How can I create a portal server authentication user with a batch

hi,
I am trying to import users into the portal server emulating the create user procedure as plumtree. What I cannot understand at the moment is which classes are involved in the sequence of creating a user.
the problem starts from the fact that I have used a synch WS and it works but, being the table a dummy one and the users to be authenticated by the portal server, I couldn't use that synch as a definitive.
I tryed using plumtree.server.CIPTUser class with no success. could not understand how to actually create the user after setting the parameters to the object.
Is there any documentation explaining how to create the portal server emulation of create user. this could be usefull for all those cases when there is no central repository of user and passwords.
thanks
Mario

This should get you started.
IPTUser=IPTSession.GetUsers.Create(iAdminFolderID)
IPTServerContext=IPTUser.GetInterFaces("IPTServerContext")
IPTServercontext.Store
This is a high level implementation. It should get you very close.
thanks,
Craig

Similar Messages

  • How can I create JScrollPane in my swing application with scroll bars movin

    Hi,
    How can we create scrollpanes moving with scrollbars.I tried many times with custom layout.but it does not work if i set custom layout.I hope that I will get my problem solved.
    Thanks and Regards,
    Rameh RK

    This means it is not possible to create a pure unicode file without the byte order mark?
    You wouldn't happen to know how a file with byte order mark should read on a Linux system?
    Or if this possible or not?
    Regards
    Christian

  • How can I create a web server with Java?

    I was interested in working on a program that runs through it's own port on the server similar to webmin.. Basically I'd like a light-weight no thrills web-server for the base of my program I can tweak it later. How can I do this?

    -I agree! but you dont have to re-invent the
    wheel.....Sometimes it is fun to...You only say that because you are a (lovely) nerd :)I got promoted from a "geek" to a "nerd" :)
    I agree that it is fun to implement application
    servers etc, but you also have to think about the
    cost (if some one else than you is paying for your
    time)I get lots of "paid" free time occasionally. But I haven't got as far as implementing web servers (or application servers).

  • How can I create a mobile application to connect with my php system

    II have few question to ask all expert here :
    1. Im using Netbeans IDE, how can I compile the .java file to .jar ?
    2. Currently, I have created a point of sales application using php and I hope to create a Mobile application to connect with tis system. So, anyone can let me know what I need to start ?
    3. Im using postgresql database, anyone here know how to connect with mobile application?

    !. When you build java application in NetBeans (standard one) you just click 'Build' or 'Clean and Build' and your jar file is waiting for you inside 'dist' directory of your project
    2. Connecting MIDP application to the server running PHP scripts is not a problem, just connect using simple HTTP with GET or POST and you are done, google on it!
    3. You can connect to the database using some kind of PHP/JSP/ASP or whatever application you want and then using method from point 2 to send and retrive values, you can do it with web services as well, possibilities are endless
    Hope this helps!
    Kris

  • How can I create digital signatures for my users using Windows 2008 Active Directory Certificate Services?

    Hi,
    I need to create local digital signatures for my users. How can I do that using W2k8 Active Directory Certificate Services? We are gonna sign Office 2010 documents.
    What company offers cheap digital signatures solutions?
    Thanks in advanced

    Consider the following:
    if you use your local CA server to issue digital signature certificates, there is no cost, because you are eligible to issue so many certificates as you need. However, documents signed by these certificates will be considered trusted only within your AD
    forest and other machines that explicitly trust your local CA. Any external client will not trust your signatures.
    If you want to make your signature trusted outside your network (say, in worldwide), you need to pruchase a certificate from trusted commercial CA (VeriSign, GoDaddy, GlobalSign, StartCom, etc) according to respective vendor price list. In that case you
    don't need to have your local CA server, because it is not used. All certificate management is performed by the external CA. A most common scenario is to purchase signing certificate for particular departament principals (head managers) or few certificates
    for a whole company (all documents are revised by a responsible person or persons who holds signing certificate and sign them after review).
    so, it is not clear from your post what exactly you need.
    My weblog: http://en-us.sysadmins.lv
    PowerShell PKI Module: http://pspki.codeplex.com
    Windows PKI reference:
    on TechNet wiki

  • How can I create an adaptable full-width site with sliding parallax panel?

    Hi guys!
    I have to create a web site with a full-width resolution, adaptable with any monitor and resolution using some panels that moves using the parallax scroll-motion with a sliding effects.
    For example I nedd a site like "collecdiv.com" that works with the same effects and with an adaptable full-widht size page.
    Here's some screen I take of my site with a 22" 1920x1080 resolution and a 15" 1280x1024.
    The 4 tab I want to see in full width and in scroll motion parallax: four with a resolution of 22" and the other four with a resolution of 15" (the screen are made with paint to let you see what is the problem)
    In the first tab there's a slideshow widget with some photo, in the other tabs there's a rectangular form with an image fill... I have to see the same layout that I see in my 22" monitor, in other smaller or bigger monitor (like 15") just like in the "collecdiv.com" website... The Dimension of my muse file is 960px width
    How can i resolve the problem? How can I fix the screen so anyone else can see my site without problem and with all the resolution?
    Who can help me? PLEASE
    Thanks in advice
    Francesco
    P.S.: an advise... check the site "www.collecdiv.com" to see what I nedd

    I'm adding this screenshot so you can understand the problem... The 4 tab I want to see in full width and in scroll motion parallax: four with a resolution of 22" and the other four with a resolution of 15" (the screen are made with paint to let you see what is the problem)
    In the first tab there's a slideshow widget with some photo, in the other tabs there's a rectangular form with an image fill... I have to see the same layout that I see in my 22" monitor, in other smaller or bigger monitor (like 15") just like in the "collecdiv.com" website... The Dimension of my muse file is 960px width
    Pleas help me

  • How can I share a Tiger server's User database to a Panther server?

    I need some help to set this up. Keep in mind I do not have a DNS server.
    I have a Tiger server with Xserve and an older Panther server, both on the same local network. I have a whole bunch of users setup on the Tiger server. The Panther server does not have any users setup on it. I do not want to have to type in all the users all over again in the Panther server. What I'd like to be able to do is somehow share and syncronize the user database on the Tiger server with the Panther server.
    I looked into the Open Directory settings but I do not understand what to do. How do I configure the Tiger and Panther servers respectively so the Panther server can sync with the Tiger server's users database. Is this possible? It seems like it with Open Directory, one being the Open Directory Master and the other being the Open Directory Replica? But I just don't understand how to set this up. Also the Panther OD settings seem quite different than Tiger's in Open Directory.
    Any help would be appreciated.
    Message was edited by: robocub1

    Hi
    It may be best to set up your 10.4 Server as an Open Directory Master first and then use Directory Access on your 10.3 Server to connect to the Tiger Server so as it can use the same User Database. This should be possible. OD Master/Replica relationships are not possible if the OS versions are different, even if the Master was 10.4.11 and the Replica was 10.4.10. You have no chance when its 10.4 and 10.3.
    http://images.apple.com/server/macosx/docs/OpenDirectory_Adminv10.5.pdf
    The link is for 10.5 but the basics are the same. This is a recent post that describes how to set up an OD Master:
    http://discussions.apple.com/thread.jspa?threadID=1377046&tstart=0
    I'm guessing that your 10.4 Server is Standalone and is serving simple file services only (AFP and possibly SMB/Windows). If this is the case (and I can't see how it can't be) then your users will be in the local NetInfo node. This will be the default node that is presented to you in WorkGroup Manager. You always get a warning that your are working in an invisible node (if you have not disabled this) when working in the Server's local node. Don't worry there is nothing wrong with the warning. WorkGroup Manager on Panther (10.3) Server works the same way.
    You could if you wanted to simply export the Users and Groups from WGM in 10.4 and import them into WGM on 10.3. This should save you having to key them all in again. If the prospect of configuring internal DNS Services and all that goes with it seems to much for you then this is probably the simplest option. How do you do this? Launch WGM (its the same for both versions), select the Server Menu and select Export after first selecting desired users. Do the same for Groups. Use the same procedure in reverse. The Users and Groups files are not very big and can easily be transferred using a memory stick etc.
    There are differences between the two versions which are mostly to do with Server Admin. In 10.4 Server there are more services. One of the Services will be Open Directory. In 10.4 Open Directory will only show a green light by the side of the service if it is in any role other than Standalone. Server Admin on 10.3 Server will always show the green light by the side of the Open Directory Service. This does not mean that it is an OD Master, you have to click on Settings and inspect the Role to see what it actually is.
    You should be able to connect to a 10.3 Server with 10.4's Admin tools but don't be tempted to use Server Admin to configure/change anything on the 10.3 Server. You should not be able to go the other way 10.3 > 10.4 using the same tools.
    Internal DNS Services are a requirement for LDAP Services (and pretty much everything else) on Servers generally, although for simple file services not absolutely necessary. Internal DNS Services do not have to be configured on the Server itself just as long as they are configured on another server, for example, on the same network. If these are the only two servers on the network then you will have to configure DNS Services on either one or both of them depending on what you want.
    Not available on your 10.3 Server but is on your 10.4 Server are Access Control Lists (ACLs). This is a permissions model that is in addition to the standard POSIX permissions. Think carefully about how you provide permissions to your network clients if there is a mix of client OS, 10.3, 10.4 etc.
    Hope this helps, Tony

  • How can I create a new excel workbook only with labview

    Hi everyone...
    I'm trying to create a new excel workbook only with labview but I can't find the file in the hard disk.
    Someone knows?
    Labview 8,0
    Attachments:
    Create new WB with LV.vi ‏18 KB

    You are not using the correct mechanism. Pull up the Example Finder in LabVIEW, click on the "Search" tab, and enter "Excel". Look for an example called "Write Table to XL". Use this as a starting point for creating new workbooks and adding data to it.
    Note: on disk the example is at <LabVIEW install directory>\examples\comm\ExcelExamples.llb.
    Message Edited by smercurio_fc on 06-05-2007 11:08 AM

  • How can I create packages procedure & function in user-define Library

    hi.
    i am already created packages procedure & function in database and use so on.
    now i would like to create these in library file.
    please anyone give me example of any procedure or function to store in library.
    thanks
    Ali

    <FONT FACE="Arial" size=2 color="2D0000">> please send me one simple example for create library
    then create any function in library.
    2nd is any package can be create in library or not??
    Thanks S.K
    AliHave you checked the link?
    A simple example is provided.
    I think What I understood from your post is that, you want to put function/ Proc and want to call that as Library ..
    Which is not  possible.
    For exampel an external routine is a third-generation language procedure stored in a
    dynamic link library (DLL), registered with PL/SQL, and called by the DBA to perform
    special-purpose processing.
    In Unix a dynamic link library is known as a shared object (so).
    At run time, PL/SQL loads the library dynamically, then calls the routine as if it were a
    PL/SQL subprogram. To safeguard our database, the routine runs in a separate address
    space, but it participates fully in the current transaction. Furthermore, the routine can
    make a call back to the database to perform SQL operations.
    To identify a DLL we have to use CREATE LIBRARY command.
    The CREATE LIBRARY command is used to create a schema object, library, which
    represents an operating-system shared library, from which SQL and PL/SQL can call
    external third-generation-language (3GL) functions and procedures.
    Learn something more on External Procedures
    -SK
    </FONT>

  • How can I create a Lion USB Thumb Drive with the 11E2068 build?

    It seems that the Lion build from the Mac App Store is not compatible with my Macbook Pro Retina 15''. It's seems I would need the the build 11E2068 for my USB thumb drive to work properly.
    I don't want to go through the internet recovery and loose 8 hours.
    Is there anyway for my to get that build(11E2068) on my USB thumb drive?
    Thanks,

    keg55's given you article that allows you to capture the installer. These are the critical portions:
    Once that data has been downloaded, Lion Recovery restarts your Mac, immediately installs the OS, and then deletes the installer data. The trick is to interrupt that process—safely—so you can grab the installer data and keep it. Here are the steps to take:
    IMO, Apple needs to rethink this process. Unless users with machines that had Lion preinstalled, like yourself, let Apple know this process is terrible, they'll not change their minds.
    7.  IMPORTANT: Monitor the download’s progress. As the progress bar gets near the end, get ready, because once the status reads About 0 seconds remaining, the progress bar will disappear, the installer will spend a minute or two cleaning up, and then your Mac will restart. As soon as the screen goes dark, unplug your external drive. If you wait too long, your Mac will boot into the Mac OS X installer on that drive, starting the installation process. Interrupting that process can leave your Mac unable to install OS X unless you restart it and—I’m not joking—zap PRAM.

  • How can I create a group of 5x3 buttons with a drop down meny that will slide down the 5 boxes beneath in Muse?

    I am making a porfoliosite in Muse, and want to show 5 x 3 thumbnails of my work that you can click on to see more of the same work. When you click I want a drop down box that will slide down the boxes beneath. Like on this page: http://rajoon.com/. Anyone that know how?

    Have you considered using CSS styled text/list menus instead of image rollovers.  It isn't hard really and it's actually a much better choice for   web accessibility and for search engines to find and follow your links.   Here are some links to several CSS menu systems you can try:
    CSS Express Drop-Down Menus (tutorial)
    http://www.projectseven.com/tutorials/navigation/auto_hide/
    CSS Tab Designer creates 60+ CSS Styled Button and Tab Menus  (download)
    http://www.highdots.com/css-tab-designer/
    List-O-Rama  (DW Extension)
    http://www.dmxzone.com/go?5618
    CSS  Menu Maker (On-Line Menu Generator)
    http://www.cssmenumaker.com/
    Pop-Menu  Magic2 by PVII (DW extension purchase)
    http://www.projectseven.com/products/menusystems/pmm2/index.htm
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • How can I Create custom pop up dialog box with question/answer

    I need to create a pop up dialog box that asks a question and accepts an answer input.  The form needs to be able to be emailed out (not server based)  Can someone help me do this?  I am a designer,  with very (Very!) limited coding skills.   Looks like the windjack program that I keep running into does not work with Acrobat X.
    Thanks for any help you may have

    I am not able to help you with the current method you are using - which seems an odd one in that you are using a menu script to do this????
    I would have done the page completely differently - instead of slicing it up into a vastly complex table, I'd have added the image to the page and then used an imagemap.  Then I'd have used this script to add the popups (as toolitps) that you can be as simple or as complex as you wish: http://boxover.swazz.org/.
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

  • How can I create a new game enter account with the same iTunes account

    I Created a separate gamec enter account for my two sons, I'd like to create one for my wife but I can't find a way to do it under ios8 can somebody help? Thanks

    Go to the System Preferences>Users.
    Click the lock if and enter your password, if necessary.
    Then click on the "+" symbol below the accounts list.
    From the "New Account" menu, select"Administrator" and fill in the rest of the information.
    And finally click the "Create Account" button.
    Done. A new Administrator user account.

  • How can I create a link that allows users to convert a Wiki pages into PDF format.

    I am working on an enterprise Wiki library site collection, but I want to create a link named “Convert to PDF” , which allow users to convert the current Wiki into a pdf file. I need this link to be displayed some where in all the exsiting Wikis pages, and
    on any new wiki page. Can anyone advice if there is already such as capability within sharePoint 2013.
    Thanks

    Hi,
    For your requirement, we can add this link to the master page, then it will appear in the pages which apply this master page.
    To convert the current page to PDF, you can take consideration of using jsPDF.
    The links below with demos for your reference:
    http://parall.ax/products/jspdf
    Best regards
    Patrick Liang
    TechNet Community Support

  • How can I create tables (data dictionary) on SAP Environment in BATCH mode?

    I need a Help on Table Creation on SAP in Batch Mode. I don't want to use SE11 and manually enter all 2000 table definition in the Front END. Is there any way where I can create a tables on SAP in Batch MODE. I want to create around 2000 tables, where schema is generated from external source.  As we know table created from Native SQL will not be available in SAP Application Layer.

    Hi Kenneth,
    Which version are you in? I'm on 4.7 and i have the class on my system.
    You may even try using the Function module that i had mentioned in my earlier post. That might solve your problem.
    Please write back if you problems decides to have a date with you.
    Thanks, Debasish

Maybe you are looking for