How can I run a step only if TestStand not is terminated?

I want to run a step I Cleanup only if TestStand not is terminated. Is there a variable I can read who tell this?

Jan Inge -
I did not know whar version of TS you are using so I created the sequence using TS 2.0.
In the example a save the state to the numeric result of a numeric limit step and the step determines that execution is normal if the state is 1, so the step passes, otherwise it fails. The precondition of the next steps use the pass/fail status of the first step. This way you do not need a local variable.
Scott Richardson (NI)
Scott Richardson
National Instruments
Attachments:
CleanupStepNotRunDuringTermination.seq ‏30 KB

Similar Messages

  • How can config for SNP Aggregate only aggregate demand not stock on hand?

    Dear SCM Expert,
    Now we want the system aggregate only demand and not aggregate stock on hand ( Stardard system aggregate both of them) so what i have to do?
    thanks so much.

    Hi
    The stock on hand is a calculated key figure. It is calculated based on macros. So you have to write a macro or you can copy the stock balance macro logic from the standard detailed book. In the detailed book no aggregation is done. But to avoid aggregating stock on hand you have to put logic in the macro
    Thanks
    Aparna

  • How can I report a step only if it is failed?

    In order to decrease the file size of my reports, I would like to only report certain Numeric Limit step results when they are failed.  Can someone tell me how to do this in the step itself?

    Hi jnclaker,
    Hopefully the forum post that Lvrat linked you to is helpful. If you choose to use the Result Filtering Expression to exclude failing steps from your report, please keep in mind that this feature is not available for reports with an XML format.
    Regards,
    Jackie
    DAQ Product Marketing Engineer
    National Instruments

  • How can we run MDBT transaction for non-valuated items only

    HI,
    We want to run the MDBT transaction for non-valuated items only...but through this transaction we can run for all items..
    How can we run only for non-valuated items???
    Regards,

    Dear Anil,
    MD02 - Material level planning ( Multilevel )
    MD01 - Plant level planning ( Multilevel )
    MDBT - Back ground MRP ( Multilevel )
    coming to ur query if all 20 materials belongs to one storage location or one MRP controller
    Then you perform MRP for that 20 materials with the above given user exit
    Also Plz refer my reply from this thread
    [Re: MD01 Replanification.]
    Regards
    Madhu

  • How Can One Run Only In The System Administrator ( ie root ) ?

    Upon creating a System Administrator ( ie root ) in Command + R , of course after Clean Installing OS X ML with my own specific Apple Verified Account ,
    i have the Log In screen from a startup , either Safe Boot or a Boot , and i have my own specifc Apple Verified Account , plus the Other... ,
    which the Other... of course is the System Administrator ( ie root ) .
    How Can One Run Only In The System Administrator ( ie root ) ?
    Is there a way in Terminal with sudo su to make it work ?
    Shall i just always log in with Other... System Administrator ( ie root ) , and just forget the my own specific Apple Verified Account ?

    As of EHP3, you could still install some EHP components. On an ERP 6.00, you could just push SAP_APP to 6.03 and move on. Now if you want another component in your system with an EHP4 version, you can't have some components at EHP3 and some at EHP4. You would install EHP4 for the new component you desire updated and part of the work will be to also update SAP_APP to 6.04.
    EHP4 is an UPGRADE process, with shadow instance & all the joy of an upgrade process. You can either run ressource minimized or downtime minimized. In resource minimized, the shadow instance runs on the same server as the main instance. Downtime minimized allow to run the shadow instance on a separate / new server. Anyway you go, you will always have a "Downtime Phase" when you bring back the updated components from the shadow instance toward the real production one.
    As with any UPGRADE project, the benefits of installing EHP4 for your business has to weighted against the downtime cost.
    Our tests so far on small systems (few data, few users, 120GB database) show ~3 days process from EHP3 to EHP4 (all components) with a downtime phase of about 22 hours using the "resource minimized" path, i.e. shadow & main instance on the same server (4 CPUs, 16GB RAM). Until you give a try at your Sandbox or DEV systems, you won't have realistic figures for your environment.
    Good luck!

  • I have a on line office manager that will only run with windows 7 or vista, how can I run it on my iMac?

    I have an online office manager that will only run with windwos 7 or Vista, how can I run it on iMac?

    If they don't have a Mac version and you must have it, you'll have to install Windows in Boot Camp or similar app.

  • How can I run 2 keynote presentations on 2 different macs with only one keyboard?

    How can I have 2 different keynote presentations that I want to run simultaneously through 2 different projectors, but I'd like to try and avoid using 2 keyboards - and use a hardware solution, rather than relying on my 2 fingers!! (it's a long conference!!!) thanks for any help.

    Open the CSS in DW, and use F10 to open the Code Inspector.
    Place the
    latter as needed.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Random_Yggdrasil" <[email protected]> wrote
    in message
    news:gi2htb$j4j$[email protected]..
    > How can I run 2 Dreamweaver windows at the same time on
    my PC?
    > basically I have 2 monitors and I want to edit CSS on
    one monitor and have
    > the
    > html page open on the other so I can quickly look from
    one to another with
    > in a
    > split second instead of taking that extra time to switch
    back and forth
    > using
    > the tabs at the top, I know I should probably invest
    into a mac so i can
    > work
    > out side of the Dreamweaver application window and I
    will in the future
    > but is
    > there any way i can do this on my windows XP pro PC?
    >
    > Thank you
    > Maurice
    >
    >
    >

  • How can I run the report for different input values at the same time?

    Reports version: Report Builder 6.0.8.13.1
    Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
    I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
    I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
    In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like “o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
    How can I run the report at the same time for all the input values and save the time?
    Thanks in advance.
    Kishore.

    Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
    and then atleast 4 or 6 reports will run simultaneously.
    For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
    Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
    http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
    Thanks
    Subodh

  • URGENT PLEASE:How can I run a a class file on the Apache server?

    Hi Guys and Gurus,
    I am seeking some favor all of experienced gurus, i.e.
    How can I run a a class file on the Apache server? Can I run through an Applet?
    How can I set Environment variables in Windows2000 Professional Environment?
    Actually, I want to extract some records from a MySQL Database running on Apache Server. I wrote a program just to select the columns and show them. It is now a Class file, Now how can I run this class file from the Server???
    The code is here
    import java.sql.*;
    public class RecordShow {
    public static void main(String args[]) {
    String url = "jdbc:mysql://localhost/myhost";
    Connection con;
    String query = "select mytable.column," +
    "from mytable " +
    "where mytable.column = 1";
    Statement stmt;
    try {
    Class.forName("com.mysql.jdbc.Driver");
    } catch(java.lang.ClassNotFoundException e) {
    System.err.print("ClassNotFoundException: ");
    System.err.println(e.getMessage());
    try {
    con = DriverManager.getConnection(url,
    "myuser", "mypassword");
    stmt = con.createStatement();
    ResultSet rs = stmt.executeQuery(query);
    ResultSetMetaData rsmd = rs.getMetaData();
    int numberOfColumns = rsmd.getColumnCount();
    int rowCount = 1;
    while (rs.next()) {
    System.out.println("Row " + rowCount + ": ");
    for (int i = 1; i <= numberOfColumns; i++) {
    System.out.print(" Column " + i + ": ");
    System.out.println(rs.getString(i));
    System.out.println("");
    rowCount++;
    stmt.close();
    con.close();
    } catch(SQLException ex) {
    System.err.print("SQLException: ");
    System.err.println(ex.getMessage());
    Please advise... THANKS
    VJ

    Ehm, I wasn't referring to you at all... read up,
    there's a comment by jschell saying that CGI might be
    easier/better for his purposes.
    Yep.
    I know PHP/Perl/whatever might be easier for some
    purposes, but only if you happen to know them and want
    to/are able to use them. Ok. But you aren't the one asking the question are you. And the person who asked the question seems to have absolutely no familiarity with Apache or applets.
    So whatever they do they are going to have to learn a lot.
    And that does indeed suggest that in all likelyhood they have not investigated the alternatives.
    And for the vast majority of internet applications, especially with smaller projects (obvious this person is not working with a large team), using perl, or something besides java, is going to be the best business solution. It is simpler, and more secure (probably due to the fact that it is simpler.)
    Since this is a Java forum, I
    answer under the assumption that people have made a
    choice one way or another to use a Java solution to
    their problem, so I try to solve it in Java first, and
    only when that fails (very seldom) do I turn to other
    solutions.You approach problems by arbritrarily deciding to try to solve it in java first and only if you fail do you then look to other solutions?
    My first step is to try to figure out which of the various avenues is going to cost less. (And a secondary, but non-trivial concern, is then to convince the customer that just because they have heard of a buzz word like 'enterprise bean' that it doesn't mean that is a cost effective solution.) We must come from different worlds.

  • How can I run a vi developed with 7 Express?

    How can I run a vi developed with LabView 7 Express on another machine ? Do runtime versions exist ?

    Apparently, you want to run it on a machine that does not have LabVIEW installed.
    To make a standalone executable of your LabVIEW program, you need to have the Application builder (included in LabVIEW professional and higher, avaliable as an add-on for base and full).
    To run the application, the target system need to have the LabVIEW 7.0 runtime installed (available as a free download).
    There is also the LabVIEW Player. In this case you need to digitally sign your VIs and there are a few limitations. It is meant for for sharing code ideas and is not a viable substitute for the appl
    ication builder.
    Of course you could also get a second copy of LabVIEW.
    Some other options that would work in a very narrow set of situations: Read your LabVIEW license agreement. Under certain conditions you are allowed to install a second copy of LabVIEW on your home computer. If this is for personal educational use only and you qualify, you could also buy the LabVIEW student edition.
    LabVIEW Champion . Do more with less code and in less time .

  • How can I run applications in full screen on my MacBook Pro?

    I recently started using an external HP w1858 monitor as a secondary display with my MacBook Pro. I'm having troubles with running applications in full screen mode on the secondary display. How can I run applications in full screen mode on the secondary monitor?

    If you always have the external display connected, you can configure the OS to consider it as the default or main display. Once everything is connected and set to your liking (resolution, color depth, etc.), "bless" the external display by clicking & dragging the menubar from the Mac's internal display onto the external. This only works if you are not using video mirroring.
    Once this is done, applications will open by default on the external and now "main" display and you can configure them to go fullscreen or whatever.

  • All my PDF forms are automatically transformed in Word forms,how can I change that and only choose the PDF I want to transform

    All my PDF forms are automatically transformed in word forms,how can I change that and only decide which PDF to be transformed in word

    Hi Ulfsch,
    Thank you for posting on the Adobe Forums, kindly try the step mentioned below.
    1) Right click on any of the PDF file and choose the option open with
    2) Select choose default program
    3) Select Adobe Reader/Acrobat from the list
    5) Check the box "always open this type of file with selected program" (not the exact same wording)
    6) Click OK
    If you are on Mac, CTRL+Click on the file.
    Go to Get info
    Go to Open with
    Change it to Adobe Reader/Acrobat and click change all.
    Thanks,
    Vikrantt Singh

  • How can I run Google Analytics on my site being hosted in Business Catalyst?

    Hi,
    I already have an existing website which is hosted, and of course I am the domain owner.
    I have created a new modified site in Adobe Muse CC and will wish to upload this new site to my domain once completed.
    I will need to run Google Webmaster tools etc before I replace the old site.
    I do not wish to replace the old site as yet prior to completing the new site in Muse CC
    At present I am "subscribed" to Google Analytics/Webmaster tools as a webmaster under my webmaster site (different) and have placed the "google verification code" metatag in my new site's "page properties <head></head tags only", and have uploaded to Business Catalyst.
    Business Catalyst are not my hosts for this site once it becomes "live". They are my "Trial Hosts"
    ? how can I run google analytics and tools for this new site prior to lauch (ie replacing my old site) ?
    Many thanks, await your response.
    (PS... Latest Muse CC is ACE!... Love it!)

    I finally figured out what I was doing wrong. First the information has to be entered on the home page. So the path is Home page> Page properties> Metadata> HTML for <head>. Secondly I was entering the information from the downloaded html file rather than the code they provide  under the alternate methods tab during the verification process . Google has a fine set of video tutorials to walk you through. https://support.google.com/webmasters/answer/35179?hl=en&ref_topic=3162387
    Thanks for all your help!
    Paula

  • Help:How can I run the J2EE Client Application? Thanks

    Help:How can I run the J2EE Client Application that will access the remote J2EE1.4 application server which runs on another host computer?
    I have developped a stateles senterprise java bean name converter and deloyed it in the j2ee1.4 application server on the host machine A. The converterbean provides the remote home interface and remote interface. At the same time I have developped the j2ee application client named convertappclient. When I access the conveter bean at host computer A through the script 'appclient.bat' as 'appclient -client convertappclient.jar', the client can access the bean sucessfully. Now I want to access the bean through the script 'appclient.bat' at host computer B,what files should I copy from host computer A to host computer B;and what the command line should be like? Thanks!
    The following are the code of the enterprise java bean and it's home interface .
    The client code is also provided.
    The enterprise java bean:
    package converter;
    import java.rmi.RemoteException;
    import javax.ejb.SessionBean;
    import javax.ejb.SessionContext;
    import java.math.*;
    public class ConverterBean implements SessionBean {
    BigDecimal yenRate = new BigDecimal("121.6000");
    BigDecimal euroRate = new BigDecimal("0.0077");
    public ConverterBean() {
    public BigDecimal dollarToYen(BigDecimal dollars) {
    BigDecimal result = dollars.multiply(yenRate);
    return result.setScale(2, BigDecimal.ROUND_UP);
    public BigDecimal yenToEuro(BigDecimal yen) {
    BigDecimal result = yen.multiply(euroRate);
    return result.setScale(2, BigDecimal.ROUND_UP);
    public void ejbCreate() {
    public void ejbRemove() {
    public void ejbActivate() {
    public void ejbPassivate() {
    public void setSessionContext(SessionContext sc) {
    The bean's remote home interface :
    package converter;
    import java.rmi.RemoteException;
    import javax.ejb.CreateException;
    import javax.ejb.EJBHome;
    public interface ConverterHome extends EJBHome {
    Converter create() throws RemoteException, CreateException;
    The bean's remote interface:
    package converter;
    import javax.ejb.EJBObject;
    import java.rmi.RemoteException;
    import java.math.*;
    public interface Converter extends EJBObject {
    public BigDecimal dollarToYen(BigDecimal dollars) throws RemoteException;
    public BigDecimal yenToEuro(BigDecimal yen) throws RemoteException;
    The j2ee application client:
    import converter.Converter;
    import converter.ConverterHome;
    import javax.naming.Context;
    import javax.naming.InitialContext;
    import javax.rmi.PortableRemoteObject;
    import java.math.BigDecimal;
    public class ConverterClient {
    public static void main(String[] args) {
    try {
    Context initial = new InitialContext();
    System.setProperty("java.naming.factory.initial","org.jnp.interfaces.NamingContextFactory");
                   System.setProperty("java.naming.provider.url","jnp://10.144.97.250:3700");
    Context myEnv = (Context) initial.lookup("java:comp/env");
    Object objref = myEnv.lookup("ejb/SimpleConverter");
    ConverterHome home =
    (ConverterHome) PortableRemoteObject.narrow(objref,
    ConverterHome.class);
    Converter currencyConverter = home.create();
    BigDecimal param = new BigDecimal("100.00");
    BigDecimal amount = currencyConverter.dollarToYen(param);
    System.out.println(amount);
    amount = currencyConverter.yenToEuro(param);
    System.out.println(amount);
    System.exit(0);
    } catch (Exception ex) {
    System.err.println("Caught an unexpected exception!");
    ex.printStackTrace();
    }

    Surprisingly I find an upsurge in the number of posts with this same problem. I recently found a post which gave a nice link for this. Follow the steps and it should help:
    http://docs.sun.com/source/819-0079/dgacc.html#wp1022105

  • How can i run applets in kawa?

    how can i run compiled applet programs in KAWA
    help me

    If you always have the external display connected, you can configure the OS to consider it as the default or main display. Once everything is connected and set to your liking (resolution, color depth, etc.), "bless" the external display by clicking & dragging the menubar from the Mac's internal display onto the external. This only works if you are not using video mirroring.
    Once this is done, applications will open by default on the external and now "main" display and you can configure them to go fullscreen or whatever.

Maybe you are looking for