save the completed form and later upload it to anotherg place. I created a save button that works fine, but without a Submit button there is nothing to trigger the reminder to go back and answer required questions. I don't want to lose that part. Thanks in advance for any help you can offfer!

Would something like this work for you?
var OKToSave = true;
if (tfSomething.isNull) {
tfSomething.border.edge.color.value = "255,0,0";
OKToSave = false;
else tfSomething.border.edge.color.value = "255,255,255";
if (!OKToSave) app.alert("Please fill in all required fields");
else app.execMenuItem("SaveAs");

How can you create a paragraph style that removes all spaces and forces everything to lower case?

Hi,
Is there anyway of using GREP (or some other magical wizardry) to create a paragraph style that automatically removes all spaces and forces words into lower case?
Strange request i know....I'm wanting to use it for datamerged email addresses.
Thanks

so doing it through InDesign is a work around I'm exploring.
Excel has the 'LOWER' function and the ability to record macros for a quick find/replace on the spaces - so that's definitely a good option if it can't be solved purely in InDesign.
You can change case via scripting in InDesign. This AppleScript (OSX only) will set the case of the selected paragraph style to lower. It would be possible to add some code that would strip spaces as well:
tell application "Adobe InDesign CS6"
    activate
        set StyleList to name of every paragraph style of active document
    set myDialog to make dialog with properties {name:"Document Paragraph Styles"}
    tell myDialog
        tell (make dialog column)
            tell (make border panel)
                tell (make dialog column)
                    make static text with properties {static label:"Choose a Style", min width:150}
                end tell
                tell (make dialog column)
                    set myPresetsDropdown to make dropdown with properties {string list:StyleList, selected index:0, min width:150}
                end tell
            end tell
        end tell
    end tell
    set myResult to show myDialog
    if myResult = true then
        --+1 gets the correct name because list starts at 0
        set myStyle to item ((selected index of myPresetsDropdown) + 1) of StyleList
    else
        return
    end if
    destroy myDialog
    tell active document
        set myStyle to paragraph style myStyle
        repeat with j from 1 to (count stories)
            repeat with i from 1 to (count paragraphs in story j)
                if applied paragraph style of paragraph i of story j is myStyle then
                    --defines a variable to replace the generic this_text parameter in the handler
                    set SCText to the contents of paragraph i of story j
                    set contents of paragraph i of story j to my change_case_of(SCText)
                end if
            end repeat
        end repeat
    end tell
end tell
on change_case_of(this_text)
    set the_comparison_string to "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
    set the_source_string to "abcdefghijklmnopqrstuvwxyz"
    set the_new_text to ""
    repeat with thisChar in this_text
        set x to the offset of thisChar in the_comparison_string
        if x is not 0 then
            set the_new_text to (the_new_text & character x of the_source_string) as string
        else
            set the_new_text to (the_new_text & thisChar) as string
        end if
    end repeat
    return the_new_text
end change_case_of

How can I create a phase shift that will cause cross-cancellation?

I recently recorded something using a USB audio input, and after it was done realized that a cellular device had interfered with the signal and I have a terrible hiss, some clicks, cell noise, etc. in the recording. Setting a noise print and running "Reduce Noise" did more to help this file than I ever would have thought possible (thank you Apple!!), but I think I might be able to do even better.
The left channel has the audio I need, plus all the noise. The right channel has ONLY THE NOISE! Can anyone think of a way that I can use this right channel to create a cross-cancellation of the noise in the left channel? Theoretically, this should create a perfect (or close enough to it for me) file, should it not?
The phase shifter doesn't seem to have what I would need to do this, but I'm sure some audio genius out there can think of a way I can either do this manually or with a filter or effect.
Thanks for any suggestions!

Hi Glen,
IF you were to take two +identical signals+, sum them in equal amounts and flip the phase on one of them 180º to the other you will get +complete cancellation+.
According to the manual on page 221 the Process>Invert will do this.
Invert
+Choosing this command inverts the phase of each sample in the audio file or selection.+
+Each sample’s amplitude is unchanged, but the phase is inverted. In the waveform+
+display, the wave’s crests become troughs and vice versa.+
IF your R channel is the exact same noise as the noise in your L Channel then this technique could work for you.
You can test this out with any track -> put a copy of it on another track and Invert, they resulting playback will be total silence.

How can I create a cron schedule that repeats every 2 weeks on Mondays?

I need to create a cron schedule that repeats every 2 weeks on Mondays. Cronmaker.com doesn't have the cron expression for this. Please advice.
Using calendarSchedule I can do this,
var trigger = TriggerBuilder.Create()
.StartAt(new DateTime(2012, 11, 19, 12, 0, 0).ToUniversalTime())
.WithCalendarIntervalSchedule(x => x.WithIntervalInWeeks(2))
.Build();
But where do I specify it should be the 2nd monday?
mayooran99

Cron expressions available in Quartz.net library, which is used to schedule jobs through .Net code
mayooran99
Hi mayooran99,
Welcome to MSDN forums.
Since this is a 3rd-party library, we recommend that you directly contact the provider for help, or post your question in their own forums.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I create a manual activity that waits a specific number of seconds

Hi
I need to create a manual activity that waits a specific number of seconds. Is there a way to do that?
Regards

If you have a manual activity (Human Task) and you would like to define a task deadline in order to continue the process you can define it in the task definition as desribed here: Configuring Human Tasks - 11g Release 1 (11.1.1.6.1)
But if you just like to stop the process without manual activities involved you can ideed use the Timer Catch Event. See section "6.8.2 Introduction to the Timer Catch Event" in Modeling Business Processes with Oracle BPM for further details.
Regards, Danilo

How Can I create a SAP form that contains activeX report viewer?

I'm trying to create a SAP form that contains a ActiveX control to view a Crystal Report. Can anyone Help?
Thanks,
Ezequiel.

Thanks Ludek, I use this a sub to create a report document and report viewer in sap bussines one form.
Running this code shows the sap business one form with the report viewer but then closes SAP Business One Application.
which may be the problem?.
Private Sub CreateFormWithActiveX()
    Dim CP As SAPbouiCOM.FormCreationParams
    Dim fTree As SAPbouiCOM.Form
    Dim AcXTree As SAPbouiCOM.ActiveX
    Dim oItem As SAPbouiCOM.Item
    Dim CRapp As CRAXDDRT.Application
    Dim CRRep As CRAXDDRT.Report
    'Dim CRepDoc as
    ' Set the form creation parameters
    CP = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_FormCreationParams)
    CP.BorderStyle = SAPbouiCOM.BoFormBorderStyle.fbs_Sizable
    CP.FormType = "ACXTree"
    CP.UniqueID = "ACTree1"
    fTree = SBO_Application.Forms.AddEx(CP)
    fTree.Left = 10
    fTree.Top = 10
    fTree.Width = 800
    fTree.Height = 600
    fTree.Title = "Crystal Report Viewer - Argentis"
    fTree.AutoManaged = True
    ' Add the TreeView Control to the form
    oItem = fTree.Items.Add("Tree", SAPbouiCOM.BoFormItemTypes.it_ACTIVE_X)
    oItem.Left = 1
    oItem.Top = 1
    oItem.Width = 800
    oItem.Height = 600
    ' Create the new activeX control
    AcXTree = oItem.Specific
    CRapp = New CRAXDDRT.Application
    CRRep = CRapp.OpenReport("C:\Projects\Crystal Report ActiveX Viewer\Crystal\Indumetaria\Reportes\ARInvoiceMatrix_portrait.rpt", 1)
    'CRRep.RecordSelectionFormula = "{OINV.DocEntry} = {?doc_num}"
    For i As Integer = 1 To CRRep.Database.Tables.Count
      Dim ConnectionInfo As CRAXDDRT.ConnectionProperties
      ConnectionInfo = CRRep.Database.Tables(i).ConnectionProperties
      ConnectionInfo.Delete("Integrated Security")
      ConnectionInfo.Delete("Provider")
      ConnectionInfo.Delete("Data Source")
      ConnectionInfo.Delete("Initial Catalog")
      ConnectionInfo.Delete("User ID")
      ConnectionInfo.Delete("Password")
      ConnectionInfo.Add("Provider", "SQLOLEDB")
      ConnectionInfo.Add("Data Source", "Ezequiel")
      ConnectionInfo.Add("Initial Catalog", "SITKA")
      ConnectionInfo.Add("Integrated Security", 0)
      ConnectionInfo.Add("User ID", "sa")
      ConnectionInfo.Add("Password", "sa2005")
    Next
    AcXTree.ClassID = "CrystalReports102.ActiveXReportViewer.1"
    'oTreeView = AcXTree.Object
    oViewer = AcXTree.Object
    oViewer.EnableToolbar = True
    oViewer.EnableStopButton = True
    oViewer.EnableSelectExpertButton = True
    oViewer.EnableSearchControl = True
    oViewer.EnableRefreshButton = True
    oViewer.EnableProgressControl = True
    oViewer.EnablePrintButton = True
    oViewer.EnablePopupMenu = True
    oViewer.EnableGroupTree = False
    oViewer.DisplayGroupTree = True
    oViewer.ReportSource = CRRep
    oViewer.ViewReport()
    fTree.Freeze(True)
    ' Make the form visible
    fTree.Visible = True
End Sub
Regards.

How can I create a ramp function, that continuously increases the voltage over time?

I do not have the option of upgrading to a full version or version 7, so I do not have the ramp vi. How can I increase the voltage over time, because I don't think that ramp vi even has a time element.

The ramp.vi can easily be duplicated with a few wire strokes, see e.g. attached diagram image.
(Of course, in your case you don't even need the ramp output, just update the voltage in a timed fashion as shown. Just add your own trimmings).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
ramp.gif ‏4 KB

How can I create a clickable matrix that each cell leads to a different view?

Similar Messages

Maybe you are looking for