How can I initialize a component controller?

Hello,
is it possible to initialize the component controller?
If yes, how can I do this?
best regards,
Josi

Here are the background infos:
I created a WD Component, that uses the standard SAP component (model) RPLM_QIMT_NOTIF_MODEL as a component use, to create, change and display malfunction notifications. It was necessary to create a new WD Component, because the costumer wanted a lot of layout changes and editional check functions and so on...
The standard functionality is that after the saving the view changes in display mode and the create notification is displayed.
But the customer want that after the saving the screen is refresh, so that it will be possible to create a new notification, without clicking again on the navigation link "create notification" in the portal...
When I initialize the context, then all (to much) data is deleted, because in the standard some fields must be filled, otherwise the Component model RPLM_QIMT_NOTIF_MODEL works not correct.
Inside the model i found the methode INITIALIZE -> but it does not work as I expected.
So I want to "summulate" that the component is called as at the first time when navigate to "creation of notification" via portal link. So I thought I could "initialize" the comp. controller, then the references the Model and the API of the model are deleted / refreshed.
Has someone an idee?

Similar Messages

How to work with the component controller.

I Created a Z component.
In that component controller i ceated a context node by using value node with BUT000 with the attribute NAME_ORG1.
I created a view in the same component.
In the view i created a Context Node BUT000 wiht NAME_ORG1.
I bind this view context node with compnent controller context node.
I want set the value from the view context node to component controller context node. How it is possible?
I created another Z component.
I created compoent controller like same context node above.
I created the view also.
I want display the first compoent controller data in the second component controller.
How it is possible.
For one component to another component we can pass the data based on component controller only?
Please give me how i can set/display the component controller context node with the data?
Thank You.
Regards,
B. Krishna.

Hi Manish.
    Thank you for reply Manish. I need some more information.
I created ZCOMP1 with view V1 and ZCOMP2 with view V2.
In both component controllers I created Context node by usng NAME_ORG1 of BUT000.
I provide the Navigation link from ZCOMP1 to ZCOMP2 as well as ZCOMP2 to ZCOMP1.
In Run Time Repository I provied two components as a INTERFACE VIEWS and
I provide ZCOMP2 as component Usage in ZCOMP1 as well as ZCOMP1 as a Component Usage in ZCOMP2.
Now, what ever data I entered in ZCOMP1 like NAME_ORG1 is "HELLO" then
This infomation I want display in ZCOMP2 - V2.
In ZCOMP2 method wd_usage_initialize
I write like this.
IF IV_USAGE->USAGE_NAME = 'CompUsage'.
    iv_usage->bind_context_node( iv_controller_type = cl_bsp_wd_controller=>co_type_component
                                   iv_target_node_name = 'BUT000'
                                   iv_node_2_bind      = 'BUT000' ).
ENDIF.
But it is displaying the Exception like this
Cannot display view ZCOMP2/MainWindow of UI Component ZCOMP2
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - The view controller or custom controller "" was implemented incorrectly
Method: CL_BSP_WD_COMPONENT_USAGE=>IF_BSP_WD_COMPONENT_USAGE~BIND_CONTEXT_NODE
Source Text Row: 24
Please tell me how to solve this Problem.
Regards,
B. Krishna.

How can I use EJB component on Weblogic 8.1 server ?

hi,dear sir:
How can I use EJB component on Weblogic 8.1 server ?
It need client jar to invoke ejb,but what will I to do for this jar file? what does it contain? format ?
If my EJB module contain 100 session bean and 50 Entity bean,but I want invoke 20 session beans in my module, how can I to do?
thank you...

Hi,
This forum is exclusively for Creator. please post this on appropriate forum
regards
CreatorTeam

How can I boot my PXI controller into real-time without a floppy disk?

My PXI controller is in a lab which has intense magnetic fields that could corrupt the floppy disk used to boot the PXI controller into the LabVIEW Real-Time (RT) Operating System. How can I boot the PXI controller into real-time directly from the hard drive?

If you are using LabVIEW 5.1.2 Real-Time (RT), launch Remote System Explorer and select Disks >> Create Format Hard Drive Disk. If you have LabVIEW 6 RT, launch the Measurement and Automation Explorer (MAX) and select Tools >> RT PXI Disk Utilities >> Create Format Hard Drive Disk (LabVIEW RT 6 has not be released yet). Once you have created the disk, boot the PXI controller with the Format Hard Drive Disk, and this will format the PXI's hard drive and install the real-time OS boot loader. Now you can reboot the PXI without a floppy disk and configure the PXI using Remote System Explorer or MAX. Be aware that this will remove all information from the hard drive, including other operating systems.

How can I get the component LTC1060 in the multisim 10 library ?

How can I get the component LTC1060 in the multisim 10 library ?

ahnsei ,
This is a switched capacitor filter - with a variety of configurations for each mode of operation based on the switching frequency. To create a transistor level SPICE model would be unrealistic (which is probably why you haven't found one), so I would suggest looking at the datasheet and specifically, looking at each mode of operation and seeing if you can approximate the filter topology with an expression for the transfer function given in the datasheet (by calcuting based on the switching frequency).
Based on the expression you get, you can use the Multisim component "TRANSFER_FUNCTION_BLOCK" to plug in the correct transfer function and thus approximate the behavior of the filter in the circuit.
This transfer function can be found in the Master database -> Sources -> CONTROL_FUNCTION_BLOCKS. There was a previous discussion giving some additional details on how to setup the transfer function block:
http://forums.ni.com/ni/board/message?board.id=370&thread.id=3987
Regards,
Patrick Noonan
Business Development Manager
National Instruments - Electronics Workbench Group
50 Market St. 1-A
S. Portland, ME 04106
Email: [email protected]
Tel. (207) 892-9130
Fax. (207) 892-9508

How can I create the component like ComboBox in flashlite2.0 ?

How can I create the component like ComboBox in flashlite2.0
I'm a new man, please gave me an example!
Thanks.

I don't see anything special about the play button in MPMoviePlayerController....
the "glowing" effect icons are all standard UIBarButtonItem objects:
http://developer.apple.com/iphone/library/documentation/UIKit/Reference/UIBarBut tonItem_Class/Reference/Reference.html

How can i delete software component in the IR

How can i delete software component in IR,when there are too many SCs?

If you have to delete a SWCV, you have to delete all the namespaces with in that first. Open a name space and delete all the user defined objects in that first. Then delete the Std Fault and log data types and delete it and remove the name space from the SWCV by opening the SWCV and using - button on the name space. Now activate the changes. This will delete the name space.
Repeat the step for all the name space with in the SWCV. After all objects are deleted. Open the SWCV and use the menu, SWCV ->Delete object.
Regards,
Jai Shanakr

How can i initialize variables and append variable in bpelx:exec

I want to know how to initialize variables in bpelx:exec.
I try to use java embedded activities for dynamic sql query. But I meet some problems that cannot assign the data to tempVariable. because I don't initialize tempVariable. but I can't initial variables in java embedded actitvities. How can i initialize variables in bpelx:exec ?
and I want to know to extend child Elment of tempVariables dynamically in bpelx:exec ?
here is my source.
<bpelx:exec name="callEmpDB" language="java" version="1.5">
<![CDATA[
String url = "jdbc:oracle:thin:@127.0.0.1:1521:wonchoi";
String user = "scott";
String passwd = "tiger";
int index = 1;
Connection conn = null;
Statement stmt = null;
ResultSet rs = null;
Node node = null;
try{
conn = DriverManager.getConnection (url, user, passwd);
stmt = conn.createStatement();
String wherescript = "";
Element empno = (Element)getVariableData("inputVariable","payload", "/client:selConnectDBProcessRequest/client:empno");
Element ename = (Element)getVariableData("inputVariable","payload", "/client:selConnectDBProcessRequest/client:ename");
Element job = (Element)getVariableData("inputVariable","payload", "/client:selConnectDBProcessRequest/client:job");
Element deptno = (Element)getVariableData("inputVariable","payload", "/client:selConnectDBProcessRequest/client:deptno");
String sql = "select empno, ename, job, mgr, hiredate, sal, comm, deptno from emp where 1 = 1 ";
if(empno != null && empno.getTextContent() != null && !empno.getTextContent().equals("") )
wherescript = wherescript + " and empno = " + empno.getTextContent() ;
if(ename != null && ename.getTextContent() != null && !ename.getTextContent().equals("") )
wherescript = wherescript + " and ename like '" + ename.getTextContent() +"' " ;
if(job != null && job.getTextContent() != null && !job.getTextContent().equals("") )
wherescript = wherescript + " and job = '" + job.getTextContent() +"' ";
if(deptno != null && deptno.getTextContent() != null && !deptno.getTextContent().equals("") )
wherescript = wherescript + " and deptno = " + deptno.getTextContent() ;
sql = sql + wherescript;
System.out.println("sql : "+sql);
rs = stmt.executeQuery(sql) ;
while (rs.next())
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:EMPNO", rs.getString("empno"));
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:ENAME", rs.getString("ename"));
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:JOB", rs.getString("job"));
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:MGR", (rs.getString("mgr")==null? "": rs.getString("mgr")));
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:HIREDATE", rs.getString("hiredate"));
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:SAL", rs.getString("sal"));
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:COMM", rs.getString("comm"));
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:DEPTNO", rs.getString("deptno"));
index++;
}catch(SQLException sex){
System.out.println("sql error");
}catch(Exception ex){
System.out.println("error");
}finally{
try{
rs.close();
stmt.close();
conn.close();
}catch(Exception ex){}
}]]>
</bpelx:exec>
and here is tempVariable examples and schema.
<tempVariable>
     <part name="payload">
          <selEmpOutputCollection>
               <selEmpOutput>
               <EMPNO/>
               <ENAME/>
               <JOB/>
               <MGR/>
               <HIREDATE/>
               <SAL/>
               <COMM/>
               <DEPTNO/>
          </selEmpOutput>
          <selEmpOutputCollection>
     </part>
</tempVariable>
<xsd:element name="selEmpOutputCollection" type="selEmpOutputCollection"/>
<xsd:element name="selEmpOutput" type="selEmpOutput"/>
<xsd:complexType name="selEmpOutputCollection">
<xsd:sequence>
<xsd:element name="selEmpOutput" type="selEmpOutput" minOccurs="0" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="selEmpOutput">
<xsd:sequence>
<xsd:element name="EMPNO" type="xsd:decimal" nillable="true"/>
<xsd:element name="ENAME" type="xsd:string" nillable="true"/>
<xsd:element name="JOB" type="xsd:string" nillable="true"/>
<xsd:element name="MGR" type="xsd:decimal" nillable="true"/>
<xsd:element name="HIREDATE" type="xsd:dateTime" nillable="true"/>
<xsd:element name="SAL" type="xsd:decimal" nillable="true"/>
<xsd:element name="COMM" type="xsd:decimal" nillable="true"/>
<xsd:element name="DEPTNO" type="xsd:decimal" nillable="true"/>
</xsd:sequence>
</xsd:complexType>
thanks

My bpel project flow is as follows.
First, I initalize the temp varialbe like this.
<assign name="setInitialVar">
<copy>
<from>
<ns1:selEmpOutput xmlns:ns1="http://lgesoa.lge.com/EmpSpec/types">
<ns1:EMPNO/>
<ns1:ENAME/>
<ns1:JOB/>
<ns1:MGR/>
<ns1:HIREDATE/>
<ns1:SAL/>
<ns1:COMM/>
<ns1:DEPTNO/>
</ns1:selEmpOutput>
</from>
<to variable="tempVariable" part="payload"
query="/ns1:selEmpOutputCollection/ns1:selEmpOutput"/>
</copy>
</assign>
Second, get Data(ex. 10 Employee Information List) from DB for useing Java embedded activity.
Third, assing employee info to tempVariable, then BPEL assign just only one Employee Information. and next data can't assign and the BPEL make an error.
here is my error message..
<2007-03-02 11:23:26,125> <ERROR> <default.collaxa.cube.engine> <BPELXExecLet::setVariableData>
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
messageType: {null}
parts: {{summary=oracle.xml.parser.v2.XMLElement@15f80b}}
     at com.collaxa.cube.xml.dom.DOMUtil.copy(DOMUtil.java:536)
     at com.collaxa.cube.engine.ext.BPELXExecLet.setVariableData(BPELXExecLet.java:721)
     at com.collaxa.cube.engine.ext.BPELXExecLet.setVariableData(BPELXExecLet.java:700)
     at bpel.selconnectdb.ExecLetBxExe4.execute(ExecLetBxExe4.java:160)
     at com.collaxa.cube.engine.ext.wmp.BPELXExecWMP.__executeStatements(BPELXExecWMP.java:49)
     at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:195)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3271)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1697)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:184)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:269)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5244)
     at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1083)
     at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.createAndInvoke(CubeEngineBean.java:132)
     at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.syncCreateAndInvoke(CubeEngineBean.java:161)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
I analyzed the problem. and I find the reason that is I just assing one XML flag to the temp variable. If i don't initalize the varaible like first step, BPEL make an error above error message.
thanks
Won.

I have Point, how can I get the component of this Point?

Hi, everybody!
Can U help me!
I have 10 block in 1 applet. After 1 even, I kept the Point of the block, just made even. I want remove the block, which have the point. Then I use method getComponentAt() but I can't.
Anyone tell me the way to process.
Agains, I have the Point, how can I get the component of this Point?
Thanks so much!

That makes no difference, as you can still use this method with AWT.
// parent is you main Frame or Dialog window.
Component parent;
// target is the AWT component that the user has clicked on.
Component target;
// "e" is is your click event.
MouseEvent e;
target = SwingUtilities.getDeepestComponentAt(parent, e.getX(), e.getY());

From an ItemRenderer, how can i reach the component that the Itemrenderer is applied on

Hello.
I have a component that uses a skin that uses several different item renderers.
in each item renderer i want to set a different background color according to a public variable that
the component that i apply the item render on has.
how can i reach that component from the ItemRenderer?
thanks!

Usually outerDocument or parentDocument.

How can i initialize a button (Switch when pressed) to be always disabled when i start the programm.

Hello
How can i initialize a button (Switch when pressed) to be always disabled when i start the programm. My problem is that the state of the button is always the state in which it finihed last time.
Thanks
Lukas

A button is either true or false. "Disabled" is a property that determines if the button can be operated or not.
It seems from the rest of your question that you actually want to ensure that it is set to false, but remain enabled. This is easiest done with a local variable as already mentioned by becktho.
If you want to disable the button, use a property node.
LabVIEW Champion . Do more with less code and in less time .

How can i get a component from frame?

how can i get a JTextField component from the frame?
in my program i use button and text fields, when button is pressed the action listener performs the needed actions: it must take the values in the text fields and do something with them,
for example i have a button - view:
look at the comments
public class _ActionListener_search implements ActionListener {
     private JFrame frame;
     private database dtbs;
     public _ActionListener_search(JFrame frame, database dtbs) {
          this.frame = frame;
          this.dtbs = dtbs;
     @Override
     public void actionPerformed(ActionEvent arg0) {
          if (arg0.getActionCommand().equals("view_person"))
                                        //HERE i want to get values from text fields!
                                        //i need to get JTextField component from frame and use it
view.addActionListener(new _ActionListener_search(frame, dtbs));how can i do it?
is this a correct way?

Encephalopathic wrote:
If you know that you're going to need the data held in them why not give the class that holds them a public method that returns the Strings that they hold.
public String getTextFieldXyzText()
return textFieldXyz.getText();
}Then if your actionlistener has a reference to this class's object, it can simply call the above method.That's what I was thinking. The view has a method getXyzText() and the listener (or some larger, enclosing controller) knows the view.
What I would get away from is a single, switch-board listener hooked to a 100 unrelated buttons.

How can i display the MRP controller in transfer order print?

Dear all:
   When i print the transfer order(Tcode: LT31) ,i want to display the MRP controller in the output form.
How can i get that ?
I found the user exit MWMD0001 and add the code in the include like this:
   select single dispo from marc
     where matnr = ltap-matnr
           and werks = ltap-werks.
     zdispo = marc-dispo.
But caz the "zdispo" could not been brought to the "print form " of the report RLVSDR40 which control the print LT31.So ,i failed.
Anyone advice?

The problem is as zdispo is declared in your user exit it doesn't become available. Had it been declared variable in the include of the program for LT31 you would be able to use it directly in the script.
Try doing this instead in your layout set.
/: PERFORM MRP_CONTROLLER IN PROGRAM ZABCXYZ
/: USING &LTAP-MATNR&
/: USING &LTAP-WERKS&
/: CHANGING &ZDISPO&
/: ENDPERFORM
in your program ZABCXYZ.
FORM MRP_CONTROLLER tables in_par structure itcsy
                           out_par structure itcsy.
tables: marc.
data: matnr like marc-matnr.
data: werks like marc-werks.
READ TABLE IN_PAR WITH KEY LTAP-MATNR.
CHECK SY-SUBRC = 0.
MATNR = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY LTAP-WERKS.
CHECK SY-SUBRC = 0.
WERKS = IN_PAR-VALUE.
select single dispo from marc
where matnr = ltap-matnr
and werks = ltap-werks.
IF SY-SUBRC = 0.
READ TABLE OUT_PAR WITH KEY ZDISPO.
CHECK SY-SUBRC = 0.
OUT_PAR-VALUE = MARC-DISPO.
ELSE.
CLEAR OUT_PAR-VALUE.
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
This should work.

How can i use a component twice in the same movie clip

Excuse me am a beginner in this as2
below is the script used:
PeelIt is a component.
/////////////////////////////////////////////////1st frame contains the below:
PeelIt._visible = false;
PeelIt.init();
PeelIt.Peel();
///////////////////////////////////////////////// then on 2 different buttons:
on (release){
    this._parent.PeelIt._visible = true;
    this._parent.PeelIt.Stick();
and
on (release){
    this._parent.PeelIt.Peel();
1st problem: i need this component to work when the swf loads instead of (on release),
2nd problem: i need to introduce several frames with different movieclips using the component, how can i do so.
thank you

use:
PeelIt.init();
PeelIt.Peel();PeelIt._visible = true;
PeelIt.Stick();
PeelIt.Peel();
and just add the component to each movieclip.

How to call Custom or Component Controller methods from View Controller

Hy Guys,
how do I call Custom Controller or Component controller methods from a View or Context Controlller?
thanks in advance
Jürgen

Hi Juergen
Yes it is possible, pls follow the below approach to access the component controller in context node class
1) since the standard component controller class is protect variable , declare a variable of type component controller in your controller class.
say for example the public variable you declared is g_comp_controller
2) now redefine the controller class method WD_CREATE_CONTEXT and add the below lines of code
   g_comp_controller ?= me->comp_controller.
3) go to context node class (CNXX) there declare the varaible which of type controller class (IMPL) as public variable, for example g_owner
4) redefine the method IF_BSP_MODEL~INIT and write the below code
     CALL METHOD super->if_bsp_model~init
    EXPORTING
      id    = id
      owner = owner.
g_owner ?= owner.
5) now the variable   g_owner that is declared in (CNXX)   contains reference to your controller class
6) in on_new_focus method access your component controller in the below manner and access the entities also.
DATA: lv_owner                    TYPE REF TO xxxxx_impl, " Implementation class
             lr_comp_cont                TYPE REF TO xxxx_bspwdcomponen_impl, " component controller class
             lv_entity type ref to cl_crm_bol_entity.
lv_owner ?= g_owner.
lr_comp_cont    ?= lv_owner->g_comp_controller.
IF lr_comp_cont IS BOUND.
   lv_entity ?= lr_comp_cont->typed_context->mdfcampaign->collection_wrapper->get_current( ).
now lv_entity contains the value of component controller context node.
Thanks & Regards
Raj
Edited by: bmsraj on Sep 27, 2011 3:28 PM

How can I initialize a component controller?

Similar Messages

Maybe you are looking for