From an ItemRenderer, how can i reach the component that the Itemrenderer is applied on

Hello.
I have a component that uses a skin that uses several different item renderers.
in each item renderer i want to set a different background color according to a public variable that
the component that i apply the item render on has.
how can i reach that component from the ItemRenderer?
thanks!

Usually outerDocument or parentDocument.

Similar Messages

My old iPad 2 is updated to ios 7.1.2 but I have a new 4 which is only compatible with 7.0.4 from setup. How can I backup my account to the new iPad with this incompatibility?

My old iPad 2 is updated to ios 7.1.2 but I have a new 4 which is only compatible with 7.0.4 from setup. How can I backup my account to the new iPad with this incompatibility?

What you need to do is temporarily set up your new 4. Just long enough to update the operating system. Then you can erase all content and settings - which puts it back to its out of box state, then set it up again, this time restoring it from the backup of your two.
So, using the same Apple ID on both - just to keep things easy - set up your 4. Just basically choose 'set up as new' to activate it, then immediately update the iOS to 7.1.2.
then erase all content and settings, which puts it back to 'llike new'...but the operating system will not reset, it'll remain 7.1.2
Then set it up again, this time choosing to 'restore from the backup' of your 2 and your 4 will be a near clone of your two.

I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

How are you trying to transfer it and what are your setting on iTunes. I'm not on a computer that has iTunes at the moment so I'm going from memory and similar issue. If iTunes is set to sync music then I don't think you can select and drag, if set to manual manage music then you can. Also make sure you are dragging to music on the iPhone.
Hope this helps

I'm new to Photoshop Elements and just getting started. While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon. How can I remove this so that the photos will be restored to normal?

I'm new to Photoshop Elements and just getting started. While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon. How can I remove this so that the photos will be restored to normal?

Go back to the editor and close the photo there.

All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"?

All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"? My Lightroom release is 5.7.1.
Thanking you in anticipation!

I'd like to get all these '-1 suffix' files together with their associated Develop adjustments into one folder (if they aren't already) so I can see them in Grid view in the Library module, which I use as my basic starting point for everything else at this early stage of my Lightroom 'career'.
To see what folder these are stored in, right-click on a photo and select "Go to Folder in Library".
Advice: if you are going to use Lightroom effectively, you probably want to stop using folders as your method to create a grouping of photos that are already in Lightroom; there are plenty of built-in tools, such as keywords, collections, color labels, etc.
I don't understand why the search on the entire catalog picked up apparently the same two file versions but also got the Develop adjustments when going to the relevant Folder didn't show the adjustment black squares against each image in Grid view nor were they there when the images were opened in the Develop module. Perhaps if I understood this, I'd be a bit more confident of moving forward myself.
These are most likely different versions of the same photo, in different folders. Lightroom stores the edits in its own catalog, and so it knows that one folder's photos have edits, and the other folder's photos do not have edits. Please understand that Lightroom is a database, it knows where the photos are at the time you import them (or add them to the catalog by synchronize), and then if you move things around in your operating system, Lightroom does not know anything about that and problems begin. Thus the advice to organize using Lightroom tools and methods and not operating system tools and methods.

HT2486 When you want to add another person from same company, how can you duplicate and then modify the card already entered?

When usinf Mac Address Book and you have entered the information for one contact from a company, how can you duplicate the card so you can add another person from same company?

I'm afraid the LU suffix is a new one on me.
As long as you have all of the content in your library then that remove and sync warning shouldn't cause any loss of data, but it shouldn't be happening every time. It may pay to take the following steps to reset the connection between the two,
Backup device.
Restore as a new device.
Restore the backup made earlier.
Again, this assumes all content on the device is in your library. If that isn't the case see Recover your iTunes library from your iPod or iOS device first.
tt2

How can i delete software component in the IR

How can i delete software component in IR,when there are too many SCs?

If you have to delete a SWCV, you have to delete all the namespaces with in that first. Open a name space and delete all the user defined objects in that first. Then delete the Std Fault and log data types and delete it and remove the name space from the SWCV by opening the SWCV and using - button on the name space. Now activate the changes. This will delete the name space.
Repeat the step for all the name space with in the SWCV. After all objects are deleted. Open the SWCV and use the menu, SWCV ->Delete object.
Regards,
Jai Shanakr

How can I reset a device that the previous owner refuses to unlock?

I WORK FOR A COMPANY THAT SEIZES PROPERTY COLLECTED FROM BEING ON LEIN. WE HOLD THE PROPERTY AND IF THE COLLATERAL ISN'T PAID FOR OR NEGOTIATED TO STANDARDS, IT'S HELD FOR 30 DAYS (WE USUALLY HOLD UP TO 90 DAYS IN MOST CASES) AND THEN THAT PROPERTY BECOMES THE OWNER OF THE LEIN COMPANY TO DO OR SELL TO RECOVER COSTS RELATED TO COLLATERAL DEBT.
THAT ALL BEING SAID... THAT IS WHY MY QUESTION IS, HOW WOULD THE NEW OWNER OF ANY APPLE DEVICE IPAD, IPOD, IPHONE ETC....BE ABLE TO GAIN ACCESS TO A DEVICE IF THE PREVIOUS OWNER IS NOT AVAILABLE TO RESET OR ASK FOR ICLOUD INFO??
IS THERE A WAY I CAN PROVIDE DOCUMENTATION AS TO PROVE DEFAULT AND SEIZE OF THE DEVICE SO IT CAN BE FACTORY RESET?

Demo wrote:
Forgive me for hijacking this thread. My apologies to 6xfulrepo.
FoxFifth, I'm not sure that this is accessible to you yet but if it isn't, it should be within the next 24 hours.
FoxFifth has leveled!
In the meantime,Congratulations on achieving level 6.
It shows "Unauthorized" -- I'll check it again later. Thanks!

HT201209 How can my balance be lower that the amount of the card?

I just redeemed a $10 Itunes GC but it says my balance is $7.42. How can I have less than the $10 I just redeemed????

Click here and ask the iTunes Store staff for assistance. It may be that you previously paid more than you have.
(102325)

If I preformed a factory restore, and didn't restore from time machine, how can I access my files that were backed up?

I wiped my Mid 2009 MBP and decided not to restore from time machine backups but now I need access to a few of the files from the pervious backup, how do I access those files? The previous backups are purple and inaccessible from the time machine window.
Details: I use a G Drive to do my Time Machine backups.

While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.

In latest Nightly, arrow keys don't move the cursor but instead exit the text box. How can I fix this so that the arrow keys move the cursor?

Using Nightly 28.0a1, I'm having a problem with the text box fields when typing. I use Hacker's Keyboard which has onscreen arrow keys and I find it more convenient than fiddling with a tiny cursor thumb when editing text. On the Play Store Firefox it works just fine but on Nightly, any time I try to move the cursor with the arrow keys it jumps out of the text box and highlights other elements on the page. This is annoying beyond belief as it means having to resort to that imprecise thumb cursor that takes forever to get where you want it. Is this a known issue with the latest nightly builds?

Thanks for the report. I have filed bug https://bugzilla.mozilla.org/show_bug.cgi?id=939959. It would be helpful to know and if you can comment into the bug to indicate which input field you are testing on.

Once a row is deleted from a table ,how can i recover it back in the table?

Hi
I have made a delete program in Jdev. I had deleted some of the rows from table such that count goes 2 from 10.
Now I want to use this table again for some other program,how should i restore the deleted rows so that i can use the table properly.
However toad tool showing that no row is deleted from the table.
Thanks & Regards

Can you please elaborate how are you deleting rows from table.

How can I fix my iPod that the screen shows the apple logo then goes black then back and will NOT connect to iTunes?

I turned off my iPod then turned it back on. The normal apple logo appeared on the screen but then it went black and it won't connect to my iTunes. What should I do and what are my opptions.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

On Genes Reunited I saved my login details using the password manager. But instead of saving my email address and password, it has saved the actual word "password" instead. How can I edit it so that the correct details are saved?

I have tried deleting the saved password and saved it again, but it still saves the word "password"

I don't think you're going to be able to. I would guess the other person used your address by accident, and when he found he couldn't access the account (because you'd changed the password) he abandoned it. Your GMail address is now locked to that account and even if it was changed you can't use it to create another.
You already have an Apple ID, which you use to log in here; you can use that to create an iCloud account if that's what you are trying to do. If you want to create a different Apple ID just get another free address such as a Yahoo one.

When i search a screen it is sensitive to capitilizations; how can i remove this so that the search is not cap sensitive?

for example if i search a screen for the word "Mobile", if it is capitalized in the document, and i type "mobile" i will not find it. i'd like to know how to remove the cap sensitive feature of firefox.

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

From an ItemRenderer, how can i reach the component that the Itemrenderer is applied on

Similar Messages

Maybe you are looking for