How can I show groupped columns inisde Diadem report ?

Hi,
I am trying to show some values inside a Diadem report. I must show then in a similar way as "groupped columns" inside Excel, comparing different values in columns, just one columns next to the other one, but I do not know how I can manage it inside Diadem. With "bar" and outlined bars, all the columns are located at the same X point, so it is not the same as in Excel. How could I compare values of differet columns?
Thanks for your collaboration

Hi koniker,
Do you mean Y offset? If so, you can do it, but it's not a built-in feature, so again, you would have to shift the Y values up or down by Delta with the FormulaCalculator prior to graphing.
Normally multiple values occurring at the same X axis point are displayed either as lines and/or symbols. Bar graphs come up occasionally in DIAdem, but they're much more important for business graphing needs, thus the strong support of them in Excel.
What's your use-case? Are bar graphs the only acceptable choice? I can create and send you VBScript code to shift the bars either in the X direction or the Y direction, as you wish, if that's the optimal diplay. It just won't be a built-in feature.
Regards,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

How can I delete/add Columns in my Report?

Hi everybody,
i´ve just a silly little question...
We´re using APEX to revise our Daily Reject-Rows and some other Dimensiontables.
For every Table, witch is to revise we´ve got a single Page in our APEX Application.
Also, in every Page we created a Report for our users,
so that they can revise the Data,
and published it in our intranet, using a Webserver.
Now my Question...
In one of these Pages we´ve more then 110 columns in the sql Region Source,
placed in the Region Definition.
But...in the Report Attributes, there are only shown 99 Columns.
I must integrate 3 or 4 more Columns from my Source Definitioned Table in the Report.
Where can i do this?
I only see how i can edit the columns, make them visible or hide them,
define their Propertys...but where can i add a new Column?
or delete one?
I´m very thankfull for every Awnswer :-)
Best Regards
LoneWolf

Ok, i found a Solution...
It seems to be a BUG. (?)
The Report Attributes will be realy generated automaticly
under using the Source Definition, but...
- There´s a Restriction in the Sum of all Columns,
it can be only 99 witch will be able to define and revise.
- If you´ver got more then 99 Columns in your Source
you have to specified them exactly, by Name
...AND...
- you have to create the Source SQL new.
It is not sufficiently if you change the Position of the Columns in the SQL Source (placed at the Region Definition).
I copied and pasted the Source SQL three Times,
before APEX accept the changes of the Position from the Columns.
At least...
In the Moment as i define the needed Column,
(now in the Report Attribute available),
APEX understands it an i can put the others Columns (Columns 99 till 110) back in the Source SQL, without loosing my needed Column in my Report again.

How can I find outliers in a DIAdem report using LabVIEW

I am new to DIAdem and I am trying to take a DIAdem report and find the outliers and mark them with an 'X'. I found an example of this but it uses a VB script. The example has a constant to determine what is an outlier. I need this to be a variable. Thanks for the help in advance.
AJL

Hello AJL,
an easy way to realize your task would be to use the VBS script you allready found.
You can call a VBS with the "Diadem run script.vi". Inside the VBS, just locate the parameter you want to change and replace it with one of the DIadem Variables (for a realvalue you could use R1 for instance). You do not need to declare those internal variables initially, they are part of DIAdem and free for everybody to use. Just make sure it is not used a second time in the script you are calling. Then, prior to running the script you just have to set the respecting variable with the "DIAdem variable set.vi". This allows you to change DIAdem command parameters from your LabVIEW vi.
Both VIs I mentioned above are part of the LabVIEW DIAdem Toolkit. In case you don't have it yet, you can download the functions at
http://digital.ni.com/softlib.nsf/websearch/5121C7F322C9392886256EDF005BB4FF?opendocument&node=132070_US
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany

How can we show data in rows when it is in Columns........

I have strucked with a simple but a complex problem.
I have a Report with data in vertical rows..need of the hour is how can we show that data into column structure.
here is the table sample which i have in Database..
Location      chrg_type    Effective_date
xxxxxxx        xxxx          xx-xx
thhis is the structure in effective date we have several months in it in a single column i want show the effective date or effective month in various columns instead of a single column.
my required table is....
                            Effective_date     Effective_date
Location      chrg_type     xx-xx              xx-xx
xxxxxxx        xxxx          xx-xx
any tough heads?????

Hi Sunil,
Your 1st problem is that you are going to need one more field to accomplish you goal. What type of data do want under your new date columns?
Anyway, once you have that you need to move on to how to move the data out into columns based on date.
Try something like this.
0_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',CurrentDate) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',CurrentDate)
THEN {tbl.DataField}
1_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -1, CurrentDate)) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -1, CurrentDate))
THEN {tbl.DataField}
2_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -2, CurrentDate)) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -2, CurrentDate))
THEN {tbl.DataField}
... Repeat this process until you have all of the columns you need, following this format.
Hope this works for you,
Jason

Using Mountain Lion (OS 10.8), in Contacts, how can I show a count of number of contacts total and/or number of contacts in a group?

Using Mountain Lion (OS 10.8), in Contacts, how can I show a count of number of contacts total and/or number of contacts in a group?

If you scroll the list to the bottom, there might be a count. I haven't figured out why you sometimes get a count and other times you don't.

How can i select other column values('-' separated) in group by function

CREATE TABLE EMP (
     EMPNO NUMBER(4) NOT NULL,
     ENAME VARCHAR2(10),
     JOB VARCHAR2(9),
     SAL NUMBER(7)
INSERT INTO EMP(EMPNO, ENAME, JOB, SAL) VALUES (7369, 'SMITH', 'CLERK', 800);
INSERT INTO EMP(EMPNO, ENAME, JOB, SAL) VALUES (7499, 'SMITH', 'SALESMAN', 1600);
INSERT INTO EMP(EMPNO, ENAME, JOB, SAL) VALUES (7521, 'ALLEN', 'SALESMAN', 2400);
In Output I want 3 columns : EMP,SUM(SAL),JOB(hyphenSeparated)
Means i want my output like
First row : SMITH,2400,CLERK-SALESMAN
Second row : ALLEN,2400,SALESMAN
I tried to write following sql : select ename,sum(sal) from emp group by ename
But i want other colummn value in '-' separated. but group by is only allowing agreegated function.
How can i select other column value using group by function.

SQL> select ename,sum(sal), listagg(job, '-') within group (order by job) as job from emp group by ename;
ENAME        SUM(SAL) JOB
ALLEN            2400 SALESMAN
SMITH            2400 CLERK-SALESMANnote: LISTAGG is a feature of 11.2

How can I make a column of sums out of a repeating pattern of 24 changing numbers

How can I make a column of sums out of a repeating pattern of 24 changing numbers in Numbers.
I have a long list of 8760 numbers of which I need to take the sum (and store in a column) of each 24 numbers.

Here's one way. I've reduced the example, taking groups of five numbers from a set of 20. I've used 3 as the data number in all cases to make the sum easily recognizable.
Original column of numbers in Data::column A.
Data::B2 (and filled down): =QUOTIENT(ROW()+3,5)
This adds 3 to the row number, then divides by 5, returning the quotient and ignoring the remainder.
The result is a 'group number' for each group of five rows.
Sums of each group are reported in the Sums table.
Sums::A2 (and filled down): =ROW()-1
Sums::B2 (anf filled down): =SUMIF(Data::$B,A2,Data::$A)
For your example, assuming the 8760 numbers are listed in column A of a table named Data, starting at cell A2:
Add a second column to the table (column B).
In B2 enter the QUOTIENT formula above, with these two revisions:
=QUOTIENT(ROW()+22,24)
Fill down to all cells in the column.
Provided you have named the first table "Data", both formulas in the Sums table will be as written above. You will need to extend the Sums table to 366 rows (including the Header row) to accommodate all 365 groups of 24.
Regards,
Barry
PS: For details on the functions used, see the iWork Formulas and Functions User Guide. You can download the guide via the Help menu in Numbers '09.

How can I add a column in a finder window

How can I add a column in a finder window? I'm working with music files (mp3 and other formats) and would like to sort by artist, album, etc but this columns will not show up in Finder. The info is there but I just can't get it in a column I can use to sort the list of music files. Please help.

Are you using a folder system to organize your music?

How to Hide/show the columns data while doing Drill down or drill up

Hi ,
How to Hide/show the columns data while doing Drill down or drill up in webi report .
Does it possible BO 3.1 version ?
Please suggest me on this.
Thanks & Regards
Venkat

While that is not there yet, you can make use of the show when empty yes/no in combination with alerters.
So I have an alerter applied to every cell of the table.
When a condition is true (say I drilled down) I just put = "" in every cell, emptying the table,
because its now empty and doesn't need to show, it wont.
For the detail table I use the opposite, so when you drilled down it becomes visible...
Hope this helps all that do not have 40 yet
Good luck,
Marianne

How can I show Totals in at the footer?

Hi,
I want to create a List (Report) with a Number column say (Amount), and there are certain number of transactions on the page. How can I show Total Amount at the bottom of report?
Thnx in advance.

BalusC, thnx for ur help. This means there is no other way that v we can add some number columns using jsp. In anyways we will have to populate totals using backing beans.
Thank u very much :)

How can I creat 4 columns?

How can I creat 4 columns? I want a check box, text field for details, and a second column of each.

You can create fields side by side by clicking the "+" sign on the right edge of a field (when it is selected), you can certainly add the fields you describe all in a row. FormsCentral doesn't have the concept of columns, but you can lay it out so you have those fields in a column type layout.
You might want to adjust the label position for the fields to get the layout you desire, you can define the label position per field in the Properties panel for the field.
Note that you can also drag/drop fields into position. Click/drag on the far left edge of a field to drag, a blue insertion marker will show you where it will be dropped when you let go.
Thanks,
Josh

How can i make hidden column in JTable

hi, how can i make hidden column in JTable,
basically i have a ID field in JTable, i have to use this ID , but i also dont want to show this ID in JTable.
any idea how ??

staiji its not working
i did this :
first :
TableColumnModel columnModel =
usersTable.getColumnModel();TableColumn column =
columnModel.getColumn(1);
usersTable.removeColumn(column);
then when i trying to get this :
Integer userId =
(Integer)usersTable.getValueAt(UserBrowser.this.usersTa
le.getSelectedRow(), 0);
it not give me ID column's value .
i have a column in JTable like :
ID | Username | First name | Last name
i want to hide ID column , but get this ID's value
when user clicks on JTable row.Hi, if you would read the documentation about JTable.getValueAt(...) you will find, that there is a significant difference between this method and the datamodels getValueAt(...) method. JTables getValueAt(...) method interprets column-index as index in its TableColumnModel - in your TableColumnModel there is no column any longer that holds ID values, therefore you were not able to get it by JTable.getValueAt(...). Do not use these methods for the purpose you want it for - you will also get the wrong values, if the user has repositioned columns - the column index is always interpreted as index in the currently used TableColumnModel and IS NOT A MODELINDEX.
greetings Marsian

How can we get Dynamic columns and data with RTF Templates in BI Publisher

How can we get Dynamic columns and data with RTf Templates.
My requirement is :
create table xxinv_item_pei_taginfo(item_id number,
Organization_id number,
item varchar2(4000),
record_type varchar2(4000),
record_value CLOB,
State varchar2(4000));
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
select * from xxinv_item_pei_taginfo;
Item id Org Id Item Record_type Record_value State
493991     224     1265-D30     USES     fever     TX
493991     224     1265-D30     HOW TO USE     one tablet daily     TX
493991     224     1265-D30     SIDE EFFECTS     XYZ     TX
493991     224     1265-D30     DRUG INTERACTION     ABC     TX
493991     224     1265-D30     OVERDOSE      Go and see doctor     TX
493991     224     1265-D30     NOTES     Take after meal     TX
Above is my data
I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
its a BI Publisher report.
please suggest

if you have data in db then you can create xml with needed structure
and so you can create bip report
do you have errors or .... ?

How Can I get multi column values from dynamic search help?

Hi Gurus;
I'm using dynamic search help in my program.
I want to get multi column values from search help. But I dont know solution for this issue.
I'm using F4IF_INT_TABLE_VALUE_REQUEST FM.
How Can I get multi column values from dynamic search help?
Thanks.

Believe it or not, the same FM worked for me in a dynpro. I will try to explain here how it works in custom screen and then you can do your work for other screens or program types. I am not going to write my actual work but will explain in general.
I have 4 fields (FLD1, FLD2, FLD3, FLD4) and i made the search based on FLD2 and when user click on a line (could be any field), then this would bring the line on to the screens.
There are like 3 steps.
You have your value_tab for my fields FLD1, FLD2, FLD3 and FLD4. This is just the data that we pass into the FM. (data: IT_VALTAB type table of ZVAL_TABLE)
Next map the screen fields into an internal table (data: It_dynpfld type table of dselc ). I also have other internal tables defined (just to keep it straight, i will be putting here) data: It_return type standard table of ddshretval.
Next step is to call the function module. Make sure you have values in IT_VALTAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
        retfield        = 'FLD2'
        value_org       = 'S'
      tables
        value_tab       = It_VALTAB
        return_tab      = It_return
        dynpfld_mapping = It_dynpfld
      exceptions
        parameter_error = 1
        no_values_found = 2
        others          = 3.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
      with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    else.
      perform get_selected_fields tables It_return.
    endif.
The code within the perform GET_SELECTED_FIELDS - We need to map the result fields after user selects it. The code goes like this. This is step is to update the dynpro fields.
I need a internal table as well as a work area here. like,
data: lt_fields type table of dynpread,
        la_fields type dynpread.
field-symbols: <fs_return> type ddshretval.
so fill out LT_FIELDS from the IT_RETURN table
loop at lt_return assigning <fs_return>.
    la_fields-fieldname = <fs_return>-retfield.
    la_fields-fieldvalue = <fs_return>-fieldval.
    append la_fields to lt_fields.
    clear: la_fields.
endloop.
Call the FM to update the dynpro
call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname               = sy-repid
      dynumb               = '1002' "This is my screen number. You could use 1000 for selection screen (hope so)
    tables
      dynpfields           = lt_fields
    exceptions
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      undefind_error       = 7
      others               = 8.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
good luck

Forms 6.0-- How can I show records in a block in different colours.

In a multi record block, how can I show few records in one colour and few more in a different colour depending on a condition.

Use DISPLAY_ITEM.
This will change the visual attribute of the item in the current(!) record,
set_item_property changes the attributes of the item in all(!) records.

How can I show groupped columns inisde Diadem report ?

Similar Messages

Maybe you are looking for