How can I get the whole URL to my BSP Controller

Hi,
I need to build up a html-link with my bsp-url. How can I get the whole url to a specific controller, but without the session-id (sap(id))?
I need something like the following:
http://server:port/sap/bc/bsp/sap/<application>/<controller>.do
Thank You!

Hi Arne,
you can create the URL with the method:
CALL METHOD cl_bsp_runtime=>if_bsp_runtime~construct_bsp_url
   EXPORTING
      in_application_ns = ...
      in_application    = ...
      in_page           = ...
      in_parameters     = ...
    IMPORTING
      out_abs_url    = ....
Regards,
Rainer

Similar Messages

I have a orange audio bar that doesn't extend to the end of the video clip. How can I get the whole audio?

In my video clip there is an orange bar that does't extend to the end of the clip. I think this is an audio bar. How do I get the full audio to play when I move the clip to the project?

Did you try to set it up "as new ipod" without using the latest backup? The backup might contain damaged data causing your problem. If setting up "as new" does not work, you'll have to get it serviced.
Setting up as new device and transferring data before doing this is covered here: http://support.apple.com/kb/HT4137

How can i get the full URL of a page displayed rather than just the main website URL

I'm using Safari 8.0 on an iMac. When I go to a website I'm used to seeing a specific page URL displayed /changing as I navigate around a site through its various subsections etc. Now after updating to Yosemite all I get is the URL of the general website. This means I can't make specific references/links in work that I'm doing/sharing. There must surely be a way of getting the info into the bar so that I can copy it .... can anyone help please?

Jorge Huedo wrote:
> Yeah i know it was because i was getting crazy and i wanted to see debuggin if the image really existed in the km.
> Okey I have use the IUrlGeneratorService like this.
>
>      IURLGeneratorService ugs = (IURLGeneratorService) ResourceFactory.getInstance().getServiceFactory().getService(IServiceTypesConst.URLGENERATOR_SERVICE);
>      IUriReference uriRef;
>      uriRef = ugs.getRelativeUri(PathKey.IMAGE_PATH).appendPath(
>      resourceimg.getRID().toExternalForm());
>
> And it has returned me the next url:
>
> irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/public/mimes/images/pip_hesaeventos/blank.JPG
>
> Now i have added to the base of the server the url:
>
> http://altp4.es.heiway.net:54500/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/public/mimes/images/pip_hesaeventos/blank.JPG
>
> And the return is:
>
> 404
> El recurso solicitado no está disponible.
>
> Any idea?
You need to use the propert PathKey; I think CONTENT_ACCESS should be correct.

How can I get the whole hierarchy of a dimension member ?

In the Oracle example jspDrillthrough I retrieve the dimension member of the clicked cell in the crosstable.
Please suppose the geography dimension has some levels like countries and continents.
What have I to do to get the complete hierarchy of the geography dimension concerning the clicked cell and depending the drilled dimension level ?

Please Help!!!

IMac stopped recognizing my Internet connection (ethernet) after announcing an IP address conflict (all of a sudden, after 6 years). How can I get the whole network settings part back to default and start over?

I had no trouble getting on line until last week when a message came on that
IP address 192.168.0.139
was in use by
04:0c:ce:54:c1:e5
DHCP Server 192.168.0.1
Since that time, no matter if I plug it into one router or the other (I use a router in my office to share the one ethernet cable that comes down the hall) it claims that the ethernet is working and it knows that it is connected to the Internet,but it cannot access the Internet. IT seems to be stuck in a cycle of navel-gazing, constantly focused on its own ethernet IP address.
All I know how to do is operate the thing; we have no IT person here. A visitor set up our network for us a few years ago. Only the iMac has this problem; my PC laptops go online just fine. But all my work is on the iMac.

First thing to try is renewing the DHCP lease.
System Preferences > Network.
Do you have a green dot next to Ethernet? If so, with ethernet selected in the left pane;
Check the location is set to 'automatic'
Check 'configure IPv4' is set to DHCP
Click the 'Advanced' button
Check that DHCP is selected in that window for IPv4
Turn off IPv6 (gives a conflict on some routers)
Click the button 'renew DHCP lease'
That should persuade the router to give you a different IP.

I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

How Can i get the URL of a page

How Can i get the URL of a page . like in ASP the
Request.QueryString() ...
Thanks

Are you wanting actual URL or just the url (query string
variables)?
For url variables you would reference the structure.variable
name like so:
#url.variablename#
So if you had a url like this:
http://www.somedomain.com?page=home&action=view
You could access the variables like so:
#url.page#
#url.action#
If you are wanting to actual page you could use:
#cgi.script_name#
Bryan Ashcraft (remove brain to reply)
Web Application Developer
Wright Medical Technologies, Inc.
=============================
Macromedia Certified Dreamweaver Developer
Adobe Community Expert (DW) ::
http://www.adobe.com/communities/experts/
"Yasmin_lady" <[email protected]> wrote in
message
news:e4fhjv$fpl$[email protected]..
> How Can i get the URL of a page . like in ASP the
Request.QueryString()
> ...
> Thanks

HT203433 i purchased a cd on my phone but the whole cd didnt download to my computer how can i get the missing tracks to download

i purchased a cd but when downloaded to my computer some of the tracks was missing how can i get the missing tracks to download???

On computer go into iTunes store, in the Quicklinks section click on purchased, go to music not on this computer and you should find all music still in the cloud.
On phone open music, choose store at top of screen, then choose the More option at bottom of next screen, look in downloads where anything waiting to download should be. If nothing there go to Purchased, click on Music, Not on this Phone and you should see any iTunes music you have bought that is not downloaded to the phone.

HT203200 how can I get the songs I paid for when I paid for a whole album and only got part of it

Today I purchased Rick Dankos album but some songs were left out how can I get the music I paid for ?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

How can we get the values from the view?

Hi All,
my scenario is i have two fields in my view .one is parameter.and another on is select-options.how can i get the user entered values into my selection screen.?
for the select options i get the values into field-symbol.for parameter i get the value using get_attribute.
can i use like this in select statement.
WHERE SERVICE_ID = ZSD_DD_AUFNRS
 AND CRE_DT IN <FS_DATE>.
Regards,
Ravi.

Hi Sravan,
when i am using the below code to generate self defined functions i m getting a error .
*Generate an object for self defined functions
DATA: lo_self_functions TYPE REF TO if_salv_wd_function_settings,
*Generate an object for button 'Confirm'
 lr_button TYPE REF TO cl_salv_wd_fe_button,
 lo_self_function TYPE REF TO cl_salv_wd_function,
 l_text type string.
*Set Self-defined functions
*'Confirm' Button
lo_self_functions ?= l_value..
lo_self_function = lo_self_functions->create_function( 'CONFIRM' ).
CREATE OBJECT lr_button.
CLEAR l_text.
l_text = 'Confirm'.
lr_button->set_text( l_text ).
lr_button->set_image_source( '' ).
lr_button->set_image_first( 'X' ).
lo_self_function->set_editor( lr_button ).
Error when processing your request
What has happened?
The URL http://cgslsvr3.cgsl.com:8020/sap/bc/webdynpro/sap/zsdr_cash_work_list/ was not called due to an error.
Note
The following error text was processed in the system CGD : WebDynpro Exception: IDs Can Only Contain Characters of Syntactical Character Set
The error occurred on the application server cgslsvr3_CGD_20 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CONSTRUCTOR of program CL_WDR_VIEW_ELEMENT===========CP
Method: CONSTRUCTOR of program CL_WD_TOOLBAR_BUTTON==========CP
Method: NEW_TOOLBAR_BUTTON of program CL_WD_TOOLBAR_BUTTON==========CP
Method: IF_SALV_WD_COMP_TABLE_UI~CREATE_TOOLBAR_ITEM of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~CREATE_TOOLBAR_ITEMS of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~UPDATE_TOOLBAR_ITEMS of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~UPDATE_TOOLBAR of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CGD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server cgslsvr3_CGD_20 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server cgslsvr3_CGD_20 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 110 -u: CT-0024 -l: E -s: CGD -i: cgslsvr3_CGD_20 -w: 0 -d: 20080414 -t: 105835 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
How can i resolve it?
Regards,
Ravi

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

I am using 3.6. How can I get the update to look just like this version? I truly don't want to use IE or MSN but if that is all I have, then let me know. Thanks

I am using 3.6 because I like how it spreads out my toolbars instead of just giving me the bookmarks in the corner and the lonesome firefox in the opposite corner. I know I can open the bookmark toolbar but it is not the same. I want the file, edit, view, history, bookmarks, tools, help toolbar across. How can I get the new firefox to do that

This should duplicate the image that you posted as your preferred appearance for Firefox 5 in the above (request to be LOCKED) duplicate thread.
'''Menu Bar''' 
*right-click empty space at the end of the Tab Bar, click "Menu Bar" to place a checkmark
*Menu Bar checked = Menu Bar on; Firefox button off
*Menu Bar un-checked = Menu Bar off; Firefox button on
*Other methods of doing the same:
**click Firefox button > Options, click Menu Bar
**Quick toggle Menu Bar on/off: ALT+V+T+M
'''Tabs on Top''' 
*right-click empty space at the end of the Tab Bar, click "Tabs on Top" to remove the checkmark
*Tabs on Top checked = Tabs above toolbars
*Tabs on Top un-checked = Tabs below toolbars
*Other methods of doing the same:
**click Firefox button > Options, click Tabs on Top
**Quick toggle Tabs on Top on/off: ALT+V+T+T
'''Separate Reload / Stop buttons and position of Home button''' 
*Open the Customize window; do one of the following:
**right-click the empty space at the end of the Tab bar, choose "Customize"
**click Firefox button > Options > Toolbar Layout
**if using the Menu Bar, click View > Toobars, click Customize
**Quick open Customize window: ATL+V+T+C
*the Reload and Stop buttons will be shown separate between the URL/Location bar and the Search Bar. While the Customize window is open, do one of the following, to keep the buttons separate:
**drag the Stop button to the left of the Reload button
**drag a "Space" between the Reload and Stop buttons
**drag one or both buttons anywhere on the Navigation bar separated by a "Space" or another icon or reverse the order to Stop-Reload to keep them separate
*drag the Home button to the right of the Search Bar
*click "Done" at the bottom right of the Customize window when finished.
'''Color Back/Forward, Home, Stop and Reload buttons''' 
*Install this add-on: https://addons.mozilla.org/en-US/firefox/addon/firefox-3-theme-for-firefox/
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]

My wife and I each have an iPhone and an iPad Mini. We have separate iTunes accounts. She just finished reading a book on her iPad Mini. Now I want to read it on my iPad Mini. How can I get the book on my iPad Mini?

My wife and I each have an iPhone 4s and an iPad Mini. We have separate iTunes accounts. She just finished reading a book on her iPad Mini. Now I want to read it on my iPad Mini. How can I get the book on my iPad Mini?

Thank you for your reply Domingo. Your suggestion worked as far as sending me a link to buy the book at iTunes. But it did not allow me to download the book from my wife's account. I did finally get an answer from Apple. It took an entire day of emailing back and forth and the final answer was relatively easy once Apple finally decided to give up the solution. Basically, you have to open ibooks and sign out. Then you have to sign into ibooks using the book purchaser's Apple ID and password. Then you can download the book onto your device. Not too bad, huh? It only took a whole day of Apple people sending me wrong instructions before they figured it out. Geez. What a disappointing experience.

How can I get the template( word rtf ) for PO – Printed Purchase Order ?

I want to convert the “PO - Printed Purchase Order” report from Oracle rdf format to BI Publisher. I am looking for the template but could not find in UNIX.
As per the Oracle blog, the template is available. Please see the URL : https://blogs.oracle.com/xmlpublisher/resource/121BIPReports.pdf
The template code is POXPRPOL_XML.rtf
when I look at the $PO_TOP/patch/115/publisher/templates/US directory, I cannot find POXPRPOL_XML.rtf
How can I get the template( word rtf ) for PO – Printed Purchase Order ?
Thank you,
Biju Varghese.

How can I get the template( word rtf ) for PO – Printed Purchase Order ? XML Publisher Administrator -> Templates
find by code or name
open it and you can downloadtemplate by "download" button

How can i get a full url of video uploaded in asset library on sharepoint 2013

Hi All,
I have videos in SharePoint 2013 Asset Library, now i want display that videos in my SharePoint webpage as a webpart.
Now, how can i get a full url of video uploaded in asset library?
Thanks in Advance!

The Asset library does a pretty good job of hiding the full URL. An "asset" item is actually a folder. The folder contains the video and support files like preview thumbnails.
So, if you upload a video named butterfly.wmv to http://yourSite/sites/demo/Assets the path to the video would be http://yourSite/sites/demo/Assets/butterfly/butterfly.wmv. If the user changed the name while uploading the file to "Pretty bugs"
the URL would then be http://yourSite/sites/demo/Assets/Pretty%20Bugs/butterfly.wmv.
Probably the best way to explore these hidden folders and discover the "real" URL is to use SharePoint Designer 2013.
Launch SharePoint Designer and open your site.
In the Navigation area click "All Files". (If you don't see All Files then your administrators may have partially locked down SPD.)
In the list of files and folders click the Assets library.
Find and click your video (you will see the "Name" as entered in the file's properties, not the file name.)
Find the video file, right-click it and click Properties.
Copy the Location.
If you just want to display the video in the page:
Edit the page
Click INSERT
Click Web Part
From the Media and Content category select Media Web Part and click Add.
Edit the web part (click the web part's dropdown)
From the MEDIA ribbon click Change Media
Click From SharePoint and navigate to your assets library and pick a video
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

How can I get the whole URL to my BSP Controller

Similar Messages

Maybe you are looking for