How can I, depending on the elemnts of an array, write into the same array
Hi everyone, to make this a little clearer, consider a 2*2 I8 array, many y objective is the following:
1) connect the array to the case structure, and depending on a specific case that's value of element of indeces (0,0), write over the same array in this way
1 0
2 3
for example, note that in (0,0) there's 1, so my decision is to make the array (same array) as:
0 0
2 3
any ideas?
Thanks.
T. A.
toniaz wrote:
... should I add the array itself inside the loop or should I add its local variable?
The array data is in the shift register or wire!
Any controls or indicators of the array just lets you interface to it via the front panel. Don't use controls or indicators as data storage via local variables, that's not the right way.
Here's a very simple demo (LV 8.0) that shows one possibility how to do this. See if it makes sense.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
changeArrayElement.vi 18 KB
Similar Messages
-
How can i use in the same time input line and mic to recorder in several track whit SONAR
I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my englishLIMACAR wrote:
How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english
Depending on which soundcard you have there, but if your card is capable for
ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
MME32 - > same w/ WDM/KS
If you use Asio4All --> same w/ WDM/KS & MME32
No mic and line source simultaenously w/ WDM/KS and MME32.
You perhaps be able to do this w/ kX drivers.
jutapa
ADDED:
You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM -
How can I save to the same map every time when printing pdfs?
How can I save to the same map every time when printing pdfs?
Finder points to the document map even when I chose a different map recently.
I often print series of pdfs from the print dialog box, I'd like to choose the map to save to and then have all subsequent pdf prints automatically directed to the same map until I decide otherwise.that link seems to be broken right now:
403 Error - Forbidden - No cred, dude. -
i have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?
Hi,
Have a Look at these Links on Home Sharing:
http://support.apple.com/kb/HT4620
http://support.apple.com/kb/HT3819
Could be what you need...
Cheers, -
i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created. As i dont have the access to the earlier id anymore.
You cannot. The apps are assigned to that Apple ID and there is nothing you can do to change that. You could choose to download them again with the new Apple ID, any paid apps will need to be purchased again.
Hope that helps. -
Hi. I purchased a new ipad mini and my brother already has iphone 4,so how can i avoid sharing the same contents that are on his phone? Will creating an other apple id help us in seperating our facetime and icloud accounts as we share our laptop to sync ?
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.
Have the project, events and media on one drive which is common to both macs.
You can download FCP X to both macs using the same Apple ID that it was purchased with.
Andy -
I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?
It says that my DHCP has to be changed! How? to what?
It is 802.11g.express. but is set to default by the computer (Macbook Air).
The other is 802.11n. (express)
Extreme is 802.11.g. Is the Main Airport.
It is on ethernet & wep 128 security. -
How can I return to the same position in the calling order details form
I am Calling a form for creating a new item from order details form, so after creating The new item I want to returned the item code to the calling form to same position in The order details form , how can I return to the same position in the order details form
Waiting for your valuable answer .
Best regards
Jamil AlshaibaniDear Friends
My actual problem description as the following
I have a form for production order screen , and this form contain header and details blocks , so the user in the details will select Type Code , and he will go the next field that is Item Code Field search for specific Item Code if it is not exist he has to call the Item Definition Form by using this script
CALL_FORM(ITEM_DEFINITION);
Then when he finished defining the Item , and I assign the item code as the following in the :
WHEN-BUTTON-PRESSED TRIGGER
:GLOBAL.ITEM_CODE_VAR := :ITEM_CODE;
DO_KEY('exit_form');
But I don't know where to keep this assignment
:ITEM_CODE := :GLOBAL.ITEM_CODE_VAR;
inside the caller form in which trigger do I have to use when it return from the caller form it should assign the :GLOBAL.ITEM_CODE_VAR to the :ITEM_CODE and the cursor it should show inside the ITEM_CODE , and as I mention it does not return to the same location of The ITEM_CODE when it return from the calling form
Waiting for your valuable answer .
With example please .
Best Regards
Jamil Alshaibani -
I downloaded a song that I purchased from the ITunes store, but the song does not play properly. How can I re-download the same song without having to purchase it a second time?
I could not find an option to "report a problem".
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
How can i buy again the same software from the same mac? (where it is installed and runs ok: it is for licences issues)
Thanks for your help.Hi ..
You can redownload previously purchased apps from the App Store using the same Apple ID on all your authorized Macs for free.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase. -
How can I buy again the same song ?
How can I buy again the same song ?
Hi ..
You can redownload previously purchased apps from the App Store using the same Apple ID on all your authorized Macs for free.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase. -
I called the big webdesign file "(X)" and the image I wanted to paste in it "(Y)",
so that you won't be confused when you read it.
What Happened
For the design of a webpage, I made a photoshop-file(X) with a lot of squares(X). These squares(X) had the size 9,42×9,42 centimeters.
I measured the squares(X) carefully and also made sure the size was in centimeters, so I am sure that the size was 9,42×9,42 cm.
My plan was to fill the squares(X) with pictures(Y). I had a map on my computer with a lot of square-sized JPG-images(Y) in it. All I had
to do was open the pictures(Y) in photoshop, change the size into 9,42×9,42 centimeters and copy+paste them into the squares(X)
of the webdesign. I did this before and it worked perfectly.
But then, I opened one of the images(Y) and when I wanted to resize it, the resize-tool said it was only 3,25×3,25 centimeters big.
I thought it was strange, so I copied+pasted it into the design-file(X) with all the squares(X) that needed to be filled. Allthough photoshop
had told me that the squares(X) in the file were 9,42×9,42 centimeters big and the image(Y) I resized was 3,25×3,25, the "small" image(Y)
turned out to be bigger then the squares(X). And when I resized the "small" image(Y) into 9,42×9,42 centimeters, it was even bigger
than it was before. How can this be, and how can I still make the images(X&Y) the same size?
What I already tried
- I made the file of the webdesign(X) with all the squares(X) into one layer, copied the file(X) and opened a new file(X) with the same
measurements of the old file(X). I also changed the resolution of the file(X) into pixels/centimeters instead of pixels/inches.
Then I pasted the image(X) of the old file into the new file. I didn't work; the image(X) that I pasted in the new file was bigger and
when I pasted the other picture(Y) in this image, the same problem was still there.
- I also opened the picture(Y) in photoshop, made a screenshot of it and then pasted the screenshot into paint. With paint I cropped
it again and saved it as a JPEG-file. After that, I opened the image (Y) in photoshop again. It now had the size of 11,27×11,27 centimeters.
Then I resized the image(Y) into 9,42×9,42 cm, but it still wasn't as big as the squares(X).
Could you help me please?
I really don't understand why this problem is happening and I can't think of a solution because I am still quite unexperienced with photoshop
and I also couldn't find the answer on the internet. I assume the solution is very simple, but I haven't found it yet allthough I have to finish this
project soon and I also have to use the image(Y). So any help would be very appreciated.
Thanks,
SimoneYou need to understand the basic of a digital image.
Image is recorded as pixels and image is a rectangle so many pixels wide and so many pixel high. Pixels do not have a fixed size. The images resolution setting defines the image current pixel size.
So for example if you have and image that is 300 pixel wide and 200 pixels high and set its dip resolution to 100DPI the image size is 3" wide and 2" high. Set its dip setting tp 300DPI the image size becomes 1" wide by 2/3" high. Both the 3" x 2" and the 1"x2/3" images have the same 60000 RGB Colored Pixels.
Web pages are sized to to be so many pixel wide and so many pixel high. Often the height is not enforced scrolling is used when viewing.
However image for web pages often must not exceed so many pixel wide and high for displays have a fixed resolution and a fixed number of Pixels. You want images to fit on users displays. Users use different displays some have high resolution displays and other have low resolution displays with far fewer pixels then high resolution displays.
Web Image are normally image that have been interpolated down in number of pixels a resampled large image so that web image will fit on a low resolution display with limited number of pixels. The image size the user see depend on the display they are currently using. A low resolution display's image will be much larger then the same image displayed on a nexus 10 with a 300dip display. Cheep low cost Desktop LCD have a 84DIP resolution, large high cost desktop displays are not be much higher in resolution somewhere near 108DPI. Tablets, Laptop and Phones can have much higher resolution like the nexus 10 300DPI IPS display -
My wife and I both have iPhone 4 phones. Neither of them have been upgraded to OSI 5. We share the same Apple ID to buy things, etc. We are planning to buy an iphone 4s for our daughter next month. We would all like to share the same Apple id so that we can make purchases from the same account ... that way we only fund one account. We would like to upgrade to OSI 5 and keep/share the same Apple id but be able to set up different iCloud accounts for when we sync our phones. How can we do that? One other thing, we like being able to fine our locations on the same screen (and would add our daughter) using Find My Phone. Can we still do that? Thanks in advance for your help.
You could and should set up different iCloud accounts in "Settings > iCloud", so that every user has its own email account, calendars, reminders, notes, storage for backups and app data (files etc.), by the way everyone could also use his own account for iMessage (Settings > Messages > Send & Receive) and FaceTime (Settings > FaceTime) so that you all could write and call each other.
Next the Apple ID for music, apps and other media: You all could just set up the ssame Apple ID in "Settings > iTunes & App Stores" for all your media purchases like songs, movies, apps etc. -
My photo stream on my iPhone 5 has 721 photos in it. But my photo stream on my macbook air has only 211 photos in it. The accounts do seem to be sync'd, because when I delete a photo from a stream in one device it gets automtaically deleted in the other device in 2 seconds (works both ways when I delete either from my phone or my mac).
Can anyone point me in the right direction on how to completely snc them up?
Thanks!The Photo Stream does not really sync. The contents of the Photo Stream (My Photo Stream) for each device will depend on the contents of the camra roll and on the current state of what has been uploaded to iCloud when you turn the Photo Stream on the device. Photo Stream is not meant to be a storage for photos in the cloud, just a transient buffer. If you want a stream of photos, that is the same on each device, set up a shared Photo Stream.
See: iCloud: Photo Stream troubleshooting
iCloud: Using and troubleshooting Shared Photo Streams
Regards
Léonie
Maybe you are looking for
-
Satellite A305-S6825 - HDD light flickers sometimes
I have the Toshiba Satellite A305-S6825, which I bought back in April. 250GB and 3GB Ram. I notiice sometimes when I am not working on it that the Hard Disk drive light is flickering for some quite some time. Is this normal? I don't have any programs
-
I upgraded to Mountain Lion and now my computer keeps freezing. How to fix?
I upgraded to Mountain Lion and nowmy computer keeps freezing. How do I fix this?
-
How can we assign Extract Structure of datasource to request to transport
Hi, I was trying to transport datasource. But it ended with errors due to unavailability of extract structure. So plz guide me how I can assign Extract structure of datasource to request to transpport. I tried to assign in RSA6 but here there is no o
-
I have some movies/videos in my iTunes library, but I don't understand how I should be tagging them. Should I be filling in the Artist, Album Artist and Album fields? Movies don't have "Albums" or "Artists", so it doesn't make much sense. For those o
-
Gnome 3 launcher customization
I use Gnome 3.4 on ArchLinux. How I can move the Gnome launcher called "Activites" from the left side of screen to the right?