How can I find a turning point or inflection point on the curve?

I have encountered a problem, is seeking a turning point or inflection point on the curve.
The curve is monotonically increasing (slope is essentially the same); the slope tends to 0 after the turning point. Because of the curve is not actually a straight line, so the derivative of point by point seems comparison difficult.
First, I intercepted two new curves from the curve. One with monotonically increasing slope and another with remained constant slope. And I transform the two new curves to two absolutely straight with “regression” filter. Then find the intersection point of two absolutely straight. Through the X coordinate of the intersection point to find the corresponding Y value on the curve.Turning point is (x, y).
However, this method can only be used for a fixed curve. Because the range of the intercept values need to give the range, if the new changes in the overall length of the curve, the value of this range may no longer apply.
My question is: Is there a better way, or Diadem functions associated itself can solve this problem?
Any of your ideas and suggestions is important to me, thanks very much.
Best Regards
Jie
Solved!
Go to Solution.
Attachments:
inflection point.JPG ‏131 KB

Hi J. Huang,
I would recommend the following generic approach, based on the pictures you submitted:
1) Create a smoothed channel from the raw data curve to remove random variations
2) Calculate a derivative/slope channel from the smoothed channel
3) Use the ChnFind() function to find the points where...
       the slope is close to zero
        the slope is positive
        the raw data is positive
        the raw data is close to the maximum channel value
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

Cs6 , how can i add a anchor point in the curve in the channel Red or Green?

Hi
how can i add an anchor point in the curve in the Channel R / G and B?
in cs5 , with ctrl + click i was able to click on the image and add an anchor point in the curve channel RGB
and with shift +ctrl + click i was able to click on the image and add an anchor poing in the channel Red , 1 in the channel Green and 1 in the channel blue
i know cs6 doesn't have any more ctrl+mouse click , there is the targeted adjustamanent tool
i can do it with ctrl+m and call the curve
but i can't do it with curve adjustament tool
is there a way to add a anchor point in each channel red , green and blue (like the prev photoshop)?
thanks

thanks that's correct! thanks
but it's not 100% correct
to add a multiple points in rgb shift+click doesn't work!
from adobe
Keyboard shortcuts: Curves
You can use these keyboard shortcuts for Curves:
To set a point on the curve for the selected color in each color component channel (but not in the composite channel), Shift+Ctrl-click (Windows) or Shift+Command-click (Mac OS) in the image.
To select multiple points, Shift-click points on the curve. Selected points are filled with black.
To deselect all points on the curve, click in the grid, or press Ctrl‑D (Windows) or Command-D (Mac OS).
To select the next higher point on the curve, press the plus key; to select the next lowest, press the minus key.
To move selected points on the curve, press the arrow keys.
(Curves dialog box) To set a point on the curve for the current channel, Ctrl-click (Windows) or Command-click (Mac OS) in the image.
If you’re instead using the Curves adjustment, simply click in the image with the On-image adjustment tool .

How can you find out if your mac is infected with the flash back virus

how can you find out if your mac is infected with the flash back virus?

F-Secure's Flashback removal tool - http://www.f-secure.com/v-descs/trojan-downloader_osx_flashback_k.shtml - supposedly also works on OSX 10.5 and earlier.
05 Apr 2012 How to Detect and Protect Against Updated Flashback Malware - http://tidbits.com/article/12918 - detection methods for multiple browsers and general information
Leopard and earlier users see recommendations at: https://discussions.apple.com/thread/3872491

How can I find out who created or which id created the Essbase app. Is there any file where can i go and check to see?

Hi All,
Do you guys know how can I find out who created or which id created the Essbase app. Is there any file where can i go and check to see?
I am on UNIX and 11.1.2.2
Thanks all.

Don't think that information is kept anywhere.
This is how the log will look like during app and db creation
[Fri Aug 02 13:35:55 2013]Local/ESSBASE0///9036/Info(1051001)
Received client request: Get Extended Application Info (from user [celvin@Native Directory])
[Fri Aug 02 13:36:04 2013]Local/ESSBASE0///8072/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:36:04 2013]Local/ESSBASE0///8072/Info(1051001)
Received client request: MaxL: Execute (from user [celvin@Native Directory])
[Fri Aug 02 13:36:06 2013]Local/ESSBASE0///5432/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1051061)
Application test loaded - connection established
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1054027)
Application [test] started with process id [4324]
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1056010)
Application test created
[Fri Aug 02 13:37:22 2013]Local/ESSBASE0///6972/Info(1051001)
Received client request: MaxL: Define (from user [celvin@Native Directory])
[Fri Aug 02 13:37:22 2013]Local/ESSBASE0///6972/Info(1051001)
Received client request: MaxL: Fetch (from user [celvin@Native Directory])
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1051001)
Received client request: MaxL: Execute (from user [celvin@Native Directory])
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1054014)
Database test loaded
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1056020)
Database test.test created
Regards
Celvin
http://www.orahyplabs.com

HT5035 I found 2 cards while cleaning my daughters room... How can I find out if there is a balance on the cards still?

I found 2 cards while cleaning my dtrs bedroom, how can I find out if there is a balance on them still?

Has the strip been removed on the back of the card revealing its number :
If it hasn't then you can be pretty sure that they haven't been redeemed. Otherwise the only way to know for sure is by trying to redeem them

How can i find out serial no of torch 9800 without the phone.

How do I find out serial no of my torch 9800 without the physical phone ( is it in the packaging to the brand new phone?) so that I can report it being stolen and alert anyone buying a stolen hanset in 2nd hand Market. Who should I report it having been stolen after repotted it having been stolen to the police.

Your cell carrier would have a record of it. They might even blacklist the phone so nobody else can use it.
Give them a call to see what they will do for you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

How can I find a previous device that was registered with the same id but on a different laptop?

my laptop was stolen along with my ipod touch. It was registered with that laptop but I need proof for an insurance claim. how can i show i registered it (owned it) with my new laptop?
my ipod was previous to the most recent so i think thats a 4th gen
i've used the same apple id on both laptops
thanks

ok well my last laptop was the only lapyop used to sync my ipod (thought that meant it was registered)
i need proof of purchase for an insurance claim. i dont have the box because i threw it away when i got the ipod. is there any way of showing, on my new laptop, that i had my last ipod so that i can get a replacement.
cheers

How can I find my account name for signing in to the sync option

I have a sync now button, but, no set up sync key, so I can't get the digits to sync to my new laptop. When I attempt on my new laptop and press the I don't have the other device key, it asks for information including my Account. I don't know where to find that name. I have the password and recovery key; just need to find the name of the Account.

You can only use pair a device if you have already setup Sync on another device because that is how pairing works: both devices need to be online and one device needs to be connected to the Sync server.<br />
The device that you want to add gives a 3x4 character pairing code that you need to enter on the device that has already Sync set up and that is currently connected to the Sync server (so you need to have both devices at hand).<br />
Then the Sync server uses this pairing code to connect to the second device and passes the name and password and Sync key from the first device that has Sync set up to that second device that you want to add.
Enter all details like the account name (email address) and password and the 26-character Sync key manually to connect to an existing sync account instead of using the 12-character code to pair a device if pairing isn't possible.
# open "Firefox > Set Up Sync..." or "Tools > Options > Sync > Set Up Firefox Sync"
# click "I Have an Account"
That brings you to the "Pair a Device" window that shows a 12-character code that you can enter on another device that has Sync set up.
If that isn't possible then click "I don't have the device with me" at the bottom to enter the account settings (email, password, sync key) manually.

How can you find your iphone if you are not in the cloud?

I cannot find my iphone --- any suggestion on how to do it as I am not in the cloud

What to do if your iOS device is lost or stolen
Reporting a lost or stolen Apple product

MOVED: how can i find out if my video card has reached the repair centre

This topic has been moved to Anything Under The Sun.
https://forum-en.msi.com/index.php?topic=183793.0

Hello,
You can try this here : https://forum-en.msi.com/index.php?topic=168249.0
If you don't have RMA Number, then no other way to check status. Unless you contact MSI.
>>How to contact MSI.<<

HT1977 How can I find and download previous purchases from on/about the year 2005? Thank you

When I open iTunes, I can not view / do not have access to the numerous purchases of television shows (some of which have been discontinued) or my music and music videos. This is extremely frustrating because I paid for those movies, music, and music videos. Any assistance as to how to access these purchases will be greatly appreciated. Thank you
Sincerely,
Sarah E. Haston

Was the content in question acquired with a different Apple ID? If so, you must be signed in with the Apple ID the content was acquired with.

HT1848 HOW CAN I FIND MY SONGS ON MY COMPUTER AND TRANSFER THE SONGS THAT I DIDNT BUY FROM ITUNES TO MY SAMSUNG S4???????

How? I don't understand why I am having so much difficulty not only trying to find the songs that I purchased through itunes but the music I already had that is only stored on my iphone at the moment. I had to re-install my computer so I lost everything that was on it. WHY??? Is this so difficult to figure out??? My iphone plays the songs, I want them on my samsung s4. How do i do it?
Thanks in advance.

If you put them on your computer, then they will be in your "Library" in itunes.
You sync them to your iphone as you did before.
Open itunes, plug in iphone, select what you want to sync and sync.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

How can i find different piano options, pianos that fill up the screen not just a small piano?

So when i first bought my mac i messed around with garageband and i pulled up all of these painos and synthisizers and the piano would cover about half of the screen. Well now i'm in college and i need to know pitches for my music courses and thought this would help me but i cant find the "big" pianos anymore just the small one for recording. please help me

The "big" piano is called "Musical Typing": You launch from the "Windows" menu:
Windows > Musical Typing ⇧⌘ K
Regards
Léonie

How can I find out what is in each portion of the capacity bar?

Does anyone know?

You can not access the backup directly.
Did you restore your replacement from this backup?
If so then you already have everything in the backup on your device.
If not, you can wipe the device and restore from this backup:
Settings > General > Reset > Erase All Content & Settings
What is it you are worried about losing that isn't already on your current device?

HT4759 hi, how can I find my lost Mac BookAir, I left on the airlplane flight to Santiago !

hi all apple users
I bought an Mac Bookair 13.3" in Bangkok
left under it in the airplane...went to lost and found in Santiago de Chile
nothing appeared
I have the original receipt
maybe the serial number and a code is on the receipt
pleaes help
thanks to all
Guenther

Did you enable Find My Mac on the MBA? Then search for it on your iCloud page https://www.icloud.com . Also contact the Airline - they will have form to fill in.
See: What To Do If Your iDevice Is Lost or Stolen: Apple Support Communities

How can I find a turning point or inflection point on the curve?

Similar Messages

Maybe you are looking for