How can I create paragraph rules below a heading in InDesign CS5?

I have created a rule but the headings are appearing sometimes with a rule both above and below and sometimes only below...the display is inconsistent.
I'd be very happy if someone could tell me what I'm doing wrong here.
Here is a screenshot - note the red "Course type headings". If it's too small to see please visit this link https://dl.dropbox.com/u/17454370/paragraph_style_problem.png
Thank you, SG

THANK YOU!!!
I now have it displaying both above and below, but cannot get it to just show below. I have tried unchecking 'rule on' for rule above, but nothing changes.
SG
update: I get it; I need to play with inserting and deleting new paragraphs!
Thanks so much, Bob.
Message was edited by: sally_g

Similar Messages

How can I create a RAWpic-file with header(cluster of 8elements) and 2D Array?

I have created a cluster with 8 "I32"elements (Header). I also got picture information into a 2D array (i converted information from a ROI into a 2Darray("Image pixels(I16)")
Now I want to create a RAW picture file (first the header information followed by the picture information.)
I think I have to convert the Header-cluster into an array with "cluster to array". But even this is not possible(Info:"you cannot combine 2 different clusters"). Then I have to combine the 2 arrays with "insert into array"??? But the header array would be a 1Darray if the "cluster to array conversation" works and the picture information is 2D.
Can anyone help me please?

I think this is actually pretty straightforward, barring any byte-order issues. Attached is an image that demonstrates what I think jotthape wants to do.
The key is to let multiple Write File nodes do the work for you. There's no need to combine all the data into a single structure for the write, and avoiding that makes things easier in this case, because you don't have to worry about some of the data being I32 and the rest being I16.
Give this a shot,
John
P.S. It does seem likely that you will run into byte-order problems if you want to read your custom RAW file in using some other piece of Windows software. You can check the forum and the NI site for info on byte order, then ask a new question if you're still having a problem.
Attachments:
writeRaw.png ‏8 KB

How can you create a gutter space that moves in inDesign?

The gutter space needs to be able to slide from left to right within the page margins.
I've seen it within a document, but need to create one.
Please advise,
Lisa-renee

If you mean unbalanced column widths you can set those by first specifying the number of columns on the page, then, with guided unlocked, you can drag a pair of guided surrounding the gutter to any position you need. This only works for multiple single-column frames on a page. Multi-clumn frames can only have equal column widths.

How can I wtite a rule in OEM to find faulted composite instance

Hi All,
I am new to Oracle Enterprise Manager. I am using OEM 12c Cloud Control. I want send an alert to the administrator when ever a composite instance gets faulted. I have configured the notification method. Can you please guide me on how can I evaluate this condition or how can I create a rule to evaluate a composite faulted state and then in action I can provide the proper notification method.
Please help!!! Its really urgent!!
Thanks in Advance!

Chaitanya Babu M wrote:
yaa i'm sure about that .
i want one more instance of database.Can you perhaps explain why? I have a fair share of production and development servers - and not a single one of them needs to run more than one database instance.
So I'm interested in what requirement you are trying to satisfy by using two database instances on a single platform.
Oh yeah - if you want to create a custom XE instance (different SID, different tablespace sizes, more/less PL/SQL stuff installed, hack standard), make a copy of your XE db creation script (in your XE's +$ORACLE_HOME/bin+ and called createdb.sh ) and modify that for your needs.
PS. even with a different SID, only a single XE instance can be run at a time - you can however have 2 different ones defined and then use one at a time (e.g. testing international settings, init param differences, etc.)

How can I make settlement rule mandatory in create work order (IW31)

How can I make settlement rule mandatory in create workorder and saving without release.
I kanow we can make settlement rule mandatory upon Release order but here requirement is
Create work order (IW21) save without releasing that time settlement rule should default.

Hi,
1.If you want the settlement rule default then maintain account assignment data in technical object and when MO is created on that it would be copied into the settlement rule...
2. If you want to make those fields mandatory .... plz check up field selections in config , if you cannot find those then use SHD0 Transaction variant to make those fields mandatory.
3. Enter SHD0 , Enter IW31 in transaction and ZIW31 for transaction variant ..click create option and this takes you to IW31 initial screen , here enter required values of technical object etc and press enter and this gives you IW31 Initial scree screen variant , click continue and this takes you to inside screen and here enter required field values and on pressing enter gives you screen variant .. so you need to enter field values and check the flow of screen variants and on getting settlement rule screen variant select required option for the fields you need.
4. Finally you can save that in package created in SE80 for transporting to other client .., you can activate the variant in SHD0 -->Standard variants -->you can find activate option ..
regrds
pushpa

How can I create multiple sales orders with reference to one contract?

Hello Gurus,
Can you please how can I create multiple sales orders with reference to one contract?
thanks!
Rakesh

hi
Lets consider example
In your contract for line item 1 you have entered qty 100
You careated sales order with 70 quantity, and now you want to creat another sales order for 30
For this first you need to check what is your item category in contract (VA42)
Goto VOV7
SPRO - IMG - Sales and distribution - Sales - Sales document item - Define item categories - Go to change mode
Make the completion rule = B Item is completed after full quantity has been referenced

How can i create a new Adminstrator user account ?

How can i create a new Adminstrator user account ?

Go to the System Preferences>Users.
Click the lock if and enter your password, if necessary.
Then click on the "+" symbol below the accounts list.
From the "New Account" menu, select"Administrator" and fill in the rest of the information.
And finally click the "Create Account" button.
Done. A new Administrator user account.

How can I edit my website from another computer? and how can I create a new website next to the one, I have already? Can anyone help, please?

How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?

Move the domain.sites file from one computer to the other.
The file is located under User/Library/Application Support/iWeb/domain.sites. Move this file to the same location on the other computer and double click and iWeb will open it. Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
Just create a new site on the same domain file and it will appear below the other site. If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side.

How can I create a custom feature, which will automatically take a custom master page while creating a site ?

Hello ,
I am new in Sharepoint development . I am trying to create a Sharepoint feature to Activate master page automatically while creating the site .Below mentioned code I am using to do this .
But When I am creating any site under site collection .It is not applying automatically . I have to manually Activate that feature .
SPSite site = properties.Feature.Parent as SPSite;
SPWeb rootWeb = site.RootWeb;
Uri masterUri = new Uri(rootWeb.Url + "/_catalogs/masterpage/mycustom.master");
rootWeb.MasterUrl = masterUri.AbsolutePath;
rootWeb.CustomMasterUrl = masterUri.AbsolutePath;
rootWeb.Update();
How Can I create a feature that can activate the master page at same time of site creation under Site collection ,Without any manual work ..
Thanks in Advance ..

Hi,
You can associate master page during feature activation as follows:
http://social.technet.microsoft.com/wiki/contents/articles/19933.sharepoint-2010-set-a-custom-master-page-during-feature-activation.aspx
Then, you can use feature stapling to apply automatically on site creation:
http://blogs.msdn.com/b/kunal_mukherjee/archive/2011/01/11/feature-stapling-in-sharepoint-2010.aspx
Thanks,
Avni Bhatt

How can I create a object for a note?

Hi experts,
I need to apply the note 501905 but when I try in the SNOTE transacction I receive this error:
Object REPS Z_MRM_DELETE_PP does not exist; create it
Diagnosis
The SAP Note that you want to implement contains changes to an object that does not yet exist in your system.
SAP Notes contain only changes to objects that already exist. This means that the the system cannot automatically create new objects during the implementation of this SAP Note.
Procedure
1. Cancel the SAP Note implementationl.
2. Create an empty object REPS Z_MRM_DELETE_PP with the corresponding object editor.
3. Restart the SAP Note implementation.
How can I create that Object??
Thanks for the help!

Hi Carlos,
It says that you have to create a new program with a name Z_MRM_DELETE_PP.
Once you create and activate the program you can execute the SAP Note.
All this processure will be written in the SAP Note.
Please Go through the Note using below:
Step1: Use T.code SNOTE.
Step2: Use menu GOTO --> NOTE BROWSER. Provide the Note no and EXECUTE.
Step3: Double click on the displayed line.
Here you will get the information to do before implementing the note.
Go through all the documentation, and once you did all the development given in the note then you can implement the note.
Regards,
Sreekanth.

How can you create a writable PDF document from a PPT presentation ?

How can you create a writable PDF document from a PPT presentation ? Upper part with the image , lower part with a free space in order to take notes for students during presentation or course.
Thanks.
B

You can make a PDF file out of you notes and handouts but using the Adobe PDF printer.
Open your PowerPoint Document then go to “File” “Print”
Select ‘Adobe PDF” Printer
Under slides, select which way you want to print. Note it will not print to a printer but to a PDF file.
After then go into printer Properties and Setup PDF properties, do the following: (see second image below)
Default: PDF/A 1-b
Adobe Security: none (change as needed)
Adobe Output folder: Prompt for Adobe file name
Adobe Page size: Letter (change as needed)
Check the following check boxes
View Adobe PDf Results,
Add Document Information,
Rely on system fonts only,
Delete Log files for successful jobs.
Select OK
A pop will ask you where you want to save the document. The file extension should be PDF. After giving the file name select okay and the file should popup as a PDF. Down side is if you want to speaker notes included then you will have to do another file, like wise with just screen shots then combine into one PDF document.
I used Acrobat IX Pro. So to do this you need Acrobat IX or X Pro.
Hope this will help.
Tiger26

How can I create a VM in Brazilian Data Center

I am working on a Proof of Concept to use Cloud Services in Latin America. What I am trying to do is setup an FTP Site in the Azure Brazilian Data Center. So how can
I create a VM in the Brazilian Data Center… I do not see a way to do this through the Portal nor the Management tools. <o:p></o:p>
This question has been posted before but none of the answers seem to be satisfactory. My management does not want to spend money on a support contract until I get a
simple POC configured in this data center. So the only support mechanism I have is through the forums. For this reason I am posting this question again in hopes I receive a better answer for it.

Hi,
I guess, the Brazil Regions are available only to customers with billing addresses in Brazil.
The restriction on subscription location and access is documented here at the bottom:
http://azure.microsoft.com/en-us/regions/#services
I suggest you could contact with azure support team using the below link to get more details:
http://www.windowsazure.com/en-us/support/contact/
Also, I suggest you could use azure
powershell or
mangemnet API to create VM and set the region as "Brazil South".
Hope this helps.
Girish Prajwal

HT5312 how can i create a rescue mail

how can i create a rescue mail in order to use it to bypass the secuirity questions

You won't be able to add a rescue email address to your account until you can answer your questions, if you can't remember their answers then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset follow the instructions on the HT5312 page that you posted from :
Navigate to appleid.apple.com using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
Once you've finished editing your rescue email address, click the Save button directly below the email field.

HT5312 How can i create a rescue email

How can i create a rescue email

If you remember your answers to your security questions then follow the steps on the HT5312 page that you posted from :
Navigate to appleid.apple.com using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
Once you've finished editing your rescue email address, click the Save button directly below the email field.
If you can't remember your answers then you will need to contact Support in your country to get the questions reset, before you can then do the above for potential future use.
Contacting Apple about account security : http://support.apple.com/kb/HT5699

How can i create tables ?

how can i create a table from two string arrays (of equal length)?
I haven't found much in the documentation.
thanks
null

Hi,
Thank you for your post.
Please have a check on the below links and check if it helps you
https://msdn.microsoft.com/en-us/library/dn305849.aspx
http://azure.microsoft.com/en-in/documentation/articles/sql-database-get-started/
This link describes how to migrate a relational database to Microsoft Azure SQL Database
https://msdn.microsoft.com/library/azure/ee730904.aspx
Regards,
Mekh.

How can I create paragraph rules below a heading in InDesign CS5?

Similar Messages

Maybe you are looking for