How can I create software start and stop trigger in LabView using 6023E series DAQ card? I don't want to use the external trigger.

I am using 6023E DAQ card to collect the signals, such as AE, Force, Torque from the machine. I want to collect only some part of signal for example between start triger and stop trigger. I'd like to know how I can creat those triggers in LabView from one of the channels that I am acquiring at the same time. I found one or two library file that is only for start trigger. I know that this is availabe in some of DIAdem functions. Please let me know if you have done some example for this requirement.

If you are wanting to create a software trigger based on an analog input voltage in LabVIEW, there are several options. One suggestion would be to compare the voltage values from one input channel to a number within a loop. If the input voltage crosses that threshold (is greater than the number), have a case statement that will acquire data from the other channels. This would simulate a software start trigger in LabVIEW.

Similar Messages

  • How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk.

    How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk. Want to use internal disk drive or USD flash drive.

    Try calling 1-800-676-2775.  Give the serial number and thy *may* still burn you new install disks designed just for the hrdware in your system (for a fee, something like $160 per disk).  *May* is only because they may not burn disks for Leopard anymore.
    If they do not burn them for you, you can buy Leopard disks off Amazon or eBay for about $200.
    Have you considered Snow Leopard?.  Those disks only cost $19 (single user) or $29 (5-user license) through Apple by calling 1-800-MY-APPLE.

  • How can i create list box and  dropdown in my report?

    dear experts
    how can i create list box and  dropdown in my report?
    thanks  in advance

    Pl. see the code given below.
    REPORT Z_LISTBOX.
    Data declaration ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    TYPE-POOLS: VRM.
    DATA: NAME  TYPE VRM_ID,
          LIST  TYPE VRM_VALUES,
          VALUE LIKE LINE OF LIST.
    Selection screen ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    PARAMETERS: PS_PARM(10) AS LISTBOX VISIBLE LENGTH 10.
    AT SELECTION SCREEN OUTPUT ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    AT SELECTION-SCREEN OUTPUT.
      NAME = 'PS_PARM'.
      VALUE-KEY = '1'.
      VALUE-TEXT = 'Line 1'.
      APPEND VALUE TO LIST.
      VALUE-KEY = '2'.
      VALUE-TEXT = 'Line 2'.
      APPEND VALUE TO LIST.
      CALL FUNCTION 'VRM_SET_VALUES'
           EXPORTING
                ID     = NAME
                VALUES = LIST.
    START-OF-SELECTION.
    Regards,
    Joy.

  • How can i create a new and tableless database using database configuration

    How can i create a new and tableless database using database configuration

    How can i create a new and tableless database using database configuration
    Just don't install the sample schemas. See the installation guide
    http://docs.oracle.com/cd/E11882_01/server.112/e10831/installation.htm
    Using the Database Configuration Assistant
    When you install Oracle Database with the Oracle Universal Installer, the sample schemas are installed by default if you select the Basic Installation option. Selecting the sample schemas option installs all five schemas (HR, OE, PM, IX, and SH) in the database. If you choose not to install the sample schemas at that time, you can add them later by following the instructions in section "Manually Installing Sample Schemas".
    Choose a custom install and don't install the sample schemas.
    All other schems/tables installed are REQUIRED by Oracle

  • HT2731 I am from Nepal how can i create Apple Id and don't have VISA card?

    I am from Nepal how can i create Apple Id and don't have VISA card?

    Refer to this article:
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    http://support.apple.com/kb/HT2534

  • How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

    How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

    Target Display Mode: Frequently Asked Questions (FAQ)
    with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.

  • Can windows xp use a different sound card for itunes - I want to use a sound card for itunes and another for all other apps

    Can Windows XP use a different sound card for itunes - I want to use a sound card for itunes and another for all ther apps

    To the best of my knowledge, Windows is not capable of setting a specific sound card based on the app being used, it's all or nothing.
    Try a google search or search the Microsoft site.

  • Trying to update my apps but it keeps saying update my credit card,I don't want to use a credit card and I can't delete the one that's on my account

    Trying to update my apps but it keeps saying update my credit card,I don't want to use a credit card and I can't delete the one that's on my account

    If you're positive the information is correct, ask the issuing bank why the transaction is being rejected.
    You're getting this error because the store can not authorize the card with your bank.

  • Updated games and they have been waiting for almost 24 hours.  I don't want to lose the progress on the game by deleting and re-installing.  Any suggestions?

    Updated games and they have been waiting for almost 24 hours.  I don't want to lose the progress on the game by deleting and re-installing.  Any suggestions?

    See:
    Downloading apps stuck on waiting...: Apple Support Communities

  • How to create services start and stop automation script for diff servers

    Hi All,
    i want to create a bat file for automation purpose to start and stop services
    i have some services in 1st server aand some in 2nd server and some in 3rd servers.
    has you all know i have to follow sequences to start and stop services can any help me in creating .bat by linking 3 servers fo starting and stoping services.
    Thanks in advance
    Regards
    SM

    Hi,
    this is the list of start oder for services in 11.1.2.1 from the Installation and Configuration Guide
    1. Databases for repositories.
    2. Any corporate user directories that you plan to configure for use with Shared Services.
    3. Foundation Services Managed Server application server, which includes Shared Services,
    and EPM Workspace.
    4. Reporting and Analysis Framework — Agent Service (if required for your environment)
    5. Reporting and Analysis Framework Application Server (if required for your environment)
    6. Web server
    The remaining services and processes can be started in any order:
    1. Performance Management Architect Services
    2. Performance Management Architect application server
    3. Performance Management Architect Data Synchronizer application server
    4. Essbase Server
    5. Administration Services application server
    284 Starting and Stopping EPM System Products
    6. Integration Services Server
    7. Essbase Studio Server
    8. Provider Services application server
    9. Financial Reporting Services
    10. Financial Reporting application server
    11. Web Analysis application server
    12. Calculation Manager application server
    13. Planning application server and the Hyperion RMI Registry
    14. Financial Management service
    15. Financial Management Web application server
    16. Strategic Finance service
    17. Performance Scorecard application server
    18. Performance Scorecard Alerter application server
    19. Profitability and Cost Management application server
    to start services on different servers you can use the sc command in your batch file
    for eg
    sc \\10.121.201.21 start HypS9FrameworkAgent

  • How can I create a DVD and/or share (email, etc.) a slideshow I created with iPhoto?

    How can I create and/or share a slideshow I made with iPhoto?...Thanks!

    I am sure there is a way however I don't use iPhoto, you may want to repost on the iPhoto forums which is where the iPhoto gurus hang out.

  • How can I create new carriforwarede and Brodforwarded wage types

    Hi Gurus
    We had one wage as special compensation.that has been done for to update in IT0014. 
    Now new requirement is came that special compesation was type they would like to update in IT0008.  I have all the necessary configuration. its working fine.  now client wants to create Brodfowarded and Carryforwarded wage types for this wage type.
    Pls let me know how can I create these.?
    And where should I have to map this?
    Is it scheema level job or not?
    pls asap.
    Regards
    suresh

    Hi Navya
    Thanks for your replay
    Can you pls some elobarate this.  becasue of I have not all done schema changes till now.  here we have been using IN00 schema.
    Can give some brief explanatation how can I do this.  I have been wiating for you valuable replay. pls
    Regards
    Suresh

  • How can I creat or open an excel file in labview?

    I am using Labview 7.1 and report generation toolkit. I got the example code from this address :"Creating a report in Microsft excel using the labview report generation toolkit"
    But seems this example only can creat report when the excel file exist, otherwise it will get error code 7.
    How can I creat a new file if it doesn't exist and open the file if it exist? Can I creat a report without openning excel because I need to creat more than one report and check it after the test.
    Thanks

    Simply use the "Open/Create/Replace File.vi, and wire a constant "Create / Replace".
    Wire a path/filename and make sure the name ends with the extention .xls
    If you have multiple lines (likely), place aech line in an array and use the "Array to Spreadsheet String.vi" before sending it to "Write to file.vi". Don't forget to close the file.
    Hope this helps..
    JLV

  • How can I create a black and white image similar to what I see in the "Replace Color" tool?

    Hi all, I'm just wondering how I can create a black and white image similar to what I see in the preview window of the "Replace Color" tool. See attached screenshot for clarification -- I need the grass to be black while the soil is white or vice versa. Any tips?

    One way is to use Select>Color Range
    Make a new Color Fill Layer>White
    (Layer>New Fill Layer>Solid Color)
    Put a new color fill layer below>black
    Just invert the layer mask on the top fill layer for the opposite effect.

  • How can I creat virtual channel and traditional devices while my card installed,I can not do?

    I installed PCI-6220 card,and I also installed DAQmx and Traditional DAQ in my computer,
    but I cannot creat virtual channel at the last step(attachment:TDAQ6220.jpg).
    Maybe this is the reason I didn't creat traditional NI-DAQ Device,but I can not creat it.
    (see attachment: DAQ Device.jpg,there is no PCI-6220 on list).
    What's wrong?What shall I do?
    Junwei You

    Hello Rainer,
    You can see this attachment(6024E.jpg),the 6024E card appears on Traditional NI-DAQ Devices,
    but I don't know how can it be created(I don't creat it,we buy the whole system together with the machine).
    I tried create a new traditional Device(I want to confirm 6024E), but still I can not see any NI-DAQ device in traditional NI-DAQ device
    lists. See the 'Create New....' interface.How can do it?
    Thanks!
    Attachments:
    6024E.JPG ‏128 KB

Maybe you are looking for

  • My Firefox will not open - it just spins. Can't do anything. Help!!!

    Have been happily using Firefox for years. When I shut down my computer today, I had to force quit Firefox. I'm on a Mac. Once I turned it back on it will do nothing. Have reinstalled the software. When I try to open it I get this message (see attach

  • Duplicate database

    hello friends, my requirement is that, i am running some sites with oracle database. but , at same time i want to configure a mirror database on different host. suppose in case primary database fails then we can up the mirrored database. my objective

  • How to read ecel sheet and insert into oracle table

    hi all, am working on forms builder 6i. and i want , from a trigger to read from a a sheet excel file the data and insert into a table that i had aleady created. i whrite a code that can till now open the excel file but i cant read the data to insert

  • Problem installing Elements 6.0

    In trying to install PSE 6 I get the following error message: "Startup Error - Required resources missing". If anyone else has seen this and/or has a possible solution I would be grateful for your help.

  • Trying to re install apps

    I had to restore my IPAD and am trying to reinstall some previously purchased apps but they will not install...just say "waiting" I have tried deleting and reinstalling, restarting the iPad...no help..