How can i improve the battery life of my iphone 5s, it drains to fast and i don't know what to do?

how can i improve the battery life of my iphone 5s, it drains to fast and i don't know what to do?

http://www.apple.com/batteries/iphone.html
Take a look at this to make sure your settings are optimized to the best it can be.
If all else fails, try and restore through iTunes, set up as a new iPhone and manually sync your apps and media back to your iPhone.
If still persists after this, you might call Applecare and see if they can run a battery diagnogstics..

Similar Messages

  • How can i extend the battery life of my iphone 4s? when i left it in standby mode when i saw in 5hours it drains to 5%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

    How can i extend the battery life of my iphone 4s? when i left 50% it in standby mode when i saw in 5hours it drains to 5% i saw 45%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

    I was not aware of the fact one could use ringtones as alarms, this will suffice! Although I foresee some very awkward times as the sound does not stop once I respond to the reminder (it keeps going for good five - ten seconds after I "stop" the reminder), but it's better than missing it altogether!
    Thank you very much!
    Regarding the Alarmed app, doesn't it have to be running to actually remind you?
    -Modular747: I don't know anyone who actually reads the terms of service agreement, those things are usually up to thirty, small print pages full of legal jargon. Rules, I do read - not the legal documents (also they often contradict the laws in my country, but that's a whole different story).
    I agree with you - the average customer support consultant mostly cares about keeping his job and earning his salary (don't we all?) and thus racking up completted tasks (i.e. getting rid of customers as fast as possible - in a good mood). The "threat" none the less is real, if a cell phone causes me more trouble than it is worth, I will indeed throw it away (I have done so before) - and recommend a different brand to anyone willing to listen.
    Don't get me wrong, I love Apple and I've been faithfully using and recommending their producs for twenty years now, not because of fanboyism, but because they earned it. This calendar issue, however, is like a toaster that doesn't automatically eject the toast at the set time. I see it as a major flaw and after googling around a bit I see that it's been around since at least 2007 (THAT'S SEVEN YEARS!!) so I strongly believe they are aware of this problem by now, but are choosing to ignore it for some mysterious reason and it really ****** me off.
    I will send the feedback but based on my observations I suspect the Send button is merely a cleverly disguised Delete button.

  • I dont know why the battery life of my iphone 4 is so low ! i really want to know how many hours i'll have if it's on standby. And how many hours if i use it normally for music and facebook (sometimes a little bit games)

    i dont know why the battery life of my iphone 4 is so low ! i really want to know how many hours i'll have if it's on standby. And how many hours if i use it normally for music and facebook (sometimes a little bit games) !!!

    to enhance your battery life, keep screen display to minimum, set screen lock automatically after 1 min, select internet notifications to off.

  • Nokia Lumia 928 apparently died after an attempted Windows 8.1 update.  Replacement phone arrived the next day.  How can I restore my contacts, photos, etc.?  Backup assistant is no help and I don't know how to access the Cloud.

    Nokia Lumia 928 apparently died after an attempted Windows 8.1 update.  Replacement phone arrived the next day.  How can I restore my contacts, photos, etc.?  Backup assistant is no help and I don't know how to access the Cloud.

    Did you have the phone set to backup things to the One Drive on Microsoft servers?

  • HT201472 How can I locate the last location of my iPhone 5s because it is dead and cant be located offline?

    How can I locate the last location of my iPhone 5s because it is dead and cant be located when its offline?

    Apple does not offer a user-searchable log of where the phone has been. Not saying they don't keep one, but I think you'd need a search warrant or work for the NSA or FBI to get access to such data.

  • HT1420 How can I reauthorize my computer?  There is nothing for me to click on so I don't know what to do.

    Since the iOS7 upgrade I have had nothing but issues with my iPhone 4.  I have redone everything I can, took iTunes off the PC and reloaded.  I deauthorized all computers and went to re-authorize my laptop and there is no place to click to reauthorize it.  HELP!  About ready to throw this all out the window!

    Authorization and Deauthorization
    Macs:  iTunes Store- About authorization and deauthorization.
    Windows: How to Authorize or Deauthorize iTunes | PCWorld.
    In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
    More On De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

  • For some reason when I play my Imovie the second half of the movie's sound just stops working and I can't hear anything.  It was working before but now it isn't and I don't know what to do.

    When I was putting together an Imovie I put music in the background and it played fine in the beginning but now when I watch it the first half of the movie plays music while the second half is silent even though I put music there as i did with the first half.  So basically...the music in the second half of my movie is not playing like it used to.

    GUYS THIS IS URGENTLY URGENT PLEASE!! if it helps, maybe being the stupid person I am, I might have accidently muted it so maybe if you guys could just tell me how to unmute, or see what is muted that would be REALLY helpful.  Thanks
    By the way I know you just read this and you're probably wondering why I am replying to myself....BUT THAT IS JUST HOW IMPORTANT THIS QUESTION IS.  PLEASE HELP ME.

  • When I try downloading Kindle for PC Windows 8 I get the message "this link needs to be opened with an applicatio"-and I don't know what I have to do

    Hi, I have just brought a new laptop running windows 8 and have installed Firefox. My old laptop was running XP and I didn't have a problem running Firefox on it. I am trying to install Kindle for PC on my new laptop but I keep getting the message "this link needs to be opened with an application". I've never seen this message before on any web browser that I have used. I have "googled" the question and some suggestions are:
    > reloading Firefox-no point I've just loaded it
    > downloading through Internet Explorer-which I don't want to do as I want Firefox my browser of choice
    > Some talk of changing profiles-which I haven't a clue about.
    Any help in plain and simple English and assuming I have no prior knowledge (I'm a car driver rather than a mechanic) will be greatly appreciated.
    Thanks in advance

    I'm not familiar with downloads from the Windows 8 app store. Have you had problems with any other store downloads, or just this one? Is it an option to save the file?

  • When I try to go to the profile manager, the Mac Terminal says this: "dyld: unknown required load command 0x80000022" and I don't know what that means!

    Firefox has been acting up lately, so I was going to create a new profile and copy over some stuff from the old one to the new one. I followed the instructions on the troubleshooting page, but when I tried to type in /Applications/Firefox.app/Contents/MacOS/firefox-bin -ProfileManager, the Terminal says dyld:unknown required load command 0x80000022. I know Firefox is closed, so I have no idea what's going on. Please help!

    add "arch -i386 " at the beginning of the command
    See http://support.mozilla.com/en-US/questions/838031

  • How can I use the battery and let it be perfectly healthy?

    Hello everybody!
    I love this forum because everyone is a great helpful person.. .. However, I'd like to ask you couple things about the MacBook battery...
    I know that now the battery has been improved, it leasts longer and it can support 1000 charging cycles.
    (Right now I'm performing the battery calibration)
    I'd like to know how can I use the battery and let it be perfectly healthy.
    For instance,
    1) If I connect the laptop to the MagSafe and let it charge, when should I remove the plug from the Mac and when should I put it in charge? I don't wanna continously waste cycles and let my battery die too soon (it's too young to die! :-D ) .. I use it mainly at home connected to the MagSafe: someone tell that even if you leave the MagSafe connected after the mac has been charged it stops charging (I can see this), and others say that is not a good thing to let the mac connected to the plug for a long time... with the old model I used to disconnect the battery from the mac so I didn't have these problems but with the new one it's a long procedure...
    2) I usually use to calibrate the battery once a month... Is it a good thing?
    Thanks!
    Andrea

    Everything you need to know about your battery is contained in this User Tip from frequent poster neuroanatomist:
    http://discussions.apple.com/thread.jspa?threadID=1764220

  • How can I improve the stability of itunes64bit 8.0.2 on my Vista system?

    Vista Home Premium: iTunes64bit: application crashes after adding album photos and then changing views (list, Album, split) or clicking on different playlists and back to the entire music library.
    The library has 42,000 items (mostly music) so it is quite large. At launch it takes a long time for itunes to load and display. There is no user cues telling me it is running. It simply displays after 60 or more seconds.
    Then I start working in the library, pasting pictures to multiple items, modifying album titles.
    After doing a few management tasks on my music items and navigating back and forth between the music library and playlist (changing views), the application stop being responsive and according to the log, the app just plainly crashes.
    Sometimes I can restart successfully but most of the times, I need to stop the itunes service or log-out before I can restart it successfully.
    I am using itunes64bit 8.0.2
    I am running it on a machine equipped with 4GB of ram and the library lives on a 500GB external hard drive plugged-in through USB 2.0.
    How can I improve the stability of itunes64bit on my system?
    Message was edited by: JF Boisvert

    This VI can be convert to labview 8.0 because subvi are not compatible with old version.
    I post a screenshot.
    Aurélien J.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> Du 30 juin au 25 août, embarquez pour 2 mois de vidéo-t'chat ! Prenez place pour un voyage au coe...
    Attachments:
    image.jpg ‏38 KB

  • How can I remove the battery from my Iphone and Ipads?

    How can I remove the battery from my iphone and ipad?

    The iPhone and iPad do not have user serviceable batteries. Battery replacement is handled by Apple. Make an appointment at the Genius Bar if battery replacement is required.

  • How can I flip my iphone videos on my PC? My videos from my iphone are horrible when I transfer them to my PC. How can I improve the video on my PC? Can I just convert the files to WMV? When the video plays the speed is off, it's half slow-motion

    My videos from my iphone are horrible when I transfer them to my PC. How can I improve the video on my PC? Can I just convert the files to WMV? When the video plays the speed is off, it's half slow-motion and staggers into normal play. The clips are slightly cut as well, the clips do not roll continuously.  I'm taling about videos that are no more than 2 minutes long.  I'm frustrated and I could really use some advice-my kids basketball games is what I'm recording and I'm trying to send them to my family (they are not very tech savvy). Thanks

    Not it's only function but one for which it was most admirably suited, which is why I really hope someone can find a work around. I am hoping my post to the Apple feedback may prompt a useful response from Apple and I live in hope that my post here will elicit a useful response from another user. I did not miss the the text at the top of the feedback form but you presumably missed my initial text, 'someone here can explain' or my subsequent 'work around from another user'
    Just in case anyone reading this has a large collection of music videos, video podcasts or iTunes U then DO NOT upgrade your iPad to iOS 5. If you are considering purchasing the iPad as a useful mobile device to experience these media organised in your iTunes please don't as you will be wasting your money. (unless someone on this forum knows of a way to undo the mess created by those infallible folks at Apple)
    Yes I know it does other things but the purpose I bought it for doesn't work anymore

  • How Can we improve the report performance..?

    Hi exports,
    I am learning the Business Objects XIR2, Please let me know How Can we improve the report performance..?
    Please give the answer in detailed way.

    First find out why your report is performing slowly. Then fix it.
    That sounds silly, but there's really no single-path process for improving report performance. You might find issues with the report. With the network. With the universe. With the database. With the database design. With the query definition. With report variables. With the ETL. Once you figure out where the problem is, then you start fixing it. Fixing one problem may very well reveal another. I spent two years working on a project where we touched every single aspect of reporting (from data collection through ETL and all the way to report delivery) at some point or another.
    I feel like your question is a bit broad (meaning too generic) to address as you have phrased it. Even some of the suggestions already given...
    Array fetch size - this determines the number of rows fetched at a single pass. You really don't need to modify this unless your network is giving issues. I have seen folks suggest setting this to one (which results in a lot of network requests) or 500 (which results in fewer requests but they're much MUCH larger). Does either improve performance? They might, or they might make it worse. Without understanding how your network traffic is managed it's hard to say.
    Shortcut joins? Sure, they can help, as long as they are appropriate. [Many times they are not.|http://www.dagira.com/2010/05/27/everything-about-shortcut-joins/]
    And I could go on and on. The bottom line is that performance tuning doesn't typically fall into a "cookie cutter" approach. It would be better to have a specific question.

  • I once has the percentage of battery life on my iphone 4s but i restored it and now it doesnt have it, how do i get it back?

    i once has the percentage of battery life on my iphone 4s but i restored it and now it doesnt have it, how do i get it back?

    I'd check under settings/general/usage and see if battery % is on

Maybe you are looking for

  • Hp Photosmart printer stopped working

    Ok this has now happend to me a couple of times with HP printers on my Imac - thought it was a printer issue first but there is something i cant work out I have bought a wireless HP Photosmart Plus printer B210 - for about one month I had no issues w

  • How can I REPLACE original RAW files with JPG's and keep my 'Develop mode' edits?

    An image describing my problem: http://i.imgur.com/hcqMYkv.jpg (Lightroom 5) 'edits' = Edits made in develop mode. 'CR2' = My RAW image file format. I have existing CR2's with edits for them saved in Lightroom. I want to replace the CR2's with JPG's,

  • Compressor to Encore, Why is it Transcoding?

    So I found this video on YouTube: http://www.youtube.com/watch?v=CbPty1t2I-g&list=FLVM5L7VYQR2lOqf3xxaQpkg&index=4&feature=p lpp_video I follow the directions exactly, import the assett into Encore and it still wants to Transcode. I wasted my entire

  • How do you switch out PMS colors in CS5

    I am trying to swap out PMS colors in a complicated Illustrator file--my client just changed all the colors. I remember being able to double click the color swatch and the list of Pantone colors would come up--and you could just select a new one--may

  • CU2 Update with SCUP

    Hi All We have an environment of a CAS and a Primary site and approximately 15.000 Windows 7 computers We implemented 3 months ago SCUP for the updates of Adobe everything works perfectly. We have upgraded our servers to SCCM 2012 R2 CU2. We now want