How can I do two consecutive HTTP calls?

Hi all.
I have an application installed and I can't change its code. This application is a search engine.
The application forces any user to log in, although the user id is never used for nothing.
I want to make a direct search, so the users can write the words to search and get directly the results.
For example:
-The user writes "journal" and calls my servlet.
-My servlet makes a sendRedirect to "http://app:port/login.do?userId=guest"
-The application returns the page "http://app:port/search.do" with the user loaded in the session.
-Now comes my problem: I want to do another sendRedirect to "http://app:port/search.do?queryString=journal"
Like the application gives the control to the browser, Im not able to do another call. Making a second sendRedirect throws an IllegalStateException.
I have tried to use the Jakarta HTTPClient, and it works, but after getting the results, I can't call the application, because I have logged with one session and doesn't recognize me. And I can't simulate all its behaviour.
I hope to have explained clearly. I apologize for my bad english.
Thanks in advance.

The problem is you are not continuing the session.
For every request you shoudld take the cookie which has the session id that is send with the response and send that cookie back to the server in the next request. Then the server will process all the requests in the same session.

Similar Messages

  • How can I make two face time calls simultaneously like they did on the recent episode of Modern Family?

    When I make a Face Time call there is no ability to make another call and conference the second person it. However, on a recent episode of Modern Family they were able to do just that.

    I havn't got it, but have you tried the Skype for iPad app ? - http://itunes.apple.com/us/app/skype-for-ipad/id442012681?mt=8#

  • How can I share two differents Itunes accounts in my Apple TV ? I have one and my wife has another account and we want to share both in our apple tv. How can I do this ???

    How can I share two differents Itunes accounts in my Apple TV ? I have one and my wife has another account and we want to share both in our apple tv. How can I do this ???

    I assume you have different iTunes collections on different PC's, or on different logins on the same PC?  If that's the case then just enable "Home Sharing" in each iTunes using the SAME iTunes username and password as you enabled home sharing on the Apple TV with. The account used for home sharing is NOT the same as the account used to access the iTunes store, so as long as you use the same account (pick one, doesn't matter which) then you should see both of yor iTunes libraries on the Apple TV. Note - each iTunes has ti be running in order for the Apple TV to see the library.
    Here's some details on how to do it:
    http://support.apple.com/kb/HT4363

  • How can I copy file/folders from and to hard drives? How can I have two or more windows of explorer so that I can drag and drop from one hard drive to another?

    Hi,
    I am a new customer (purchased last week) of MacBookPro (latest) and its my first ever Apple laptop.
    I am almost lost to find the operating tools.
    1. How can I copy files from hard drive to computer and vis-a-versa?
    2. Only can browse one but how can I have two or more browses at the same time like in MS windows?
    3. No right click works on track pad?
    4. Is there application/ program compatible to MS office? If so how much and how can I purchase?
    5. Is there AutoCAD program that is compatible to MS Window AutoCAD? and if yes how much and how can I purchase?
    I will very much appreciate if you could email me the with the solution/answers please.
    Regards,
    Khagendra Limbu

    1) For some reason this happens once in a while with FAT32 enabled external harddrives. I have no idea why this happens but it most easily solved by reformatting the drive. First make sure you've copied everything from the external drive to your internal harddrive. You've done this earlier so I assume you know how to do this.
    Now the reformatting part. Open Finder and go to Applications. Look for the folder called "Utilities". Click on it. In it you find a program called "Disk Utility". Click on it. Now look for the external drive. You probably see two entries for the disk. Click on the one that contains the name of the drive NOT the one that describes the disk (Like for example 320.07 GB Samsung S2 Portable Media).
    Now you see four tabs in the righthand part of the window. They're called "First Aid", "Erase", "RAID" and "Restore". Click on "Erase". This opens the tab with (amongst others) a dropdownbox (Format) and a textbox (Name) . In the dropdownbox select "Mac OS Extended (Journaled). Take note! This selection disables usage of the drive with Windows PC's. If your goal is to share the drive with Windows PC's select the MS-DOS FAT option.
    Enter a label for the drive in the textbox Name. Now click on the button "Erase". This will format the drive.
    Now when it's done you can copy back all the items you've copied to your internal harddrive earlier.
    2) Opening two windows like Explorer on Windows is opening two Finder windows on the Mac. Simply click on the background. In the menubar you items like 'Finder", "File", "Edit", "View", et cetera. Click on "File" and "New Finder Window". Do this two times. Alternatively you can click on the background and press CMD-N two times.
    3) You can right click on the trackpad. This however depends on if you've enabled the feature in System Preferences. In the topmenubar click on the Apple icon and select "System Preferences". Now look for Trackpad in Hardware. Click on it. You see three tabs with the names "Point & Click", "Scroll & Zoom" and "More Gestures". Select "Point & Click" and look for "Secondary Click'. Make sure it is checked and make sure it has written "Click or tap with two fingers" written beneath "Secondary Click". When you're done exit System Preferences. Now select the background and tap with two fingers on the trackpad. This should open the contextuel menu with options like "New Folder", "Get Info" et cetera.

  • How can I transfer two user names from an iMac to a new macbook?

    How can I transfer two user names from an iMac to a new macbook?
    got a new laptop and need to transfer two usernames to it, complete with all documents help?

    Assuming you haven't already set up a user, the easiest way is to use the Setup Assistant during first boot of the new Mac, with the two Macs connected by firewire.
    You'll be prompted to migrate from a choice of sources - choose "from another Mac", select the catagories of data you want to transfer and follow the instructions.
    More info here, in Pondini's FAQ; http://pondini.org/OSX/SetupAsst.html

  • When I facetime the ipad (email address) it calls my phone. The accounts are completely separate. How can I get this to only call the ipad and not my phone as well?

    When I facetime the ipad (email address) it calls my phone. The accounts are completely separate. How can I get this to only call the ipad and not my phone as well?
    It calls both the ipad and iphone when calling the associated email address for the ipad. However, when I call the iphone it does not call the IPAD.
    Thanks for your help

    Are you trying to message another Apple device?
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
     Cheers, Tom

  • How can I attach two extra monitoe to an IMac and have them work independently of the INas nonitor where I can place a document and manipulate it independently?

    How can I attach two additional monitors th an IMac and be able to place documents in either one or all three and manipulate them independnetly from one another without affecting the others?

    On the vintage machine you have you would need something like:
    http://www.matrox.com/graphics/en/products/gxm/dh2go/
    However if you bought a new 27" iMac they have 2 video outputs that will work with Thunderbolt or MiniDisplay port outputs to external monitors.

  • How can I compare two summary field in cross-tab?

    <p>Dear expert:</p><p>I have one question for how can I compare two summary field in cross-tab?  I have following cross-table:</p><p>Type          Sector1     Sector2    Sector3       Total </p><p>Outlook         10            11           9              30         </p><p>Target            5              3           1               9</p><p>I want to compare the summary field(total) relationship percent, I want to get "9/30". Someone told me I must create the DB view or table via SQL, then can implete in Crystal Report. Can I implete it in Crystal Report via fomula or other function?</p><p>Thanks so much for your warm-hearted help!</p><p>Steven</p>

    Hello Steven, yes you can compare summary fields, If you are comparing Summary to Target, or vice versa - you can do it within Crystal Reports.
    1. In Suppress conditional formula, create 2 Global variables: CurrentOutlook and CurrentTarger and get the current value.
    2. In Display String formula for Total show ToText(CurrentTarget/CurrentOUtlook) + "%".
    For more difficult cases of compariing fields in cross--tab, you may look into http://www.relasoft.net/KB10001.html.
    Best,
    Alexander

  • How can i give two tcode in same program

    Hi all,
    How can I give two tcode to the same program in which two conditions call in that two t codes
    how can I do so please help me for that.
    Ketan
    ABAP consultant

    hi,
    In your case, if the calling of the two transactions is mutually exclusive,
    then
    IF
    call transaction 'A'.
    else.
    Call transaction 'B'.
    endif.
    else,
    if you need to call the transactions one after the other,
    CALL TRANSACTION 'A'.
    CALL TRANSACTION 'B'.
    Thanks
    Sharath

  • How can I block a number that calls me persistently every single day but only shows 3458  it does not show the full 10 digit

    how can I block a number that calls me persistently every single day but only shows 3458  it does not show the full 10 digit so on your block page will not let me block it!!!  So frustrated and I am not answering it with all the hackers out these days I don't want to give them access to my phone.

        @lottsandy
    I can understand your frustrations and concerns with receiving these unknown calls!  I would love to assist you with preventing these types of calls.
    Sounds as though you're receiving some type of telemarketing call.  Although you're unable to add the shorter numbers to your call block list, you can definitely add your number to the National Do Not Call registry http://1.usa.gov/1whONxp.  I hope this will help prevent those unwanted calls.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • HT204053 how can I merge two Apple-IDs?

    how can I merge two Apple-IDs?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Apple will not merge two Apple IDs, nor will Apple transfer content from one ID to another.
    http://support.apple.com/kb/HE37

  • How can I block all incoming international calls?

    How can I block all incoming international calls? 

    Verizon does not value me as a customer because they would not assist me with getting the blocks done. The services Verizon offered, "Family Base" does not block what I and many, many, many, more verizon customers need.  The APP is working GREAT! In the 1st two days it blocked over 25 unwanted solicitations from India. It blocked "unknown", Private, 1234, 123456789566, 000-000-0000, and other 10 digit numbers! NOKIA has done a fabulous job with the developement of their APP. Verizon could block these calls but is not willing to do so and in the process try to sell me a product that wouldn't work.

  • How can I draw two differenct plots at the same graph?

    [I am beginner]
    I have two different set of data which have differenct x-axis values. How can I draw two data at the same plot?
    For example, one data set is
    x y
    1 3.5
    3 2.3
    5 1.3
    8 3.2
    The other
    1 2.3
    2.5 5.4
    4 2.5
    If I use m_graph.plotXvsY two times. But it draw only one graph at the same time.
    Please let me know. Thank you in advance.

    Do you really need the two sets of data on the same plot or is what you really care about is that the two sets of data are in the same graph? If it's the former, then there's not much that you can do since a plot can only contain one set of data. You can append to an existing set of data by calling the corresponding Chart (for example, ChartXvsY) method, but the result is that the plot's data will appear continuous.
    If it's the latter, the way to do this is to add multiple plots to the graph and plot each set of data in a separate plot. For example, go to the Plots tab in the graph's property pages, add another plot, then here's some sample code that demonstrates how to plot the sets of data from your example above:
    double xData1[] = { 1, 3, 5, 8 };
    double yData1[] = { 3.5, 2.3, 1.3, 3.2 };
    CNiReal64Vector xDataSet1(4, xData1), yDataSet1(4, yData1);
    m_graph.Plots.Item(1).PlotXvsY(xDataSet1, yDataSet1);
    double xData2[] = { 1, 2.5, 4 };
    double yData2[] = { 2.3, 5.4, 2.5 };
    CNiReal64Vector xDataSet2(3, xData2), yDataSet2(3, yData2);
    m_graph.Plots.Item(2).PlotXvsY(xDataSet2, yDataSet2);
    Hope this helps.
    - Elton

  • How can I link two accounts on Behance: Adobe ID and earlier?

    I have some troubles with my old behance account created before Adobe ID subscription -- can't sign up. How can I link two accounts?

    You should probably ask in Behance
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • How can I have two itunes accounts on one computer?

    How can I have two itunes accounts on one computer?

    Not sure what you mean.
    An account is a user name and password.
    Sign into whichever account you want to use for purchasing.
    Authorize the computer for both account to listen to the content.

Maybe you are looking for