How can I find outliers in a DIAdem report using LabVIEW

I am new to DIAdem and I am trying to take a DIAdem report and find the outliers and mark them with an 'X'. I found an example of this but it uses a VB script. The example has a constant to determine what is an outlier. I need this to be a variable. Thanks for the help in advance.
AJL

Hello AJL,
an easy way to realize your task would be to use the VBS script you allready found.
You can call a VBS with the "Diadem run script.vi". Inside the VBS, just locate the parameter you want to change and replace it with one of the DIadem Variables (for a realvalue you could use R1 for instance). You do not need to declare those internal variables initially, they are part of DIAdem and free for everybody to use. Just make sure it is not used a second time in the script you are calling. Then, prior to running the script you just have to set the respecting variable with the "DIAdem variable set.vi". This allows you to change DIAdem command parameters from your LabVIEW vi.
Both VIs I mentioned above are part of the LabVIEW DIAdem Toolkit. In case you don't have it yet, you can download the functions at
http://digital.ni.com/softlib.nsf/websearch/5121C7​F322C9392886256EDF005BB4FF?opendocument&node=13207​0_US
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany

Similar Messages

  • How can I find the location of the signature used in the Adobe Reader signature feature?

    How can I find the location of the signature used in the Adobe Reader signature feature? I've been using the signature feature for a while now and it works great and I'd like to use it on another computer. However, I forgot where I stored the signature. Adobe finds it with no problems (the signature pops up when I click "Place Signature"), but I have no idea where it is.

    Hello,
    It's here - C:\Documents and Settings\username\Application Data\Adobe\Acrobat\10.0\Security\
    For more information, please refer - Cannot create a digital ID/signature
    ~Deepak

  • HT4211 how can you find out what kb are being used by what apps

    how can you find out what kb are being used by what apps there is always alot of kb being used even when I don't use my phone

    Go into settings , general, usage and it tells you what the apps use. If your refering to the memory storage of the apps.

  • TS2755 How can I find out what devises have been used to log into using my Apple ID?

    How can I find out what devises have been used to log into my Apple ID?

    You can't. If you think someone has change your password. If someone complains you will know who it is.

  • How can we find out the disk which is used for a mount point

    How can we find out the disk which is used for a mount point?
    one of our mount point(/u03/oracle/prod) was using high I/O and this was causing slowness in the server.
    I can see a disk operation error in errpt at the same time as below. Wanted to check whether the mount point /u03/oracle/prod is using the disk hdisk31
    $errpt|more
    IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
    DXB78877 1125032114 T H hdisk31 DISK OPERATION ERROR
    OS version:AIX 6.1
    DB:11.2.0.2

    this is the output for cat /etc/filesystem
    /u02:
            dev             = /dev/fslv00
            vfs             = jfs2
            log             = /dev/loglv00
            mount           = true
            options         = rw
            account         = false
    /u01:
            dev             = /dev/fslv01
            vfs             = jfs2
            log             = /dev/loglv00
            mount           = true
            options         = rw
            account         = false

  • How can I do to communicate to parallel port using labview 5.0 and NT ?

    I am trying to write and read from parallel port using Labview 5.0. It does not work with NT.
    How can I do to communicate to parallel port using labview 5.0 and NT ?
    Thank you in advance.
    Regards,

    If you are trying to use In/Out port functions that come with LabVIEW they will not work with NT. I think the AccessHW file at the following link will fix that problem:
    http://zone.ni.com/devzone/explprog.nsf/6c163603265406328625682a006ed37d/49664743ded6f1da862564bc004e3a7f?OpenDocument
    Try also this link:
    http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/0989d3d9dafae64e8625680400679736?OpenDocument
    and do some searchs at NI.com for parallel port, you should find some more usefull info.
    Good luck
    Brian

  • How can I find my custom panel in CS5 using java script

    -I made an empty panel using Adobe Configurator 2 and then exported it to /Panels folder.
    -My custom panel is now in photoshop and works.
    -I added a simple code to onPanelInit():
    function onPanelInit()
        var myWindow = new Window ("dialog");
        var myMessage = myWindow.add ("statictext");
        myMessage.text = "Hello, world!";
        myWindow.show ( );
    so far so good.
    Now instead of creating a new window like I did above, I want to use the new custom panel and add a text to it.
    The problem is, how do I do that in java? Where can I find the panel that I should assign the text to?
    I know that you can add the text in Configurator, or you can edit the .xml file and add the button there, but my
    plan is to create a panel where i can add and remove buttons dynamically and that's why I have to do that in java.
    Any help would be appreciated!
    Cheers,
    Petri J

    Use Runtime.exec() to run a OS specific command which retrieves OS specific info.
    Or use JNI to access a OS specific API which returns the info you want.

  • How can I show groupped columns inisde Diadem report ?

    Hi,
    I am trying to show some values inside a Diadem report. I must show then in a similar way as "groupped columns" inside Excel, comparing different values in columns, just one columns next to the other one, but I do not know how I can manage it inside Diadem. With "bar" and outlined bars, all the columns are located at the same X point, so it is not the same as in Excel. How could I compare values of differet columns?
    Thanks for your collaboration

    Hi koniker,
    Do you mean Y offset? If so, you can do it, but it's not a built-in feature, so again, you would have to shift the Y values up or down by Delta with the FormulaCalculator prior to graphing.
    Normally multiple values occurring at the same X axis point are displayed either as lines and/or symbols. Bar graphs come up occasionally in DIAdem, but they're much more important for business graphing needs, thus the strong support of them in Excel.
    What's your use-case? Are bar graphs the only acceptable choice? I can create and send you VBScript code to shift the bars either in the X direction or the Y direction, as you wish, if that's the optimal diplay. It just won't be a built-in feature.
    Regards,
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • How can I find where a specific font is used in a Pages document

    I have a Pages document that always shows a font missing error when opened. Is there any way to find where that font is supposedly used? Alternatively, if I install the font, the message doesn't appear — I assume that means that the font was found. Is there a way to find where that font is used in the document?

    Hi Bob.
    For the present, at least, it's going to involve a visual inspection.
    When you open the document, you can select a specific font in the Document Warning window, and replace it with another, using the Replace Font pop-up at the bottom of the window.
    Choose a font that will be easy to spot, such as Wingdings, used below to replace Cambria:
    At this point, you could replace the occurrences individually with a suitable font, or press command-Z to undo the replacement, or discard the Pages version of the document and open the original a second time to produce a new Pages document.
    For the future, you use Provide Pages Feedback. in the Application menu (in Pages, the "Pages" menu) to send a feature request to Apple. The link will also take you to the Feedback page.
    Regards,
    Barry

  • How can I find a set of sample reports which we can create using vCloud Usage Meter?

    Additionally,
    Is there a way that we can assign $ values to vCPU and vMem per GHz and GB?
    Can we report usage per min?
    Many Thanks in advance.

    How can I get the later version on my local? 
    You can get the "SQL Server Native Client" always from the related Feature Pack, e.g.
    Microsoft SQL Server 2008 Service Pack 3 Feature Pack => sqlncli.msi
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • How can I find out where certain prompts are used in a BI application?

    I have 2 questions...
    How do I identify all the dashboards where a specific object from my catalog is used in a BI application?
    Similiarly, how can I determine all the reports and prompts that use a specific field from my subject area?
    Thanks,
    Darcy

    Open catalog manager and create a report. That report can include column formula(field), table, catalog name and etc and will create a report that you can download to an excel dump giving all the reports and report paths that use those selected attributes.
    Open catalog manager--> go to tools--> create report and select all you need
    Hope it helps
    thanks
    prash

  • HT1311 How can I find out, what Apple ID was used for an App I recently purchased?

    I have several Apple IDs and used one of these to purchase Apple Pages. Now I'd like to use the same Apple ID to complete another purchase but just can't figure out what Apple ID I used last time...

    The apps in the Apps section of your computer's iTunes library will show all of the apps that you downloaded on it and/or copied form your devices. But if I select one of the apps in the Apps section (in my library in iTunes, not Finder) in there and do get-info, then on the bottom half of the Summary tab on the popup that you I get I see :
    With the 'Apple ID' field showing the account id that I downloaded it with

  • Delegate control, how can I find out which one is being used?

    I am working with some mysites customizations and came across a delegate control. How can I tell which control SharePoint is currently pointing this delegate control to?  If someone already swapped it out, how would I know?
    <SharePoint:DelegateControl runat="server" ControlId="ColleaguesLink1" Scope="Farm" />
    What does ColleaguesLink1 currently point to?  What did it originally point to?

    This blog post may get you started (same applies to SharePoint 2010):
    http://usingsystem.wordpress.com/2008/04/11/sharepoint-delegatecontrol/
    I hope this helps,
    Regards,
    Yuri Lausberg, MCP, MCAD, MCSD, MCTS, MCPD

  • How can I view/debug via probes with TestStand using Labview Vi's?

    Hello, I would like to debug a Test Stand Sequence that uses Labview Vi's. Anybody know how?

    Hi,
    You cant use the vi probes in TestStand. But you can set breakpoints in TestStand and then step in the labview VI's.
    TestStand 3.x has improved debugging capabilities over TS2.0.1.
    You can also set you break points in your Labview VI's and when your test code is executed the VI will stop when your break point is reached. Then you can use your probes as you would normally do in your labview.
    In TestSTand you also have the ability to set up watches on your teststand variables and to beable to modifiy these as well.
    I think the TestStand User Manual will help explain in more detail.
    Hope this helps
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • How can i find the max of a column using CMP

    I urgently need a solution to How one can find the maximum of a field which is of integer/numeric type??
    I am doing it in CMP + weblogic.
    Suppose the table is STUDENTMARKS which consists of a field
    TotalMarks of Integer type..
    and i need to find the student with maximum marks..
    Should i be using EJB QL.. If so pls tell how...

    U can use aggregate function max in ejb ql

Maybe you are looking for