How can I make an analogue falling edge trigger

I'm using a Labjack DAQ board which doesn't support the DAQ-NI VIs. I Need to make a trigger which will stop the acquisition when it detects a significant voltage drop from the peak current. Any advice would be grateful.
Thank you.

Hello Pelle,
I've never used a Labjack DAQ board before so I'm not sure how you
would setup an acquisition that stops on an analog edge. However,
I know that it is very easy to setup a continuous acquisition that
stops on an analog edge using our DAQ board and NI-DAQmx driver.
One thing that you might want to check is to make sure that the Labjack
board actually supports analog "stop" triggering. I know that
LabVIEW and the NI-DAQmx driver installs examples of how to use analog
triggering, perhaps the Labjack driver installs examples as well?
Eric
DE For Life!

Similar Messages

How can I make one entity attribute change trigger another's default value?

Guys and Gals,
Using JDev 11.1.2.1.0
I have an order form which has a LOV (Customers) and an address field. The address field should contain the default address associated with the selected key in the LOV.
To do this, I have an entity (Order) with two attributes (CustomerID & Address). Address has its default value set to "adf.object.getDefaultAddress" which returns the default address for the CustomerID. This only works on initial load.
How would I make this adf.object.getDefaultAddress trigger when I select a different LOV CustomerID in the View Object?
I've tried various things but am a little confused. Is there something akin to partial triggers for entity objects?
I can provide pictures, code, etc.
Thanks,
Will

you can try this.
go the the setter method in your EntityImpl class for the LOV attribute
public void setCustomerID(Number value) {
        setAttributeInternal(CustomerID, value);
        //here call the setAddress() method
    }in your page, set the customerID autosubmit to true and make the Address field PPR the customer Id.
<af:selectOneChoice value="#{bindings.CustomerID.inputValue}"
                           id="soc1"
                           autoSubmit="true">
        </af:selectOneChoice>
        <af:inputText value="#{bindings.Address.inputValue}"
                               partialTriggers="soc1">
        </af:inputText>

How can i make a flipbook with Edge Animate?

Hello everyone, i need to make flipbook for a project and i would like to know if there is any possibility to make one with this program, and how it would be?
Thank you!

I like this one
http://www.jqueryrain.com/?pknOK6Uy

How can you make the iPod tell the diff between a movie and music video

Greetings!
How can you make iPod tell the difference between a Music Video and Movie? Everything I put up on the iPod falls into Movie. So is it something I have to do in iTunes?
Thanks for the help!

Rightclick the video in iTUnes, hit Get info then the "Options" tab. Beside kind you can set it to movie. music video. or TV show

How can I make the execution of my script faster

Hi everyone
How can I make the execution of my script faster, because it takes a lot of time to execute? The following is my script:
DECLARE
CURSOR C1 IS
SELECT A.ITEM_CODE,A.STORE_CODE,ST_UNIT,SA_UNIT,CART_QTY,QUANTITY_ON_HAND
FROM PROJ.IM_LOCATION A
WHERE A.ITEM_CODE BETWEEN :ITEM_FRM AND :ITEM_TO
AND A.STORE_CODE = :FRM_STORE
ORDER BY
A.STORE_CODE ;
CURSOR C2 IS
SELECT A.ITEM_CODE,A.STORE_CODE,ST_UNIT,SA_UNIT,CART_QTY,QUANTITY_ON_HAND
FROM PROJ.IM_LOCATION A
WHERE A.ITEM_CODE BETWEEN :ITEM_FRM AND :ITEM_TO
AND A.STORE_CODE = :FRM_STORE
ORDER BY
A.STORE_CODE ;
big_syb_qty_issue number(12,3);
small_syb_qty_issue number(12,3);
big_issue number(12,3);
small_issue number(12,3);
item_syb_code varchar2(30);
big_syb_qty_rec number(12,3);
small_syb_qty_rec number(12,3);
BI_SUPP_REC number(12,3);
SM_SUPP_REC number(12,3);
big_syb_qty_ADJ number(12,3);
small_syb_qty_ADJ number(12,3);
big_ADJ number(12,3);
small_ADJ number(12,3);
big_syb_qty_rec_iner number(12,3);
small_syb_qty_rec_iner number(12,3);
BI_INTER number(12,3);
SM_INTER number(12,3);
cl_big_qty number(12,3);
cl_small_qty number(12,3);
cl_big_qty1 number(12,3);
cl_small_qty1 number(12,3);
BIG_QTY_OPEN number(12,3);
SMALL_QTY_OPEN number(12,3);
BEGIN
     IF ((:FRM_STORE IS NULL) OR (:ITEM_FRM IS NULL) OR (:ITEM_TO IS NULL) OR (:DATE_FRM IS NULL)) THEN
          SHOW_MESSAGE('You Should Enter the Parameters Values Correctly Please try again !!!! ');
          RAISE FORM_TRIGGER_FAILURE;
          GO_FIELD('DATE_FRM');
     END IF;
DELETE FROM STOCK_AT_DATE_REP2;
COMMIT;
cl_big_qty := 0;
cl_small_qty := 0;
-- MESSAGE('Please Wait The System Calculating The Transactions !!!');
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'BUSY');
FOR R IN C1
LOOP
cl_big_qty := R.CART_QTY ;
cl_small_qty := R.QUANTITY_ON_HAND;
-- Transerfer Data 1
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(CART_QTY,0)) ,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_syb_qty_issue,small_syb_qty_issue
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('ISSUED BIG'||' '||big_syb_qty_issue);
exception
when no_data_found then big_syb_qty_issue := 0;
small_syb_qty_issue := 0;
when others then MESSAGE(10,sqlerrm);
END ;
-- Goods Received Data From Supplier 1
BEGIN
SELECT B.ITEM_CODE,SUM(B.CART_QTY),SUM(ITEM_QUANTITY)
INTO item_syb_code,big_syb_qty_rec,small_syb_qty_rec
FROM IM_GOODS_RECIEVE_HEADER A,IM_GOODS_RECIEVE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('RECEIVED FROM SUPPLIER BIG'||' '||big_syb_qty_rec);
exception
when no_data_found then big_syb_qty_rec := 0;
small_syb_qty_rec := 0;
when others then message(10,sqlerrm);
END ;
-- Adjustement Data 1
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(CART_QTY,0)) ADJUST_QTY,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_syb_qty_ADJ,small_syb_qty_ADJ
FROM IM_ADJUST_HEADER A,IM_ADJUST_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND A.DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('Adjust BIG'||' '||big_syb_qty_ADJ);
exception
when no_data_found then big_syb_qty_ADJ := 0;
small_syb_qty_ADJ := 0;
when others then message(10,sqlerrm);
END ;
-- Goods Received Data From Stores 1
BEGIN
SELECT B.ITEM_CODE,SUM(B.CART_QTY),SUM(ITEM_QUANTITY)
INTO item_syb_code,big_syb_qty_rec_iner,small_syb_qty_rec_iner
FROM IM_TRANS_REC_HEADER A,IM_TRANS_REC_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND REC_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- show_message('here');
-- SHOW_MESSAGE('Received From Stores BIG'||' '||big_syb_qty_rec_iner);
exception
when no_data_found then
big_syb_qty_rec_iner := 0;
small_syb_qty_rec_iner := 0;
when others then message(10,sqlerrm);
END ;
cl_big_qty := (NVL(cl_big_qty,0) + NVL(big_syb_qty_issue,0));
cl_big_qty := (NVL(cl_big_qty,0) - NVL(big_syb_qty_rec,0));
cl_big_qty := (NVL(cl_big_qty,0) - NVL(big_syb_qty_rec_iner,0));
big_syb_qty_ADJ := -1 * NVL(big_syb_qty_ADJ,0);
cl_big_qty := (NVL(cl_big_qty,0) + NVL(big_syb_qty_ADJ,0));
-- srw.message(2000,'cl_small_qty'||cl_small_qty);
cl_small_qty := (NVL(cl_small_qty,0) + NVL(small_syb_qty_issue,0));
cl_small_qty := (NVL(cl_small_qty,0) - NVL(small_syb_qty_rec,0));
cl_small_qty := (NVL(cl_small_qty,0) - NVL(small_syb_qty_rec_iner,0));
small_syb_qty_ADJ := -1 * NVL(small_syb_qty_ADJ,0);
cl_small_qty := (NVL(cl_small_qty,0) + NVL(small_syb_qty_ADJ,0));
-- srw.message(2000,'cl_small_qty'||cl_small_qty); srw.message(2000,'cl_small_qty'||cl_small_qty);
INSERT INTO STOCK_AT_DATE_REP2
VALUES(R.STORE_CODE,R.ITEM_CODE,cl_big_qty,cl_small_qty,R.ST_UNIT,R.SA_UNIT,:DATE_FRM,
:DATE_TO,0,0,0,0,0,0,0,0,cl_big_qty,cl_small_qty);
cl_big_qty := 0;
cl_small_qty := 0;
END LOOP;
COMMIT;
FOR R IN C2
LOOP
-- Transerfer Data 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(CART_QTY,0)) ,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_issue,small_issue
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('ISSUED BIG'||' '||big_syb_qty_issue);
exception
when no_data_found then
big_issue := 0;
small_issue := 0;
when others then MESSAGE(10,sqlerrm);
END ;
-- Goods Received Data From Supplier 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(B.CART_QTY,0)),SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,BI_SUPP_REC,SM_SUPP_REC
FROM IM_GOODS_RECIEVE_HEADER A,IM_GOODS_RECIEVE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('1- SM_SUPP_REC '||' '||SM_SUPP_REC );
-- SHOW_MESSAGE('RECEIVED FROM SUPPLIER BIG'||' '||big_syb_qty_rec);
exception
when no_data_found then
BI_SUPP_REC := 0;
SM_SUPP_REC := 0;
when others then message(10,sqlerrm);
END ;
-- Adjustement Data 2
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(CART_QTY,0)) ADJUST_QTY,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_ADJ,small_ADJ
FROM IM_ADJUST_HEADER A,IM_ADJUST_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND A.DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('Adjust BIG'||' '||big_syb_qty_ADJ);
exception
when no_data_found then
big_ADJ := 0;
small_ADJ := 0;
when others then message(10,sqlerrm);
END ;
-- Goods Received Data From Stores 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(B.CART_QTY,0)),SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,BI_INTER,SM_INTER
FROM IM_TRANS_REC_HEADER A,IM_TRANS_REC_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND REC_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- show_message('here');
-- SHOW_MESSAGE('Received From Stores BIG'||' '||big_syb_qty_rec_iner);
exception
when no_data_found then
BI_INTER := 0;
SM_INTER := 0;
when others then message(10,sqlerrm);
END ;
BEGIN
     BIG_QTY_OPEN := 0;
SMALL_QTY_OPEN := 0;
BEGIN
SELECT NVL(S_BIG_QTY_OPEN,0) ,NVL(S_SMALL_QTY_OPEN,0)
INTO
BIG_QTY_OPEN,SMALL_QTY_OPEN
FROM STOCK_AT_DATE_REP2
WHERE S_STORE_CODE = R.STORE_CODE
AND S_ITEM_CODE = R.ITEM_CODE;
END;
BIG_QTY_OPEN := ((BIG_QTY_OPEN) + NVL(big_issue,0));
BIG_QTY_OPEN := ((BIG_QTY_OPEN) - NVL(BI_SUPP_REC,0));
big_adj := -1 * NVL(big_adj,0);
BIG_QTY_OPEN := ((BIG_QTY_OPEN) + NVL(big_adj,0));
BIG_QTY_OPEN := ((BIG_QTY_OPEN) - NVL(BI_INTER,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) + NVL(SMALL_issue,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) - NVL(SM_SUPP_REC ,0));
SMALL_adj := -1 * NVL(SMALL_adj,0);
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) + NVL(SMALL_adj,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) - NVL(SM_INTER,0));
END;
BEGIN
UPDATE STOCK_AT_DATE_REP2
SET BIG_SUP_REC = BI_SUPP_REC,
SMALL_SUP_REC = SM_SUPP_REC,
BIG_ISSUE_TRAN = big_issue,
SMALL_ISSUE_TRAN = SMALL_issue,
BIG_ADJUST = big_adj,
SMALL_ADJUST = SMALL_adj,
BIG_INTER_REC = BI_INTER,
SMALL_INTER_REC = SM_INTER,
S_BIG_QTY_OPEN = BIG_QTY_OPEN,
S_SMALL_QTY_OPEN = SMALL_QTY_OPEN
WHERE S_STORE_CODE = R.STORE_CODE
AND S_ITEM_CODE = R.ITEM_CODE;
exception
when no_data_found then
NULL;
when others then
message(10,sqlerrm);
END;
END LOOP;
COMMIT;
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'default');
SYNCHRONIZE;
-- SHOW_MESSAGE('The Data Have Been Calculated !!!');
END;
declare
     pl_id ParamList;
APPLICATION_ID VARCHAR2(20):='PRD';
          COMMAND_LINE VARCHAR2(100) :='STOCK_LEDGER';
BEGIN
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'DATE_FRM',TEXT_PARAMETER,:DATE_FRM);
Add_Parameter(pl_id,'DATE_TO',TEXT_PARAMETER,:DATE_TO);
Add_Parameter(pl_id,'ITEM_FRM',TEXT_PARAMETER,:ITEM_FRM);
Add_Parameter(pl_id,'ITEM_TO',TEXT_PARAMETER,:ITEM_TO);
Add_Parameter(pl_id,'FRM_STORE',TEXT_PARAMETER,:FRM_STORE);
IF :REPORT_TYPE = 1 THEN
Run_Product(REPORTS,'C:\INV\RDF\STOCK_LEDGER.rdf',SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id,NULL);
ELSIF :REPORT_TYPE = 2 THEN
Run_Product(REPORTS,'C:\INV\RDF\STOCK_LEDGER_2.rdf',SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id,NULL);
END IF;
END;
Waiting for your valuable answer
Best Regards
Jamil Alshaibani

Make a matte in Photoshop.
From the Photoshop menu bar: File > New > Film & Video Presets. Choose one that suits your FCP project pixel dimensions. Make the background black. Place a white rectangle with rounded corners on top (the white will determine how much of your picture is visible). Flatten Image. Save as TIFF. Import into FCP.
Move your video clips up to V2. Place the imported TIFF on V1. Highlight all clips on V2.
Go to Modify > Composite Mode > Travel Matte Luma. Done.
If you want soft edges, no need for a matte. Double click your clip to place it in the Viewer. Open up the Motion tab > Crop > Edge Feather. Nice and quick. Copy and Paste attributes for the other clips.

On images that are long and narrow horizontally, iPhoto truncates them and automaticall crops off part of each end of the image. How can I make it stop?

On images that are long and narrow horizontally, iPhoto truncates them and automatically crops off part of each end of the image. the thumbnail has a jagged, serrated edge at both ends. How can I make it stop?

Then I do not get your problem - you can import the photo - you can find the photo and you can edit and save the photo - what more do you want?
By defination thumbnails are small images to help you find the large image - the large image is fine and you can find it fine - and you know it is only showing part of the image because of the "jagged ends"
If you think think that iPhoto should display long thumbnails suggest to Apple - iPhoto menu ==> provide iPhoto Feedback
as to your digital photoframe - contact them - in general gital photos frames display one and only one aspect ratio and any photo that is not in that aspect ratio will be modified to display - either cropped to the proper size for the frame or have 'White" space added to fill the frame - that function is totally controled by the Digital Photo frame and any otptions you have will be in the manual or on the support web site for the frame - to put it in old film terms - you can not put an 8x10 print in a 5x7 frame unless you cut the photo down (or a 8x15 photo in an 8x10 frame either)
LN

How can i make a photo that is 10 x 6.6 to 10 x 8 without changing the image in Photoshop CS3?

How can I make a photo that is 10 x 6.6 to 10 x 8 without changing the image in Photoshop CS3?

I could be snarky and say change the image in a different version of Photoshop, but NO...
The only way to make a photo that is one size into another size is to change the image. You have a few choices about how to change it:
One way is to simply expand the height from 6.6 to 8 inches using Image>Canvas Size, using the default setting of having the image centered and leaving the background either black or white, your preference. This will add background color to the top and bottom of your image. This won't change the image itself, but it will change its surroundings.
Another way is to resize the image using Image>Image Size, entering the new dimensions after turning off the aspect ratio lock (resample on). This will stretch the image vertically, however, so it's probably not a good option.
Finally, you could resize the image using Image>Image Size, leaving the aspect ratio lock on and resample on, and increase the height from 6.6 to 8. This will have the secondary effect of enlarging the width from 10" to a greater width. Then you crop the resulting image back down to 10" width, which involves losing some edge areas of the image.

How can I make the edges of the JSC component curved?

It is a very common practice to make the edges curved in web development. Curved edge looks attractive and professional. (for example see blog.com)
How can I make the edges of the JSC component curved? For example, consider Textfield component, how to make the the sharp edges smooth and curved?
Thank you very much.

Follow the steps below implement rounded edges for tabs in a tabset component:
1)Create 2 images: level1_selected.jp and level1_deselct.jpg to be used as the background for these tabs. Thse images can be easily craeted using windows paint software. Just ceate a rectangular image of size 200X30 and draw a rounded rectangle on it.
2) Redefine the following styles in your application stylesheet(originally defined in css_master.css)
.Tab1Div td.Tab1TblSelTd {
     background-color:#EDF5F8;width: 200px;height:40px;background-image:url(images/level1_selected.jpg)
.Tab1Div td.Tab1TblSelTd {
     background-repeat:repeat-x;background-position:left bottom;border-bottom:none
.Tab1Div td {
     background-color:#EFEBEF;width: 200px;height:40px;background-image:url(images/level1_deselect.jpg);border:none
.Tab1Div td {
     background-repeat:repeat-x;background-position:bottom left
a.Tab1Lnk:link, a.Tab1Lnk:visited {
     display:block;padding:8px 15px 0px;font-weight:bold;text-align:center
Results: By doing this you'll have the selected and unselected tabs show up with rounded egdes and also the selected tab will look bigger than the unselected tas making it more prominent.

HT2477 how can I make a snapshot of my screen?

how can I make a snapshot of my screen?

Command-Shift-3: Take a screenshot of the screen, and save it as a file on the desktop
Command-Shift-4, then select an area: Take a screenshot of an area and save it as a file on the desktop
Command-Shift-4, then space, then click a window: Take a screenshot of a window and save it as a file on the desktop
Command-Control-Shift-3: Take a screenshot of the screen, and save it to the clipboard
Command-Control-Shift-4, then select an area: Take a screenshot of an area and save it to the clipboard
Command-Control-Shift-4, then space, then click a window: Take a screenshot of a window and save it to the clipboard
In Leopard and later, the following keys can be held down while selecting an area (via Command-Shift-4 or Command-Control-Shift-4):
Space, to lock the size of the selected region and instead move it when the mouse moves
Shift, to resize only one edge of the selected region
Option, to resize the selected region with its center as the anchor point
http://guides.macrumors.com/Taking_Screenshots_in_Mac_OS_X

How can I make biscuit and then break it to two parts and have some small pieces?

Hello there,
please tell me ..
How can I make biscuit in AE and then break it to two parts and have some small pieces fall down ?
any help would be so much appreciated ..

Strictly inside AE you have two options. Shatter using custom shatter maps and masking + particle effects. Neither would be as conviceing as Dave's solution.
If you have access to a 3D app (blender is free) you can do it there.
Here's a 2 minute project in AE with a stock image:
with a shot of the broken buscuit top animated to fit the split it might be kind of convincing.
Here's the CS6 AEP project file for you to play with. Take a look at all of the elements to see how this worked by selecting all layers and then pressing the u key twice to see everything I changed.

I've been trying to make an account with iTunes n everytime I get to the part of the credit card that's as far as I get because I dnt have one, how can I make an iTunes account without a credit card??

I've been trying to make an account with iTunes n everytime I get to the part of the credit card that's as far as I get because I dnt have one, how can I make an iTunes account without a credit card??

Where are you located?
Just go and buy an iTunes gift card at any store in your country.
Then follow all the steps you did, but when it asks you for the credit card number, there shoujld be a GIFT CARD option which will let you load your account witht eh funds form the gift card without providing a credit/debit card #.

How can i make an iTunes store acount without a credit card?

how can i make an iTunes store acount without a credit card?
im israeli and the israel store is only the app store.
i want to get stuff for free without a credit card.
help?!?

Just go get a prepaid Visa or something. Put a small amount of money on it and then use that to open an account. If that doesnt work just call them. Contacting Apple for Support and Service 1 800 275-2273

HT1918 how can i make an apple id account without a credit card?

how can i make an apple id account ? it says i need a credit card but i dont have one how can i get passed this?

Download a free app, create a new apple id account and click none when it says to fill in credit card information.

How can I make mac except capture from my canon xlh1?

How can I make my imac recognize my canon XL1 Camcorder in Final Cut Express

Assume you are connected by Firewire, and that FCE has Import in some menu? Also check FCE Forum https://discussions.apple.com/community/professional_applications/final_cut_expr ess_hd?view=discussions.

TS3988 When I try and log into the icloud, I get a message that my Apple ID is valid but not an icloud account. How can i make it one?

Whin I try and long into the icloud, I get a message that my Apple ID is valid, but the it is not an icloud account, how can I make it one?

To use iCloud on a PC, you must first set it up using a device with iOS5 or a Mac with OS X Lion.

How can I make an analogue falling edge trigger

Similar Messages

Maybe you are looking for