How can I open MWS (Maple) and WXM (wxMaxima) files directly by click on their links, without necessity to save them on my computer? Thanks in advance.

How can I open MWS (Maple) and WXM (wxMaxima) files directly by click on their links, without necessity to save them on my computer? The links are present at a htm file.
In the Internet Explorer it works. Mozilla isn't even able to recognize these applications to enable me to select a regime of their handling.

hello TurZ, please set media.windows-media-foundation.enabled back to its default value and turn '''media.play-stand-alone''' to '''false '''instead.

Similar Messages

How can I open both UDP and TCP ports

Hi,
How can i open both tcp and UDP ports for an IP in Cisco ASA?
Regards
Ejaz

Are you referring to port opening in Cisco ASA to permit certain traffic? I believe the following document should help.
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/acl_overview.html
Adding a Standard Access List
hostname(config)# access-list access_list_name standard {deny | permit} {any | ip_address mask}
Example:
hostname(config)# access-list OSPF standard permit 192.168.1.0 255.255.255.0
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/acl_standard.html
Adding an Extended Access List
access-list access_list_name [line line_number] [extended] {deny | permit} protocol source_address mask [operator port] dest_address mask [operator port | icmp_type] [inactive]
Example:
hostname(config)# access-list ACL_IN extended permit ip any any
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/acl_extended.html
Hope this will help.

How can I completely remove iTunes and all associated files/programs from my Windows PC?

How can I completely remove iTunes and all associated files/programs from my Windows PC?

iTunes, along with Quick Time, iCloud, Apple Software Update, Bonjour, Apple Mobile Device Support and Apple Application Support can all be removed from your PC by uninstalling them using 'Uninstall or change a program' in Control Panel. The only obvious thing that will be left behind is your iTunes library which remains untouched. If you want to remove that as well it's just a question of deleting it.
Hope that helps.

How can I forward a mail to multiple mail accounts that I have in a group without having to add them one by one?

How can I forward a mail to multiple mail accounts that I have in a group without having to add them one by one?

I don't think that you can. Yahoo's basic email features do not include mail forwarding.

Can TestStand open, read, write and close binary files?

From a TestStand sequence, I need to open, read, write and close binary files. Does TestStand support this capability?

Christine -
In the past I have used the C/C++ Adapter to call directly into the CVI RTE functions. The CVI functions I have used are OpenFile, WriteFile and CloseFile. The functions are exported from the DLL as CVI_OpenFile, CVI_WriteFile, and CVI_CloseFile. I just had to make sure that on termination of the sequence, that the integer handle was properly released by calling the close function.
If you are using LabVIEW, you could call directly into the low level VIs to do a similar set of operations.
Scott Richardson (NI)
Scott Richardson
National Instruments

How can I open a vi and show the block diagram?

Hi,
I am opening an vi using "Open VI Reference" and "Invoke Methodpen FP", but I want to open the vi and show the block diagram, but I haven´t found any method (Invoke Method) to do that and any property.
Any idea?
Thanks!
Gracinda

OK, I can come up with a reason. I have written a program that will search the entire VI Hierarchy of a program and update all of the descriptions for all VIs with the top level program part #, the name of the top level program that the VI is used in, the company copyright info, the ITAR notice, company address, the name of the engineer performing the update, along with the date and time. This will also place as a background image on all the VIs, a watermark of the company name, legality stuff and the copyright. It works very slick in that if there are thousands of sub-vis, such as what I'm working on now, it goes through all of them, makes sure the data is there as per company policy without having to open every one of them look at them and update or not whichever the case may be. The one portion that is tough is that the program will detect if there is a description written about what funtion the VI performs and if there is not a description, then it pops up a dialog requesting the user to write a description. The problem is that without looking at the block diagram for the VI, it can be nearly impossible to write a description for the functionality of the VI. So is there a way to programmatically open a VI, show its block diagram (this would only be in the case of a missing description) and then upon completion of the updates, close the block diagram? (I already open and close the VI programmatically in order to read the VI DESC and update as needed, but that is in the background and of course you can't see the block diagram).
Thanks,
Dan

I'm running Final Cut Express 2. How can I move entire project and application from one internal hard drive to another? Ran out of space on one drive. Thanks.

I'm running Final Cut Express 2. My video project is 95% done and I've run out of space on my 500g internal hard drive. How can I (1) move the complete FCE program and video to my unused 250g internal hard drive and operate it from there and (2) how do I then purge all the FCE info from the 500g drive without losing anything from the 250 drive?
Also, is it possible to change the aspect ratio from 4:3 to 16:9 when the project is finished? If so, how? I now know this all should have been done before I started. Thanks for the help.

1. You can't move the application. It must remain on the system drive. Move your capture scratch folder to the external FireWire drive and use the reconnect function in the project.
2. What's the media 16:9 or 4:3?

How can I import a video and play on Flash with a click of a button?

Basically I want to create a set of animation sequences on Maya and import them to Flash as avi or flv and then play the movie clip after a button is clicked, how can I do this?
My idea is to create a multiple choice interactive game where the user has to select the right choices to get to the right ending which is why I need to know how to link buttons to movie clips and be able to stop them at the right time with more buttons and text being displayed for the next set of movie clips.
Also after the video is done being played do I just put a stop(); at the end of the Actionscript so the video stops and the choices (text) appear on the screen for the next video sequences?
I know how to link a button to a scene or frame but I don't know how to link a button to a video or many video/movie clips....
Thank you
Also I may have other questions just pop into my head so if I edit and repeat a lot I'm sorry...

Thanks but what if the clips are long and quite big in size?
Put all he files separately from flash in the same folder as your swf and let the FlvPlayback Component load them when needed.
Can I play a movieclip basically by the press of a button???
Yes
and does it have to be flv or can it be avi?
you can use flv or f4v (f4v is recommended if the files are really long (+10 Minutes) no avi, mov or other container

How can I enter time machine and recover my Files.

I recently had to take my imac in for the seagate replce issue that Apple had, and recieved my machine back with a new drive and OS on it. When I plug in my external drive with my backed up time machine files, I am still unable to enter time machnie and recover the files. Please experts give me some help.

See Pondini's TM FAQs for starters.

How can I open previous windows and tabs in safari 5.1.7 running OX S 10.6.8

Hi everyone,
I format my Mac today and previsously save the safari folder from library so I have all the bookmarks and other stuff. After install OX S I copy the folder again but now when I open safari the previous tabs and windows didn't open automatically like I always have it. I know I can just click History and then reopen all windows from last sessions but is there any away to do it automatically (when I open safari). I am running snow leopard 10.6.8 and safari 5.1.7.

I'm not sure why creating a new user account or guest user account would help.
Because it may help in the diagnosis of your problem.
Seems like others are having the same problem
I have never seen this problem mentioned before.

How can I open two sites and view each side by side in a seperate window?

What is correct procedure to open and view two windows at the same time?

You can do that in different ways.<br />
You can open two window or tear off one tab to a new window (right-click a tab: Move to New Window) and resize both windows as you like.
You can also use an extension.
*Fox Splitter: https://addons.mozilla.org/firefox/addon/fox-splitter/
*Split Pannel: https://addons.mozilla.org/firefox/addon/split-pannel

I am unable to open my current LR catalog. How can I take a .CR2 and. .xmp file to create a .jpg?

I work off my external hard drive. I am still able to access all files on the hard drive, however they are all .CR2 files and .xmp. I'm trying to take the files and create a .jpg. What is the easiest way to go about this?
HELP!

What happens that you cannot open the catalog??

I've locked my Ipad by repeatedly entering the wrong security password. How can I open it again and now I think I've remembered the right number?

I've locked my self out of my ipad by repeatedly entering the wrong password. What can I do to reopen it again please? I think I have the right number now too>
John.

Wrong Pass Code > http://support.apple.com/kb/HT1212

How can I open two tabs and see two windows side by side at the same time?

The instruction I found on the web about using | between web addresses did not work. I have a Mac. Thanks.

The | character is typically used when creating multiple home pages. If you want two tabs displayed at the same time, you can try the [https://addons.mozilla.org/en-US/firefox/addon/4287/ Fox Splitter] add-on.

How can I make waveform graph and/or excel file with two different dynamic DBL values?

As the question describes, I have two dbl sources from a load cell and linear actuator (from firgelli). I want to make a load/displacement curve from the force readings from the load cell and the displacement readings from the linear actuator. The load cell outputs an analog signal that can be acquired by a DAQ and the actuator comes in with a board and VI program to control the speed and measure the displacement of the actuator to a sample rate of my choosing. Is there a way that I can make a VI where it continues to collect data and construct the graph I'm looking for?
Solved!
Go to Solution.

A couple points about your application:
1. Synchronization. Since you're ultimate goal is a stress/strain curve, it is vital that your force and displacement data be synchronized appropriately. If your sampling is beyond a few times a second, this is not really possible without some form of hardware synchronization via either a trigger and/or sample clock. Two NI DAQ boards can be synchronized this way easily, but it seems you're using 3rd party hardware for one of these processes. Would need to know more about that board to know what options you have. You could specify what your resolution is in distance, and how fast the article will be moving, to get an idea of how fast to acquire, and how well you'll need to synchronize the data. Another option, since it appears each data stream will be sampled on a hardware-timed sample clock, they will be offset in time, but not skewed during the acquisition. You may be able to identify a feature in the data set common to each and use that to remove the timing offset after the process is completed.
2. Display. To display data during the acquisition process, I usually recommend at least one display that plots vs. time. Much easier to spot irregularities with the acquisition process that way. However, if you'd like to also plot force vs. displacement, you can use an XY Graph to plot parametrically. For Example, in your case you would use the Displacement data as the X coordinates, and the Force data as the Y coordinates.
3. Saving data to file. I would recommend using the Save to Spreadsheet File.vi (File IO pallette) to save your data. If you use a comma as the delimiter, and save the file with a *.csv extension, you will have a file that is easily read into excel. The standard tab-delimited spreadsheet file is also fine, it will just require an extra step to read it into excel to specify to excel what the delimiter is.
4. Batch vs. Real-Time Recording (Data File). If your process is short (< 30 sec) you may be better off acquiring the data, Storing it locally to the VI (Array - usually maintained in a shift register), and then writing the file with a header (acquisition parameters, test article information, data column headers) and the data all at once in batch mode to the file after the process is finished. If, however, it is longer than that you would be better off starting a data file with a header and appending the data to the file as you go, so that if something happens during your test, you at least have data up to that point.
Hope this Helps,
Kurt

How can I open MWS (Maple) and WXM (wxMaxima) files directly by click on their links, without necessity to save them on my computer? Thanks in advance.

Similar Messages

Maybe you are looking for