How can I make Intellicomplete, which is quite essential for me, work with Firefox 3.6 as it already does with 3.5?

Intellicomplete is a word completion software I regularly use in text editing and internet searches in Firefox 3.5 and Internet Explorer. However, Firefox 6 does not accept it. This prevents me from upgrading to Firefox 6 and benefiting from its security features.

In my case it seems that Firefox just doesn't "see" (or can't find?) the coupon printer application anymore after the FF update. (and yes, my add-ons are enabled - to answer the tech support people's first question).
For me, the coupon printer doesn't even show up in my Firefox "Add-Ons" list anymore. Is that what people typically see when they're saying the coupon printer "doesn't work" with FF? The coupon printer was visible on the add-ons list before my FF update, and now it's totally Gone! It seems that Firefox just doesn't "see" (or can't find?) the coupon printer application anymore since the FF update.
When I'm on the coupons.com site and I click "print coupons", it tells me I haven't installed the application. But it Is installed on my computer, I can see it in my folders, and it works on IE, so it's definitely there.
BTW - I have uninstalled/reinstalled the coupon printer application. I have tried all the suggestions on the Mozilla help/forum sites, as well as the Coupons.com web site. I have closed and re-started Firefox after the installation. I have also shut down and restarted my pc after installation. I tried installing the application with Firefox open, and tried it again with Firefox closed. I've even cleared out all my cookies/history associated with Coupons.com.
... I can't think of anything else to try, except for the "solution" of using IE for coupons.
If it Really is a problem on the Coupon.com end of things, do you think it's worth it if we bombard the coupons.com support team with messages saying they need to fix the problem? (or just a waste of time?) ;(

Similar Messages

  • How can I make a book/podcast listening playlist for a blind person?

    How can I make a book/podcast listening playlist for a blind person? How can lots of content be loaded, so that no navigation is required, for hundreds of hours of enjoyment?
    I wanted to create a single playlist with hundreds of hours of books and podcasts for my grandmother who is blind. Then I planned to use something like the app CarTunes which basically makes the touch screen simply a gigantic pause/play button for an already created playlist.  This is perfect for a blind person. The problem: Apple no longer allows you to have a playlist with Audible Books and Podcasts. I have tried; but the podcasts and books are stripped from the playlist. It seems like all podcast and book players require navigation. (How aggravating!?)
    Any help in creating hundreds of hours long spoken (selected between books and podcasts) audio content playlist for a blind person would be much appreciated!!!!

    Well, good news and bad news. I found out how to tell iTunes that all my music videos are, in fact, actual "music videos" and categorize them as such. In the "Get Info" screen for a track, there is a dropdown selector where you can pick the "meta" type, such as "Music Video", "Home Video", "Movie", "TV Show", etc. This allows iTunes and iOS to think they are all music videos and play them in the same list.
    Unfortunately, this is not compatable with my third party device, which is now refusing to play my music videos in a playlist and will only play them one at a time (in a single-track infinite loop no less). Very frustrating!

  • How can I make server use single class loader for several applications

    I have several web/ejb applications. These applications use some common libraries and should share instances of classes from those libraries.
    But applications are being deployed independently thus packaging all them to EAR is not acceptable.
    I suppose the problem is that each application uses separate class loader.
    How can I make AS use single class loader for a set of applications?
    Different applications depend on different libraries so I need a way that will not share library for all applications on the domain but only for some exact applications.
    When I placed common jar to *%domain%/lib* - all works. But that jar is shared between all applications on the domain.
    When I tried to place common jar to *%domain%/lib/applibs* and specified --libraries* attribute on deploying I got exception
    java.lang.ClassCastException: a.FirstDao cannot be cast to a.FirstDaoHere http://download.oracle.com/docs/cd/E19879-01/820-4336/6nfqd2b1t/index.html I read:
    If multiple applications or modules refer to the same libraries, classes in those libraries are automatically shared.
    This can reduce the memory footprint and allow sharing of static information.Does it mean that classes should be able to be casted ?

    You didn't specify which version of the application server you are using, but the config is similar as long as you know what to look for. Basically, you need to change the classloader delegation. Here's how it is done in 8.2
    http://download.oracle.com/docs/cd/E19830-01/819-4721/beagb/index.html

  • How can I make OSX index a network share for spotlight?

    How can I make OSX index a network share for spotlight?
    I am using a QNAP NAS with SMB network shares, which I mount with OS X Mavericks. They are not searchable, as far as I know because of the indexing of network share is by default not activated.
    To force the OS to index them I activated this via mdutils. But this is no solutions. This makes spotlight to index the share once. But I want spotlight to index it always and keep it up to date. I have a huge amount of documents & fotographs, which is very difficult to manage without being searchable.
    Unfortunately the only solution I found in the www was the mdutils-way, which seems not to work, maybe only works not for me.
    I would appreciate any assistance,
    Thank you,
    Stefan

    My thanks to everyone who has contributed to solving this problem here.
    It appears that there still is NOT a good, reliable solution.  Please correct me if I'm wrong.
    I did find this on http://jonathansblog.co.uk/how-to-enable-spotlight-indexing-on-a-network-drive:
    ===================================
    To enable spotlight indexing on a network drive:
    # mdutil /Volumes/name -i on
    To disable the indexing of a connected network drive:
    # mdutil /Volumes/name -i off
    To check the status of indexing on a connected network drive:
    # mdutil /Volumes/name -s
    ===================================
    And, I found this on the Synology NAS forums:
    cd /Volumes
    mdutil shareName -i on
    mdimport -Vp ./shareName
    where shareName = name of your share
    I have used the mdutil /Volumes/name -i on, and it seems to work.
    But, if I understand it correctly, it is a one-time indexing -- the index is NOT keep up-to-date with changes.
    So, how can we keep the index up-to-date?
    My thought was to schedule a Terminal file to execute each night with the mdutil code.
    Would this work?  If so, how would you setup a scheduled run?
    Would it have to be done on each Mac that accesses the Share?

  • How can I make a 1-Click short cut for a specific tool in Adobe Acrobat 9 Pro?

    How can I make a 1-Click short cut for Adobe Acrobat 9 Pro for the function "Create" > "PDF from Scanner" > "Black & White Document"?

    No, Acrobat can't do that.

  • How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?

    How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?  The advertising refers to Print Studio Pro 2 but all I find available to download is version 1.35.

    Thanks - I did notice that the 2 was a superscript on one site but on another (I think the one for the Pro-10 printer) it was definitely a 2 in line with the rest of the text and separated by a space (at least on my browser).  At any rate, I suspected something of the kind and will simply use Photoshop Elements 11 when I want a pattern print until the change is made.
    If you have an inside line to Canon you might also suggest some changes to their Image Garden program, specifically its handling of DVD label projects.  It has several themes and within each theme several layouts.  As far as they go these are fine but they do not give nearly enough flexibility.   The boxes for insertion of images are useful as is the simple procedure for rescaling the image so it is cropped in varying ways while staying within the fixed box.  However, it should be possible (a) to relocate the boxes on the page and (b) to resize and reshape the boxes - probably by a control which would become available by right-clicking on the box.  For example, there are times when the user might want to include a full 16 x 9 frame shot as one of the images, and in general the aspect ratios of the provided boxes do not permit this.
    I have over the years preferred to use Word for this purpose after setting up masks to expose just the printable area of the DVD or Blu-ray disc, setting up the margins so that the center of the disc is in the horizontal center of the page, and finally introducing text and pictures and adjusting the font size of blank lines above the disc to line everything up properly in the vertical direction.  A typical layout might involve one large picture, located so the center hole and the curved outer edge do not block anything important, or two pictures side by side, or four pictures centered vertically (to minimize the effect of the outer edge of the disc) but possibly of different widths (so as to make both close-ups and wide scenes optimal on the same disc label).  The text then goes above and below the pictures.  All of this works perfectly so I probably wouldn't use Image Garden very often for this purpose, but the inability to resize and relocate the boxes must be very limiting for others as well. 
    Some of the layouts have image locations severely reduced by the edge of the disc.
    As I said ... if you have an inside line to Canon .. but if not, please excuse the length of this post!

  • My itunes says that my iphone is synced with another itunes. It gives a name but how do i find out which library it is? I working with 2 computers trying to get music off of one and on to my new one.

    My itunes says that my iphone is synced with another itunes. It gives a name but how do i find out which library it is? I working with 2 computers trying to get music off of one and on to my new one.

    See Recover your iTunes library from your iPod or iOS device and this migrate iTunes library post.
    tt2

  • How can I make a folder in the TV for my home movies

    How can I make a folder in the TV shows for my home movies collection?  I have created a folder in the library in finder and put all the videos in there but they do not appear in itunes.
    pshultz

    It's best to never move iTunes media around in Finder. Add it to the Library through the iTunes interface by dragging them into the window. Once they've been added to the library, you can try using Get Info on the files in iTunes and change the tag info to make them group together. (A unique album name should do this.) If you want them to be included with TV Shows, you can try using Get Info to set the Kind to TV Show (found under the Options tab in Get Info), but I'm not sure if it will work. Otherwise, you could make a playlist and drag them into to access them all in one convenient spot.
    If you add the items as noted above and they still do not appear in your library, it's probably because they are not a compatible format.
    Message was edited by: Diane Wordsmith

  • HT5176 How can I make a call from my new iPad(3rd generation) with wifi+4G

    How can we make a call from iPad 3rd generation with wifi+4G?

    You cant "Call" anyone. Its not a phone. You can facetime other IOS users. Setup facetime with your apple id in ipad settings/facetime. You can also download apps like skype in the app store.

  • I backed up two Iphones to the cloud and accidentally chose merge. How can I reset it to have seperate backups for each phone with the same ITUNES login?

    I backed up two Iphones to the cloud and accidentally chose yes to merge the contacts from the two phones. How can I reset it to have seperate backups for each phone even though I am using the ITUNES login?

    i merged two phones contracts are together how to get back to seperate

  • How can I make Elements 9 my default to open picture files with?

    After using Elements 12 for a months trial and then uninstalling it, I can no longer find Elements 9 listed when I right click on a picture file and select "open with".  How can I restore it to my list of programs with which I can open the file.  I'm using Windows 8 which list aps and some other programs but not Elements 9.

    When you choose "Open With" migrate to the folder of PhotoshopElementsEditor.exe location and choose .exe to open images with . The photoshopelementseditor.exe is present at location "C:/Program Files (x 86)/Adobe/Photoshop Elements 9/PhotoshopElementsEditor.exe.

  • How can i make my external hard drive be the scratch disk with 1 FW input?!

    Hello! I use firewire with my external HD AND my camera...however i only have one firewire input...i set my scratch disk for final cut to work with my external HD but when i am importing footage to my computer with my camcorder, i can not have my external HD plugged in, thus the scratch disk has to be set to something else to continue working. So how can i work around this problem?! Should i just change the settings back after i import the footage and it all goes to place?

    I don't understand the need to daisy chain. I have one Firewire port on my MacBook Pro, and I use a Firewire hub. I've been connecting two 1TB Western Digital My Book Studio Edition hard drives (one for FCE and iMovie projects; one for the media files I create via export), and a Canon NTSC ZR200 miniDV tape camcorder, or a Sony Digital8 tape camcorder, or sometimes a Canopus ADVC 110, without issues. Why not use a Firewire hub? . . . except to save the small expense.

  • How can I make all the Tables in my spreadsheet to work as one?

    I made a spreadsheet for work in Numbers '09 but do to the computers that we have at work, I have to have it exported to Windows Excel, but when I try to export the spreadsheet since I used more than 1 table to create this spreadsheet, each table is converted to an Excel worksheet, and all other objects are placed on separate worksheets since there's more than one table. and I want to know is there anything I can do, to export everything in one spreadsheet, for all the tables to work as one spreadsheet. PLEASE HELP!!

    You may be able to easily consolidate all your tables into one big table to make it equivalent to an Excel worksheet. You can copy/paste from one table to another and you can drag columns or rows from one table and insert them into another. Note that formulas that use column letters or row numbers instead of specific ranges (i.e., B instead of B2:B10) will now refer to the entire column/row in the destination table.
    Without doing this, all the tables, when exported to Excel into separate worksheets, should still work together just like they did in Numbers. Are you saying that they do not?
    Not much you can do about objects.

  • How can i make the volume controller on a pavillion dv4 work after a clean windows install?

    Hello!
    Recently I performed a clean windows 7 install from a windows install disk I previously owned, the problem is that this disk didn't intalled the drivers and programs specific for this computer. What I want to know is which driver or program I need to install to make the volume controller on my computer to work again? The problem is that the volume bar that previously appeared on the screen and the "bing" sound indicating the volume level doesn't appear or sound now.
    All other things seem to work fine, this is the only problem so far.
    Thanks!

    Hi,
    Try downloading and installing the latest HP OSD Utility on the following link.
    http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55152.exe
    After the installation has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How can I make another computer my main computer for sync use

    my main computer is going to be the one that generates the change to book marks and tabs. when I first
    set up sync I used a secondary computer not realizing it would be the main computer. how can i change
    the status of the computers. now that all of my data has merged I need to clean it up and maintain it for
    the new main computer. Thank you Miles

    If your secondary system don't want to SYNC. then try the following method to stop SYNC
    Type '''about:config''' in URL and search for '''services.sync.prefs.sync.''' and set the value as "fasle".

Maybe you are looking for