How can i run multiple libraries simultaneously ?

i work in music & post production, i tend to keep my listening music on my 60 gig ipod, & keep my main itunes library for sound fx & production masters...
i understand i can create & change libraries but is there a way or app that will give me access to multiple libraries simultaneously ? id like 3 .. each accessing different drives without having to save, close, load or dump anything. ????

I've found this:
http://dougscripts.com/itunes/itinfo/ituneslibrarymanager.php
But I'm having trouble determining whether they can run simultaneously. But, it's something for you to look into, at least.
CG

Similar Messages

  • How can I record multiple tracks simultaneously?

    How can I record multiple tracks simultaneously?  Or rather what hardware do I need to do this?  I currently run guitars and mic into a PA and then the PA into Garageband.  But this is just one track.  I want to record the guitar as one track while simultaneously recording vocals as another track.  What hardware do you suggest - keeping it affordable?

    if you want to use your two chanel PA, pan 1 channel to the left, and the other to the right, and set one GB track to Mono 1 and the other to mono 2.
    if you want better quality, any two channel interface will work:
    http://www.bulletsandbones.com/GB/Interfaces.html

  • How can I run multiple midlets in parallel via the raspberry pi cmd line interface?

    I am trying to run multiple midlets at the same time on my raspberry pi.
    From netbeans point of view I am able to deploy and run them. But for my applications I want to auto start multiple midlets on the raspberry pi.
    On the cmd line interface of java me 8 I have commands to install a midlet and run a midlet.
    But i am not able to start multiple midlets.
    Can someone explain to me how I can do this?

    Hi!
    Could you please clarify a bit: do you want auto-start behavior of your applications or be able to start them manually via CLI?
    Because "auto start" means that applications are started by Java once you start Java itself and in order to make it happen you shall mark your applications appropriately (check MEEP spec for "MIDlet-<n>-Type" application attribute value "autostart"). If this is the case, have you added this attribute?
    If you want to run them manually you should be ale to do so via CLI just the same way as you start one application (via "ams-run" command).
    Either way, could you also please clarify what are the symptoms of the problem? E.g. on CLI what are the messages you receive back (if start is unsuccessful what is the error message etc).
    In addition please mind that there is limit on number of simultaneous VM tasks. If I'm not mistaken by default it is 6: 2 of them are used by system code and each running MIDlet consumes 1 VM task. If you want to increase it please change the value of "MAX_ISOLATES" property in jwc_properties.ini file. The maximum supported value is 16
    Regards,
    Andrey

  • How can I create multiple libraries on a windows 8 HP computer?

    I just got the newest generation Ipod Touch, and the itunes is not supported on my iMac G5. My parents have a Windows 8 HP computer. My dad's itunes account is on that computer. So what I want to do is use my external hardrive to sync it to my Windows 8 computer. I am trying to find out how to create multiple libraries.
    Please help me out.

    These all have drm so i cannot read them without a i-Device. 
    Correct.  If you do not have an iOS device or a Mac running Mavericks, do not buy Apple iBooks.  They will be unreadable.

  • How can I run multiple instances of an app in netbeans?

    Hi,
    I would like to run multiple instances of an app in netbeans, this is essential when making GUI changes and you want to compare them with the older version.
    Thanks in advance,

    It is still true that Netbeans cannot launch the same project twice, even with the latest 7.2 and JavaFX Beta version. When trying to "run" the second instance, Netbeans tries to rebuild the project jar file but can't delete it because it is "locked" by the first instance.
    For JavaFX projects, I start one instance by double-clicking the jar file (in the project's dist folder), then use Netbeans to launch the second instance. For comparing your app's old vs. new screens, save the old app version by copying the project folder to another place and use the double-click jar to launch the old app, then proceed to revise the new app version and launch it under Netbeans. That's how you run one version "outside" another version.

  • How can i run multiple instances of Photoshop EXE at the same time on windows 7

    Alright. You may ask why do you need multiple ?
    Assume that i have 10000 PSD files in 10 different folders
    I have a script that just save as them as PNG
    And these files are each 3000x3000 px
    My computer has 8 cores and 1 photoshop exe is only using 1 cpu core
    Also i have SSD raid system it has 750 mb read write per second
    So right now i am wasting my time with running only 1 photoshop exe instead of at least 4

    I'm not aware of a way to run multiple instances or different versions of photoshop at the same time on windows.
    Assuming of course they are all installed on the same operating system.
    On mac versions you can running two different versions of photoshop at the same time, but i don't think that's possible on windows where it
    appears that only one version of photoshop can run at a time.

  • How can I rename multiple files simultaneously

    I'm new to Macs and I'm looking for a way to rename multiple files simultaneously. These are photos from my SD card that I wish to give the same name but increment the name by 1 at the end of the filename.

    A Better Finder Rename is perfect for this.   I use it all the time to rename image files.
    There is also a companion app called A Better Finder Attributes that is also useful for image files.

  • How can I run several VIs simultaneously?

    All the VIs are programmed with global variables, but I don´t know how to run them simultaneously from one principal VI, and obtained the data calculated in each VI at the moment and not when the corresponding VI finishes. Do I explain myself? This is the specific problem, I have several VIs, each one containing a State Machine, but I want to have a principal VI, to function as a HMI, so it calls all the VIs and also obtained the data calculated on the states, but, the problem is that if I attached the state machine as a subVI, I only obtained the last result, but I want all the process results as they are calculated, not at last.
    Thank you for your attention

    cristag, mike is correct, you can use vi server.  However a very easy way to do this is to simply take advantage of LabVIEW's Parallel nature.  Call the sub vi's in parallel to your main loop.  Chose whatever data communication mechanism you like,  globals are ok but know the caveats, queues or notifires are good too.  Shared variables also work well and can be better than Queues or Notifiers if you are using LabVIEW real time. 
    Message Edited by StevenA on 06-24-2008 03:35 PM
    Message Edited by StevenA on 06-24-2008 03:36 PM
    SteveA
    CLD
    FPGA/RT/PDA/TP/DSC
    Attachments:
    untitled5.PNG ‏7 KB

  • How can I download multiple files simultaneously? e.g. 6 files

    When I attempt to download multiple files (say 5 in number), the Mozilla allows only two files too be downloaded simultaneously. I wanted to change the option of downloading six files together but did not find the feature that could do so. Can you please kindly help or there is no such feature in Mozilla?

    There is a hidden preference for this. Check out this article: [http://kb.mozillazine.org/Network.http.max-persistent-connections-per-server Network.http.max-persistent-connections-per-server - MozillaZine Knowledge Base]
    If you haven't changed Firefox settings through about:config before, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)

  • How Can I run multiple independant sessions of LabVIEW on one pc?

    I have tried to accomplish this by creating a second LabVIEW.exe named LabVIEW2.exe. Then I run the original and launch my application, run LabVIEW2.exe and I get a new splash screen but no new instance of LabVIEW in the Task Manager. I have seen this work before on different computers running all the same software. Any suggestions........

    > Can you provide any more info
    > about the computers that did this?
    Some applications on Windows will open a new instance each time their
    EXE is opened or double clicked on. Since LV is able to multitask many
    different VIs and applications, and it is typically useful to reuse
    subVIs, so it was decided that these actions would just open the already
    running LV. If you want to run more than one LV, rename it. Whenever
    you are wanting to open a VI into a particular LV, you really can't
    trust double clicking. The OS decides which app to launch or connect
    to, and it is rather difficult to predict what the outcome will be. For
    this reason, either drag-n-drop the VI/LLB to the EXE, or use open from
    within the EXE.
    Greg McKaskle

  • How Can I lock multiple VIs simultaneously

    I have several hundred VIs that I would like to open, lock, and password protect (with the same password).  Is there an automated way to do this?  I was hoping to not have to open each and every VI

    You can use attached Locking tool....if you are using LV 2010 or newer. I do not take any responsibility though.....
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.
    Attachments:
    VI Locking Tool.llb ‏229 KB

  • How can I run the report for different input values at the same time?

    Reports version: Report Builder 6.0.8.13.1
    Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
    I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
    I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
    In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like “o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
    How can I run the report at the same time for all the input values and save the time?
    Thanks in advance.
    Kishore.

    Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
    and then atleast 4 or 6 reports will run simultaneously.
    For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
    Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
    http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
    Thanks
    Subodh

  • How can I activate multiple tags at one time?

    How can I activate multiple tags at one time?

    I'm pretty sure you can run this on a sub tree of /etc/tags
    http://dev.day.com/docs/en/cq/current/wcm/page_publish/tree_activate.html

  • How can I run 2 keynote presentations on 2 different macs with only one keyboard?

    How can I have 2 different keynote presentations that I want to run simultaneously through 2 different projectors, but I'd like to try and avoid using 2 keyboards - and use a hardware solution, rather than relying on my 2 fingers!! (it's a long conference!!!) thanks for any help.

    Open the CSS in DW, and use F10 to open the Code Inspector.
    Place the
    latter as needed.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Random_Yggdrasil" <[email protected]> wrote
    in message
    news:gi2htb$j4j$[email protected]..
    > How can I run 2 Dreamweaver windows at the same time on
    my PC?
    > basically I have 2 monitors and I want to edit CSS on
    one monitor and have
    > the
    > html page open on the other so I can quickly look from
    one to another with
    > in a
    > split second instead of taking that extra time to switch
    back and forth
    > using
    > the tabs at the top, I know I should probably invest
    into a mac so i can
    > work
    > out side of the Dreamweaver application window and I
    will in the future
    > but is
    > there any way i can do this on my windows XP pro PC?
    >
    > Thank you
    > Maurice
    >
    >
    >

  • How can I pass multiple condition in where clause with the join table?

    Hi:
    I need to collect several inputs at run time, and query the record according to the input.
    How can I pass multiple conditions in where clause with the join table?
    Thanks in advance for any help.
    Regards,
    TD

    If you are using SQL-Plus or Reports you can use lexical parameters like:
    SELECT * FROM emp &condition;
    When you run the query it will ask for value of condition and you can enter what every you want. Here is a really fun query:
    SELECT &columns FROM &tables &condition;
    But if you are using Forms. Then you have to change the condition by SET_BLOCK_PROPERTY.
    Best of luck!

Maybe you are looking for