How can i make my printer print more than one page

HP Officejet Pro 8600

Need more info on what you're trying to do to help you...explain what you're trying to print and how you are trying to print it.
I am an HP employee.

Similar Messages

CUPS - can't seem to print more than one page

Most of the time, it actually doesn't print anything. There's nothing in the error log. The job simply graduates to finished state without printing. Or some times, if I'm lucky, it'll print the first page, and graduate the job to finish state.
I have a Samsung ML-2010, this is my cups.conf:
# "$Id: cupsd.conf.in 8805 2009-08-31 16:34:06Z mike $"
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel warn
# Administrator user group...
SystemGroup sys root
# Only listen for connections from the local machine.
#Listen localhost:631
port 631
Listen /var/run/cups/cups.sock
# Show shared printers on the local network.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseLocalProtocols CUPS
# Default authentication type, when authentication is required...
DefaultAuthType Basic
# Restrict access to the server...
<Location />
Order allow,deny
Allow all
Allow localhost
Allow 127.0.0.1
</Location>
# Restrict access to the admin pages...
<Location /admin>
Order allow,deny
</Location>
# Restrict access to configuration files...
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
</Location>
# Set the default printer/job policies...
<Policy default>
# Job-related operations must be done by the owner or an administrator...
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
# Set the authenticated printer/job policies...
<Policy authenticated>
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI>
AuthType Default
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
# End of "$Id: cupsd.conf.in 8805 2009-08-31 16:34:06Z mike $".
usblp has been blacklisted.
ls -l /dev/bus/usb/002/002
crw-rw-r-- 1 root lp 189, 129 Mar 14 21:41 /dev/bus/usb/002/002

kevku wrote:for me using regular cups with (!usblp) and samsung unified driver, ml-1610 seems to print every second job, not really a problem because I print like 20 pages a month. still
try the solution from the comment above. I had the same problem and that was the fix:
pacman -Rd cups
yaourt -S cups-usblp
and do NOT blacklist usblp.
PS: I also updated the wiki to recommend cups-usblp for samsung printers.
Last edited by Cosmin (2011-09-12 18:58:27)

SMARTFORM: how to create 3 copy (each copy can print more than one page)

SMARTFORM: how to create 3 copy (each copy can print more than one page)
Hello everyone.
my user want to have form that print 3 copy.
such as 1 copy description = master, 2 copy description = copy 1 ,3 copy description = copy 2.
so i create 3 page . I copy from page 1.
and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
please help me.
how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 page

Hello Vinit.
thank you very much for your help.
could you help me more please.
in below code
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Now i out of office .so i cannot test.
where do i set NAST_ANZAL for 3 ?
can i input ?
NAST_ANZAL = 3.
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM

How can I enter my podcast in more than one category? Mine covers arts, education and society and culture, but is listed as "Performing Arts". Thank you for your time!

How can I enter my podcast in more than one category, to reflect the fact that it covers arts, education and society and culture? Thank you for your time!

You can have more than one category - this page shows you how the tags are formed:
http://www.apple.com/itunes/podcasts/specs.html#category
The Store will list only the first category and its sub-category at the top of the page. Like the first category, the others will in theory make your podcast available for searching by category. However searching just on the category in the iTunes Store is most unlikely to throw up your podcast. There are thousands of podcasts out there, and it would be quite impossible to display on one page the entire list for any category. What you see are 'featured' podcasts, chosen by Apple as being special; please see this Tech Note:
http://www.apple.com/itunes/podcasts/specs.html#getfeatured
Note that there is no way you can influence the selection other than making your podcast really special.
If you have further questions about making your podcast it's better to ask them in the Producing Podcasts forum.

How can i use my iphone with more than one itunes

how can i use my iphone with more than one itunes

Sync iPod/iPad/iPhone with two computers
Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans with iTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entries and import the local content you have on that box.
tt2

How can i use Itunes to update more than one IPad with more than one owner

How can i use Itunes to update more than one IPad with more than one owner? I own an IPad and my wife owns an IPad. I want to use my system to update both IPads. We have different Apple Accounts and different applications. Is this possible?

Of course, that is too easy. I am such a bonehead.

How can I change all of (or more than one) speaker note to a voice at once?

Hello...
I have a lot of speaker notes that I need to apply a specific voice to. How do I apply the same voice to all of the speaker notes in the whole project at once? Or at least more than one? Any help would be appreciated. Thank you! I am working with Captivate 6.

Hi Vikram,
Thanks. That tip definitely helps! You just have to be careful when you use the CNTRL button and not highlight the name of the slide as you try to highlight the voices. If you do that, then the drop down box becomes “unclickable”. Unfortunately, when using the control button, it is sometimes impossible not to highlight the name of the slide as well.
Ryan
Von: VikramGaur [email protected]
Gesendet: Donnerstag, 20. September 2012 16:25
An: Scharfer, Ryan
Betreff: How can I change all of (or more than one) speaker note to a voice at once?
Re: How can I change all of (or more than one) speaker note to a voice at once?
created by VikramGaur<http://forums.adobe.com/people/VikramGaur> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/4713463#4713463

Problem with printing more than one page (ghostscript broken?)

Hello,
since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted. As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
-rw-r--r-- 1 root root 9906288 21. Mär 2010 /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
-rw-r--r-- 1 root root 11402624 8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
[root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
Löse Abhängigkeiten auf...
Suche nach Zwischen-Konflikten...
Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
:: libspectre: benötigt ghostscript>=9.00
[root@arch32 dieter]#
Anyone else having printing problems or a solution for my problem?
Thanks, Dieter

This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

How can I sort a table using more than one column in Numbers or in Pages?

How can I sort a table using more than one column in Numbers or in Pages?

Hi Ron,
On the right side of the Toolbar click the Sort and Filter button, then select Sort.
You can then set up a multiple column sort.
Click Add A Column, Specify the sort for that column, Repeat.
Jerry

How can a file be accessed by more than one app?

Hi,
I am new to iOS4 and the whole iPhone, iPod technology. I am really a windows user.
How can a file be accessed by more than one app. In my case I want to transfer a midi file from my PC to my iPod Touch and be able to open it from a couple of Midi Players which I am evaluating - or does each Midi Player have to import the file seperately for its own use?
Thanks,
Sam

It seems to me that what you want is exactly a session bean will do. The EJB container is responsible to maintain a certain number instances (configurable) of your session bean and serve multiple clients at the same time. Session beans are not necessarily destroyed after serving a client. If you configure your ejb server to have a pool size of 2 to 100, then you will always have at least 2 instances (no more than 100 even there are a lot of client access) of this ejb ready to serve. The only thing not clear to me is that do you want to use only ONE instance of this bean or you don't care as long as multiple clients can access this bean's service? Since you mentioned that there is not a real database access, you can certainly use a Singleton but a 'regular' session bean with static fields should do it also if these fields will not be modified by clients.
PC

Re: Can't print more than one page of a PDF

I have Acrobat and Reader 9.3.3. With either program I can't print more than 1 page of any PDF despite changing settings. What will fix this problem? Thanks in advance for your help.

Adobe strongly recommends that you should NOT have Acrobat and Reader installed on the same system. They have the bad habit on stepping on each other's files. You do not need both programs to read PDF files.
You should uninstall Reader and repair Acrobat. I also recommend that you restart after removing Reader and after repairing Acrobat.
Good luck.
Ken Friedman

Why can't I print more than one page?

I'm pring a lafge text:
<af:inputText id="it1" value="#{main_bean.resp}" readOnly="true"
simple="true" rows="#{main_bean.kvitRows}" styleClass="AFStretchWidth"
visible="true"/>
That is I use one af:inputText with many rows.
To send it for pring I use JavaScript.
<af:resource type="javascript" >
function printPage(evt){
window.print();
evt.cancel();
window.close();
</af:resource>
When printing it clips the text. If the text is more than one page it print only one page. I need to continue printing on the next pages (not to clip). When printing othe web-pages it distributes it onto several paper pages.

Michele Stapleton wrote:
I think using Numbers is too complicated because what I want essentially is a text document I can alter. I take the information they put into my form and repurpose it in a way I find more useful while performing the job. So, I want to be able to take their typed information and move it around. And add some more of my own.
You may perfectly "their typed information and move it around" in Numbers which behave as the AppleWorks Draw environment.
Here is the second page in the document which I posted before.
As you may see, the standard Word Processor features are at work:
Spell Checker
Selection…
I exported my AppleWorks documents in Numbers ones.
And of course, with the Numbers document open, you may copy pieces of it and paste them in Pages's pages.
Yvan KOENIG (VALLAURIS, France) jeudi 16 juin 2011 16:44:30
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

K5400 will not print more than one page at a time.

The K5400 Office Jet Pro will not print more than one at a time when I change the number of pages to print in Printing Preferences. I have downloaded all the updates available and have tried many times.
Using a Windows XP SP3 computer.
Thank you, Marion

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

On my iPad 3, how do I make calendar items lasting more than one day appear as such on the monthly view of my calendar? Right now only the first day of the item appears.

On iPad 3, all of my calendar items lasting more than one day do not appear correctly when looking at the monthly view of the calendar; only the first day of the appointment appears. For example, if I am taking a vacation for 4 days, only the first day of the vacation is marked on the calendar, instead of being listed on all 4 days. When I look at the weekly view, however, it is correct and is listed on all 4 days. The problem here of course is that at a glance, there is no way to look at my monthly schedule. On my iPhone, everything is correct, regardless of month or week view, so clearly this is an iPad problem I guess? Please advise on how this can be corrected. Thank you!

Unfortunately you can't do what you want. Many people have complained to Apple about this. I suggest you provide Apple feedback directly at http://www.apple.com/feedback/macosx.html. They will not provide a direct response but hopefully if enough people provide feedback Apple will fix this.

How can I share iPhoto libraries across more than one computer?

I am trying to find a solution for multiple users accessing a single iPhoto library.
I want to have just one "master" library for my family, which we can all access via different computers.
I also want to apply the same principle of a "master" library for iTunes and iMovie, plus all our files/documents - see the original question here: https://discussions.apple.com/thread/4940803.
Does anybody have any suggestions?
Thank you

iPhoto has never been designed as a shared network database. What you want to do is currently not supported, Jerry, sorry.
Some things to consider - assuming you are using the most recent iPhoto version:
iPhoto '11 will not allow to have the library be opened by more than one user at a time. It will lock the iPhoto library, if it is already in use.
The iPhoto library needs to be on a disk, that is formatted MacOS X Extended (Journaled), otherwise iPhoto will not open it. Most network volumes have a different formatting.
Network access is considerably slower than the access to a locally connected drive. You will have a noticable decrease in performance when working over the network. Editing the images will be no joy, if each and every access to the databases inside the library needs a network access.
Since iPhoto is not specified as a network database, there is no built-in protection against network drop-outs and transmission errors when doing database transactions. You will be risking to corrupt your iPhoto library.
Save sharing options would be:
Let the iPhoto library be managed by one user, but give read-access to your family members using the "Sharing" preferences. You can share all albums or selected albums on your local network for browsing.
Put your iPhoto library on a portable drive and let each family member use the drive in turn.
Use shared Photo Streams to share your photos.
This is Apple's recommendation on how to share a library:
iPhoto: Sharing libraries among multiple users
Regards
Léonie

How can I search for files with more than one keyword?

I´ve created some keywords, and some files in my folder are tagged with two, three or more keywords.
Is there a way to search for files using more than one keyword on the search field?
Thanks!

Use the Find command (menu Edit) and in criteria at the right side is a plus sign to add another criteria and set it to your custom wishes.
make a choice in results and you should be OK

How can i make my printer print more than one page

Similar Messages

Maybe you are looking for