How can I include controlfile in FRA without recreating it?

Hi everyone,
We have a DB Oracle 10.2.0.3.0 with our controlfiles outside the FRA. Is there any way to multiplex the contolfile, and put one copy of it inside the FRA without recreating it? I can change the spfile and include the path of a copy of the controlfile inside the FRA, but I still see "NO" in v$controlfile.IS_RECOVERY_DEST_FILE.
Any clue?
Thanks.

>
We have a DB Oracle 10.2.0.3.0 with our controlfiles outside the FRA. Is there any way to multiplex the contolfile, and put one copy of it inside the FRA without recreating it? I can change the spfile and include the path of a copy of the controlfile inside the FRA, but I still see "NO" in v$controlfile.IS_RECOVERY_DEST_FILE.
>
So you did already mirror the controlfile into the FRA diskgroup, but only worry about the column entry NO in IS_RECOVERY_DEST_FILE? In fact, that will only change to YES if you create the controlfile new, using DB_CREATE_FILE_DEST and DB_RECOVERY_FILE_DEST pointing to database area diskgroup and recovery area diskgroup. But why worry about that entry? If you actually mirrored your controlfile to the FRA diskgroup (checked by a select on v$controlfile), you're fine :-)
Kind regards
Uwe
http://uhesse.wordpress.com

Similar Messages

How can I include different DAQ cards (for notebook and PC) in one application?

I want to build one application, which runs on different computers. On PC a DAQ board PCI-6052E and LabVIEW including application builder are installed and work. My program runs.
Now I want to build an application, which runs on the notebook without LabVIEW but with the similar DQACard-AI-16XE-50, too.
How I have to install the DAQCard on the notebook and how can I include the driver?

Sylke,
Check the following link which guides you step by step to install the driver and configure the daq board:
http://www.ni.com/support/install/
Hope this information is helpful.
L Aguila
Applications Engineer
National Instruments

How can I include results of a subsequence, which runs in a new thread, in the main sequence test report

Hi!
I', m working with TestStand Version 4.2.1. I have a main sequence, which calkls different subsequences. All these steps are properly reported. One of subsequences runs as "new thread". How can I include its results in common test report of the main sequence?
I have markes variables of the subsequence as it is requred for test report (it works OK if it is not a new thread). If the the numerical test, which is executed in this subsequence is correct, I get no results at all. If the numeric test failed I get somewhere in the main sequence report a "red message", that test failed whithout any reference to the step or values of vaiables which were not correct.
I tried an option "On the fly" in the Report Configuration , but haven' got any useful results. What shall I do?
Best regards
Solved!
Go to Solution.

Hi,
I tried it but without success:
1) I got a reference to the Thread as "Locals.Step1=RunState.Thread" for every of 2 steps which start a thread
2) I put both "Waits" after steps with (and without) threads, at the same place, where they were before
3) The sequence run OK, but when it came to Wait for Thread 1 it waited for ever, I had to terminate sequence
Does it mean, that I got a false reference (suppose No - please, have a look at attached pic)?
Or does it mean, that Waits are badly placed in the sequence (threads are already terminated)? Here is a pic of sequeces calls with Wait after them.
Regards
Attachments:
Thread.JPG ‏34 KB
SequenceCall.JPG ‏32 KB

How can i include Services and Bindung in a generated WSDL file?

Hi,
i what to use a generated wsdl file from an erp system, to build a web service client with WSDL2Java (org.apache.axis.wsdl.WSDL2Java).
I noticed, that services an bindings are missing, also a policy is included.
How can i include services and bindings in the wsdl and exclude the policy?
Thanks!

well, I assume you have SOAMANAGER.
choose your service & "Apply Selection" (very useless button btw)
select a binding in the dropdown box or create on if you do not have one yet
Click button "Show WSDL options" (actually they do not really look like buttons in WD; call it yellow blot)
Some extra config area is thrown onto your screen (without any sense for usability or design); Change the radio button for WSDL format from "WS policy" to "Standard"; make sure the first radio button group is on "True" for monolithic
Now click the link (why is this a link and no blot?) called "Display selected bindings WSDL URL"
an extra text field is again thrown onto your screen somwhere between the dropdown and the WSDL option config area containing an URL (get out your glasses if you don't see the sub-10pt-letters)
hope it helps,
anton

How can I include text lines in Service Invoice?

Dear Experts,
I realized unlike Item Invoice, Service Invoice does not have the "Type" column for me to include Text into the document?
How can I include a free text into 1 row of the Service Invoice? without any GL Account, Qty and Total input?
Thanks!
Warmest Regards,
Chinho

Hi Chinho,
Try to use the Description(100 characters) Field
but if you want to add more characters at row level in single field.
Try to add a UDF(500 Characters) on Marketing Documents.
Regards,
Madhan.

How can I include local fonts in my finished edge reflow website?

How can I include local fonts in my finished edge reflow website?
The website has to run without internet connection and the use of webfonts. I have already tried to to include fonts manually but this wasn't working.

I would like this too, as it would save a lot of time using icons in the form of icon fonts.

How can I reinstall Safari 8.0 without disturbing anything else?

How can I reinstall Safari 8.0 without disturbing anything else? I have OS X 10.10.1 Yosemite & Safari 8.0 (that comes in it) installed on a MacBook Pro laptop and a Mac Mini tabletop computer. I want to access internet banking which goes without problems on the laptop but does not work on the tabletop. The latter says "somebody tried to display the application in a frame..." whatever that means and obviously for safety reasons I can not start banking it always comes back to the screen with this warning. I tried Mozilla FireFox on the tabletop Mini and everything works fine including the banking. A Mac expert suggested something is wrong with the Safari settings and I should reinstall it. How do I do this without reinstalling the System? Would it suffice to wipe out the Safari Preferences and start anew? I am looking for somebody's advice more experienced than I am. Thanks!
Andy

Hello isza41,
Before you try to do any uninstall/install stuff let me suggest you something:
Create a new user and check if the same happens within its account. You could do so by going trough the following steps:
Choose Apple menu > System Preferences, then click Users & Groups.
Click the lock icon to unlock it, then enter an administrator name and password.
Click Add below the list of users.
Click the New Account pop-up menu, then choose a type of user. - Standard user account would be perfect here.
Enter a full name for the new user. An account name is generated automatically. To use a different account name, enter it now—you can’t change it later.
Enter a password for the user, then enter it again to verify. Using a password hint is recommended to help the user remember his or her password.
Click Create User.
Now Logout from your account (⌘⇧Q) and Login to the one you have just created. This account is fresh without any changed settings(as a new instance would look like).
Check if the same would happen and you would see if this is an issue with your installation or something more general.

In chrome I'm getting green double underline hyperlinks to ads. How can I get rid of this without adding more junk to the computer?

I have both safari and chrome, because I'm used to chrome. The only extension I have is Google docs. I started getting green double underline hyperlinks to ads. How can I get rid of this without adding more junk to the computer? People suggest programs to do it, but how do I know they won't make it worse?
Is someone from Apple here and can answer?
Thanks!

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

I deleted a pop email account from mail. How can I recover those sent messages without Time Machine?

I deleted a pop email account from mail. How can I recover those sent messages without Time Machine?

Thomas,
"Note that you were warned that this would happen and approved it. When you delete an e-mail account in Mail, you are shown a message like the following:"
You didn't read my problem - I said I deleted a POP email account. I always read the messages that pop up and in Mail when you delete a POP account - IT DOESN'T TELL YOU NUTHIN! It just deletes it - which *** for me. Fortunately, I had an iPhone and on that device I had about a 1000 messages that I could recover but on all my POP accounts I download them from the server onto my Mac so they were only on Mail (the really old ones that I wanted to keep.) I had to move them into another directory one by one basically because when I would move 50 some of them would move and some wouldn't and I never did figure out that problem. Basically the ones that would not move are the ones that were associated with my domain changes with GoDaddy, and there were a lot of those. Have no idea as to why only those were resistant to moving but I can get all that data from GoDaddy anyway.
This thread is now moot seeing as how I've recovered everything I can and am going to just move on - and back up more often. ;-)
Apple and Mail need to rewrite that program to include a WARNING MESSAGE when deleting an Account in Mail that says ALL YOUR MESSAGES ARE GOING TO DISAPPEAR NEVER TO RETURN IF YOU DELETE THIS ACCOUNT, SO YOU DANG WELL BETTER HAVE A BACK UP IF YOU WANT TO KEEP ANYTHING BEFORE PRESSING THAT MINUS SYMBOL! ;-)

HT4061 how can i find my imei number without the phone

how can i find my imei number without my phone but got the origional number

iTunes on you computer saves this information.
Open iTunes.
Open Preferences. (In Mac OS X, choose iTunes > Preferences. In Windows, choose Edit > Preferences.)
Click the Devices tab.
Position the mouse arrow over the iPhone name to display the numbers including IMEI of the backed-up device.

HT4910 How can I increase my storage space without using a debit/credit card?

HOw can I increase my iCloud storage without a credit/debit card!!

Payment methods accepted include iTunes store credit, credit cards, and debit cards. If you do not have enough iTunes store credit to complete your upgrade, you will be charged the remaining amount.
Purchasing iCloud storage and billing:
http://support.apple.com/kb/HT4874

I've been trying to make an account with iTunes n everytime I get to the part of the credit card that's as far as I get because I dnt have one, how can I make an iTunes account without a credit card??

I've been trying to make an account with iTunes n everytime I get to the part of the credit card that's as far as I get because I dnt have one, how can I make an iTunes account without a credit card??

Where are you located?
Just go and buy an iTunes gift card at any store in your country.
Then follow all the steps you did, but when it asks you for the credit card number, there shoujld be a GIFT CARD option which will let you load your account witht eh funds form the gift card without providing a credit/debit card #.

How can I reset my lock passcode without plugging it into the computer or restoring it or resetting any data?

I went I to my phone and I tried to unlock my passcode but it did not let me in, how can I reset my lock passcode without plugging it onto the computer on iTunes, or restoring it or deleting any data ?

You don't. The only way to remove the passcode if forgotten is to restore the device. If you have a backup, you can restore to that last backup, but anything done since that last backup would be lost.Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

How can I use a new computer without deleting everything on iPod?

Hey Guys
I need a bit of help.
My old computer died, it was running Windows XP. I've got myself a new computer running Windows 7.
I have a copy of my iTunes folders from my old computer (taken 2 days before it died)
How can I use a new computer without deleting everything on iPod touch?
I've imported all the folders (music, apps etc) into the new computer's iTunes, but when I sync my iPod
I receive a window asking if i want to sync i need to erase and replace with the iTunes library on the computer.
I particularly don't want to do this.
My wife also uses my iTunes for her iPhone.
Any help would be appreciated. Thank you

Make a backup of the iPod by connecting the iPod to the computer and right clicking on the iPod under Devices in iTunes and selecting Backup. Then restore the iPod from that backup and sync as necessary.

How can I manage six email accounts WITHOUT them all appearing (twice) in the Folders column?

How can I manage six email accounts WITHOUT them all appearing (twice) in the Folders column?
All I need is ONE INBOX (like Windows Mail used to do) ...
I can see in the 'Account' column of each message which email account it's using.
Then, I either junk or read the message, followed by delete or file to one of my created folders.
As it is, half my page is depth is taken up by 12 lines of Account names !!!

That still leaves SIX lines of Account names down the side. All I want is ONE INBOX ... (I can see which account each message belongs to in the 'Account' column...)

How can I include controlfile in FRA without recreating it?

Similar Messages

Maybe you are looking for