How can I open both UDP and TCP ports

Hi,
How can i open both tcp and UDP ports for an IP in Cisco ASA?
Regards
Ejaz

Are you referring to port opening in Cisco ASA to permit certain traffic? I believe the following document should help.
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/acl_overview.html
Adding a Standard Access List
hostname(config)# access-list access_list_name standard {deny | permit} {any | ip_address mask}
Example:
hostname(config)# access-list OSPF standard permit 192.168.1.0 255.255.255.0
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/acl_standard.html
Adding an Extended Access List
access-list access_list_name [line line_number] [extended] {deny | permit} protocol source_address mask [operator port] dest_address mask [operator port | icmp_type] [inactive]
Example:
hostname(config)# access-list ACL_IN extended permit ip any any
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/acl_extended.html
Hope this will help.

Similar Messages

  • BEFW11S4 UDP AND TCP PORT opening

    How do i open UDP AND TCP ports specifically TCP ports: 80, 6667, 28910, 29900, 29920
    UDP ports: 4321, 27900 Its for a networkable game i need to open these ports to play it.

    Ok But when i try disabling the numbers in the forwarding field i run out of spaces in the field to be able to disable them Is there an advanced firewall settings that i dont know about? I put in all of the range forwarding and put the range forwarding start for example 80 originally (TCP ports: 80, 6667, 28910, 29900, 29920
    UDP ports: 4321, 27900) The ones i try to disable i run out of fields to disable them in the forwarding for example there are 10 slots for disabling and Im trying to disable them on two numbers 192.168.1.101. and 192.168.1.100 So i need to disable them for both ip numbers I got 10 fields to enter it into them and 10 x 2 is more than the numbers..... You get me?? and on top of that i dont know if what i did was enough Linksys doesnt want to help me without paying 30 dollars so im just thinking i should buy a new router....... i mean they charge 39 dollars for a new router and they want me to pay 39 dollars for tech support it just doesnt make any sense........

  • How can I print BOTH legal and letter on my duel tray printer????

    How can I print BOTH legal and letter on my duel tray printer from my mac? on a pc you can choose "print according to pdf size" and the mixed document will print in both legal and letter auto-selecting the printer tray.

    Hello CKAY,
    My old printer does not show 8x10 either.
    In the printing preferences under the Paper/Quality tab, do you see a "Custom" option or button? There should be one in there somewhere in your preferences.
    Click on that and create a custom size of 8 in for the width and 10 in for the length. Be sure to "Name" it 8x10 Photo and click ok.
    Now give it whatever attributes you want under the other tabs and click Apply and OK (or just OK).
    Close out the printer and open it again and the new size you created should show in the list.

  • How can I open MWS (Maple) and WXM (wxMaxima) files directly by click on their links, without necessity to save them on my computer? Thanks in advance.

    How can I open MWS (Maple) and WXM (wxMaxima) files directly by click on their links, without necessity to save them on my computer? The links are present at a htm file.
    In the Internet Explorer it works. Mozilla isn't even able to recognize these applications to enable me to select a regime of their handling.

    hello TurZ, please set media.windows-media-foundation.enabled back to its default value and turn '''media.play-stand-alone''' to '''false '''instead.

  • How can i use both Windows and Mac os at the same time on my iMac

    How can i use both Windows and Mac os at the same time on my iMac

    You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

  • UDP and TCP ports

    Hi:
    I have a question. As we know, scanning TCP ports is a lot eaiser than UDP ports because active UDP ports don't respond and there are other reasons as well.
    try{
    Socket soc= new Scoket(address, portnumber);
    catch(Throwable e){ System.out.println(e)}
    look at the code above, it can only tell you active TCP ports for the Throwable e tells you nothing about UDP ports. An active UDP port doesn' respond to the connection call "soc". Therefore it will throw an exception(connection refused) after trying to connect an active UDP port. This exception is just like those of closed TCP ports.
    What i am saying is that active UDP ports will be treated the same as closed TCP ports. They are hidden in closed TCP ports. How do i sift them out? Any solutions?

    I am basically trying to determine how many UDP and TCP ports on a machine are open. Open TCP ports are easy to see. But UDP ports are tricky. Can you please tell me more in detail using a datagram socket?

  • I have paired 2 seperate HMDX Jam wireless speakers.  how can I use both speakers and listen to my ipod at same time?

    I have paired 2 seperate HMDX Jam wireless speakers.  how can I use both and ipod at the same time?

    No, the iPod does not support that.

  • What do i do if my apps on my phone wernt working after i upgraded to icloud but backed up my phone,how can i get both contacts and my pictures back?

    i downloaded the icloud and backed up my iphone,but my apps were not working,so i went back to my origanal settings on the phone,how can i get my contacts and pictures back?

    You deleted the iCloud account?
    If so, connect the iPhone to your computer and sync your Contacts and Photos using iTunes.

  • How can I move both files and ratings to another computer?

    On my desktop, I didn't let iTunes manage my music as my desktop is old and the c drive has limited space. I have backed up the music and I have also saved the iTunes Library.itl and iTunes Music Library.xml files in the hope of being able to transfer my music to my laptop and retain all ratings information I've spent so much time setting up.
    I've copied all music from my desktop to my notebook under the iTunes Music folder. I've also copied the .xml and .itl files. In iTunes I'm happy to see that my ratings info has been preserved but iTunes cannot seem to find my files. I've made sure that my iTunes music folder is correctly set. I've also tried to manually change the g:\ reference for file locations in the xml file but it seems this doesn't help because as soon as I open up iTunes again it sets everything back to the g:\ location. How can I fix this without manually pointing every song to where it now lives on my laptop?
    thanks,
    glen
    PS Even worse is that I tried the consolidate library function on my desktop and now my desktop is in the same boat. Can't find the files unless I manually point to where they are.
    PPS Sorry, originally posted this in the wrong forum.
    thanks,
    glen
      Windows Vista   iTunes 7.1.1

    Hi q8,
    move: select the controls, move them out of the tab container, drag them into the correct page of the tab container
    hide: right-click the controls terminal (!), select "hide"...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How can I download both 720p and 1080p versions of TV shows and movies?

    I have iTunes set to download the 1080p versions of movies and TV shows, but I still have a 2nd generation Apple TV that can only show 720p. How can I setup iTunes to download both HD versions? It also seems that when I have iTunes in the Cloud turned on, it doesn't allow me to redownload any of my HD content again.
    I also need the 720p version because of the older versions of the iPod I still have.

    I ended up getting the proper response from iTunes Support. I forgot to share it with everyone else. Here is how you download both versions of the videos:
    iTunes only lets you download one version of a video at a time. As a work around, I would like you to try the following:
    - Download the 1080p version of the video first
    - Then remove the 1080p version of the video from your iTunes library and save it somewhere else on your computer.
    - Now that you have removed the 1080p version go to the iTunes > Preferences > Store
    - Change the HD version "when downloading HD videos, prefer."  to  720p
    - Go to purchase page, the 720p version should download.

  • How can i use the SNMP and TCP/IP together in Labview?

    I want to use the SNMP and TCP/IP together in the Labview to communicate between the two computers, If anyone know about it , please write back.
    Santosh Chavan
    IIT MADRAS.

    You can use LabVIEWs UDP functions to communicate with SNMP devices. The tedious part is converting the MIB information into the required hex message.
    There is also a problem in using the UDP functions on port 161 (default SNMP port) if the Windows SNMP services is running.

  • How can I open a vi and show the block diagram?

    Hi,
    I am opening an vi using "Open VI Reference" and "Invoke Methodpen FP", but I want to open the vi and show the block diagram, but I haven´t found any method (Invoke Method) to do that and any property.
    Any idea?
    Thanks!
    Gracinda

    OK, I can come up with a reason.  I have written a program that will search the entire VI Hierarchy of a program and update all of the descriptions for all VIs with the top level program part #, the name of the top level program that the VI is used in, the company copyright info, the ITAR notice, company address, the name of the engineer performing the update, along with the date and time.  This will also place as a background image on all the VIs, a watermark of the company name, legality stuff and the copyright. It works very slick in that if there are thousands of sub-vis, such as what I'm working on now, it goes through all of them, makes sure the data is there as per company policy without having to open every one of them look at them and update or not whichever the case may be. The one portion that is tough is that the program will detect if there is a description written about what funtion the VI performs and if there is not a description, then it pops up a dialog requesting the user to write a description. The problem is that without looking at the block diagram for the VI, it can be nearly impossible to write a description for the functionality of the VI. So is there a way to programmatically open a VI, show its block diagram (this would only be in the case of a missing description) and then upon completion of the updates, close the block diagram? (I already open and close the VI programmatically in order to read the VI DESC and update as needed, but that is in the background and of course you can't see the block diagram).
    Thanks,
    Dan

  • HT3562 A lot of people are bilinguals living in the USA. How can I use both English and Cantonese in all the apps

    In the USA, there are a lot of bilinguals. Being Chinese and live in the USA, there are millions of people speak both English and Cantonese. There are no way in the OS that I can set it up to recognize both at the same time. I have added the international keyboard of English and Chinese. The default for Chinese Voice command when I switch from English. There is no way in OS that I can link the Chinese input in Keyborad Language to Cantonese. All the default of Keyboard input are link to Madarin.
    Apple should make the change in the next OS that can link a keyboard language to different dialect for Chinese Language

    DrSQL wrote:
    Apple should make
    For them to see your request, you need to repost it at
    http://www.apple.com/feedback

  • Maximum # of UDP and TCP port Mappings

    Does anyone know for sure the total number of port mappings you can create on the airport extreme?
    Thanks

    Ok But when i try disabling the numbers in the forwarding field i run out of spaces in the field to be able to disable them Is there an advanced firewall settings that i dont know about? I put in all of the range forwarding and put the range forwarding start for example 80 originally (TCP ports: 80, 6667, 28910, 29900, 29920
    UDP ports: 4321, 27900) The ones i try to disable i run out of fields to disable them in the forwarding for example there are 10 slots for disabling and Im trying to disable them on two numbers 192.168.1.101. and 192.168.1.100 So i need to disable them for both ip numbers I got 10 fields to enter it into them and 10 x 2 is more than the numbers..... You get me?? and on top of that i dont know if what i did was enough Linksys doesnt want to help me without paying 30 dollars so im just thinking i should buy a new router....... i mean they charge 39 dollars for a new router and they want me to pay 39 dollars for tech support it just doesnt make any sense........

  • How can I open two sites and view each side by side in a seperate window?

    What is correct procedure to open and view two windows at the same time?

    You can do that in different ways.<br />
    You can open two window or tear off one tab to a new window (right-click a tab: Move to New Window) and resize both windows as you like.
    You can also use an extension.
    *Fox Splitter: https://addons.mozilla.org/firefox/addon/fox-splitter/
    *Split Pannel: https://addons.mozilla.org/firefox/addon/split-pannel

Maybe you are looking for