How can i show a value into a MessageStyledText

Dear all,
Suppose i have a value in a variable i.e. number=10;
how can i show this value into a MessageStyleText when page loads.
please suggest.

Gyan wrote:
Mofizur,
Get the value from the variable & Use the below code in PR.
OAMessageStyledTextBean processCodeBean = (OAMessageStyledTextBean)webBean.findChildRecursive("<Replace with Bean Id>");
if(processCodeBean!=null)
processCodeBean.setText(pageContext,null);
}Regards,
GyanString employeeNumber = "10";
processCodeBean.setText(pageContext,employeeNumber);
OR
processCodeBean.setValue(pageContext,employeeNumber);
Thanks
--Anil

Similar Messages

How can I pass a value into a page fragment?

How can I pass a value into a page fragment?
I am implementing four search screens. And the only thing different about them will be their backing bean.
So I’d like to do something like have four pages, each which retrieves its appropriate backing bean, sets that bean to a variable, and then includes a page fragment which contains the generic search page code (which will make use of that variable).
The code in the four pages would be something like this:
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
xmlns:c="http://java.sun.com/jsp/jstl/core">
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<c:set var="searchPageBackingBean"
value="#{pageFlowScope.employeeSearchPageBean}"
scope="page"/>
<jsp:include page="./SearchPageBody.jsff"/>
</jsp:root>
At this point, what I’m seeing is that the fragment page, SearchPageBody.jsff, has no visibility of the searchPageBackingBean variable, either referencing it as #{pageFlowScope.searchPageBackingBean} or just #{searchPageBackingBean}

The following will work, assuming you are needing to access a managed bean:
Put this in the parent page:
<c:set var="nameOfSearchPageBackingBean"
value="employeeSearchPageBean"
scope="request"/>
Put this in the child, SearchPageBody.jsff:
<c:set var="searchPageBean"
value="#{pageFlowScope[nameOfSearchPageBackingBean]}"
scope="page"/>

How can we show selected values of a tree in a selectmanylistbox

how can we show selected values of a tree in a selectmanylistbox??

Hi,
you can use a reference to a RichTree component instance and call getSelectedRowKeys on it. The selected rowKey then allow you to look-uo the nodes in the tree. You can use a custom selection listener on the tree to be notified about each selection. There also is an API for the de-selected row keys, which you need to remove nodes from the select many list. The select many list will get its data from a managed bean in view scope (so the values survive subsequent requests)
Frank

How can I pass parameter value into first form?

hello all
I have one form called logon.fmx
I have parameter in that form called "common_home".
when I run that form browser I need to trasfer the value for parameter "common_home".
how can I do this?
From
Chirag Patel

Hi all
1) I am used to config='myconfig' in my application to run the application from browser.
2) in formsweb.cfg I have add one more parameter like as follows
otherparams=common_home=c:\chirag\erp
3) you can add n number of user defined parameter here.
it is working fine.
From
Chirag Patel

How can I show a value according to the position of the mouse arrow ?

Hi Everyone,
I am changing the color of the background of some indicators according to temperature measures. Each background is linked to one temperature. I would like to show the value of a temperature when passing the arrow of my mouse over the indicator. I don't want to over charge the Front Diagram with all of the temperatures.
Is this possible? The temperature could appear in a unique and fixed indicator, or linked to the arrow,...
Any help would be great,
Thanks,
User
Solved!
Go to Solution.

Hi Ravens and Dan,
Thanks for your answers.
Ravens, I would rather not use the arrow position because I need to do this overs 100 indicator, and that would be a bit long. Added to that if I need to change the positions of the indicators (whch I will) that would mean to redefine the positions of the indicators....But perhaps your solution is the only possible?
Dan, I have taken out and simplified the piece of my program. Setting the value of the indicator to transparent except when the mouse is over the indicator could be an example of presentating the values but I still don't know how to this (without having to define the position of each box)
Thanks again
User
Attachments:
forum 14 02 10.vi ‏9 KB

How can I insert a value into the Oracle Date column using JDBC?

Suppose I have a table TEST created by "create table TEST (c1 INT, c2 Date);"
Now I want to insert some proper value into the table TEST's column c2. I couldn't do that by TRYing using Java.sql.Date, Java.Util.Date, Java.String.
Could anyone give me some suggestions by providing the sample code?
Many thanks for your help!
Wendy

What about building the java string:
"Insert into test (c1,d1) values ("+
Integer.toString(var)+
", TO_DATE("
formatYourDateVariableWithCalendarMethods
",'DD-MON-YYYY')"
and executing it ??

Can I show many values into Radar Chart?

I I have this chart
!http://img59.imageshack.us/img59/1282/radar2.png!
I like to show diferentes values for all rows.
This next image it´s create with MsPaint :p
!http://img24.imageshack.us/img24/7899/radarm.png!
i don´t want (<MarkerText visible="true" markerTextPlace="MTP_CENTER"/> ).
I want to same this second image, it is posible, what is the parameter?
thanks

Hi Benito
sadly that is not supported.
Tim

How can we show data in rows when it is in Columns........

I have strucked with a simple but a complex problem.
I have a Report with data in vertical rows..need of the hour is how can we show that data into column structure.
here is the table sample which i have in Database..
Location      chrg_type    Effective_date
xxxxxxx        xxxx          xx-xx
thhis is the structure in effective date we have several months in it in a single column i want show the effective date or effective month in various columns instead of a single column.
my required table is....
                            Effective_date     Effective_date
Location      chrg_type     xx-xx              xx-xx
xxxxxxx        xxxx          xx-xx
any tough heads?????

Hi Sunil,
Your 1st problem is that you are going to need one more field to accomplish you goal. What type of data do want under your new date columns?
Anyway, once you have that you need to move on to how to move the data out into columns based on date.
Try something like this.
0_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',CurrentDate) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',CurrentDate)
THEN {tbl.DataField}
1_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -1, CurrentDate)) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -1, CurrentDate))
THEN {tbl.DataField}
2_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -2, CurrentDate)) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -2, CurrentDate))
THEN {tbl.DataField}
... Repeat this process until you have all of the columns you need, following this format.
Hope this works for you,
Jason

HOw can i show a table(name given in parameters) in a report program

I made a report in which there is a paremeter asking for a table name ....
PARAMETERS TBLLE_NAME(10) OBLIGATORY.
Now when I enter the table namke then how can i show its values....
HINT:- We have to use fiels symbols....AND THE USER CAN ENTER ANY DDIC TABLE NAME having some records ...........

You can display the contents of the DB table inputted using ALV.
Pass the Structure name as the DB table name inputted.
Use CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE to create the dynamic table of the same structure as the DB table passed.
Once the above steps are done, the internal table with data can be displayed using ALV.
Reward points for all helpful answers.
Thanks,
Balaji

How can I show a 0% range in the data value label on a bar chart thanks?

How can I show a 0% range in the data value label on a bar chart thanks?

I'm not sure what the question is.
I know that if you have a bar chart and one of the categories (X-axis) has bar (Y value) equal to 0%, no bar is plotted for that category. Even the addition of a stroke (line) around the bars doesn't make one appear for 0%. The only automatic way I know of to make it look like there is data in that category is to add the value labels to the bars. Inspector/Chart/Series, select one of the bars on the chart, click on "value labels". Another method that is a workaround is to fudge the number a little in your table so that instead of 0% it is a very small %. This will get you a thin line on the chart.
But if your question is about the value labels (the numbers that display on or in the bars) and you are not getting one for a bar that is supposed to be 0%, it probably means your table doesn't actually have a 0% in the corresponding cell. A blank cell in the table will not get a value label.

My current project in the events library has gone into list mode. ie a single clip on the left, one above another, so showing only about 7 clips. how can I get it back into normal horizontal mode

My current project in the Events Library has gone into list mode. ie a single clip on the left one above another, so showing only about 7 clips. How can I get it back into normal horizontal mode?

That's about what it's supposed to look.
How do You want it to look ?
a. You can change places by using this
b. May be You changed this top right symbol of an hard disk ?
c. or changed the number of frames to be viewed ?
d. OR - it can (at least for me) be so that You think of how it looks in iPhoto. (To me a very common mistake)
Yours Bengt W

How to Capture the Variables Value into the

Using JSLT part of the Jdeveloper/Jheadstart, ADF/Struts Framework.
I'm capturing the value fine using the following,
<c:set var="CvInformationFirstName" scope="request" value="${bindings.CvInformationFirstName.attributeValue}"/>I can even show the value without any problem,
<%-- Show the saved values --%>
<c:out value='${requestScope.CvInformationFirstName}' />Right here, we I try assigning the value of the firstname to a field, I can't accomplish this since I just don't know how to do it,
<html:text name="CvInformationBean" property="CvInformationFirstName" size="10" maxlength="10"/>
Any help will be greatly appreciate it.
Oracle Group

I am not sure what it is you are trying to accomplish. What do you mean with "assigning"? It is a business rule where the FirstName and LastName fields of the master need to be equal to the FirstName and LastName of the details, or is it the other way around? Anyway, it seems you are trying to get this business rule implemented by playing around with <html:text> elements in the JSP. You can't do it that way. Those <html:text> elemens are "two way". When the page is shown they determine which values get shown. Then, when the user enters new values and submits, they determine where those values are stored. If I understand what you are trying to accomplish correctly, you are trying to show values from one place, but submit them to another place. That can't be done strictly at the JSP level (not unless you use JavaScript anyway).
But then again, I may be misinterpreting what you are trying to do. Could you provide some more details about what the desired functionality is?
Finally, may I remark that this is the JHeadstart Forum, where you can communicate with other JHeadstart users all over the world. Also you may have noticed that the JHeadstart Team monitors this forum, and as such it is used as a means of providing some support for JHeadstart users that run into bugs or problems with the JHeadstart Tool (JHeadstart is a Consulting product that does not come with official "Metalink" support). But your problem is obviously not a bug in JHeadstart, you are just wondering how to implement some additional functionality that our Generator does not generate. So I hope you understand that if you get any assistance on this forum with your problem, either from the JHeadstart Team or from other JHeadstart users, it is not because you have a right to it, but because we're a bunch of friendly people out here that like to help out where we can. Demanding a reply like you did with your last two posts (an hour apart!) is really not done.
Kind regards,
Peter Ebell
JHeadstart Team

How can I pass field value betwen view in ICWC?

Hi experts,
I am new to this BSP programming. I have some requirements to modify standard ICWC in CRM 5.0
Hope can get some advices and helps here.
I have added a new field called <status> to context note SEARCHCUSTOMER in BupaSearchB2B view and also the same field name to context note CUSTOMER in BupaCreate view.
I have added the field into both the HTM views and able to execute thru WebClient. However, I have one problem in passing the <status> value from BupaSearchB2B view to the BupaCreate view when I click on the 'create' button.
I do search and saw this thread How can I pass field value beetwen view in IC Web Client? , but i cant figure out how it works.
Do I need to create the field <status> to context note CUSTOMER in BupaSearchB2B? Currently the context note does not have any attributes.
Really appreciate for any help.
Edited by: mervyn tay on Apr 7, 2009 11:42 AM

solved by myself...
code in the CREATE_ACCOUNT method.
ev_entity->set_property( iv_attr_name = 'ZZICNO'
iv_value = lv_icnum1 ).

How can I return multiple values with PL/SQL Web Services

Hi,
I'm new to developping Web Services. I'm doing some tests with JDeveloper and OC4J on my local machine with a Web Services based on a PL/SQL function within a package. Right now that function only returns one value. So the xml response only has one output.
I'd like to know how can I return multiple values with my PL/SQL Web Service. For example, if I want to return an employee's name and id? And that the xml contains two output : <employee>, <empid>?
Reginald
ps : I have searched the forum and I couldn't find an answer to this question, if that has been discussed AND answered before, can you please post the link? Thanks

Alright, I actually found my answer. Since this was asked I think as a followup somewhere else I'll give my answer.
It is very simple, all you have to do is create an Object Type and then Return that object type. After that, JDeveloper will take care of everything and you will have an xml response with multiple values. Here
{color:#ff0000}
create or replace TYPE person AS OBJECT
( id_interv number,
first_name VARCHAR2(50),
last_name VARCHAR2(50),
date_birth date
);{color}
Then your function used in your Web Service should look something like this :
{color:#ff0000}
function info_emp (p_empno IN VARCHAR2) RETURN person AS
l_emp person := person(-1,'','','');
BEGIN
SELECT first_name
,last_name
,emp_no
INTO l_emp.first_name
,l_emp.last_name
,l_emp.emp_no
FROM emp
WHERE upper(emp_no) = upper (emp_no);
{color}
{color:#ff0000}
RETURN l_emp;
EXCEPTION WHEN NO_DATA_FOUND THEN
l_emp := person (-1,'n/a','n/a','n/a');
RETURN l_emp ;
END info_emp;{color}
{color:#ff0000}{color:#000000}After that, this is what the xml response looks like :{color}{color}
<first_name xsi:type="xsd:string">John</first_name>
<last_name xsi:type="xsd:string">Doe</last_name>
<emp_no xsi:type="xsd:string">0250193</emp_no>

How can I pass the value to another frame?

Hi all,
The following is part of my coding of a frame. Once i click on the jButton2, the selected value will be stored into a variable named NAME and the value will be displayed by a label in same frame. At the same time, a new frame named TESTING3 will be set to visible.
private void jButton2ActionPerformed(java.awt.event.ActionEvent evt)
// TODO add your handling code here:
    String name = (String)jList1.getSelectedValue();
    jLabel1.setText(name);       //display the value in a label in same frame
    new testing3().setVisible(true);     //a new frame set to visible
}      Question: How can I pass the value to TESTING3 frame and display it on that frame?
Thanks,
ning.

just make an archive that save that variable and them get them from de clase were you save it
public class sav {
String n;
public sav {
n="";
public void addn(String x){
n=x;
public String shown(){
return n;
and them save it from the frame
sav sun = new sav();
sav.addn(f);
them call it from the other frame
sav sin = new sav();
String s = sin.shown();
label.setText(s);
and i think thats you want to do if its not please explain me better
bye

How can i show a value into a MessageStyledText

Similar Messages

Maybe you are looking for