How can i know if DAQ hw support "buffered task" and "Sample Timing Hw"?

Hi,
i'm choosing the corrent DAQ hw for my application. I read in the NI-DAQmx documenation that if would use the DAQmxRegisterEveryNSamplesEvent(..) function, the hw should support the "bufferd tasks". How Can i know what DAQ device support this feature? Then, I know not all the DAQ device support the "Sample timing hardware". How can i know what DAQ hw use this timing type? Does the NI PCI-6220/6221 support these features?
Thanks in advace.
PS: sorry .. but i'm new of "NI World".

All of the Multifunction I/O (MIO) products, including the PCI-622x products, support hardware timing and buffered analog input tasks.
In general, if a product's specifications include the analog input sample rate (e.g. "up to 200KS/s") then that means the product supports hardware timing and buffered analog input.
--Joe

Similar Messages

  • How can I know the numbers of my podcast hits and downloads?

    I need your help

    iTunes does not provide statistics. The only way to tell is either to have logs from your server, or to use something like Feedburner which then uses a proxy for the URLs so it can count downloads (though this can present problens).
    This page from Apple offers some information:
    http://www.apple.com/itunes/podcasts/specs.html#tracking
    This depends on it being possible to set up these facilities on your server. Note that tracking usage of the feed itself is pretty meaningless, since any subscriber's iTunes will check the feed at 15 minute intervals while iTunes is running.

  • How can i control the DAQ directly from VB

    Actually, it is my first trial to use Visual Basic to get signal from DAQ.
    And i don't how to interface them. I have read an article to use DataSocket.
    However, it demostrated the OPC demo in OPC sever only, and so i didn't know
    how to get the signal directly from DAQ card to monitor the real-time
    signal.
    Also, i have tried to build a .dll from my VI file which is used to monitor
    the DAQ signal. However, the .dll file didn't have any return value or
    argument, did it mean i can use this method?
    And how can i interface the DAQ using VB?and my ADC model is AT-MIO-16E-2!
    Thank you very much

    Hi Sen,
    Are you using Measurement Studio ? If so then you can use the DAQ activeX controls.
    If not and you are using VB directly, then NI-Daq installs with examples for visual basic ( if you chose the option while installing- if not do a custom install and choose VB support). If so then you should find them under Program Files ->National Isntruments->NI-DAQ->Examples->VisualBasic. These may help you.
    Essentially NI-DAQ ships with a .bas file that contains the "declares" for the NI-DAQ dll functions. These files should be in
    Program Files ->National Isntruments->NI-DAQ->Includes (look for the .bas files) You can add these to your project to get access to the DAQ functions..
    On the second question, do you mean you are using labVIEW to create your dll ? If this
    is the case, then when you create your dll (in labVIEW's applciation builder) you have to set the parameters for the function (VI) and also the VI's return values. This will ensure that you can make use of your VI ..If you don't set a return value you really can't use it...Once you set the return value ,and create a dll, then you can use it like any other dll in Visual basic.
    Hope this helps...
    This link may help you
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/5052ad60f1accc3d862568a100717fd1?OpenDocument
    Nandan Dharwadker
    Staff Software Engineer
    Measurement Studio Hardware Team

  • How can I know which model of K9A2VM I have?

    I have a K9A2VM motherboard with an Athlon 64 x2 3600+ AM2 CPU. I would now like to upgrade to an AM3 Phenom II CPU with lots and lots of cores.
    However, I have a problem. I don't know if I have K9A2VM-FD or K9A2VM-FIH and I don't know how to find out. I've opened my box and looked at the card, but it only says K9A2VM. By reading the specs and looking at pictures, I know it has to be one of them, or at least that it is not K9A2VM-F V2 since it only has two RAM slots and I have four of them installed. There are other obvious differences too, which I can easily spot by looking at the picture.
    Now, looking at the CPU support page for -FD and -FIH, they seem to have differences in what CPUs they support:
    -FD at least supports an X6: http://www.msi.com/product/mb/K9A2VM-FD.html#/?div=CPUSupport
    Phenom II X6    Thuban    HDT90ZFBK6DGR    1090T    200    3.20    3M    6M    E0    125    7501v1B.zip
    But the -FIH CPU support page is different: http://www.msi.com/product/mb/K9A2VM-FIH.html#/?div=CPUSupport
    If I can use that processor, I'm really happy. But -FIH doesn't seem to support Phenom II at all. So provided that the information in the CPU support page is correct, it's fairly important to me to know which model I have. But in case nobody knows how I can distinguish between them; if I buy a Phenom II X6 CPU and it turns out that my motherboard doesn't support it; what is the worst thing that can happen? Will I break the CPU or motherboard, or will it simply not work, but the hardware will still be fine?
    Thanks.

    So this is a MS-7501 Version 1.0 card, in addition to being a K9A2VM. The entire web refers to it as "K9A2VM-FD / FHI". One will work, and the other will go up in smoke. And there is no easy way to know which is which. So how can I know? The reason I bought this card was so I could upgrade the CPU at a later time. Now it seems that's not possible, because the available information is so very poor. I've never had to gamble when purchasing hardware from other vendors. Is this common for MSI?

  • How can i know the RPM of my HD?

    I guys...
    Simple question...
    How can i know the RPM of my HD?
    I have a Mac mini and i would like to know that.
    Any ideas?.
    Thanks so much!!!

    Hi!!
    It doesn't show...
    Vendor:          NVidia
      Product:          MCP79 AHCI
      Link Speed:          3 Gigabit
      Negotiated Link Speed:          1.5 Gigabit
      Description:          AHCI Version 1.20 Supported
    FUJITSU MHZ2120BH G1:
      Capacity:          120.03 GB (120,034,123,776 bytes)
      Model:          FUJITSU MHZ2120BH G1                   
      Revision:          00810009
      Serial Number:                  K64PT9427599
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk0
      Medium Type:          Rotational
      Bay Name:          Lower
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
      Capacity:          209.7 MB (209,715,200 bytes)
      Writable:          Yes
      BSD Name:          disk0s1
    Macintosh HD:
      Capacity:          119.69 GB (119,690,149,888 bytes)
      Available:          21.38 GB (21,376,569,344 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk0s2
      Mount Point:          /
    FUJITSU MHZ2120BH G1:
      Capacity:          120.03 GB (120,034,123,776 bytes)
      Model:          FUJITSU MHZ2120BH G1                   
      Revision:          00810009
      Serial Number:                  K64PT9427599
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk0
      Medium Type:          Rotational
      Bay Name:          Lower
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
      Capacity:          209.7 MB (209,715,200 bytes)
      Writable:          Yes
      BSD Name:          disk0s1
    Macintosh HD:
      Capacity:          119.69 GB (119,690,149,888 bytes)
      Available:          21.38 GB (21,376,569,344 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk0s2
      Mount Point:          /
    Those are the 2 texts...
    Any idea?
    Thanks!!

  • How can i know who get my photos and messages from my icloud???, How can i know who get my photos and messages from my icloud???

    How can i know who get my photos and messages from my icloud???

    The following website gives you an overview on how your iCloud data is encrypted: https://support.apple.com/kb/HT4865 So as long as you don not share your Apple ID with someone else, everything should be fine.

  • How can I know if my iphone has been in contact with water?

    I've had lost my iPhone 4 in the snow with a rubber/plastic case over it... And how can I know my phone did got humidity in it or not if it is still working well? And also if it is still possible to be under a warranty ??

    If it has water damage the warranty is void.
    How to check for water damage: https://support.apple.com/kb/ht3302

  • How can i know if my Apple tv still has warranty

    How can i know if my Apple tv still has warranty

    If AppleTV 1 (silver), when did you buy it?
    If AppleTV 2 they came out in September 2010 in US later in other places, so still under 1year warranty.
    If you took out Applecare you can go to support, enter the product's number and check the warranty.
    AC

  • How can I know the right component for a transaction?

    Hi, I have a question
    When creating a new message in Solution Manager, notif_create, how can I know the right component given the transaction code or program name?
    Thanks in advance
    Edited by: María Valdés on Aug 19, 2008 6:25 PM

    Hello Maria,
    Well, in the Support Message window, place the cursor in Component box and press F4. This will brings up another window which contains the components list to which you are authorized. From that list you can choose about which component you want to create that particular support message.
    For example, if you are from Quality department, the following can be visible when you press F4.
    QM - Quality Management
      -- QM-ADB Adobe Forms
           -- QM-ADB-PRN Print Forms
      For the Print Forms, the component will be QM-ADB-PRN
    I hope it helps.
    Cheers,
    Satish.

  • How can I know my Iphone's series number is true

    I want to know  how can i know my phone's series number is true

    Put in your serial number here and compare the results:
    Klantenservice: Serienummers
    or use this page by Apple:
    Apple - Support - Check Your Service and Support Coverage

  • How can I know my pass code pleas?

    How can I know my pass cod?pleas help me

    Hi
    If you have forgotten your passcode there is no way of finding it out again unless you remember it, to reset it see here:
    http://support.apple.com/kb/HT1212
    Hope this helps

  • How Can I know, Material status does not allow purchase??

    Hi Experts,
    Pls. clarify me that, How Can I know/track the follwoing things? Which tables I hv to see?
    I hv a list of materials, some r good , some r bad. So, I hv to trace out the bad materials depending on the criteria, So, pls. let me know Which tbls I hv to look?
    1) Material does not exist in plant 1500
    2) Material status does not allow purchase
    3) Decimal places on the quantity may not be supported by unit of measure
    thanq

    thanq
    MATNR status:
    In our system the values for MARC-BESKZ are
    E     In-house production
    F     External procurement
         No procurement
    X     Both procurement types
    My requirement: I need to trace the MATNR from matnr_list for Material status does not allow purchase
    So, am thinking to write IF condn as,
    IF my_itab-matnr <> 'F' or my_itab-matnr <> 'X'.
    --> this matnr is Material status does not allow purchase
    ENDIF.
    Am I correct?
    3) Decimal places on the quantity may not be supported by unit of measure
    This can be retrieved from table T006
    I hv seen but, DO NOT UNDERSTAMD THIS TABLE entries, bcoz, there r values of 0 & 1 for the DECIMAL PLACES filed, partcularly for EA unit - devciaml places value is 0?
    pls. clarify,
    thanq

  • Money is deducted from my bank account but iTunes show no purchases. How can i know why the amount is deducted ?

    1. Money got deducetd from my account in favor to iTunes store although i purchased nothing.
    2. I checked with iTunes Purchases it confirms that nothing is purchased.
    3. How can i know why the money has been deducted from my sccount ?

    See Here  >  http://support.apple.com/kb/HT3702

  • How can i know how to redeem the code? how can i get this code?

    how can i know how to redeem the code? how can i get this code? please i need you help
    <Email Edited by Host>

    You are trying to create a new Apple ID? You don't have one yet? Is that correct?
    If so, then see this article on how to creat your Apple ID - and make up a password for it. Remember to write it down immediately.
    http://support.apple.com/en-us/HT203993

  • In Generic Extraction how can we know whether it is Delta Enabled or not?

    In Generic Extraction how can we know whether it is Delta Enabled or not?
    Thanks,
    Pramod.

    Hi Pramod,
    In R/3 use RSO2 tcode and enter your DS name and click "Change / Display" In this "Press F7 or Display Filed List" icon near to Generic Delta.In this Screen if Delta Update is Checked means it supports delta method  otherwise it won't support delta method.
    Note:Assign Points if it helps.
    -Arun.M.D

Maybe you are looking for

  • Picking a Max value row out of a group of rows.

    Hi, I'm using Oracle 10.2.0.4.0 For some reason I can't come up with a way to pick out a simple row that contains the max date value out of a group of sub group of rows. The following rows are one group of the result of a complex view ordered by ACCO

  • Tacacs not working for 5508

    Tacacs not working for 3 new 5508 WLC's...working fine for 6 old 4400 WLC's. before 7.116 code upgrade...I remember 5508 was working on and off and now they are not. Same configs on SW, WLC and ACS. Debug on WLC gives..below message when Tacacs is at

  • WPS printer

    Hello, can anybody help how to connect my macbook pro to a printer with WPS? the printer is already connected to the router using WPS, but my macbook does not seem to connect to the printer. thank you very much in advance best, N.

  • How query cost and execution time are releated ?

    hi experts,   i am curious to know, how the query cost and execution time is related?  Query taking less time ,query cost is 65%, but query taking more time but query cost is 0%. how to connect both and improve query performance. Thanks

  • To_date function usage in Oracle 11i

    Expecting the below output using the query: select sysdate, 'to_date('||''''|| sysdate ||''',''DD-MON-YYYY''),'   from dual;           08-OCT-2013     to_date('08-OCT-2013','DD-MON-YYYY'), But, getting the below output, please provide your inputs.