How can I create a gif slider image in PS?

Right now I have a jquery slider on my homepage but I would like to replace it with a gif image. Is this possible?

I don't see why not. Keep in mind gif is a poor format as it does only has 256 colors, one of which is used for transparency. Meaning a single shade of gray for transparency vs. 256 shades of gray for transparency in any other format that supports transparency.
I don't think I have ever used the word transparency so many time in one paragraph. LOL...

Similar Messages

How can I create a GIF file ?

Does anybody know, how can I create a Gif file with LV.
I had used the print option (Print to HTML file) from LV but I can't use it
when I
create an application with appbuilder.
Does anybody know another way to carry it out?
Thanks in advance

You understood me correctly but the properties of the documentation tool
doesnt exist
after building the application (Runtime Version). Only the Menu "File /
Print Window" option is present. Therefor I looked for another way to do it.
"Dennis Knutson" schrieb im Newsbeitrag
news:506500000005000000A24C0000-1004225886000@exchange.ni.com...
> I was talking about the properties of the documentation tool which
> creates an html file and allows for the selection of GIF as an image
> format. The GIF files are the front panel, diagram, and icon. You
> didn't specify what you are trying to print but if you need something
> else, let us know.

How can I create a java.awt.Image from ...

Hi all,
How can I create a java.awt.Image from a drawing on a JPanel?
Thanks.

JPanel p;
BufferedImage image =
new BufferedImage(p.getWidth(), p.getHeight, BufferedImage.TYPE_INT_RGB);
Graphics2D g = image.createGraphics();
p.paint(g);
g.dispose();

How can I create a high res image gallery, need to have print res photos for a pressroom section.

How can I create a high res image gallery, need to have print res photos for a pressroom section.

If you want Muse to "pass through" your images and not adjust, compress, crop etc - you need to place your images in the lightbox EXACTLY at the right size, pre-cropped and prepped in Photoshop.
So if your light box is 800x600 the image you're dropping into that must be 800x600 exactly with no effects, rotation etc added to the lightbox frame. This stop Muse fiddling with your images, if they are perfect when inserted and you're not asking Muse to crop, expand, add effects etc. If it's perfect when inserted, Muse SHOULD also leave the resolution alone too, but I have not tried that one, but in theory, it should work.

How can I create a new slide that starts where a complex animation on the previous slide ends?

I am creating a series of animations to illustrate a complex set of ideas, and I want to do it as a series of animations, to keep each slide from getting too complex. I would like to do this a stages, by creating a new slide that is a copy of where the previous slide ended. I'm hoping that some of you have done more with Keynote animations than I, and that you'll be able to give me a few suggestions. Thanks!!

Thanks, Gary. I should have mentioned that the previous slide moved and scaled several groups of objects. So, at the end of the slide's activity the groups of objects were in different positions and were of different sizes than they are when I return to the slide. So if I copy the opbject sn paste them onto the next slide, I still need to get them to the right place, and scale them. That's tricky, especially since text objects don't scale like graphic objects. Thanks for trying tohelp, though. I apprecaite your effort!

How can I create a single background image for a BorderLayout?

I can create a background with an image file for the individual panel (North, West, Center, East and South) in a BorderLayout, but I've been spinning my wheel for a long while now trying to figure out how to create just one background with a single image file for all of these panels?
In my application, a panel may contain various buttons, a listbox, a group of checkboxes, a combo box, or a canvas. Even if I used the same image file, when the panels are finally put together, one can clearly see that the end product is the result of a lot of patch works.
Hope someone has an answer for this. BTW, I'm using AWT because it works with existing browsers without the need for a separate Java plug-in.
Regards,
V.V.

Look at this :
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.awt.image.BufferedImage;
public class PanI extends Frame
     Image map;
     Panel pan;
     myPan p8,p4,p6,p2,p5;
     BufferedImage I;
public PanI()
     addWindowListener(new WindowAdapter()
    {     public void windowClosing(WindowEvent ev)
          {     dispose();
               System.exit(0);}});
     map = getToolkit().getImage("map2.gif");
     MediaTracker tracker = new MediaTracker(this);
     tracker.addImage(map,0);
     try   {tracker.waitForID(0);}
     catch (InterruptedException e){}
     I = new BufferedImage(1,1,BufferedImage.TYPE_INT_ARGB);
     setBounds(10,10,map.getWidth(null)+8,map.getHeight(null)+27);
     setLayout(new BorderLayout());
     pan = new Panel();
     add(pan,BorderLayout.CENTER);
     pan.setLayout(new BorderLayout());
     pan.setSize(map.getWidth(null),map.getHeight(null));
     p5 = new myPan(5);
     p5.setBackground(Color.red);
     pan.add(p5,BorderLayout.CENTER);
     p8 = new myPan(8);
     p8.setBackground(Color.orange);
     pan.add(p8,BorderLayout.NORTH);
     p4 = new myPan(4);
     p4.setBackground(Color.blue);
     pan.add(p4,BorderLayout.WEST);
     p6 = new myPan(6);
     p6.setBackground(Color.green);
     pan.add(p6,BorderLayout.EAST);
     p2 = new myPan(2);
     p2.setBackground(Color.pink);
     pan.add(p2,BorderLayout.SOUTH);
     setVisible(true);
public class myPan extends Panel
     int where;
public myPan(int i)
     super();
     where = i;
public void paint(Graphics g)
     if (I.getWidth(null) != pan.getWidth() || I.getHeight(null) != pan.getHeight())
          I = new BufferedImage(pan.getWidth(),pan.getHeight(),BufferedImage.TYPE_INT_ARGB);
          Graphics      G = I.getGraphics();
          G.drawImage(map,0,0,pan.getWidth(),pan.getHeight(),null);
          G.dispose();
     int x1=0;
     int x2=getWidth();
     int y1=0;
     int y2=getHeight();
     if (where == 8)
     if (where == 2)
          y1 = p8.getHeight()+p5.getHeight();
          y2 = getHeight()+y1;
     if (where == 4)
          y1 = p8.getHeight();
          y2 = y1+getHeight();
     if (where == 5)
          x1 = p4.getWidth();
          x2 = x1+getWidth();
          y1 = p8.getHeight();
          y2 = y1+getHeight();
     if (where == 6)
          x1 = p4.getWidth()+p5.getWidth();;
          x2 = x1+getWidth();
          y1 = p8.getHeight();
          y2 = y1+getHeight();
     g.drawImage(I,0,0,getWidth(),getHeight(),x1,y1,x2,y2,null);
public void update(Graphics g)
     paint(g);
public static void main (String[] args)
     new PanI();
Noah

How can I create a bootable DISK IMAGE of my PB Internal Drive?

I would like to make a bootable image of my Hard Drive but without including any Free Space.
You see all I need on the image are the OSX and the programs, NOT the 60GB of Free Space. Disk Utility however wants to create a 80gb image which includes 60GB of Free Space.
I would like to use the Bootable image as a source image to use with the RESTORE function in Disk Utility.
Regards

You'll need a second machine or an external HDD with Mac OS X installed on it.
For purposes of this procedure I'll be calling your machine the 'source' and the second machine or your external HDD the 'target'.
First either boot the source into target mode by holding down the 'T' key while it boots. Once you see the FireWire icon on the screen, let go of the 'T' key and plug the source into the target. If you're going with the external HDD route, boot your source of off your external HDD.
Now, select the drive of your source machine, and hit Apple-I to bring up the information pane. Down at the bottom (in the permissions area) you'll see a check box labeled "Ignore ownership..." Uncheck that.
Open up Disk Utility. Select the source drive and run First Aid and Repair Permissions on it.
Now, select the File menu -> New -> New Disk Image from Folder. You're going to want to hit that big "New Image" button, but don't. Trust me. It'll only cause trouble for you down the road.
Select the source drive as the source. You can leave everything else the same and click "Image".
Select the target as the destination. Click Save.
Wait for a couple of hours (depending on how much stuff you have).
When it's done, select the Images menu -> Scan image for Restore.
Select the disk image you just made and click "Scan".
When that's done you have a restorable image. Just use the restore tab to restore it.
I've done this literally hundreds of times and it's worked every single time.

How can I create a negative from image in iPhoto

I wish to create a negative from an image in iPhoto so I can print as if the negative. Is it possible to do this in iPhoto?

GraphicConverter, Pixelmator and Photoshop Elements for Mac all have the invert function.

How can I create a rotating basketball image in Motion?

I need to have a basketball rotate and do a full 360 degree. I took an image from Google Images and dragged into Motion and applied the sphere filter. Is that the best 3D looking basketball I can get from a 2D image? Thanks!
Message was edited by: Host <to correct typo in title, change it to clarify>

You need an unrolled basketball image and wrap that around a sphere...
Like this:
Patrick

How can I create a jpeg thumbnail image?

I'd like to create a clear jpeg thumbnail image of the first page of a document created in InDesign. It will be used in Constant Contact as a link to the online version of the document. (Constant Contact doesn't take JPEG's)
I especially need help making it crisp and clear.
Thank you!

And there will be occasions when it's not better, and there are alternative ways to get better results.
You may not have tested every situation and font, but I've done enough to know that sometimes it doesn't work as expected. And it wasn't a "challenge", it was an observation.
Here's 3 ways to make a JPEG - and the one that is the best is the one that was exported to PDF and then opened in Photoshop and then Saved as a JPEG.
.........Direct Export .........................Export PDF................................Export PDF
.....to JPEG.from ID.....................Open in Photoshop.............Save to JPEG from Acrobat.
(EDIT - The forum is adding extra compression to the images - I assure you the middle image is the best)

How can I view my photos in "Events" like in iPhoto? How can I create events? I have 55,000 photos and 1700 events so the only way I can possibly manage my photos is using events that are one slide in size.

I have 55,000 images organized into about 1700 events. The only reasonable way to view my library is using events in iPhoto where each event has one image That still leaves 1700 images to sort through but that is a lot easier than 55,000 images. In the side bar is a folder with "iPhoto Events" but those views still show all of the slides. How can I create events and view my photos as events as in iPhoto? Events are critical for large libraries and has been my primary way to sort images.
Thanks!

I had a problem a couple of months ago when iPhotos suddenly rearranged the order of my Events (Why won't iPhoto let me arrange my photos?) . I was told "Use albums not events - events are not a good way to organize - albums and folder are designed for organisation and are very flexible".
Haha! I should have paid attention and read between the lines! My iPhotos were highly organised groupings - not according to date but the way I wanted them - and it was so easy to do! I see now that if I had them all in albums, as per the Apple Apologist suggestion, I wouldn't have this unholy mess I have been left with just to make iPhone & iCloud users happy. I am now going through Photos and making Albums (of what used to be in my Events) ... maybe I'll get this finished before they do another non user friendly update!

ADF & JSF : how can I create a clickable image

Hi,
How can I create a clickable object with an image property and have an action, I want to use it instead of a command button.
thanks,
Ahmad Esbita

Hi Ahmad
One way is to drop an objectImage tag inside a commandLink tag without a text attribute as follows:
<af:commandLink actionListener="#{backingBean.someMethod}">
<af:objectImage source="/someimage.gif"/>
</af:commandLink>The image is clickable raising the actionListener event.
Hope this helps.
Regards,
CM.

How can I create a disk image of snow leopard installer disk from my Imac which runs it?

how can I create a disk image of snow leopard installer disk from my Imac which runs it? It came without DVD installer, and I want to make a copy of it's OS installer but can't find out how.

You need to have the disc in order to create disk image of snow leopard installer disc. What did your machine ship with? If something later than SL, then why? If earlier, then you can buy the SL installer disc and make the disk image.

How can I create a full-screen view of Keynote slide in Snow Leopard?

How can I create a full-screen view of my Keynote slides in Snow Leopard?
I'm going to be importing into ScreenFlow to create a video.
Thank you!!

Welcome to Apple Support Communities.
Do you want static screen captures or motion video of slides as titles, bullet points, and the like are presented?
Run the Keynote slide presentation in full-screen mode, then...
Static full-screen captures - use Command+Shift+3.
Static partial-screen captures - use Command+Shift+4 and use cursor to select the area of the screen to capture.
If you want motion video as builds occur, why not use Keynote's built-in Share, Export function?
(I'm on iLife '09.)
Also understand that the default slide format for Keynote is 1024x768, not full-screen MacBook 1280x800 screen size, so you'll have wide black borders unless you change the default size or crop the finished screen captures.
Message was edited by: kostby

How can I create an iBook using iBooks Author using images from a PDF?

I have a complex book with custom fonts and lots of images, and the client wants it on the iPad. So my most reasonable option seems to be to take images from a PDF and use them for the pages. However, images in iBook Author don't get "laid out" as expected in Portrait mode. How can I create a layout that is essentially one image per page in portrait mode, and then convert that to landscape mode? Or is there an easier way to go about this?

tk0us wrote:
Make sure you have disabled portrait in the Inspector.
I don't understand why portrait mode defaults images and other "widgets" to thumbnails. The original format of the book (and of 99% of all books I'm guessing) is in portrait format. By forcing the book to work only in landscape mode it's forcing the page image to be half the size, and that makes using this book particularly difficult. Is there no way to force the pages to be full-size in portrait mode?

How can I create a gif slider image in PS?

Similar Messages

Maybe you are looking for