How can I get a static checkbox to default to ticked?

I have a checkbox on a form that I want to default to TICKED. I then need to check the value of the checkbox before deciding upon whether or not to do some processing (not if the checkbox is UNTICKED).
I have tried with the following values:
Default Value Type: Static Text with Session State Substitutions
Named LOV: - Select Named LOV -
Display Null: No
List of values definition: STATIC :;Y
My checkbox is always defaulting to UNTICKED. How can I get it to default to TICKED?
This is only my second week with APEX, so excuse me if I'm missing the obvious.
Thanks
Alistair

Is this what your looking for?
Try adding "CHECKED" to "HTML Form Element Attributes" in the element section of your item.

Similar Messages

I cut and pasted a description from the Internet. It posted as a link in iPhoto. It seems to have made a global change--all my descriptions are now blue, underlined, and Times Roman 12 rather than Arial white. How can I get this back to the default?

I cut and pasted a description from the Internet. It posted as a link in iPhoto. It seems to have made a global change--all my descriptions are now blue, underlined, and Times Roman 12 rather than Arial white. How can I get this back to the default?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

How can I get label of Checkbox?

Hi,
I have created the following checkboxes
private Checkbox playingCB, recordingCB, playbackCB;
private CheckboxGroup cbg;
playbackCB = new Checkbox("Playback mode", cbg, false);
I'm trying to get the "Playback mode" label in my actionPerformed(ActionEvent event) method
I have tried the getActionCommand() but it didn't work on Checkbox
It works on getting label of Button
How can I solve this problem when I really need to do it with actionPerformed method?
Thx
jojo

I don't know for sure, but having looked at the API documentation (http://java.sun.com/j2se/1.4.2/docs/api/) I'd guess.......
Checkbox selectedCheckBox = cbg.getSelectedCheckbox();
selectedCheckBox.getLabel();So maybe you need to pass your event handling class constructor a CheckboxGroup object, so you can then call the above code?

How can I get rid of checkbox on shut down window

This is the most irritating thing I have ever seen on Apple software since the 520K Mac. How can I keep it from appearing?

Don Archibald wrote:
baltwo wrote:
...not having an OFF button for each app that has that abdominal feature is the most irritating thing.
Maybe by the time OS X 10.9 rolls out there won't be any prefs settings at all - everything will be decided for us.
But things are not all bad. My iPhone has just gone down to get some beer while the MacBook is cooking pizza. Gotta love technology.
Cheers

Excel opens when i command a .csv file to open with numbers. How can i get numbers to be my default application?

I am sharing a Macbook Pro with my girlfriend. She runs Microsoft Office Excel for her work and I perfer Numbers in my work. Logged into my user account, I command an email attachment (.csv) to open with numbers. Excel launches every time. I can open numbers first. Excel still launches and opens the .csv document. i tried to trash the excel in my user account, no go. any suggestions?

Hi joric,
In Finder, right click or control click on the document and Open With > Numbers. You may have to navigate from Other...
Or, a permanent solution:
In Finder, click once on a .csv document to select it. Get Info (command i) Towards the bottom of that info window, is Open With. It probably shows Excel. Change it to Numbers. Again, you may have to navigate from Other... Then click on Change All.
I can open numbers first. Excel still launches and opens the .csv document.
Are you opening from within Numbers (File > Open)?
Regards,
Ian.

I am trying to install an app. When I click install, my old gmail account shows and asks for my password etc but I have a new gmail account that is associated with my apple id. How can I get it to default to the new gmail?

I am trying to install an app in my iphone. When I click Install, my old gmail account comes up for verification and it asks for my password etc. I dont use this account anymore and have a new gmail account that is associated with my apple account. How can I get the new gmail to default when I am trying to install apps?

Did you create a NEW Apple ID or did you change the email address for your OLD Apple ID? This will affect how you update apps in the future.
Anyway, go to Settings/iTunes&App Stores, log out, then log in with the new ID.

My Firefox start page had a check box for searching Canadian pages which was lost when I upgraded to 4.0. How can I get this back?

My Firefox start page had a check box for searching Canadian pages which was lost when I upgraded to 4.0. How can I get this back?

The default about:home page in Firefox 4 doesn't give such features. You can set the home page to http://www.google.ca to get that possibility. The results page has a "Pages from Canada" link in the side menu at the left.

How can I get Safari to keep the reading list pane open all the time?

I am really enjoying the Reading List pane in Safari. How can I get Safari to make it default that the reading pane is always open on every tab or window I open? I'm running Lion 10.7.3.
Thanks.

Hi Necris Rex,
If you are having trouble keeping the leading zeros even after first formatting the cells as text and then importing the csv values (perhaps you are importing the csv via File > Open into a new document) then you can restore the leading zeros without much trouble:
Insert a new column next to the column where the leading zeros have not imported as you want. Here I assume the original values are in column B and your new column is C.
Put this formula in column C: =RIGHT("00000000"&A,6) , and fill down the column.
Select column C, command-c to copy, and, with the column still selected, Edit > Paste and Match Styles.
Delete the original column that has the missing leading zeros.
Replace the 6 in the formula with the number of digits you need, so the formula knows how many zeros to "pad."
The above assumes you actually need the leading zeros back. If you just want to display things nicely in your Numbers table, then formatting as Numeral System and setting Places to 6 (or whatever) is quick and easy, no formulas required.
SG

I don't know how it happened but my camera was deleted,i tried downloading it from app store but i can't find it there,i tried downloading other photography app but it didn't work for it says my device has no camera.how can i get my cam back?

i don't know how it happened but my camera was deleted,i tried downloading it from app store but i can't find it there,i tried downloading other photography app but it didn't work for it says my device has no camera.how can i get my cam back?

Default apps are part of the iOS and cannot be deleted. Search all home screens and all folders and/or search for it with Spotlight, that will tell you what folder it's in.
Also check Settings > General > Restrictions to see if it has been restricted.
If not found, Settings > General > Reset > Reset Home Screen Layout.

In Acrobat, I wrote a script to turn fields gray if a checkbox was checked. How can I get it to reset to white (or clear) when the reset form button is clicked?

In Acrobat, I wrote a script to turn fields gray if a checkbox was checked. How can I get it to reset to white (or clear) when the reset form button is clicked?

Thank you so much for your reply . . . but . . . I should have shared my original script with you -- it was a little more complicated than I led you to believer. I was triggering a group of text fields to become disabled as well as gray. Below is the original script so that when the checkbox is checked, it causes several "Co" fields to be disabled and gray.
// Mouse Up script for check box
// If checked, certain fields should be disabled
var f_prefix = "Co";
// Get a reference to all of the "Co" fields
var f = getField(f_prefix);
// Reset the Co fields
resetForm([f_prefix]);
if (event.target.value === "Off") {
    // Enable the Co fields
    f.readonly = false;
    f.fillColor = color.transparent;
} else {
    // Disable the Co fields
    f.readonly = true;
    f.fillColor = color.gray;
To recap -- my goal is to get those gray fields to revert to transparent if the form is reset. I'm willing to create my own custom "Reset Form" button but I'm not sure I understand how that would look. Wouldn't it be quite lengthy? I think I'm having a brain freeze -- can't figure it out!

How can i get the speakers to work properly? they have a lot of static and scratchiness from them

how can i get the speakers to work properly, they have a lot of static and scratchiness coming from them?

I found my answer in this thread:
https://discussions.apple.com/message/16646999#16646999

HT4993 just purchased and iph5, the earphones have static. how can i get them replaced?

just purchased and iph5, the earphones have static. how can i get them replaced?

Take it back to an Apple store genius bar and have techs check them...if defective they will replace.

How can i get a array from a JSP ?

Hi all,
i have a STORED PROCEDURE like this:
static public void getMyArray(double [] xx) {
for (int i=0; i<myarr.length;i++){
myarr=3.145*i;
xx=myarr;
return ;
how can i get the array with XSQL and transform with a XSL ?
Is this at all possible?
Thanks for any help.
Achim

u r asking how ca u get array from jsp?
and u r asking xsql ...some stuff i couldnot understand .can u repeat the question properly?
null

How can i get all these values in single row with comma separated?

I have a table "abxx" with column "absg" Number(3)
which is having following rows
absg
1
3
56
232
43
436
23
677
545
367
xxxxxx No of rows
How can i get all these values in single row with comma separated?
Like
output_absg
1,3,56,232,43,436,23,677,545,367,..,..,...............
Can you send the query Plz!

These all will do the same
create or replace type string_agg_type as object
2 (
3 total varchar2(4000),
4
5 static function
6 ODCIAggregateInitialize(sctx IN OUT string_agg_type )
7 return number,
8
9 member function
10 ODCIAggregateIterate(self IN OUT string_agg_type ,
11 value IN varchar2 )
12 return number,
13
14 member function
15 ODCIAggregateTerminate(self IN string_agg_type,
16 returnValue OUT varchar2,
17 flags IN number)
18 return number,
19
20 member function
21 ODCIAggregateMerge(self IN OUT string_agg_type,
22 ctx2 IN string_agg_type)
23 return number
24 );
25 /
create or replace type body string_agg_type
2 is
3
4 static function ODCIAggregateInitialize(sctx IN OUT string_agg_type)
5 return number
6 is
7 begin
8 sctx := string_agg_type( null );
9 return ODCIConst.Success;
10 end;
11
12 member function ODCIAggregateIterate(self IN OUT string_agg_type,
13 value IN varchar2 )
14 return number
15 is
16 begin
17 self.total := self.total || ',' || value;
18 return ODCIConst.Success;
19 end;
20
21 member function ODCIAggregateTerminate(self IN string_agg_type,
22 returnValue OUT varchar2,
23 flags IN number)
24 return number
25 is
26 begin
27 returnValue := ltrim(self.total,',');
28 return ODCIConst.Success;
29 end;
30
31 member function ODCIAggregateMerge(self IN OUT string_agg_type,
32 ctx2 IN string_agg_type)
33 return number
34 is
35 begin
36 self.total := self.total || ctx2.total;
37 return ODCIConst.Success;
38 end;
39
40
41 end;
42 /
Type body created.
[email protected]>
[email protected]> CREATE or replace
2 FUNCTION stragg(input varchar2 )
3 RETURN varchar2
4 PARALLEL_ENABLE AGGREGATE USING string_agg_type;
5 /
CREATE OR REPLACE FUNCTION get_employees (p_deptno in emp.deptno%TYPE)
RETURN VARCHAR2
IS
l_text VARCHAR2(32767) := NULL;
BEGIN
FOR cur_rec IN (SELECT ename FROM emp WHERE deptno = p_deptno) LOOP
l_text := l_text || ',' || cur_rec.ename;
END LOOP;
RETURN LTRIM(l_text, ',');
END;
SHOW ERRORS
The function can then be incorporated into a query as follows.
COLUMN employees FORMAT A50
SELECT deptno,
get_employees(deptno) AS employees
FROM emp
GROUP by deptno;
###########################################3
SELECT SUBSTR(STR,2) FROM
(SELECT SYS_CONNECT_BY_PATH(n,',')
STR ,LENGTH(SYS_CONNECT_BY_PATH(n,',')) LN
FROM
SELECT N,rownum rn from t )
CONNECT BY rn = PRIOR RN+1
ORDER BY LN desc )
WHERE ROWNUM=1
declare
str varchar2(32767);
begin
for i in (select sal from emp) loop
str:= str || i.sal ||',' ;
end loop;
dbms_output.put_line(str);
end;
COLUMN employees FORMAT A50
SELECT e.deptno,
get_employees(e.deptno) AS employees
FROM (SELECT DISTINCT deptno
FROM emp) e;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE FUNCTION concatenate_list (p_cursor IN SYS_REFCURSOR)
RETURN VARCHAR2
IS
l_return VARCHAR2(32767);
l_temp VARCHAR2(32767);
BEGIN
LOOP
FETCH p_cursor
INTO l_temp;
EXIT WHEN p_cursor%NOTFOUND;
l_return := l_return || ',' || l_temp;
END LOOP;
RETURN LTRIM(l_return, ',');
END;
COLUMN employees FORMAT A50
SELECT e1.deptno,
concatenate_list(CURSOR(SELECT e2.ename FROM emp e2 WHERE e2.deptno = e1.deptno)) employees
FROM emp e1
GROUP BY e1.deptno;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE TYPE t_string_agg AS OBJECT
g_string VARCHAR2(32767),
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER
SHOW ERRORS
CREATE OR REPLACE TYPE BODY t_string_agg IS
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER IS
BEGIN
sctx := t_string_agg(NULL);
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER IS
BEGIN
SELF.g_string := self.g_string || ',' || value;
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER IS
BEGIN
returnValue := RTRIM(LTRIM(SELF.g_string, ','), ',');
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER IS
BEGIN
SELF.g_string := SELF.g_string || ',' || ctx2.g_string;
RETURN ODCIConst.Success;
END;
END;
SHOW ERRORS
CREATE OR REPLACE FUNCTION string_agg (p_input VARCHAR2)
RETURN VARCHAR2
PARALLEL_ENABLE AGGREGATE USING t_string_agg;
/

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

How can I get a static checkbox to default to ticked?

Similar Messages

Maybe you are looking for