How Can I Replace a Value

Hi guys,
Perhaps, you can help in this query,
SELECT Br FROM crm where project = :P2_Project
:P2_Project : is " a value in a list of values Item" that contains X, Y, Z
Only if the value "X" is picked, then It should be replace for another value such as "A"; then it should be compared against the values of the project column.
How can I perform that task...? I hope my question is clear.....
Best Regards,
Fateh

Hi,
What you posted is equivalent to:
SELECT distinct
     br
FROM      crm
where      project = CASE
               WHEN  :P2_PROJECT IN      
                    ( 'ET-H'
                    , 'ET-B'
                    , 'ET-C'
                    , 'ET-D'
                    , 'ET-E'
                    , 'ET-F'
                    , 'ET-J'
                    , 'ET-K'
                    , 'ET-M'
                    , 'ET-L'
               THEN  'ET'
               ELSE  :P2_project
           END
;It's a little less coding, and (I think) clearer.
In Oracle 10 (and up) you can do this, too:
SELECT distinct
     br
FROM      crm
where      project = CASE
               WHEN  REGEXP_LIKE ( :P2_PROJECT
                           , '^ET-[HBCDEFJKML]$'
               THEN  'ET'
               ELSE  :P2_project
           END
;but, if the list of values ever changes so that it won't follow such a clear pattern, then it might be harder to maintain.

Similar Messages

  • How can I replace column value with a particular value in SQL

    Hi All,
    Can anyone please tell me how can I format my output with replacing a column value with a specific value which actually depends on the present value of the column
    I am executing the following SQL statement
    select state,count(id) from <table_name> where composite_dn= <composite_dn_name> group by state;
    My Present output is:
    State No.Of Instance
    1 3
    3 28
    I want to replace the value in the column state as follows
    State No.OfInstances
    Completed 3
    Faulted 28
    I want "1" to be reppaced by "Completed" and "3" to be replaced by "Faulted"
    Is is possible with SQL or PL/SQL , if it is then how can I achieve this required result. Please help!!
    Thanks in Advance!!
    Edited by: Roshni Shankar on Oct 27, 2012 12:38 AM

    Hi Roshni,
    I guess this CASE clause can be simulated by a DECODE and also it is very easy to use.
    Refer -- http://www.techonthenet.com/oracle/functions/decode.php
    select decode(t1.state,t2.state_id,t2.state_name), t1.count_id
    from <table_2> t2, (select state,count(id) count_id
    from <table_name>
    where composite_dn= <composite_dn_name>
    group by state) t1
    where t1.state = t2.state_id;HTH
    Ranit B.
    Edited by: ranit B on Oct 27, 2012 2:02 PM
    -- link added
    Edited by: ranit B on Oct 27, 2012 2:19 PM
    -- sample code added

  • How Can I replace newScale Text Strings with Custom Values?

    How Can I replace newScale Text Strings with Custom Values?
    How can I replace newScale text strings with custom values?
    All  newScale text is customizable. Follow the procedure below to change the  value of any text string that appears in RequestCenter online pages.
    Procedure
    1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
    a) Navigate to the RequestCenter.ear/config directory.
    b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
    c) Save the file.
    d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
    e) Stop and restart the RequestCenter service.
    f) Log  in to RequestCenter and browse to the page that has the text you want  to overwrite. In front of the text you will now see the String ID.
    g) Note down the String ID's you want to change.
    2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
    3. Create the following sub-directory: res/resources
    4. Create the following empty text files in the directory you just created:
    RequestCenter_0.properties
    RequestCenter_1.properties
    RequestCenter_2.properties
    RequestCenter_3.properties
    RequestCenter_4.properties
    RequestCenter_5.properties
    RequestCenter_6.properties
    RequestCenter_7.properties
    5. Add the custom text strings to the appropriate  RequestCenter_<Number>.properties file in the following manner  (name-value pair) StringID=YourCustomTextString
    Example: The StringID for "Available Work" in ServiceManager is 699.
    If you wanted to change "Available Work" to "General Inbox", you  would add the following line to the RequestCenter_0.properties file
         699=General Inbox
    Strings are divided into the following files, based on their numeric ID:
    Strings are divided into the following files, based on their numeric ID:
    String ID  File Name
    0 to 999 -> RequestCenter_0.properties
    1000 to 1999 -> RequestCenter_1.properties
    2000 to 2999 -> RequestCenter_2.properties
    3000 to 3999 -> RequestCenter_3.properties
    4000 to 4999 -> RequestCenter_4.properties
    5000 to 5999 -> RequestCenter_5.properties
    6000 to 6999 -> RequestCenter_6.properties
    7000 to 7999 -> RequestCenter_7.properties
    6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
    7. Restart RequestCenter.
    Your customized text should be displayed.

    I've recently come across this information and it was very helpful in changing some of the inline text.
    However, one place that seemed out of reach with this method was the three main buttons on an "Order" page.  Specifically the "Add & Review Order" button was confusing some of our users.
    Through the use of JavaScript we were able to modify the label of this button.  We placed JS in the footer.html file that changes the value of the butt

  • How can I set a value of column in SSIS by using Replace

    How can I set a value of a column in SSIS using a Replace in Derive columns. I have here NameCode and I need to Set = 1 Where NameCode like LIKE '____99____'
    eg. 1006993010... if 5th and 6th characters are 99
    Else 0
    Hope to hear from someone soon and I appreciate great help here.

    If NameCode column is integer then you have to cast it correctly to String.
    I am adding that to the expression provided by Rajen.
    SUBSTRING((DT_WSTR,20)ProductCode,5,2) == "99" ? 1 : 0
    -Vaibhav Chaudhari

  • How can I return multiple values with PL/SQL Web Services

    Hi,
    I'm new to developping Web Services. I'm doing some tests with JDeveloper and OC4J on my local machine with a Web Services based on a PL/SQL function within a package. Right now that function only returns one value. So the xml response only has one output.
    I'd like to know how can I return multiple values with my PL/SQL Web Service. For example, if I want to return an employee's name and id? And that the xml contains two output : <employee>, <empid>?
    Reginald
    ps : I have searched the forum and I couldn't find an answer to this question, if that has been discussed AND answered before, can you please post the link? Thanks

    Alright, I actually found my answer. Since this was asked I think as a followup somewhere else I'll give my answer.
    It is very simple, all you have to do is create an Object Type and then Return that object type. After that, JDeveloper will take care of everything and you will have an xml response with multiple values. Here
    {color:#ff0000}
    create or replace TYPE person AS OBJECT
    ( id_interv number,
    first_name VARCHAR2(50),
    last_name VARCHAR2(50),
    date_birth date
    );{color}
    Then your function used in your Web Service should look something like this :
    {color:#ff0000}
    function info_emp (p_empno IN VARCHAR2) RETURN person AS
    l_emp person := person(-1,'','','');
    BEGIN
    SELECT first_name
    ,last_name
    ,emp_no
    INTO l_emp.first_name
    ,l_emp.last_name
    ,l_emp.emp_no
    FROM emp
    WHERE upper(emp_no) = upper (emp_no);
    {color}
    {color:#ff0000}
    RETURN l_emp;
    EXCEPTION WHEN NO_DATA_FOUND THEN
    l_emp := person (-1,'n/a','n/a','n/a');
    RETURN l_emp ;
    END info_emp;{color}
    {color:#ff0000}{color:#000000}After that, this is what the xml response looks like :{color}{color}
    &lt;first_name xsi:type="xsd:string"&gt;John&lt;/first_name&gt;
    &lt;last_name xsi:type="xsd:string"&gt;Doe&lt;/last_name&gt;
    &lt;emp_no xsi:type="xsd:string"&gt;0250193&lt;/emp_no&gt;

  • Hi, how can i break the value for a row and column once i have converted the image to the array?????​??

    Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
    At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've  tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
    Please help me!
    For your information, I'm using LABView 7.0.

    Hi,
    Thanks for your reply.Sorry for the confusion.
    I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
    Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
    I hope that I have made the problem clear. Sorry if it is still confusing.
    Hope you can help me. Thank you!!!!
    Attachments:
    arrayrowncolumn2.JPG ‏64 KB

  • How can i show a value into a MessageStyledText

    Dear all,
    Suppose i have a value in a variable i.e. number=10;
    how can i show this value into a MessageStyleText when page loads.
    please suggest.

    Gyan wrote:
    Mofizur,
    Get the value from the variable & Use the below code in PR.
    OAMessageStyledTextBean processCodeBean = (OAMessageStyledTextBean)webBean.findChildRecursive("<Replace with Bean Id>");
    if(processCodeBean!=null)
    processCodeBean.setText(pageContext,null);
    }Regards,
    GyanString employeeNumber = "10";
    processCodeBean.setText(pageContext,employeeNumber);
    OR
    processCodeBean.setValue(pageContext,employeeNumber);
    Thanks
    --Anil                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • How can i get all values from jtable with out selecting?

    i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
    Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
    thanks in advance.
    raja

    You could set the table's data model to be the same:
    output2.setModel( output1.getModel() );

  • How can I pass field value betwen view in ICWC?

    Hi experts,
    I am new to this BSP programming. I have some requirements to modify standard ICWC in CRM 5.0
    Hope can get some advices and helps here.
    I have added a new field called <status> to context note SEARCHCUSTOMER in BupaSearchB2B view and also the same field name to context note CUSTOMER in BupaCreate view.
    I have added the field into both the HTM views and able to execute thru WebClient. However, I have one problem in passing the <status> value from BupaSearchB2B view  to the BupaCreate view when I click on the 'create' button.
    I do search and saw this thread How can I pass field value beetwen view in IC Web Client? , but i cant figure out how it works.
    Do I need to create the field <status> to context note CUSTOMER in BupaSearchB2B? Currently the context note does not have any attributes.
    Really appreciate for any help.
    Edited by: mervyn tay on Apr 7, 2009 11:42 AM

    solved by myself...
    code in the CREATE_ACCOUNT method.
            ev_entity->set_property( iv_attr_name = 'ZZICNO'
                                     iv_value = lv_icnum1 ).

  • How can I get command values from a VI executed by reference ? NEWBIE

    Hi,
    I'm running a sub-vi in a "Secondary Front Face" (excuse for the
    translation if not correct, I'm working on a French version). In order
    to run this VI, I pass a reference. All is working fine but I don't
    know how can I get the values entered by the user in this VI ?
    Actually I run a main VI wich contains a "Secondary Front Face" (this
    SFF is contained in a tabbed pane). In my diagramm, I pass a reference
    to another VI (by the name of the file *.vi). If my user enter a word
    in a text field, I would like to be able to get it in my main app.
    Thanks for your help.

    Hello,
    You might take a look at the following tutorial for more information about calling a VI by reference. It's got some great visuals and examples.
    Tutorial: Calling a VI by Reference
    You might also consider just calling the secondary VI as a simple subVI, if you can spare the memory space when loading the main application, as this is the easiest way to input and output VI values.
    I hope this helps! Please let me know if I can be of any further assistance.
    Liz F
    National Instruments

  • Is there any way to replace my iphone 5. The back camera is not working. Since there's no apple store here in the philippines. How can i replace it?

    How can i replace it?

    You probably do in NZ ..................
    The Apple iphone warranty is not and never has been from the very first iPhone, international
    Sorry but you were stitched up

  • How can I get the value of "Warehose" column in a form

    How can I get the value of "Warehouse" column in the form below (I mean what table that contain this value):
    Production Supervisor >> Batches >> (Button) Material Details >> (Button) Line Allocations
    Well, for more clearly! My problem is I must have the Unit Cost of Items, so I've got it in the cm_cmpt_dtl (table), but if I want to, I must create a relation that require 2 filed, they're Item_ID and Whse_Code.
    There's no problem with Item_ID, but Whse_Code seem to be the Mission Impossible (hix, I hate that film!!!!)
    I wonder if It was right to post this topic here. But anyway I just post my question here, hope I could get some help.

    wow, many, many, many.... and many thanks!
    Just add a tiny modify to check out the Batch_type
    doc_id = (select batch_id from gme_batch_header where batch_no='&batch_number' and batch_type = 0)
    Because the batch_no can be duplicated as we also create Batch and Filrm Planned Order.
    Many thanks for your support!
    P/S: Sorry for my terrible English :P

  • How can I pass a value into a page fragment?

    How can I pass a value into a page fragment?
    I am implementing four search screens. And the only thing different about them will be their backing bean.
    So I’d like to do something like have four pages, each which retrieves its appropriate backing bean, sets that bean to a variable, and then includes a page fragment which contains the generic search page code (which will make use of that variable).
    The code in the four pages would be something like this:
    <?xml version='1.0' encoding='windows-1252'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
    xmlns:c="http://java.sun.com/jsp/jstl/core">
    <jsp:directive.page contentType="text/html;charset=windows-1252"/>
    <c:set var="searchPageBackingBean"
    value="#{pageFlowScope.employeeSearchPageBean}"
    scope="page"/>
    <jsp:include page="./SearchPageBody.jsff"/>
    </jsp:root>
    At this point, what I’m seeing is that the fragment page, SearchPageBody.jsff, has no visibility of the searchPageBackingBean variable, either referencing it as #{pageFlowScope.searchPageBackingBean} or just #{searchPageBackingBean}

    The following will work, assuming you are needing to access a managed bean:
    Put this in the parent page:
    <c:set var="nameOfSearchPageBackingBean"
    value="employeeSearchPageBean"
    scope="request"/>
    Put this in the child, SearchPageBody.jsff:
    <c:set var="searchPageBean"
    value="#{pageFlowScope[nameOfSearchPageBackingBean]}"
    scope="page"/>

  • How can i replace my new iPad mini to ipad air

    how can I  replace my new iPad mini to a new iPad air online

    If you bought the Mini within the past 14 days you can get a refund and buy the Air. Take it to an Apple store.
    Otherwise.......
    Your only option is to sell the iPad and buy a new one.
    Apple Reuse and Recycle Program
    http://store.apple.com/us/browse/reuse_and_recycle
    How to Sell Your Old iPad  http://tinyurl.com/85d69lk
    Other sources to sell.
    eBay Instant Sell http://instantsale.ebay.com/?search=ipad
    Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
    For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
    Sell Electronics for Cash - Next Worth  http://www.nextworth.com/
    Buy My Tronics  http://www.buymytronics.com/
    Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
    Totem http://www.hellototem.com/
    How To Sell Your Old iPad: 5 Places To Trade In Your Old Device
    http://www.huffingtonpost.com/2013/11/05/ipad-trade-in_n_4218964.html
    THIS IS VERY IMPORTANT - What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5661
     Cheers, Tom

  • How can I replace an administrators account?

    I have an older Powerbook G4 laptop that someone else would like. How can I replace the adminsitrator's account?

    Hi Bob,
    2 ways to go...
      1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
       2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
          *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
       3. Click the Erase tab.
       4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
       5. Select your Mac OS X volume.
       6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion do a new install.
    Or...
    Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
    In the same pref pane highlight your old account, click the little minus icon, then use Disk Utility to Secure Erase Free Space.

Maybe you are looking for

  • Macbook Air freezes

    I have a 2-month-old Macbook Air that periodically freezes.  I am working along in MS Office and all of a sudden the screen freezes, sometimes I can still move the cursor, sometimes not, but nothing is clickable on the screen and the keyboard also do

  • What is the best way to job hunt?

    First of all, relax and take a breath. You can do this, and we're behind you. :)So you want to get back into infrastructure... You'll be please to know that nothing has changed. Sure technology is a bit different now, but understanding people, buildi

  • Extracting certain files from a jar

    I am creating a jar that when d-clicked on will extract its files to the computer the jar resides on. Here is my question: how do I get it to only extract certain files(ie. all files except the classes used to give the extraction command upon d-click

  • Surface Scan Fail (TechTool Deluxe)

    I thought my problem was fixed, but apparently not... my PowerBook works when I first boot it up, but as I use it for a while (or close it and re-open it), things start freezing. Sometimes it can't find my AirPort connection, either. Anyway, I ran th

  • Dynamic users group

    Looking for a cleaner solution to applying user policies, based on OS. I have user groups that may be running either XP and Win7. At the moment I specify a filter for the OS in each individual policy. Each policy is in a policy group say 'Admin Win7