How can i fix problem with audio in my iPhone 4 ?

please I can`t hear any audio only through speaks in my iphone 4.
WHY? PLEASE HELP ME

go to settings > general > usage > music app under the storage section > slide across the bar that says 'photo library' and a red delete button will appear
you can also plug the device into your computer with itunes, go to the photos tab at the top center and uncheck where it says 'sync photos.' then press 'apply' in the bottom right corner. this will erase the photos that were synced to your phone from the computer

Similar Messages

  • How can I fix problems with Bridge CS2 for Mac.

    How can I upgrade Bridge CS2 version 1.0.0.545 to Bridge CS2 version 1.0.3. The Installer says that I have a newer version installed. I am running a special version Photoshop CS2. When I launch Bridge CS2 v.1.0.0.545, I get a window saying that "Sorry, a serious error has been detected."  This software stays open after clicking the OK button. Please help!

    Spent a long time on phone with Apple tech support on this.  Here's what users all need to know:  it's likely the car manufacturer who needs to upgrade the vehicle software.  Pairing problems can happen whenever a phone is upgraded.  Now to find a dealer that's open after work!

  • How can I fix problems with freecorder?

    Ever since I installed Freecorder, I keep getting new akamai windows opening.

    hello brotmark, freecorder is adware - if you don't like to see ads please remove the program again and run a scan of your system with tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.

  • TS3694 How can I fix this type of error in iphone 4?"The iphone could not be restored. An unknown error occurred (3194) "please help me.

    Hi everybody !
    AT&T company is unlocked (factory)my iphone4 before 3 days ago so i want to restore to unlock iphone 4 with itunes but it is not restore.
    How can I fix this type of error in iphone 4?- "The iphone could not be restored. An unknown error occurred (3194) "
    please help me in nepali language(if posible) or english. thank you.

    http://support.apple.com/kb/TS3694#error3194
    This means that either your firewall/antivirus is blocking access to Apple's servers, or you have used your computer to jailbreak an iDevice in the past. The link above tells you how to resolve this issue.

  • TS2755 My voice to text is not working. How can I fix it? I have an iPhone 5. Thx!

    My voice to text is not working? How can I fix it? I have an iPhone 5. Thx!!

    The microphone icon is not available- it's there but a pale grey. I could use it now to type this but not when texting. Siri is enabled and working fine.

  • After updating iPod to iOS 5.0, cannot get into Game Center with previous nickname. It says my nickname is already in use by another account.  Why did this happen and how can I fix this with my old nickname and its data?

    After updating iPod Touch to iOs 5.0, I cannot get into Game Center with previous nickname.  The screen says my nickname is already in use by another account.  Why did this happen and how can I fix this so I can still use the same nickname?

    Did you haveany problem with updating to iOS 5? It soundsl like the update did not correctly restore from the backup that iTunes mnakes as the fisr step of the update.

  • My iphone 4s got water in the headphone port. I put my phone in rice for 24 hours and the LED light is on. It stays on even when the phone is off. How can I fix it with out spending 200 bucks at apple to have them fix it?

    My iphone 4s got water in the headphone poert. I put my phone in rice for 24 hours and the LED is on. It stays on even when the phone is off. How can i fix it without taking it to apple and spendding 200 dollars to have them fix it?

    Short answer is you probably cannot.  Once water gets inside the device and it is powered on, the damage likely is permanant. 

  • Upgraded to mac os x maverick 10.9.1. Any suggestions on how to fix problems with audio and video bugs?

    Having problems with video and audio delays for mac ox x maverick 10.9. Are there any ways to fix this?

    I also noticed that if I wiggle my mouse around while I watch video streams the video&audio is significantly smoothier.

  • How do I fix problem with linked and cropped image frames not printing properly when spanning pages?

    We are using InDesign (ID) to develop and print church bulletins which contain a combination of text frames and graphics. One of the graphic types we use are TIF files which are high-resolution scans of hymns.
    A hymn usually has a combination of the musical score, plus the lyrics - with many verses., so the modular structure is 'staff' composed of a treble clef, followed by verses, followed by a base clef.
    If the example above had 6 verses instead of one, we would crop the image by adjusting the frame, so that the treble clef and the desired verses showed through the frame.
    We would then copy and link the frame - piggy back - adjusting the next content window etc....so we build a custom version of the music as a series of linked frames - each with the same base image, but a different frame position.
    So this works fine, when we do this on a single page, but when we then add a 'last staff' at the top of the following page, we encounter print problems with some output devices.
    Imagine a two-page spread, with a full page of music on the left, and the last staff (treble clef, verses, base clef) unit as a separately linked frame at the top of the right page of the spread.
    It displays correctly, and will print individually as pages correctly, but when we print it as a booklet, the last frame drops out and we have blank space.
    I can print the document to PDF and it works fine, but if I print it to a copier or laser printer I get drop out.
    It is inconsistent.
    Previews are always okay. Individual page prints are okay, but when you print the entire document, the last frame in this kind of linked series gets blanked.
    If we create and name the image differently, and call it in as a new image - (not linked to the previous), but it is still a large image that is cropped to a small piece, then it doesn't print.
    If we save the last frame as a different image type (take the TIFF file into photoshop, crop it and save it as a jpg - so it is only the 'snippet') and then import it, it works fine.
    So my question to you InDesigners....is there some setting or tip or trick I need to know to be able to link a series of frames with the same base image, but different crops and make it span across two pages properly.
    Or do we need to play this game of crop and trim the image so that it doesn't drop out?
    Any thoughts, advice, direction would be gratefully received!

    I did a lot of such hymn things in the past, but I was alway working on the scans in Photoshop, like adjusting, retouching spots and cropping. And I was always seperating those images to be more flexible so I never run into such a problem.
    I am always scanning in a higher quality level than I would need, I scan it in color, this allows me to eliminate paper color easily, even if I need 1-bit images at the end, I do it in color, so I can also turn the image.
    I did once run into a similar problem with a scan I have got from a copier-scanner machine (it was not a song). But saving as PSD resolved my problem.
    So I would suggest: Open your files in Photoshop, resave them as PSD files and use those instead. If you use 1-bit images (which is fine for this type of images) you should use a resolution equal to the printer's resolution.

  • How do I fix problem with Smart Sharpen & CR as filter

    Smart Sharpen doesn't apply (or apply completely).   Photoshop CC on Mac OSX 10.7.5
    new merged layer > Filter > Sharpen > Smart Sharpen > adjust sliders > toggle Preview > click OK (progress bar) > nothing or 50% applied
    1. Smart Sharpen (SS) shows changes from sliders in SS dialog box AND on underlaying image in PS  but  checking and unchecking the Preview box only toggles the image in PS, the SS dialog box does not change.
    2. After clicking 'OK' SS does not  seem to apply at normal ranges but when the radius is cranked up to super ugly it appears to apply at about 50% (Opacity and Fill are at 100%).
    Related Problem:
    After using 'Camera Raw as a filter' on a new merged layer, then adding a layer mask, and then painting with a brush at 100% opacity and Flow, it appears that only about 50% opacity is applied to the mask from the brush.

    I did a lot of such hymn things in the past, but I was alway working on the scans in Photoshop, like adjusting, retouching spots and cropping. And I was always seperating those images to be more flexible so I never run into such a problem.
    I am always scanning in a higher quality level than I would need, I scan it in color, this allows me to eliminate paper color easily, even if I need 1-bit images at the end, I do it in color, so I can also turn the image.
    I did once run into a similar problem with a scan I have got from a copier-scanner machine (it was not a song). But saving as PSD resolved my problem.
    So I would suggest: Open your files in Photoshop, resave them as PSD files and use those instead. If you use 1-bit images (which is fine for this type of images) you should use a resolution equal to the printer's resolution.

  • How can I report problems with the Mozilla support website?

    Of course this is a problem with the website, not with Firefox, but "other products" is a dead end. I have sensory disabilities, so these are some of the bugs I've noticed, I don't know what bugs other people have noticed:
    1. There are too many animations. They hurt.
    2. Searching for "accessibility" turns up questions and answers using the word "access," which usually have jack to do with accessibility problems, accessibility solutions, accessibility tools for Firefox, etc. for disabled users.

    '''[https://addons.mozilla.org/en-US/firefox/addon/flashblock/ Flash block]''' {web link}
    Never be annoyed by a Flash animation again! Blocks Flash so it
    won't get in your way, but if you want to see it, just click on it
    This is probably a good site to be aware of
    http://www.accessfirefox.org/Firefox_Accessibility_Extensions.php
    It is a semi official mozilla community run site.
    IIRC the site and many of its addons were caught out by Australis.
    That is probably one site we should reach out to in advance if for instance making anything less distinct smaller, or lower contrast.

  • How can I fix problems after Lion OSX install?

    Just a couple of weeks after installing Lion, I am now experienceing the following problems:
    Tremendous slowdown in system use without any obvious reason
    I can't upload videos directly from iMovie to YouTube. It completes the upload, but I never see the video on the YouTube site, even after several days!
    I can't change my Desktop background. Whether I attempt from my pictures folder, or using System Preferences, after I highlight the picture I want to change to, nothing happens

    Try reinstalling:
    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • How can I fix a "loose" audio jack?

    The audio keeps cutting out from my ipod.  Mostly, the left earpiece will cut in and out, especially when I touch the cord. Can this be fixed? I have tried multiples headphones, and so I know it is an issue with the ipod itself.

    Your can get the jack replace by a third-party place.  Or you can replace it your self. Here are some places, some sell repair parts and provide instructions:
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    DigiExpress.us - The iPad Repair Professionals
    3rd Gen iPod touch Repair
    iPod Touch Repair

  • How can I fix: problem when making or receiving calls I must be on speaker, otherwise the person on the other end can't heAr me

    When making or receiving phone calls I have to be on speaker for the other person to hear me. What can I do to fix this

    Had the same problem when my dock connector of the iphone got wet. The phone thought that it was docked the whole time so the mic and speaker didn't work. The iPhone actually has 2 microphones. One is at the bottom by the dock connector (which is used for normal calls), and the other is a tiny whole at the top by the headphone jack, which is used for speakerphone. I would say that either the bottom mic needs replacing, or the dock connection is faulty or damaged and it is not able to use the bottom mic.
    Best bet would be to get it to Apple who will normally fix this kind of thing without fuss. Hope that helps.

  • How can I fix conflict with Thunderbird and my ISP (Shaw.ca) provided McAfee?

    When "Real-Time Scanning" is running, Thunderbird goes to "not responding" for a minute or so and CPU usage often goes to 100 %. If I turn off "Real-Time Scanning" TB seems to work okay, but I expect I am vulnerable to viruses. This problem has been going on for a couple of weeks.
    I used to use "Avira" with no problems but McAfee is provided "free" to subscribers.

    You can keep McAfee if you like, just disable email scanning as explained in the wiki link cited above.
    https://support.mozilla.org/en-US/questions/994969
    The free version of Avira might suit your needs, and by design it doesn't have the email scanning component of the paid version, a dubious benefit at best.

Maybe you are looking for