How can I limit Bridge searches to just image names?

I'm new to CS5 and use Bridge a lot.
The problem I'm having is that it seems very difficult to limit the images to just the artwork I'm looking for.
When I type in almost any name, the Mac OS will bring up dozens of related files for every sort of OSX segment file.
I only want Bridge to show images.
It seems that in trying to narrow down the choices, the settings are a bit arcane.
When I create a search for document type, there are about 200 arcane sorts to weed out... with photoshop appearing about three screens down the list.
Is there any way to limit the searches to just photoshop .psd and .jpeg files?
Thanks!

Thanks!
I wonder if there is any way to save these basic search parameters, so one doesn't have to go through all that trouble for every search?
If not, I'd say Adobe really dropped the ball on this one, effectively undoing the simplicity in favor of too many bells & whistles... imho.
I find myself just going to the Mac OS finder to search file names, since the Bridge search is so arcane.
IF there was a way to save the basic search for images (as opposed to coming up with every single related name on the entire computer), that'd sure make things quicker.
jn

Similar Messages

PE10:How can I limit a transition to just part of the video

I want to limit the page peel transition to affect the portion of the video screen that depicts a screen showing a slide presentation. The slide show does not show up on the video, so I have to overlay the screen with images from the slide show & want the transitions to affects just that part of the screen.
I can’t seem to limit the transition with a matte.

Great news!
That is sort of like the workflow in PrPro, where one would create a Sequence (think of a mini-Project, in a Project), then edit with the desired Transition, and then Nest that Sequence into a new one, where the PiP would be created from it. In PrE, there are no Sequences, so no Nesting, but you got around that by editing in a Project, then Exporting/Sharing, to then Import into another Project. More than one way to "skin a cat."
Steve G. always has some great workflow modifications, to get most things to work in PrE. Those suggestions are always greatly appreciated.
Good luck,
Hunt

Can't limit "Find" command to just one folder. Why?

I'm trying to find some .jpg files within a certain folder where there are thousands of files. So I open that folder, and enter ".jpg" in the search box. But then the name at the top of the window changes from the folder I just opened, to "Searching Mackintosh HD", in other words, it searches the entire computer.
How can I limit the search to just that one folder?

I just figured this out: When I enter the search term, it does default to "Searching Macintosh HD", but on the left side of the search window there is a little button with the name of the folder I had originally opened.
By clicking on that button, it narrows the search to just that folder.

How can I do a search within a folder on desktop

I have a folder (on the desktop) that I want to do a search within the folder only.How do I limit the search to just the folder without everything on the HD showing.
Thanks
Greg

Care to share which OS you are using?
Command + F usually does the trick.

Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks

Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks

You can't. Why on earth would you attempt to manage 2500 emails with setting up a folder structure or some means of doing so? Simply keeping them in an single inbox is not realistic, no matter what email client you use.

In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)?

Hello, all.
In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?

Click the search magnifying glass and uncheck "Search entire library".
Type in the name of the track.
Click the album of interest to show tracks.
Select the track.
Press the X in the search box to clear the search.
Double click the track you want to start playing first.
tt2

I'v just installed creative cloud 64 bit windows. How can I make bridge the default program to upload pictures rather than lightroom?

I've just installed creative cloud 64 bit windows. How can I make bridge the default program to upload pictures rather than lightroom?

Usually the default program associated with an image file extension is an image developing Program like Lightroom or an image editing program like Photoshop. If you want to change the default associated program to Adobe Bridge you would use Window's Controls Panel file association applet.

How can I limit searches to documents only, not emails?

When I do a search for documents containing a particular word, I would like it to find documents -- not emails containing that word. How can I "turn off" searching emails?

You can't. Although, the Spotlight show search results has mail and webpages listed only applies to Spotlight searches using CMD+spacebar or clicking on the Spotlight icon. At least that's what engineering responded when I filed a bug against that nonsensical behavior in Lion.
After reviewing your submission engineering has determined that the behavior you reported is as expected/designed.
The spotlight preferences set in the prefpane only apply to the spotlight menu in the menubar, not in the finder.
All I can suggest is that you File an enhancement request with Apple asking them to restore the behavior to all Spotlight-based find operations. Do note that they'll most likely not do it.

HT2729 I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?

I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?

you can do this by keeping the external hard drive connected and doing the following
-hold shift key down on computer while opening iTunes and a prompt will appear to choose a library
-select choose library, iTunes should bring up your explorer windows where you can search for the external HD
-after you find the external HD find the iTunes folder you just copied to it
-after opening the iTunes folder look for the file that says iTunes library.itl or if you can't see that extenstion just look for a document looking thing in the iTunes folder that shows up as a database file
-double click the database file and boom iTunes should load your library without having to copy it to the computer
PS: do make sure that if you are going to do it this way, make sure that the external HD is connected at all times, because if you don't then you will get exclamation marks next to your iTunes songs
double PS: if you are unsure how to find out if the iTunes library file is a database file just right click it and choose properties and under the type it should say database file
hope this helps:)

How can I implentate a search bar in TableViewController iOS

How can I implentate a search bar in my TableViewController? Code:
// ViewController.m
// Movie List
// Created by Damian on 20/02/15.
// Copyright (c) 2015 Tika Software. All rights reserved.
#import "ViewController.h"
@interface ViewController ()
These outlets to the buttons use a `strong` reference instead of `weak` because we want
to keep the buttons around even if they're not inside a view.
@property (nonatomic, strong) IBOutlet UIBarButtonItem *editButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *cancelButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *deleteButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *addButton;
// A simple array of strings for the data model.
@property (nonatomic, strong) NSMutableArray *dataArray;
@end
#pragma mark -
@implementation ViewController
- (void)viewDidLoad
 [super viewDidLoad];
 This option is also selected in the storyboard. Usually it is better to configure a table view in a xib/storyboard, but we're redundantly configuring this in code to demonstrate how to do that.
 self.tableView.allowsMultipleSelectionDuringEditing = YES;
 // populate the data array with some example objects
 self.dataArray = [NSMutableArray new];
 NSString *itemFormatString = NSLocalizedString(@"Movie %d", @"Format string for item");
 for (unsigned int itemNumber = 1; itemNumber <= 0; itemNumber++)
 NSString *itemName = [NSString stringWithFormat:itemFormatString, itemNumber];
 [self.dataArray addObject:itemName];
 // make our view consistent
 [self updateButtonsToMatchTableState];
#pragma mark - UITableViewDelegate
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
 return self.dataArray.count;
- (void)tableView:(UITableView *)tableView didDeselectRowAtIndexPath:(NSIndexPath *)indexPath
 // Update the delete button's title based on how many items are selected.
 [self updateDeleteButtonTitle];
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
 // Update the delete button's title based on how many items are selected.
 [self updateButtonsToMatchTableState];
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
 // Configure a cell to show the corresponding string from the array.
 static NSString *kCellID = @"cellID";
 UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:kCellID];
 cell.textLabel.text = [self.dataArray objectAtIndex:indexPath.row];
 return cell;
#pragma mark - Action methods
- (IBAction)editAction:(id)sender
 [self.tableView setEditing:YES animated:YES];
 [self updateButtonsToMatchTableState];
- (IBAction)cancelAction:(id)sender
 [self.tableView setEditing:NO animated:YES];
 [self updateButtonsToMatchTableState];
- (void)actionSheet:(UIActionSheet *)actionSheet clickedButtonAtIndex:(NSInteger)buttonIndex
 // The user tapped one of the OK/Cancel buttons.
 if (buttonIndex == 0)
 // Delete what the user selected.
 NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
 BOOL deleteSpecificRows = selectedRows.count > 0;
 if (deleteSpecificRows)
 // Build an NSIndexSet of all the objects to delete, so they can all be removed at once.
 NSMutableIndexSet *indicesOfItemsToDelete = [NSMutableIndexSet new];
 for (NSIndexPath *selectionIndex in selectedRows)
 [indicesOfItemsToDelete addIndex:selectionIndex.row];
 // Delete the objects from our data model.
 [self.dataArray removeObjectsAtIndexes:indicesOfItemsToDelete];
 // Tell the tableView that we deleted the objects
 [self.tableView deleteRowsAtIndexPaths:selectedRows withRowAnimation:UITableViewRowAnimationAutomatic];
 else
 // Delete everything, delete the objects from our data model.
 [self.dataArray removeAllObjects];
 // Tell the tableView that we deleted the objects.
 // Because we are deleting all the rows, just reload the current table section
 [self.tableView reloadSections:[NSIndexSet indexSetWithIndex:0] withRowAnimation:UITableViewRowAnimationAutomatic];
 // Exit editing mode after the deletion.
 [self.tableView setEditing:NO animated:YES];
 [self updateButtonsToMatchTableState];
- (IBAction)deleteAction:(id)sender
 // Open a dialog with just an OK button.
 NSString *actionTitle;
 if (([[self.tableView indexPathsForSelectedRows] count] == 1)) {
 actionTitle = NSLocalizedString(@"Are you sure you want to remove this movie?", @"");
 else
 actionTitle = NSLocalizedString(@"Are you sure you want to remove these movies?", @"");
 NSString *cancelTitle = NSLocalizedString(@"Cancel", @"Cancel title for item removal action");
 NSString *okTitle = NSLocalizedString(@"OK", @"OK title for item removal action");
 UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:actionTitle
 delegate:self
 cancelButtonTitle:cancelTitle
 destructiveButtonTitle:okTitle
 otherButtonTitles:nil];
 actionSheet.actionSheetStyle = UIActionSheetStyleDefault;
 // Show from our table view (pops up in the middle of the table).
 [actionSheet showInView:self.view];
- (IBAction)addAction:(id)sender
 [self.dataArray addObject:@"New Movie"];
 // Tell the tableView about the item that was added.
 NSIndexPath *indexPathOfNewItem = [NSIndexPath indexPathForRowself.dataArray.count - 1) inSection:0];
 [self.tableView insertRowsAtIndexPaths:@[indexPathOfNewItem]
 withRowAnimation:UITableViewRowAnimationAutomatic];
 // Tell the tableView we have finished adding or removing items.
 [self.tableView endUpdates];
 // Scroll the tableView so the new item is visible
 [self.tableView scrollToRowAtIndexPath:indexPathOfNewItem
 atScrollPosition:UITableViewScrollPositionBottom
 animated:YES];
 // Update the buttons if we need to.
 [self updateButtonsToMatchTableState];
#pragma mark - Updating button state
- (void)updateButtonsToMatchTableState
 if (self.tableView.editing)
 // Show the option to cancel the edit.
 self.navigationItem.rightBarButtonItem = self.cancelButton;
 [self updateDeleteButtonTitle];
 // Show the delete button.
 self.navigationItem.leftBarButtonItem = self.deleteButton;
 else
 // Not in editing mode.
 self.navigationItem.leftBarButtonItem = self.addButton;
 // Show the edit button, but disable the edit button if there's nothing to edit.
 if (self.dataArray.count > 0)
 self.editButton.enabled = YES;
 else
 self.editButton.enabled = NO;
 self.navigationItem.rightBarButtonItem = self.editButton;
- (void)updateDeleteButtonTitle
 // Update the delete button's title, based on how many items are selected
 NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
 BOOL allItemsAreSelected = selectedRows.count == self.dataArray.count;
 BOOL noItemsAreSelected = selectedRows.count == 0;
 if (allItemsAreSelected || noItemsAreSelected)
 self.deleteButton.title = NSLocalizedString(@"Delete All", @"");
 else
 NSString *titleFormatString =
 NSLocalizedString(@"Delete (%d)", @"Title for delete button with placeholder for number");
 self.deleteButton.title = [NSString stringWithFormat:titleFormatString, selectedRows.count];
@end

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible.
*Firefox menu button > Options
*View > Toolbars (press F10 to display the menu bar)
*Right-click empty toolbar area
Use Toolbar Layout (Customize) to open the Customize window and set which toolbar items to display.
*check that "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*if "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette into the Customize window to the Bookmarks Toolbar
*if missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*if you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar setup
*https://support.mozilla.org/kb/How+to+customize+the+toolbar
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

How can I limit the number of emails retained on my ipad air?

How can I limit the number of emails that are retained on my iPad Air? Because of legal requirements of a long-term project, I cannot permanently delete emails relating to that project from my ISP's mail server. My gmail account contains over 17,000 emails and, upon setting up my new iPad, and updating to ios 7.1.1, I now have all 17,000+ emails taking up space. I would like to limit the emails by count as I was able to do on my old iPad running ios 5.1.1 OR to retain them based on date range. I have not found any instructions on the support discussions or general iPad blogs that allow me to do that. Any way around this problem?
I also miss the 5.1.1 mail search feature that allowed me to narrow the search by from/to/subject/all. Does anyone know if that feature is available using some little-known ios 7.1.1 feature?
Thanks for your help.

jlfcba wrote:
IOS 7.1.1 doesn't show a "days to sync" parameter anywhere in SETTINGS/Mail,Contacts,Calendars/ACCOUNTS/GMAIL Account/ GMAIL Acccount Info. There is nothing in iTunes relating to such an option either. So, it seems I'm back to square one.
If you have a decent mail provider like Microsoft Hotmail or Outlook.com mail it does.
If you have Gmail it does not. Quite right. Gmail is rubbish.

How can I get a search bar added when trying to archieve emails in my IPhone's email app?

My IPhone email app is connected to my Outlook email system in which I have many archieved folders, when I want to place an email in my archieved folders on my IPhone I have to scroll a long list of archieved folders to find the right one, how can I get a search bar added to find it easier? My colleague' s Samsung has that function already and can't believe that Apple can be behind Samsung on this.

You probably will not be able to get a refund. The iTunes Store makes it pretty clear that gifts are redeemable only in the same country, and the terms of sale say that all sales are final. But you can contact the iTunes Store and ask:
http://www.apple.com/support/itunes/contact.html
For future reference, you will not get responses from Apple to any question you ask in these forums. We're all just fellow users here. And you posted in a forum for questions about the Communities themselves. You usually will get the quickest and most applicable answers if you ask in the forum dedicated to the product or service about which you are asking.
Regards.

How can I limit the number of ros in TextArea?

As I turn on the line wrap and having used setRows method,
I cannot limit the number of rows of the textarea into 2.
How can I limit it?
Thanks.

camickr wrote:
I give up. You don't know specify requirements and I'm not going to prompt you every 5 minutes for more information.
due to setText method So this implies that the text comes from somewhere, maybe a database, but the user does not type the text directly into the text area.
If you define the text area with 2 rows, then the third row will not be visible, so I don't see the problem. Just don't add the text area to a scroll pane and the user will never know the third row is there.[http://i188.photobucket.com/albums/z55/nwoedf/temp/error.png ]
it demonstrates the problem with excess line
The third row is still visible even I have used setRow(2).

With the new IOS7 I get every email in my inbox. How can I limit to the last 50 like it was before the upgrade?

With the new IOS7 I get every email in my inbox. How can I limit to the last 50 like it was before the upgrade?

You can set the pref browser.urlbar.formatting.enabled to false on the about:config page.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

How can I limit aperture to two displays

I want to run Aperture on display 1 and 2, and Keynote on display 3. When Aperture is active display 1 has most of the application, and both of the other displays show images of whatever is selected on display 1. How can I limit aperture to just two displays.
Aperture 3.2.4 on Snow Leopard 10.6.8

John Guo wrote:
For your account choose "no access" by clicking on the triangle.
Hi a.
What ì assume John means to say is you have to block access to your "guest accounts". What John describes is what you should use for any folders and files you keep outside the Home folder of your Admin account. There's also a more advanced thingy called Access Control Lists, but I'm not going to discuss that here.
Inside your Admin account's Home folder things work a bit differently: by default, at least on my Macs, an account (even it's Administrator) doesn't have access to another accounts data except for the Public and Sites folders. All other folders are unaccessible, which is indicated by a small stop sign in the lower left corner of the folder. Exception are of course folders are that you shared on purpose through File Sharing in the System Preferences menu.
You also talk about Applications. I don't have experience with this but I believe you can create an Applications or Application/Utilities folder in your Admin account's Home folder. In this case you'll be the only one to have access to the software installed. I'm quite sure not all applications support this, and application updates might not succeed.
Which brings me to a question: you talk about "guest accounts": what is the purpose you created them? If it's just to discover the world of Mac OS X, do enable login on a Mac OS X Guest Account: good riddance of the stuff they created when they log out. If it's a bit more don't hesitate to share your thoughts. Note that these forums are in general very helpful.
Eric

How can I limit Bridge searches to just image names?

Similar Messages

Maybe you are looking for