How can I get QoS over a WDS bridge to work on Cisco WAP551

I have two Cisco WAP551 devices bridging two physical locations wirelessly across the street from each other. This is replacing a much, much older wireless bridge that has been rock solid as far as reliability. The new bridge is functioning great, however voip quality has gone completely out the window over this bridge. I tried to set up some quality of service, but I am unsure how it works here. It seems either the QoS doesnt function on the WDS VAP, or the built in QoS queue for voice data is not picking up my voip systems data packets. It is an older 3com NBX phone system.
If i reconfigure the devices to talk over actual VAPs rather than the WDS system ("WorkGroup Bridge"), will this allow QoS to function? Since then each device would be a client rather than a WDS VAP connected to each other (that the QoS doesnt seem to trigger on??) Id rather not do this since WDS works so well and it is the recommended system (as far as i have read)

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Similar Messages

How can I get my HP Officejet Pro 8100 to work. I had HP on the phone for over two hours and thought it was fixed. Now it just will not print at all.

How can I get my HP Officejet Pro 8100 to work.
I'm using an iMac (21.5-inch, Late 2013) running Yosemite. I spent hours on the phone with HP who did their best and thought they had solved the problem Now it has stopped printing completely. Just says 'idle' or' connecting to printer' but never does.

Greetings paulr.paulr,
Welcome to the Apple Support Communities!
I understand that you are unable to print from your Mac running Yosemite on your HP Officejet Pro 8100. I know that printer issues can be very frustrating, but I believe the information in the attached article will be able to assist you. I would suggest reading over and systematically working your way through the suggested troubleshooting steps located in the following article. If any issues arise as you work your way through the steps, or if you work your way completely to the end and reset the printing system and the issue continues, please let me know.
OS X Yosemite: Printing troubleshooting
Cheers,
Joe

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0? I have looked through all the reports and I cannot find a report that gives me the CDP neighbor information of an access point. I thought that information was in there, however I cannot seem to find it.
Thanks in advance!

Hi
You can get this from an inventory report in PI (Select Report Type AP). Here is an example of PI 2.1 works for me. Once you export this into excel you can sort based on controllers & filter the single controller connected AP you want.
Regards
Rasika
**** Pls rate all useful responses ****

I have purchase iphone4 from someone,it is not factory unlock ,how can i get it factory unlock,its safari not working and its not showing drive on my computer

i have purchase iphone4 from gray market,it is not factory unlock,how can i get it factory unlock,
its safari not working and it is not showing drive in my computer.

iPhones are sold in carrier-locked and unlocked versions. If the phone has a carrier lock on it, you must contact the carrier to have it removed (you probably need to bring the phone to the carrier for the process). If you don't know the carrier, you won't be able to get it unlocked. US carriers will not remove the carrier lock and it cannot be removed.
How is Safari behaving that makes you say that Safari is not working? The lock status of the phone won't affect Safari, except that if the phone is locked and you aren't using the carrier (and SIM provided by the carrier) to which it is locked, then you can't use the phone or 3G service, only Wi-Fi.
The iPhone should not appear as a drive on your computer, so there's no error there.

How can I get the magnifying glass in Preview to work?

I have the problem that the magnifying glass in Preview is simply a grey circle. It's not magnifying anything. Does anyone of you know where the problem is? How can I get it to work? Deleting the .plist files in the Prefs didn't do the trick. Thank you very much.

I don't believe there is such a thing on the Mac Pro (trash can), but I did finally get something to work with a not-very-instinctive combination of System Preferences (select USB mic), Audio MiDi Setup (select USB mic), and Premier Pro Preferences, Audio Hardware (DO NOT select the USB mic, but rather the System Default Input/Output). No other combination worked (I tried them all), and when I tried changing Audio MiDi settings while Premier Pro was running, I'd occasionally get the endless spinning wheel that required a re-start. Even with all this, one channel was peaked-out with noise (source?) which I couldn't eliminate with any settings (can do it in post, however). Overall a disappointing experience. I don't know why the Audio MiDi Setup has to be involved, or why this was so difficult with my set-up (I'm not ruling out user error).
Any further advice is more than welcome,
David

How can I get address book 4.1.2 to work with osx 10.6.7

How do I get address book 4.1.2 to work with osx 10.6.7

You probably can't, but you can start by posting your queston in the correct forums...the OS X Mail and Address Book forums, as this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to your question in any way.

How can I get vertex colors on a mesh to work properly on a PDF 3D

Hi everyone,
I am working with GeoMagic Wrap 2013, a software for modelling meshes.
I digitalize objects through a 3d scanner.
The Scanner can digitalize objects, generating a mesh, either with .stl or .obj extensions.
.Obj is useful because you can retain the original color of the object you are acquiring when getting the mesh.
What Wrap 2013 let me do, among other functionalities, is to export the mesh in the .pdf format as a PDF 3D.
The issue is that what i see in Wrap 2013 is this:
but what i get when i export them in PDF 3D is this:
which is unconvenient because the point of this is to provide a potential client with a fully rotatable and zoomable preview of a product he/she is interested in.
How can i get the original colors to render properly on a PDF 3D?
Thank you

Thanks Dave,
I am not so technical about the subject but what you are saying (and what is written on the topic you liked above), is that is not possible to achieve the result i'd like with my model using PDF 3D?
What is quite annoying is that many mesh modelling softwares now provide PDF3D export service but practically forcing you to use uniformed colors that are really not suitable for certain use... you can't have a model with the original (or vertex more in general) colors...
That would be really a pity to say the least, especially considering that after some work time i can have really nice looking models within my sofware and no way to present it to the client except some really "flat" photos :/

MY ipod Touch is Stuck & says Disabled it will not come out of that screen at all. How can I get that off so my device will work

MY ipod Touch is Stuck & says Disabled it will not come out of that screen at all. How can I get that off so my device will work

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer.

How can I get outgoing mail in Mail program to work consistently?

Some times using Mail messages can be sent immediately on any of my several accounts including a gmail account. Other times no mail can be sent perhaps until the next day. It just read sending. If I transfer my outgoing gmail messages to gmail on safari I can send it immediately. I am changing no settings and incoming mail is coming in without difficulty. This is most frustrating if I am trying to response to a message and I can't get it out until the next day. Any suggestions? Thank you

I have had sbcglobal dsl and now Uverse and periodically have had the problem of outgoing mail being rejected by the smtp server. The problem has been changes made at the server by the isp. I make no changes and things go from working to not working. Over the last 6 years I have gotten pretty good and "fixing" the problem by deleting accounts and reentering the data in the Mail program and at the AT&T website. A process they call verification is involved. Now it is broken and it is unfixable.
I have spent the better part of the last 3 days trying to get a third party or vanity email address to verify. The panels say I have successfully verified my address but it will not send. Along the way I have read a lot of stuff on various forums and am thinking that the issue may be the same between at&t and other big providers... they shut down 3rd party address on smtp in their war on spam.
So we called att support and were told we would have to pay for premium support. We asked instead to cancel our service. We signed up with a local dsl service (Houston) and discovered to our dismay that DSL does not equal DSL. The local service has never been able to swap over a Uverse dsl service. So we were back to Uverse to have Uverse dsl canceled and regular at&t dsl installed.... it is like dealing with two different companies. Along the way we discover that at our location we will lose the 6 Mbps service and only be able to get 1.5 Mbps... our modem will have to be changed out and at this point we are sad and weakened. The Uverse rep offers to lower the premium support charge from $30 to $15 so we gave in and signed up for it. The next day I get the very polite and seemingly competent Paulo on the line. We get set up for him to take over the cursor and we start reviewing my settings. Bottomline. I had all my settings perfect... practice, practice etc. They were absolutely correct on every panel. Paulo got to see that the verification does not work and that it is not possible to set up a "reply to" third party address that will work. Paulo was very nice and very baffled. He invited me to call back but he really had no idea about what to do to get things working.
By this time I am feeling pretty defeated and trapped... I cannot reasonably move to another provider and no one at AT&T can make it work. There is a happy ending for me in this though and this could work for someone else which is why I am making this long post. My vanity email is from an email forwarding service where I have had an account for 12 years. My isps change as my job has moved me overseas and back and across the US several times... my email address does not change. The company I use is pobox.com I was looking around at their website and noticed that my service includes use of their smtp server. I printed off the instructions, which they have for about 20 mail clients, pc, mac, et al and within 10 minutes I was sending mail from [email protected]. I got no error messages and when the mail arrived it showed from [email protected] and when we replied to that email it put [email protected] in the to:. Man am I happy! This fix did not cost me incremental $ and it was easy. The service costs $20 per year for a single year subscription... I have a 5 yr which runs me $15 per year. There are other benefits to the service... decent spam filtering and url forwarding.
If you are having a problem with a vanity address not working through your isp smtp server and you can stomach $20 per year, go on over to pobox.com and tell them Pam sent you.
ps the other thing that I got to work was sending mail out from my mobileme account using their smtp server. Mobileme will not allow me to use my vanity address but I am happier having .mac in my return address than att or sbcglobal.

How can I get the new version of iTunes to work like the old one?

When I upgraded to iTunes 11, the next time I synched to my iPods etc, many, if not most, of the favorite podcaststhat I had saved in my library got deleted. We are a Mac family and three of us download different podcasts to three different computers. All our dealings (purchases) have been handled through a single Apple ID account.
Since the change to version 11, all the podcasts are jumbled together. I want to subscribe to different podcasts than my wife or son, but our different computers are being treated as one. I'll click to be a subscriber and my son will get the downloads, and vice versa. What a mess!
Is the registry of all three units to a single Apple ID the source of the problem?

When you say "not possible," I assume you mean I can't get it to look like the old version. When I wanted to update the different podcasts, I could hit refresh and select from those available. That seems off the table. And what's with the confusion between computers?

How can I get my app store and itunes to work in my iphone without dumping everything?

I have already dumped my phone twice to get itunes and the app store to work and it only lasts for a small time. I don't want to dump all my info again and then get everything back to what it should be just to have the stores go down again. Every time this happens some of my other apps don't work like they are suppose to work. When I try to ask for help from "professionals" I am treated like no one knows what I am talking about, but every other person I know that has an apple product is having the same issue. I don't know why it is not being fixed and why I am having to dump everything once or twice a week to keep my ipod and iphone working properly. You have to dump everything and not restore from back up to get it work. This is becoming completely unacceptable. If anyone knows any tricks at all please let me know. (And I have tried the deauthorizing and reauthorizing stuff... it will only let deauthorizing and will not let me sign back in) Thanks.

You get the develop module to function properly by installing the standalone installation of Lightroom. If the develop module is disabled you still have the creative cloud installation. It will have to be removed. You can download from here:
Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.7.1
Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.7.1
Performing this uninstall/reinstall will have no impact on your images or the work you have done in Lightroom. The catalog and your images are left intact.

How can I get the hot spot connection to say working on my phone?

I cannot get my hot spot connection to stay working.

There are phone companies that do only allow tethering with more expensive rates. Would have to talk with your company to see if your phone can rate tethering.

How can I get my Toshiba fingerprint password utility to work with ff4?

My tosiba laptop has a utility that would remember usernames and passwords, so that I could just swipe my finger and the details would prepopulate - this worked in previous version of ff but not ff4

Take a look at this page to determine if your model is compatible:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
If you can't get it to work, post back - as long as you can get your memory card to appear on the desktop, you can use something like MPEG Streamclip to convert the video to a format iMovie can work with.

How can I get a USB 2.0 hub to work on my 2008 MacBook pro?

Burned out my old USB hub and cannot get a new USB 2.0 to work at al. What can I do?

It is traditional that when a solution to a posted issue is found that the solution be posted rather than just "I figured it out". That way others with the same or similar problems can benefit from your solution.

HT4623 how can i get the numbers and keynote app to work on my imac?Help!

I downloaded the numbers and keynote apps but how do i get them to open and work on my imac or ipad?

If you downloaded the iPad apps in iTunes on your computer, you have to sync them to the iPad. If you downloaded the Mac apps from the Mac App Store, they should open on the Mac, so I think we have to assume that you downloaded the apps for the iPad.
The apps that work on the iPad do not work on the Mac, and the Mac apps will not work on the iPad. The Mac and the iPad have different operating systems so you must purchase the apps for both the computer and the iPad.
If you did buy the iPad apps in iTunes on the Mac - sync them to the device.
Connect the iPad to the Mac and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Apps Tab on the right.
Click on all of the apps that you want to sync in the list
Click on the Sync Apps Heading.
Click on Apply in the lower right corner of iTunes

How can I get QoS over a WDS bridge to work on Cisco WAP551

Similar Messages

Maybe you are looking for