How can I extract non-cumulative cube data to another cubes ?

Dear Expert,
         I copied inventory cube 0ic_c03 to a new cube : ZIC_C03 , then I loaded the data of 0ic_c03 to the new cube ZIC_C03 .
the loading was sucessful, but the result of report of the ZIC_C03 was not correct. After looking into the problem, I found out
the new cube can successfully extract data related with "Goods movement" & "Revaluation", yet the extract of "Open Balance" does not seems to work.
         I have read through Note:375098, in which I could not find (InfoObject 0RECORDTP) in my start routine as mentioned in the solution
,and the note was not mentioned valid for BW 3.5 release.
         How can I extract non-cumulative cube data to another cubes correctly in BW3.5 release SP20?
   Thanks !

Hi,
Check Routines in Update rules wether same code is wrriten in new cube
cheers,
Satya

Similar Messages

Copy one cube data into another cube

Dear SDN's,
Can anyone tell me how can i load the data from one cube to another cube request by request.. Like, I need all the requests available in first cube should appear in the new cube which i want to load the data.. How can i do this..Kindly advice me...
Answering getz appreciated,
Warm Regards,
Aluri

Hi Aluri,
Well you want it request by request.
That does not make it easy.
The only thing I can think of is to
- empty the source cube,
- reconstruct the first request,
- do an init to the new cube,
- reconstruct the next request,
- do a delta,
etc.
but, depending to the number of requests this is a lot of work.
Udo

How to create a non-cumulative key figure & How to make a info cube as so

Hi Experts,
How to create a non-cumulative key figure & How to make an info cube as non-cumulative cube?
Can any one kindly provide me the steps we need to performe?
Thanks in Advance,
Raj

Hi Azael,
In the How to Papers, you will find a Guide on how to take a Sanpshot view of the Stocks(How To Handle Inventory Management Scenarios in BW). Basically if you implement the Guide, you will have another cube called ICSNAP1, which will contain stock quantities /values at the end of each month. You will therefore have to take stock at the end of the last month from that cube and add up the relevant receipts and issues to arrive at the current Stock or Stock as on a particular date.
Hope this helps!
Regards
Sriram

How can I extract the data from Xstring .

Hi Gurus ,
How can I extract the data from a XSTRING .
I have to get the data which is filled in the survey form the data is getting saved in form of xstring .
Someone told me that there is a standard FM for that . but I am not able to find .
Please reply with the FM in case some one knows about it .
Thanks in advance .

The following code works as of 7.0 (in any SAP system):
FORM XSTRING_TO_STRING USING input TYPE xstring CHANGING output TYPE string.
TYPES : BEGIN OF ty_struc,
          line TYPE c LENGTH 100,
        END OF ty_struc.
DATA lt_char TYPE TABLE OF ty_struc.
DATA length TYPE i.
length = xstrlen( input ) / cl_abap_char_utilities=>charsize.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
    buffer                = input
tables
    binary_tab            = lt_char.
CONCATENATE LINES OF lt_char INTO output RESPECTING BLANKS.
output = output(length).
ENDFORM.
Edited by: Sandra Rossi on Mar 30, 2010 12:24 AM

How do you extract non consecutive pages from a pdf document. I can highlight in thumbnails but only extract consecutive.

How do you extract non consecutive pages from a pdf document?
I see its easy to do it with consecutive pages by highlighting thumbnails then 'extract' but this does not allow for non consecutive pages.
Thank you

After highlighting the pages you can drag them and drop them somewhere,
like on the desktop, and a new file will be created with just those pages.
If highlighting the pages is not feasible, or too tricky to do, then a
script can be used where you specify which pages to extract and the script
extract them to a new file.

How can i extract data from oracle table to flat file or excel spread shee

Hello,
DB Version is 10.1.0.3.0
How can i extract data from oracle table to flat file or excel spread sheet by using sub programs?
Regards,
D

Here what I did
SET NEWPAGE 0
SET SPACE 0
SET LINESIZE 80
SET PAGESIZE 0
SET ECHO OFF
SET FEEDBACK OFF
SET VERIFY OFF
SET HEADING OFF
SET MARKUP HTML OFF SPOOL OFF
Sql> SPOOL bing
select * from -------;
SPOOL OFF;
I do not see file.
I also tried
Sql> SPOOL /tmp/bing
select * from -------;
SPOOL OFF;
But still not seeing the fie,

How can I extract trading data within sales data

hi experts,
                How can I extract trading data (2LIS_46_ITM) with sales data (2lis_11_VAITM) ? I want only one data source and extract data of both data source. I have noticed that many fields are common but other fields are not common.
Message was edited by:
        rakesh jangir

Hi ganesh,
                Thanks for answer. it is correct that Generic is the final solution.
But is there any other solution if i don't want to create generic data source due to some issues.
Message was edited by:
        rakesh jangir

How can i extract data strings (temp. press. rel.hum etc) using a Virtual interface through an RS-232 connection?

How can i extract data strings (temperature, pressure, relative humidity etc) using a Virtual interface through an RS-232 connection?

Try this. It is in LV 8.5.
Note the double % in the format string. This is so the % in the input string is treated as a percent rather than a code.
You may also have to work with the line feed characters in case they are different in the string coming in compared to how the string shows up in the web browser.
Message Edited by Ravens Fan on 02-12-2008 10:19 PM
Attachments:
Example_BD.png ‏4 KB
Untitled 11.vi ‏9 KB

HOW CAN I EXTRACT THE SYSTEM DATE?

HOW CAN I EXTRACT THE SYSTEM DATE?

import java.util.*;
import java.text.SimpleDateFormat;
public class date2{
    public static void main(String[] args){
        Date today = new Date();
        SimpleDateFormat output = new SimpleDateFormat();
        String answer = output.format(today);
        System.out.println(answer);
}If you want to make it prettier, you can look at using a locale, or a pattern string in the SimpleDateFormat constructor. Read the Documentation.
Note that new Date(), constructs a Date with the current Time,
you could also use: new Date(System.currentTimeMillis());
Hope this helps
-Philip.

How can i extract just documents from time machine backup?

How can I extract just my documents from a time machine backup? I had to re-install Lion after the update screwed things up, the Genius Bar guy told me to re-install each App, and then transfer just my data (documents) back but didn't tell me how. I only see how you can restore the entire snapshot of what was on my MacBook that day, I don't see how to select specifics.

Hi,
Install a fresh Lion OS on your Mac. After this is done, then connect your time capsule. Click on the time machine icon in the dock bar so you will enter in time machine. Select the document folder and any document or all you need. The same thing you can do with iPhoto, Emails, etc.
Let me know
Claudio

How can I extract ? Please help me.........

First of all, I am very new user to XML and also Java. If my question is nonsense, forgive me, please.
I would like to test that the string in the node are equal with some string that I want to search. I use DOM API.
The following code are ok for the node is directly included text CDATA. The program gives the true value. In the following simple code, I tried to search the string "ACTI".
for example; the node, <LABEL>Problem in Activity</LABEL> , I got "true".
But I would like to match also the node ,
<SLOT label="slot" kind="a/o" role="occurs in" class_constraint="Activity" >
There is also "Activity" string value in class_constraint.
So how can I extract and match that string data?
Help me please!
case Node.CDATA_SECTION_NODE:
System.out.println(node.getNodeValue());
if (node.getNodeValue() != null) {
     String aa = (node.getNodeValue().toUpperCase());
     if ( (aa.indexOf("ACTI") >= 0))
     System.out.println("true");
     else
     System.out.println("false");
<CONCEPT>
<LABEL>Problem in Activity</LABEL>
<SLOTS>
<SLOT label="slot" kind="a/o" role="occurs in" class_constraint="Activity" >
</SLOT>
</SLOTS>
</CONCEPT>

Thank you very much for your help.
I do appreciate your reply.
As I gave my code example in my first post, I parse the XML document and I checked each node whether it is CDATA Node or Document Node, Element Node, and so on.. I used CASE statement.
If it is CDATA node, I compare Node value and the string I want to search.
At that time, I faced the problem that you solved already, I didn't know how to compare in attribute node.
With your suggestion, I can compare now.
But the problem now is that... when I extract element by tag name, it cannot test node by node.
So, how can I combine these two code?
Actually, what I am going to do is that if node is not match (in anywhere) with the string what I want to search starting from parent node to all child nodes, I want to delete that node starting from parent node and it's childs. And I want to create a new XML document by deleating unmatched nodes.
For example, in the following XML, I would like to delete the second <CONCEPT> node while I search for "Acti" string. There is no "Acti" in the second.
<CONCEPT>
<LABEL>Problem in Activity</LABEL>
<SLOTS>
<SLOT label="slot" kind="a/o" role="occurs in" class_constraint="Design" >
<SUB_L label="" def="" role_name="" class_const="Activity" />
</SLOT>
<SLOT label="slot" kind="a/o" role="occurs in" class_constraint="Const" >
<SUB_L class_const="Activity" />
</SLOT>
</SLOTS>
</CONCEPT>
<CONCEPT>
<LABEL>Problem in REQ</LABEL>
<SLOTS>
<SLOT label="slot" kind="a/o" role="occurs in" class_constraint="Req" >
<SUB_L class_const="Change" />
</SLOT>
</SLOTS>
</CONCEPT>

How can I extract maetrial condition (ME13)

Hi,
I need to extract data from transaction ME13, this transaction has any entries for validity periods of price and tax .
Anybody konws how can I extract all validity periods of this conditions?
Thanks,
Cesar G. Batista

The Master Data Attribute DataSource 0INFO_REC_ATTR may have most of what you require for Purchasing Info Record header data from R3/ECC table EINA. It definitely provides the validity period (EINA-LIFAB and EINA-LIFBI). Tax can be different for each Info Record, Plant, Purchasing Org combination (R3/ECC table EINE). In the end, you may have to create a generic DataSource for the EINE data.
Also take a look at 2LIS_02_S012 too.

How can i extract attributes from XML-file

Hi!
I want to extract XML-files.
And the most tags are no problem,but how can i extract attributes?
Here is a part from the XML-Schema:
<xs:complexType name="ATT_LIST">
          <xs:sequence>
               <xs:element name="ATTRIB" minOccurs="0" maxOccurs="unbounded">
                    <xs:complexType>
                         <xs:sequence>
                              <xs:element name="VALUE"/>
                         </xs:sequence>
                         <xs:attribute name="ATTNAM" use="required"/>
                    </xs:complexType>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
Thanks for help.
With best regards.
Nicole

Hi!
If i delete one '/' i get the error message:
data can't be found'
This is my xml-file:
<?xml version="1.0" encoding="UTF-8"?>
<INSOBJ xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sv6:8080/sys/schemas/SCOTT/sv6:8080/public/mydocs/inspection_pda_schema.xsd">
     <INSP_PDA>
          <SYSID>900000438</SYSID>
          <INSPECTOR/>
          <INSDAT>20001223</INSDAT>
          <INSOBJ_TYP>MSP-Mast</INSOBJ_TYP>
          <INSOBJ_ID1>BAM / Bad Aussee / Bad Mitterndorf/Grundlsee</INSOBJ_ID1>
          <INSOBJ_ID2>MITTERNDORF 2 - M 259</INSOBJ_ID2>
          <INSOBJ_ID3>239</INSOBJ_ID3>
          <INSOBJ_NAME>259</INSOBJ_NAME>
          <PDA_PORTION>0000000391</PDA_PORTION>
          <GESQUALITAET/>
          <AUSFALLSEINSCH/>
          <ANMERKUNGEN/>
          <LAGE_NORD>48,2281993</LAGE_NORD>
          <LAGE_OST>14,2394658</LAGE_OST>
          <HOEHE/>
          <GPS_STATUS/>
          <KOORD_SYSTEM/>
          <KOORD_EINHEIT/>
          <PLZ/>
          <ORT/>
          <STR_ORTSTEIL/>
          <NUMMER/>
          <BEZEICHNUNG/>
          <GRUNDBESITZER/>
          <TELENR/>
          <ERREICHBARKEIT/>
          <ATT_LIST>
               <ATTRIB ATTNAM="BAUWEISE">
                    <VALUE>E-Mast</VALUE>
               </ATTRIB>
               <ATTRIB ATTNAM="HOLZART">
                    <VALUE>KIEFER</VALUE>
               </ATTRIB>
          </ATT_LIST>
          <MZ_LIST>
               <MAS_ZU MZ_NAM="AUSHOLZEN">
                    <VALUE>J</VALUE>
                    <BEMERKUNG/>
                    <INSP_AM/>
                    <INSP_VON/>
                    <DONE_AM>N</DONE_AM>
                    <DONE_VOM/>
                    <URSACHE>2</URSACHE>
                    <DRINGLICH>2</DRINGLICH>
                    <ZIEL_DAT/>
                    <MZ_PARAM_LIST/>
               </MAS_ZU>
               <MAS_ZU MZ_NAM="ALLGEMEIN-ANMERKUNG">
                    <VALUE>2 Isolatoren</VALUE>
                    <BEMERKUNG/>
                    <INSP_AM/>
                    <INSP_VON/>
                    <DONE_AM/>
                    <DONE_VOM/>
                    <URSACHE>2</URSACHE>
                    <DRINGLICH/>
                    <ZIEL_DAT/>
                    <MZ_PARAM_LIST/>
               </MAS_ZU>
               <MAS_ZU MZ_NAM="Stange erdfaul/hohl">
                    <VALUE>J</VALUE>
                    <BEMERKUNG/>
                    <INSP_AM/>
                    <INSP_VON/>
                    <DONE_AM/>
                    <DONE_VOM/>
                    <URSACHE/>
                    <DRINGLICH/>
                    <ZIEL_DAT/>
                    <MZ_PARAM_LIST/>
               </MAS_ZU>
               <MAS_ZU MZ_NAM="Masttyp nicht normgerecht">
                    <VALUE>J</VALUE>
                    <BEMERKUNG/>
                    <INSP_AM/>
                    <INSP_VON/>
                    <DONE_AM/>
                    <DONE_VOM/>
                    <URSACHE/>
                    <DRINGLICH/>
                    <ZIEL_DAT/>
                    <MZ_PARAM_LIST/>
               </MAS_ZU>
          </MZ_LIST>
     </INSP_PDA>
     <INSP_PDA>
          <SYSID>900000437</SYSID>
          <INSPECTOR/>
          <INSDAT>20001223</INSDAT>
          <INSOBJ_TYP>MSP-Mast</INSOBJ_TYP>
          <INSOBJ_ID1>BAM / Bad Aussee / Bad Mitterndorf/Grundlsee</INSOBJ_ID1>
          <INSOBJ_ID2>MITTERNDORF 2 - M 259</INSOBJ_ID2>
          <INSOBJ_ID3>239</INSOBJ_ID3>
          <INSOBJ_NAME>259</INSOBJ_NAME>
          <PDA_PORTION>0000000391</PDA_PORTION>
          <GESQUALITAET/>
          <AUSFALLSEINSCH/>
          <ANMERKUNGEN/>
          <LAGE_NORD>48,2281993</LAGE_NORD>
          <LAGE_OST>14,2394658</LAGE_OST>
          <HOEHE/>
          <GPS_STATUS/>
          <KOORD_SYSTEM/>
          <KOORD_EINHEIT/>
          <PLZ/>
          <ORT/>
          <STR_ORTSTEIL/>
          <NUMMER/>
          <BEZEICHNUNG/>
          <GRUNDBESITZER/>
          <TELENR/>
          <ERREICHBARKEIT/>
          <ATT_LIST>
               <ATTRIB ATTNAM="BAUWEISE">
                    <VALUE>E-Mast</VALUE>
               </ATTRIB>
               <ATTRIB ATTNAM="HOLZART">
                    <VALUE>KIEFER</VALUE>
               </ATTRIB>
          </ATT_LIST>
          <MZ_LIST>
               <MAS_ZU MZ_NAM="AUSHOLZEN">
                    <VALUE>J</VALUE>
                    <BEMERKUNG/>
                    <INSP_AM/>
                    <INSP_VON/>
                    <DONE_AM>N</DONE_AM>
                    <DONE_VOM/>
                    <URSACHE>2</URSACHE>
                    <DRINGLICH>2</DRINGLICH>
                    <ZIEL_DAT/>
                    <MZ_PARAM_LIST/>
               </MAS_ZU>
               <MAS_ZU MZ_NAM="ALLGEMEIN-ANMERKUNG">
                    <VALUE>2 Isolatoren</VALUE>
                    <BEMERKUNG/>
                    <INSP_AM/>
                    <INSP_VON/>
                    <DONE_AM/>
                    <DONE_VOM/>
                    <URSACHE>2</URSACHE>
                    <DRINGLICH/>
                    <ZIEL_DAT/>
                    <MZ_PARAM_LIST/>
               </MAS_ZU>
               <MAS_ZU MZ_NAM="Stange erdfaul/hohl">
                    <VALUE>J</VALUE>
                    <BEMERKUNG/>
                    <INSP_AM/>
                    <INSP_VON/>
                    <DONE_AM/>
                    <DONE_VOM/>
                    <URSACHE/>
                    <DRINGLICH/>
                    <ZIEL_DAT/>
                    <MZ_PARAM_LIST/>
               </MAS_ZU>
               <MAS_ZU MZ_NAM="Masttyp nicht normgerecht">
                    <VALUE>J</VALUE>
                    <BEMERKUNG/>
                    <INSP_AM/>
                    <INSP_VON/>
                    <DONE_AM/>
                    <DONE_VOM/>
                    <URSACHE/>
                    <DRINGLICH/>
                    <ZIEL_DAT/>
                    <MZ_PARAM_LIST/>
               </MAS_ZU>
          </MZ_LIST>
     </INSP_PDA>
</INSOBJ>
Thanks for help.
With best regards
Nicole

How can i extract using while the time from the string ?

First time how can i extract the time as string ?
And second how can i extract the time as DateTime.Now ?
public static void ExtractDateTime()
htmltoextract = new Uri("http://test.com");
client = new WebClient();
f = client.DownloadString(htmltoextract);
client.Dispose();
int index = 0;
while (index != -1)
int t = f.IndexOf(firstTag);
int g = f.IndexOf(lastTag);
a = f.Substring(t + firstTag.Length, g - t - 8);
The string look like this: thisisateststring201309202145andthenextimeinthestringis201309202130andthelastofthisexampletimeinthisstringis201309202115
What i need to do is first time to extract the time as string to a List<string> like this:
index 0 201309202145
index 1 201309202130
index 2 201309202115
The second time to extract the times as this time format: YYYYMMDDhhmm and also to add the times to a List.
First time and second time i mean first example and second example. To use my code but first time to extract it as strings second example as the format of YYYYMMDDhhmm
And i need to use the while and indexof and substring in this cases.

Is the region always going to be "eu" or are you going to have more than one region. Since you are reading a string DateTime from different timezone than the computer you are reading the data you have to convert to a different timezone.
It looks like you have at least 'is' and 'eu' for regions. I don't know what offsets you need so try something like this.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Text.RegularExpressions;
using System.Globalization;
using System.IO;
namespace ConsoleApplication1
class Program
static void Main(string[] args)
string input = File.ReadAllText(@"c:\temp\test.txt");
string pattern1 = @"imageUrls = \[[^\]]*\]";
Regex ex1 = new Regex(pattern1, RegexOptions.Singleline);
string pattern2 = @"region=(?'region'[^&]*)&time=(?'time'\d{12})";
Match match1 = ex1.Match(input);
Regex ex2 = new Regex(pattern2, RegexOptions.Singleline);
MatchCollection matches2 = ex2.Matches(match1.Value);
IFormatProvider provider = CultureInfo.InvariantCulture;
List<DateTime> dateTime = new List<DateTime>();
foreach (Match match2 in matches2)
string region = match2.Groups["region"].Value;
DateTime dt = DateTime.ParseExact(match2.Groups["time"].Value, "yyyyMMddHHmm", provider);
switch (region)
case "eu" :
dt.AddHours(1);
break;
case "is":
dt.AddHours(-1);
break;
dateTime.Add(dt);

How can I pass a Presentation Variable (Date) into a prompt

Hello
How can I pass a Presentation Variable (date) into a prompt? I seem to be able to do this successfully for a non-date value but have had no luck with a Date variable.
Here's a simplistic version of what I'm trying to do:
1. I have a Presentation Variable called startDate which is a Date that defaults to this SQL - SELECT "Reporting Dates"."Measure Date" FROM Trading WHERE "Reporting Dates"."Date Name" = 'Current'.
2. I now want to pass this variable into a prompt with SQL like this: SELECT "Position Date"."Position Date" FROM Trading where "Position Date"."Position Date" = date'@{startDate}{2009-04-24}'
I get this error: Datetime value @{startDate}{2009-04-24} from @{startDate}{2009-04-24} does not match the specified format.
Now I can use the exact same syntax in a filter. For example, a simple Answers request where I pick Position Date with a filter saying "Position Date"."Position Date" = date'@{startDate}{2009-04-24}' works fine.
What am I doing wrong?
Thanks!

Can you provide more information please?
1. What is the format of the first date prompt, is it YYYY-MM-DD or?
2. Which data type is Position Date."Position Date" in the physical layer, date or date time?
3. What is the column formula in the first prompt?
4. The first prompt is set to drop-down or?
5. If you are using this SQL Results in the second prompt:
SELECT "Position Date"."Position Date" FROM Trading where "Position Date"."Position Date" = date '@{startDate}{2009-04-24}'
then @{startDate} must be in YYYY-MM-DD format to work properly, otherwise (for example):
datetime value 01/01/2000 from 01/01/2000 does not match the specified format.
This doesn't work for example:
SELECT Times.time_id FROM "Normal model" where Times.time_id =date '01/01/2000'
Regards
Goran
http://108obiee.blogspot.com

How can I extract non-cumulative cube data to another cubes ?

Similar Messages

Maybe you are looking for