Urgent  impalement delegate option in workflow

HI All,
I have the workflow with approver step. when a task comes to approver user. here we have to provide option to the user to delegate task some one to approve.
Is this possible to implement in UCM workflow?
Please help me how to implement this ?
Thanks,
Kishore
Edited by: kishore on Dec 8, 2010 12:21 AM

In order to do that you have to explain how your solution works.
How is the workflow started? The date should be passed in the workflow container, and you should thus add a new importing container element for it. Alternatively, if the previous is not feasible, can you assume that the workflow is started the same date (or with a fixed offset) as the file is created. If so you can set the date in the workflow instead of passing it as a parameter.
The date will of course have to be passed on to your step, and from your step to the BOR method you execute. This however, is just a matter of binding and importing elements, and I assume you are able to solve that on your own.
What is this report you have mentioned? SAP standard? I assumed it wasn't. If it is a customer report, you will of course need a new selection screen parameter, and when your BOR method submits the report (or alternatively calls the transaction) the date must be passed as one of the parameters.
Hope that helps, but if it doesn't you have to be MUCH more specific in your questions. You have to explain what you are trying to do and what your starting point (current solution) is.

Similar Messages

  • Issue with PO Approval (POAPPRV) delegate option

    Hi All,
    I'm working on PO Approval i.e. (POAPPRV) customised workflow. When I'm using forward option for PO approval it is working fine and PO is getting approved.
    But at the same time if i'm using delegate option for the PO approval it is not apporving the PO and workflow is getting stuck at one activity.
    for both process i'm using same set of data.
    Please let m eknow if you have any idea about this issue.
    Thanks,

    Hi Kjetil,
    Release strategy is being used. Configuration for release strategy is given as following.
    RGroup Rcode   Workflow     Agent
    Z6          R1         1                Blank
    Z6          R1             1                Blank
    Z6          R1             1                Blank
    Z6          R1             1                Blank
    Release is sequential.
    For column 'Agent' mentioning position or User is not really useful because we are getting agents through Z table. Reason is: current org structure supports 1 position with multiple users from same department. In our scenario we need to find initiators department then find relevant approval levels for that departemnt. So I cannot mention any position in 'Agent' Column as release code will be locked against one position and one departetment.
    Agents picked through Z table. Table has fields  Agent/ UserID , level, department.
    Logic to pick agents( Object and method created ): 
      When workflow starts, it finds department of the initiator.
      For that department-> find approval levels available(L1, L2,  L3).
      For these levels -> Find Agent mentioned for that level.
      Onece Agents are found for all levels -> Pass them to WF  container.
      In task activity, These agents are passed back to the rule and  the task comes to know which agent it should go to.
    Result : Four workflows start in sequence. When last level releases, only 1st workflow shows COMPLETED status. Rest three hang at level 2. If I see Me29N , release for that item is shown completed. To me it seems triggering of only first workflow is enough for release. Is there any way I can avoid trigerring of other three workflows?
    Edited by: User112 User112 on Jan 25, 2008 6:30 AM
    Edited by: User112 User112 on Jan 25, 2008 6:31 AM

  • How to remove "Delegate" option from Reassign Popup page in task details

    Hi
    I'm using SOA 11g and Jdev 11.1.1.3 for the development. I created a Human task and using the Reassign functionality. From the BPM Worklist, When I click the Reassign in the Actions menu, a popup for Reassign task is displayed. In this popup, I have two options -
    1) Reassign (transfer task to another user or group) and
    2) Delegate (allow specfied user to act on my behalf)
    Functionality of option 1 is working fine. But I do not want to show the option 2 in the popup page.
    I tried to find the popup JSPX page and tried to find for any edit options from the BPM Worklist screen, but no luck.
    Can anyone throw some light on how I can achieve this.
    Thanks,
    Udaya Neeliahgari

    Hello,
    create a new permission level. Copy the "Contribute" permission level and call it "Contribute no Delete". Edit the new permission level and untick the "Delete" box in the List Permissions section.
    The next step depends on whether you want this to be site-wide or just for a particular library.
    Go to the Approval Task list and click List Permissions in the List ribbon. 
    Select to break permission inheritance.
    Then select the Sharepoint group that normally has "Contribute" permissions and change the permissions to "Contribute no Delete". To do that, tick the tick box for the group and use the ribbon command to edit permissions for the selection.
    cheers, teylyn

  • How to enable the "Reassign" Option in WorkFlow Notification

    Dear All,
    I have sent a workflow test mail to a user, and that user wanted to reassign the notification to other user, Is it possible,,
    In the same workflow page there is a button "Reassign" option which can able to do this reassign, but its show a error like below
    You may not "Reassign" notification "Workflow Notification Mailer Test in DEV01 - Successful!" because reassign has been disabled.It means reassign is successfully done, but the option is disabled,, is int,, can i enable that option,, ?
    Regards
    HAMEED

    Dear Helios,
    Actually we try to reassign test workflow mail from a user. this mail was sent by sysadmin. And our SCM Functional team trying to set up a reassign process of workflow mailer for their requirement. we tried to test this and reassign by user.
    We will update you once we patched the instance.
    Regards
    HAMEED

  • Duplicate option in workflow

    Hi
    In CA in admin ACC - Workflow- Publishing-commonWorkflow when i have to make changes in that i just right click on it and gave duplicate the workflow but that duplicate option is ter but its just read only mode cant able to duplicate pls help me how to change it....
    Thanks in advance

    You might want to check couple of things: First, in ACC > People and Organizations > Control Center Groups - ensure that your user group has all the required access rights for workflows.
    If all the access rights are fine then make sure that your workflow editor server is configured correctly. Clean up any exiting data from epub_wf_server_id table on the CA database and configure workflow editor server through the Workflow Process Manager’s XML configuration file /atg/epub/workflow/process/workflowProcessManager.xml as below and then restart the CA server.
    <?xml version="1.0" encoding="UTF-8" ?>
    <process-manager-configuration>
    <process-editor-server>
      <server-name>SERVER_NAME:DRP_PORT</server-name>
    </process-editor-server>
    </process-manager-configuration>Where SERVER_NAME would be the name returned by the /atg/dynamo/service/ServerName component's serverName property (typically it would be same as the host name where server is running) and DRP_PORT is the DRP (Dynamo Request Protocol) port as configured in /atg/dynamo/Configuration.drpPort
    Hope it helps.

  • Recommandable Profile Option PO:Workflow Processing MODE (Background/Online

    Hi
    We are using oracle11i 11.5.10.2 on windows 2000 server
    which Value is Recommendable for Profile Option PO:WORK FLOW PROCESSING MODE (BACKGROUND or ONLINE)?
    for PO Approval
    Thanks
    With Regards
    A-Z

    Hi,
    It is advisable to Set "PO:Workflow Processing Mode" profile option to "Background" which is a default value
    If you set it as Online, it completes an entire approval workflow process before letting you proceed to the next activity, but provides you with an updated Status (for purchase orders) as soon as it finishes.
    When this profile option is set to Background, you must start the Workflow Background Engine, which you access through the System/application Administrator responsibility. It is recommended that you set this process to run frequently (Schedule), if you are using it for Background mode approvals.
    /S.P DASH

  • Oracle EBS / MS Outlook Integration Options for Workflow Approvals

    My organization is using Oracle Applications 11.5.10.2 and is currently in the process of upgrading to R12.
    I've recently been asked to investigate and provide options for stream-lining users' ability to respond to workflow notifications from within Oracle Applications, removing the need for users to have to log into Oracle or send an e-mail response to the workflow notification mailer.
    Is anyone aware of any out-of-box mechanisms or 3rd party bolt-on solutions that would achieve this?
    For example, rather than a receiving a workflow notification e-mail asking an approver to log into Oracle to approve a purchase order, time card, recruitment request, or expense report, my business users would like to be able to approve or reject the approval directly from within MS Outlook.
    One option would be to utilize the inbound workflow e-mail processing (e.g. for the user to send a reply e-mail response back to workflow notification mailer), but I'd like to know if there are any other options - such as an add-in within MS Outlook that would prevent the business user from having to send an e-mail response message.
    Greatly appreciate any ideas or suggestions.
    ~Jeremy

    The note id's provided above are very helpful for understanding how to control the two out-of-box mechanisms for responding to approval notifications
    Option 1: Users click on the "Please click here to respond" hyperlink in the e-mail, log into Oracle Apps, and respond to the notification
    Option 2: Users click on the "Accept" or "Reject" hyperlinks provided in the workflow e-mail notification, which creates an response e-mail notification containing the notification_id and response (e.g. accept or reject). The response gets processed by the workflow notification mailer.
    My organization currently uses both both options (option 1 for some approval workflows, option 2 for others), and I'm familiar with how to toggle a particular workflow approval notification between these two options.
    However, my organization wishes to pursue another option that would involve creating a composite application or enterprise application mash-up, accessible within MS Outlook, that would allow an Oracle apps user to see his or her list of open notifications (within Outlook) and respond to the notifications from either Outlook or our corporate intranet web site. We recently implemented an Identity Access Management solution and have a good link established between each LAN (MS Exchange) user account and his or her Oracle Apps user account.
    To my knowledge, there is not out-of-box way to do this and it would require implementing a third-party bolt-on if one exists that would meet this need. Maybe one option would be to create a simple ADF application that would find open notifications in Oracle for the current user and wrap the seeded API's used to respond to the notification.
    Please let me know if anyone else has any feedback or prior experience addressing a similar business need.

  • Format Options in workflow in editor

    Hi,
    I have developed and configured a workflow as per some requirement, in which Send Mail step is included.
    As you know, there would be some text embedded as Mail body, I have written text.
    The problem is, it is a hyper link, and not appearing in a single line. Instead it is running into 2 lines, out of which the first line is displayed as hyperlink and next line is appearing as a normal line.
    What I am trying to do is, decrease the font size or increase the length of line displayed in the mail?
    If my idea is correct, can somebody help me how to decrease the font size or increase in the length of line.
    I prefer the second one.
    For your information, I have used the default paragraph format and size of the font is 0.0pt.
    Can some body help me? Please also give me the procedure to customize the setting of how to change the paragraph settings?
    Thanks in advance,
    suraj kumar

    Hi
    I can't say that I have noticed this happening on any of the systems that I have seen. Can you give any more informations such as which version of Discoverer you have, what operating system you are using and what kind of workbook you are using. Also, are these workbooks that you own or are they workbooks that have been shared with you?
    Best wishes
    Michael

  • Urgent regarding select option

    Hi All,
    Hi All,
    i have lfart(delivery type) field on selction screen defiend as select-option.whenever i click on the multiple selection arrow button besides the lfart field then i n that i have selected "=" as values for opyion field of select-option table(sign,option,low,high).then an icon of "=" is displayed behind the lfart field.
    then i have wriiten a qery like this
    SELECT lfart,lfdat,.....
    INTO TABLE tb_likp
    FROM likp
    FOR ALL ENTRIES IN tb_get_del1
    WHERE vbeln = tb_get_del1-vbeln
    AND lfart IN s2_lfart
    AND lfdat IN s_lfdat,......
    but it is failing(bczo s2_lfart is not initial).then how to write the correct query .
    Thanks&Regards,
    Padma.

    Hi Padma,
    remove the = because of this the Select-option is working as parameter and your select-query is looking for the lfart  = SAPCE in the DB, which it can't found so it is failing.
    Hope it is clear.
    Reward points if useful.
    Regards,
    Atish

  • Hyperlink Option in Workflow Notification

    Hi All,
    I want to put a Hyperlink in Workflow (AR Workflow) notification mail. When the mail will be sent, it should contain the hyperlink of SAP. If enduser will click this hyperlink, it will go to SAP.
    Regards,
    Manoj

    Hi Manoj
           Welcome To SDN!!!!!!!!!....
    Chech the following links..
    www.uisol.com/uisol/papers/UISO-PGandE_Paper_Distributech_2006.pdf
    help.sap.com/saphelp_46c/helpdata/en/c5/e4a930453d11d189430000e829fbbd/content.htm

  • Urgent!! Navigation for workflow

    I need complete navigations  for creating a workflow for Processing Credit Memo Requests.
    thank you in advance.
    with regards,
    vikranth.T

    Khadar,
    Seems you too are workin on Workflow for the first time like me.Go thru the following posts.
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=workflow%20for%20credit%20memo&cat=sdn_all
    All the best
    K.Kiran

  • Please Help - Urgent - Activating an Option under Extras Menu in QE11

    In Transaction QE11 i.e Record Results in QM Module after entering the Inspection Lot no and coming to the screen of the results.
    In the EXTRAS - > Statistics , the option Calculate Statistical Moments is disabled..I want to activate that.
    Is this Possible??
    Please Help..suggestions also will be rewarded.
    Regards,
    Vanessa

    Hi,
    please put the question in correct thread....

  • URGENT-Simulate GOTO option as a button click

    Hi Gurus,
    We would like to JUMP from first query to second query, maintained all the sender and receiver settings in the RSBBS. It is working when we select the characteristic and right click and select GOTO. But the user doesn't want to do the right click and goto.
    He wanted to have that action as a button click. Please help simulating that action as a button click
    Thanks,
    Raj.

    To my knowledge you need a lot of javascript coding in WAD for this for calling the Reciever Report amd passing the variable parameters. because this functionality is not possible through RSBBS

  • Cancel Save Workflow option missing in R17 env

    Has anyone noticed the cancel save option in WF is missing in my R17 env.
    Can anyone confirm if they have it in any of their R17 env ?
    Edited by: Robin7511 on Jun 15, 2010 3:32 PM

    Hi Everyone,
    We were a little surprised by this as well. We had built quite a few CO validations with it and at this time will probably rollback the validations until certification is complete.
    The following is an excerpt taken directly from the June 2010 patch release notes:
    Oracle CRM On Demand
    Release 17
    Patch Release Notes
    1142.0.02
    "Cancel Save option in Workflow exposed on record types other than Opportunity (CR 12-1XVXFX5)
    The Cancel Save feature was released in 1083.0.00 for the Opportunity record type only. It was
    inadvertently exposed on other record types and is not certified by Oracle CRM On Demand. If you
    have already used this feature you will receive the following privilege so you can either roll back the
    use of this feature (recommended) or continue usage at your own risk:
    Privilege Category: Customization: Business Rules
    Privilege Name: Workflow Cancel Save
    Privilege Description: Prevent save operation on 'Before Modified Record Saved' workflow events.
    This privilege is dependent on the Manage Data Rules - Manage Workflow Rules privilege. The
    privilege allows the use of this feature on the following record types:
    1. Account
    2. Activity
    3. Contact
    4. Custom Object 1
    5. Custom Object 2
    6. Custom Object 4
    7. Household
    8. Lead
    9. Revenue
    10. Service Request
    This feature is not supported on any other record types.
    If you have used the Cancel Save feature, and have not received this privilege or the privilege is inactive, the Cancel
    Save section for the above record types:
    - is not visible in the workflow creation page
    - is read-only in the workflow edit and detail pages
    Customers who have not yet used this feature may use it on the Opportunity record type only which is not
    restricted by the above privilege and is certified for all customers.
    Certification of this feature for the record types listed above is currently underway and will be available in a
    forthcoming release."
    ~Jennifer~

  • Payables : Manul Hold workflow notification in R12.1.3

    Hi Everyone....
    We are using R12 version 12.1.3 and below is the requirement in Payables
    Once the Invoice is created, manual HOLD will be applied by the User by opening the Invoice. Business looking for below options
    1. Workflow notification should be sent with HOLD details (business will decide who will receive the notification later)
    2. Notification should have release option and person will fill the release reason and release the manul HOLD via Notification
    3. Business dont want to use AME options here as some existing customization are present in "AP Invoice Workflow"
    Please guide me/throw some suggestion, how to proceed at this point....
    Having some questions....
    1. Is AME a mandatory setup for Payables to have workflow enabled/launched?
    2. In "Holds and Release" form, there is a check box option "Initial Workflow"? If I enable this option for any manual HOLD, will the workflow fires when that particular HOLD applied to Invoice?
    Thanks
    Baskar P

    Dear,
    I am working on the same and would be interested to know what seeded condition would allow to release the invoice Hold? Would appreciate if you could indicate.
    Thank you
    Anatoliy

Maybe you are looking for