How can I know the delta field for CO-PA datasource?

Hi,folks:
How can I know which is the field assigned as the delta field for CO-PA datasource,as is noticed in the note that after PI2004 the logic has been turned to general datasource,but I can't find the datasource through RSO2.
Full points will be given to u.
Martin Xie

Dear Martin,
The CO-PA DataSources generated use a separate time stamp method for the delta procedure. This procedure means that client-independent DataSources in CO-PA are normally restricted to the clients in which they were generated.
See this link...
http://help.sap.com/saphelp_erp2005vp/helpdata/en/97/6f4d40cef71059e10000000a155106/frameset.htm
Also check ROOSOURCE in R3, asmentioned by Dinesh.
Hope it helps.

Similar Messages

Hi experts . how can we know the stock details for a perticular plant?

hi experts . how can we know the stock details for a perticular plant

check this code
REPORT YSG_MATSTK_REP    LINE-SIZE 220
                          LINE-COUNT 50(5).
*&                       DATA DECLARATION                              *
TABLES: MARA,              "GENERAL MASTER DATA
        MARC,              "PLANT DATA FOR MATERIAL
        MARD,              "STORAGE LOCATION DATA FOR MATERIAL
        MBEW,              "MATERIAL VALUATION
        MVKE,              "SALES DATA FOR MATERIAL
        MAKT.              "MATERIAL DESCRIPTION
DATA: BEGIN OF I_MARA OCCURS 0,
           MATNR LIKE MARA-MATNR,"MATERIAL NUMBER
           MBRSH LIKE MARA-MBRSH,"INDUSTRY SECTOR
           MEINS LIKE MARA-MEINS,"BASE UNIT OF MEASURE
      END OF I_MARA.
DATA: BEGIN OF I_MARC OCCURS 0,
          MATNR LIKE MARC-MATNR,"MATERIAL NUMBER
          WERKS LIKE MARC-WERKS,"PLANT
          LVORM LIKE MARC-LVORM,"FLAG MATERIAL FOR DELETION AT PLANT
                                "LEVEL
          PSTAT LIKE MARC-PSTAT,"MAINTENANCE STATUS
          DISPO LIKE MARC-DISPO,"MRP CONTROLLER
      END OF I_MARC.
DATA: BEGIN OF I_MAKT OCCURS 0,
           MATNR LIKE MAKT-MATNR,"MATERIAL NUMBER
           MAKTX LIKE MAKT-MAKTX,"MATERIAL DESCRIPTION
      END OF I_MAKT.
DATA: BEGIN OF I_MVKE OCCURS 0,
           MATNR LIKE MVKE-MATNR,"MATERIAL NUMBER
           VKORG LIKE MVKE-VKORG,"SALES ORGANIZATION
           VTWEG LIKE MVKE-VTWEG,"DISTRIBUTION CHANNEL
      END OF I_MVKE.
DATA: BEGIN OF I_MARD OCCURS 0,
           MATNR LIKE MARD-MATNR,"MATERIAL NUMBER
           LGORT LIKE MARD-LGORT,"STORAGE LOCATION
           LABST LIKE MARD-LABST,"VALUATED STOCK WITH UNRESTRICTED USE
      END OF I_MARD.
DATA: BEGIN OF I_OUT OCCURS 0,
        MATNR LIKE MARC-MATNR,
        WERKS LIKE MARC-WERKS,
        LVORM LIKE MARC-LVORM,
        PSTAT LIKE MARC-PSTAT,
        DISPO LIKE MARC-DISPO,
        MBRSH LIKE MARA-MBRSH,
        MEINS LIKE MARA-MEINS,
        MAKTX LIKE MAKT-MAKTX,
        VKORG LIKE MVKE-VKORG,
        VTWEG LIKE MVKE-VTWEG,
        LGORT LIKE MARD-LGORT,
        LABST LIKE MARD-LABST,
      END OF I_OUT.
DATA : TOT TYPE I. " TOT - TOTAL TO PRINT STOCK
*&                   S E L E C T I O N - S C R E E N                   *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY.
PARAMETERS: P_WERKS LIKE MARC-WERKS OBLIGATORY.
SELECT-OPTIONS: S_LGORT FOR MARD-LGORT,
                S_DISPO FOR MARC-DISPO.
SELECTION-SCREEN END OF BLOCK B1.
*&                  I N I T I A L I Z A T I O N                      *
INITIALIZATION.
S_MATNR-SIGN = 'I'.
S_MATNR-OPTION = 'EQ'.
S_MATNR-LOW = 'M-14'.
S_MATNR-HIGH = 'M-18'.
P_WERKS = '3000'.
S_LGORT-SIGN = 'I'.
S_LGORT-OPTION = 'EQ'.
S_LGORT-LOW = '0001'.
S_LGORT-HIGH = '0004'.
S_DISPO-SIGN = 'I'.
S_DISPO-OPTION = 'EQ'.
S_DISPO-LOW = '001'.
S_DISPO-HIGH = '002'.
APPEND S_DISPO.
APPEND S_LGORT.
APPEND S_MATNR.
CLEAR S_DISPO.
CLEAR S_LGORT.
CLEAR S_MATNR.
*&             S T A R T - O F - S E L E C T I O N                     *
START-OF-SELECTION.
SELECT MATNR WERKS LVORM DISPO FROM MARC
INTO CORRESPONDING FIELDS OF TABLE I_MARC
                      WHERE WERKS EQ P_WERKS
                      AND MATNR IN S_MATNR
                      AND DISPO IN S_DISPO
                      AND WERKS = P_WERKS.
IF I_MARC[] IS INITIAL.
    WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARC'.
    EXIT.
ENDIF.
SELECT MATNR LGORT LABST FROM MARD INTO TABLE I_MARD
                      FOR ALL ENTRIES IN I_MARC
                      WHERE MATNR = I_MARC-MATNR
                      AND WERKS EQ P_WERKS
                      AND LGORT IN S_LGORT.
IF I_MARD[] IS INITIAL.
    WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARD'.
    EXIT.
ENDIF.
SELECT MATNR VKORG VTWEG FROM MVKE INTO TABLE I_MVKE
                      FOR ALL ENTRIES IN I_MARC
                      WHERE MATNR = I_MARC-MATNR.
IF I_MVKE[] IS INITIAL.
    WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MVKE'.
    EXIT.
ENDIF.
LOOP AT I_MARC.
    MOVE-CORRESPONDING I_MARC TO I_OUT.
    CLEAR MARC.
    SELECT SINGLE MATNR MBRSH MEINS FROM MARA
                     INTO CORRESPONDING FIELDS OF MARA
                     WHERE MATNR = I_OUT-MATNR.
    IF SY-SUBRC = 0.
      MOVE: MARA-MBRSH TO I_OUT-MBRSH,
            MARA-MEINS TO I_OUT-MEINS.
    ELSE.
      CONTINUE.
    ENDIF.
    SELECT SINGLE MATNR MAKTX FROM MAKT
                    INTO CORRESPONDING FIELDS OF MAKT
                    WHERE MATNR = I_OUT-MATNR.
    IF SY-SUBRC = 0.
      MOVE: MAKT-MAKTX TO I_OUT-MAKTX.
    ELSE.
      CONTINUE.
    ENDIF.
    LOOP AT I_MARD WHERE MATNR = I_MARC-MATNR.
      MOVE: I_MARD-LABST TO I_OUT-LABST,
            I_MARD-LGORT TO I_OUT-LGORT.
      APPEND I_OUT.
    ENDLOOP.
    LOOP AT I_MVKE WHERE MATNR = I_MARC-MATNR.
      MOVE: I_MVKE-VKORG TO I_OUT-VKORG,
            I_MVKE-VTWEG TO I_OUT-VTWEG.
      APPEND I_OUT.
    ENDLOOP.
    CLEAR I_OUT.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME = 'C:\matstk.TXT'
   FILETYPE                        = 'ASC'
TABLES
    DATA_TAB                        = I_OUT.
*&                  T O P - O F - P A G E                              *
TOP-OF-PAGE.
WRITE:/ 'DATE:' ,SY-DATUM.
*&                  E N D - O F - P A G E                              *
END-OF-PAGE.
WRITE: / SY-ULINE,
         /100 'PAGNO: ',SY-PAGNO,
         SY-ULINE.
*&        E N D -- O F -- S E L E C T I O N                           *
END-OF-SELECTION.
LOOP AT I_OUT.
    AT FIRST.
      WRITE :/ 'MATERIAL EXTRACTION REPORT',
               SY-ULINE.
    ENDAT.
    WRITE:/    SY-VLINE,
               I_OUT-MATNR,SY-VLINE,
               I_OUT-MEINS,SY-VLINE,
               I_OUT-WERKS,SY-VLINE,
               I_OUT-LVORM,SY-VLINE,
               I_OUT-PSTAT,SY-VLINE,
               I_OUT-DISPO,SY-VLINE,
               I_OUT-MBRSH,SY-VLINE,
               I_OUT-MAKTX,SY-VLINE,
               I_OUT-VKORG,SY-VLINE,
               I_OUT-VTWEG,SY-VLINE,
               I_OUT-LGORT,SY-VLINE,
               I_OUT-LABST,SY-VLINE.
    TOT = TOT + I_OUT-LABST.
    AT NEW MATNR.
      WRITE : 'NEW RECORD',
               SY-VLINE.
    ENDAT.
    AT END OF LABST.
      WRITE : 'STOCK = ',
               TOT,
               SY-VLINE,
               SY-ULINE.
    ENDAT.
    AT LAST.
      FORMAT COLOR 7 INTENSIFIED OFF.
      WRITE : /159 'TOTAL STOCK = ',
                 TOT.
    ENDAT.
ENDLOOP.
    WRITE : /159 'TOTAL STOCK = ',
                 TOT.
regards,
srinivas
<b>*reward for useful answers*</b>

How can I know the right component for a transaction?

Hi, I have a question
When creating a new message in Solution Manager, notif_create, how can I know the right component given the transaction code or program name?
Thanks in advance
Edited by: María Valdés on Aug 19, 2008 6:25 PM

Hello Maria,
Well, in the Support Message window, place the cursor in Component box and press F4. This will brings up another window which contains the components list to which you are authorized. From that list you can choose about which component you want to create that particular support message.
For example, if you are from Quality department, the following can be visible when you press F4.
QM - Quality Management
-- QM-ADB Adobe Forms
-- QM-ADB-PRN Print Forms
For the Print Forms, the component will be QM-ADB-PRN
I hope it helps.
Cheers,
Satish.

How can I know the encoding format for a file.

I have files encoded in English, Spanish, Japanese etc. I want to know which file has which encoding format while reading.
Can anyone suggest.
Ashish

Language is different from "encoding"...if you mean character encoding. Multiple languages can be represented by a single encoding. The fact that you mix language and encoding in your question confuses me about what you are asking.
If you want to know what language a file uses, you can always use a meta-tag. Or you can do some kind of text analysis based on dictionary lookups to determine language...too complex for my tastes. I think a simple language tag in the file makes more sense.
As for character encoding, you either standardize on a single encoding for all files or again use a meta-tag. If you standardize on a single encoding, you should probably consider one of the Unicode encodings instead of any other character set encoding.
Regards,
John O'Conner

How can i know the price for iphone s5 in Middle East in Oman

hi..
please help me
i want to buy an iphone 5s. how can i buy it from apple store?
how can i know the real price for my country, aware that i am in Middle East exactly in Oman?
and how many time it will take to reach in my country Oman?
please help as soon as you can..
thank you

As I said, if you want to buy it from the USA online Apple store, you will need to have a credit card issued by an American Bank or financial company, you will have to have a USA billing address associated with that card, and you will have to have it shipped to a USA street address.
Aramax is a shipping company - you do not have a credit card from them and they cannot pay for your purchase. Having an account with a shipping company doesn't provide you with a USA source of payment for your purchase.
As I understand it, the Oman government does not allow the iPhone to be sold in Oman, there are no official service providers for it, and thus there is no legitimate source to buy an iPhone from within Oman.
Online Apple stores do not allow payment by foreign means or in foreign currency, they do not do currency exchange, nor do they ship internationally.

How can we know the usage log information in BW?

Hi,
How can we know the usage log for Infocubes & ODS in BW ?
What transactions/tables can we use?
Plz help.

Hi,
you have to activate the BW Statistics
Use the BW Statistics tables
RSDDSTAT
RSDDSTATAGGR
RSDDSTATAGGRDEF
RSDDSTATBCACT
RSDDSTATCOND
RSDDSTATDELE
RSDDSTATEXTRACT
RSDDSTATLOG
RSDDSTATWHM
Happy Tony

How can i know the number of lines in field-symbol internal table

how can i know the number of lines in field-symbol internal table

Hi,
If your field symbol has been defined as an internal table :
Use std describe as
Data: l type i.
describe <fs> lines l.
'l' will contain the number of lines as needed.
FYI
The size of this storage area in a field symbols depends on the number of table lines which is not fixed, but determined dynamically at runtime.
Regards,
Amit

Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you

Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you

Yes you can buy whatever you want if your credit card is in good standing.
Before you buy, read the size of the download in iTunes/App/iBook Store.
Rule of thumb, you need to reserve about 10% of your total space.

How can we know the password for a oracle user

Hi to All,
Can any one help me plz how can we know the password for any user in oracle.
Regards
dxb_dba

Assuming one wants to stay with database-stored passwords (the traditional method), one may want to look at the password aging and complexity enforcing mechanisms.
Oracle has a complete manual around this. For 10gR2, the Oacle Database Security Guide chapter 4 is interesting reading - section 4.3 is the discussion for database authentication. And section 7.4.4 talks about the complexity enforcement.
Message was edited by: Hans Forbrich - reworded so it is not misinterpreted as directed at an individual.

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

How Can i know the orders source. ?? IDOC or VA01

Dear All,
sometimes we create a new order with reference to the order which was created by using IDOC.
How can I know the difference between ..
1) Order created with VA01. (Some of the fields may copied from order created by IDoc.)
2) orders created with IDOC.
Please let me know.
Thank you
Madhu

Thank you for your reply, but the suggestion you have given may work for us. as when we create a order with reference to other order or when we create a order using we19. the newly created order will have all the details of older order and that information will be in EDIDC, which will not be correct.
regards
madhu

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How can i Know the email linked to icloud

Please can anyone help me how to know teh email linked to my phone ??
it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
so please how can i know the linked email to my phone
Thank you

Welcome to the Apple community jorjh.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

How can we know the affected reports when i remove object from universe

Hi All,
If i remove any objects from the universe.
How can i know the list of affected reports.

Thanks for your update.
It shows what are all the reports has been created by using that particular universe.
But my question was, if i remove any object from the universe, Then what are all the reports affected(We may not use that deleted object in all the reports)

How can we change the input field on a view stop showing zeros

Hello,
       To make screen look consistent with other character input field. How can we change the input field on the view stop displaying zeros even though the data type is NUMC and data type should not be change?
Edited by: sap_learner on Mar 25, 2010 5:44 PM
Edited by: sap_learner on Mar 25, 2010 5:49 PM
Edited by: sap_learner on Mar 25, 2010 5:55 PM

hello Manas Dua,
                       Thanks for your help. I am able to resolve my problem.
My code will help the future comers to resolve this kind of issues.
*The code is applied to method WDDOINIT of the default view.
DATA lo_nd_terms_input    TYPE REF TO if_wd_context_node.
DATA lo_nd_terms_input_i TYPE REF TO if_wd_context_node_info.
DATA lv_zeros             TYPE wdy_attribute_format_prop.
lv_zeros-null_as_blank = 'X'.
lo_nd_terms_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
lo_nd_terms_input_i = lo_nd_terms_input->get_node_info( ).
lo_nd_terms_input_i->set_attribute_format_props(
    EXPORTING
      name              = `ENTER THE ATTRIBUTE NAME`
      format_properties = lv_zeros     ).
Edited by: sap_learner on Mar 26, 2010 5:02 PM

How can I know the delta field for CO-PA datasource?

Similar Messages

Maybe you are looking for