How can I make the start and end of a move smooth?

In Premiere Elements 11 I often have zooms or pans which I want to begin gradually, then speed up slightly and then slow down as each one ends. I've tried every comination and permutation of temporal and spatial interpolation, and I still can't seem to get it quite right. Often I wind up with the image doing a graceful arc (no doubt the result of a bezier interpolation) rather than just moving in a straight line. Is there just a simple solution? I just can't stand having a move start and stop with jerky linear motion.
Thanks in advance.

Mark West
To supplement prior information
If you want to change what the clip rubberband represents, you can click on the tiny triangle next to the Timeline's clip's title.
Please refer to blog post on Video and Audio Track Content Rubberband
http://www.atr935.blogspot.com/2013/06/pe11-video-and-audio-track-rubberband.html
In the case of a video clip, the default for its rubberband is Opacity. But that can be changed to Motion. As I wrote in the blog post
The Motion Property options are Position, Scale, Constrain Proportions, Rotation, Anchor Point, or Anti-Flicker filter. The Opacity choice is just Opacity.
Keyframing of these properties are reflected as white dots on the clip's rubberband and can be adjusted at that level.
If you do not see the white dots keyframes in the clip's rubberband, then right click the file, select "Show Clip Keyframes", follow to Motion and Opacity, pick one, and follow to find your property named, and select it.
At the rubberband level, right clicking a keyframe (white dot) there, offers opportunities for Linear, Bezier, Auto Bezier, Continous Bezier, Hold, Ease In, Ease Out, and Delete. If you select Bezier, do you see the keyframe handles?
I have not done this, but you might want to see how much of the following you can get done in Premiere Elements using the Final Cut description of "Smoothing Keyframes with Bezier Hangles".
https://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=67%26section= 2%26tasks=true
ATR

Similar Messages

  • How can I get the start and end of a date range?

    Post Author: RobR
    CA Forum: Formula
    Greetings!
    I have a report whose records are selected if a date field is within the date range returned by the LastFullWeek function.  I want the header for that report to print the first and last dates in that range.  I don't see a way to extract those dates from a date range.  How do I do it?
    Also, I think it would be nice to be able to walk through a date range using a for loop, something along the lines of the following:
    for (thisDate in LastFullWeed)(    do something;)
    but I didn't see syntax like that in the help system.  If I could do this, then I could get the first and last date.  Is this possible?
    Thank you!
    RobR

    Post Author: SKodidine
    CA Forum: Formula
    If all you want is the starting date and ending date of the function LastFullWeek, then all you have to do is this:
    minimum(LastFullWeek) & '          ' & maximum(LastFullWeek);
    On a side note, from your post: for (thisDate in LastFullWeed)  Whatcha smokin'  Willis?? 

  • How can I make the rolumn and row headers appear on the printed sheet?

    I am working in Numbers'09. I want to print out my chart with the column letters and row numbers showing.
    How can I make the rolumn and row headers appear on the printed sheet?

    g,
    Those annotations are called "Labels", and they are only visible during editing when a cell selection is made within the table. If you need to have the labels on your final output, you can create labels in Text Boxes and position them adjacent to the table.
    Jerry

  • When I print a webpage from FF how can I make the text and images bigger?

    I am trying to print an eticket for a flight. The text on the schedule comes out too small and the UPC symbol's black lines look ganged together. I know I can view it zoomed up, but how do I make the text and images stay zoomed so they will print out that way?

    I upgraded but the problem remains. At least with Firefox I do have the option to print a selection even if it mangles the top and bottom lines. With Safari or Chrome I have no option to print a selection. At the moment the only way to get a complete copy of the selection is to copy to openoffice etc and print from there.

  • How can I use the "home" and "end" buttons

    I have an external apple keyboard (full style, with number pad and all) plugged into my macbook.  However, the "home" and "end" buttons don't function the way I'd like (i.e. they don't go to the beginning or end of a line).
    Can I ever get this to work or does it just not function with a laptop that doesn't have that function in the first place.  I'd like to not have to use multiple keystrokes just to get a similar home/end result.
    Thanks!

    "on your hub dont use the phone it will cost you more.when i change over to bt they never told me that i would be charged for useing this phone so i dont now.crafty bt again.when my contract is up i will be leaveing bt for ever,georgesaa."
    Not sure why you are charged for calls on this, as standard you would get free evening and weekends and there are packages for unlimited anytime.
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • How do you make the begging and end arrows appear?

    I am only seeing the end arrow, what's the keyboard shortcut to bring up the beginning arrow so I can edit my projects beginning point?

    Have you ever heard of a buzzing sound after mix down? It seems like this program is designed to make people stressed out. One issue is resolved another one crops up. It's making me want to smash my guitar, which I won't because that'll just create another problem.

  • Getting the start  and end dates of the week

    Hi,
    I was stuck with a problem in getting the start date and end date of the week,i know the month ,week and year also,with these three values how can i get the start and end dates of a week.please help me
    Thanks

    There is no simple way. It has to be a math calculation.
    There are several ways you can get the dates. First you have to know what day is January 1st and what day is december 31st for a particular year. Second you have to check whether the given year is a leap year or not. Based on the abvove information you should be able to find out what day is a particular date.
    Hope this helps to get you started.
    - Venkat Dhurjati.

  • HT1364 I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again.  How can I make the iTunes media folder change permanen

    I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again.  How can I make the iTunes media folder change permanent?  I have an older machine with Windows XP.

    I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
    Try this:
    Prepare iTunes so that it can see the external drive.
    Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
    Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
    Close and shut down the computer.
    The next time you turn the computer on again, connect the external drive
    Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
    Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
    If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
    Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
    What happens, which step do you have problems with?
    Message was edited by: the fiend

  • How can I make the background one solid color?  It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop.  So, how can I have just a solid white background?

    How can I make the background one solid color?  It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop.  So, how can I have just a solid white background?

    When talking about a specific image posting the image may be useful.
    One can use a Layer Mask and add a white Layer underneath.

  • I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

    I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
    Thanks.

    Drag the file into the audio window in the Document inspector...

  • My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

    My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • How can I make the popup with empty fileds and create new record?

    I would like to use a popup to create new record.
    I created a af:popup by drag and drop a VO from data control to jsff. then, I created a button and place a af:showPopupBehavior. I was able to popup window by click the button.
    however, the window filled with the information from the 1st record. and when I select a record in table and click popup, the popup is filled with that record.
    How can I make the popup with empty fileds and create new record by saving the popup?
    Thanks

    You can have edit and new buttons, in the PopupFetchEvent identify button source (using popupFetchEvent.getLaunchSourceClientId()) if new button clicked clear the binding using below code.
    If you want to see empty fields, in the popup PopupFetchEvent clear the input component bindings.
    resetBindingValue("#{bindings.<componentid>.inputValue}", null);
        public static void resetBindingValue(String expression, Object newValue) {
            FacesContext ctx = FacesContext.getCurrentInstance();
            Application app = ctx.getApplication();
            ExpressionFactory elFactory = app.getExpressionFactory();
            ELContext elContext = ctx.getELContext();
            ValueExpression valueExp = elFactory.createValueExpression(elContext,expression,Object.class);
            Class bindClass = valueExp.getType(elContext);
            valueExp.setValue(elContext,newValue);
        }

  • How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny?

    How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny in Firefox? I tried some suggestions that dealt with entering "about:config" in a fresh browser, but to no avail. I also downloaded an add-on called "Theme Font & Size Changer", but that didn't work either. So, I am reaching out here as that was a suggestion that another user here offered.

    Ah, yes- that is an ultra high DPI (dots per inch) display. This is a known issue in Flash Player, which Adobe is working on fixing.
    In the mean time, you can get some videos to have normal-sized controls by switching Youtube to the HTML5 video player:
    In Firefox, go to https://www.youtube.com/html5 and click the "Request the HTML5 player" button.

  • On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

    On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

    Click on the Hot Corners..  button and look at the four definitions.  In the picture below, if you moved the cursor to the right top of the screen, it would slide all the applications off the screen as you describe and show the desktop.  Set it to "-" to deactivate.

  • We had to change the feed adress and the epsiode adresses. Now all the episodes of my podcast are downloaded (although i have downloaded them already). How can I make the changes in my feed and avoid that all the episodes are reloaded?

    Hello,
    We had to change the feed adress (<itunes:new-feed-url>)and the epsiode adresses in the feed because the feed and the episode-files are on a new server. Now when i open my iTunes subscription of our podcast all the episodes of my podcast are downloaded again (although i have downloaded them already).
    My Question therefore is: How can I make the changes in my feed and avoid that all the episodes are reloaded?
    Maybe have an answer?
    Thank you very much.

    Thank you very much for your answer
    As I see now, our 'guid' tags contain the episode URLs
    To avoid this problem in the future i would like to change guid tags. Can you please tell me how a guid tag should look like if it is not the URL?
    Thank you for helping us!
    ps now it looks like this eg:
    <guid isPermaLink="false">http://www.castyourart.com/podcasts/213_thinkglobal_en.mp4</guid>

Maybe you are looking for