How can I see a run time error?

When I run the VI in development mode the VI works just fine. But after I compile and run the VI I get an error that flashes across the screen and then disappears. Arggg! How can I stop the process to see my error?

Steve,
There are a few possible solutions to this.
One, I am writing an article about right now. It involves writing a Loader. This is a simple VI that loads and runs your main program, so that it can remain as a VI. If this is a viable solution for you (your VIs remain as VIs), then it is probably a great solution, as you won't have to worry about why your VI runs differently as an executable than in development.
The second is a lot more involved. You need to troubleshoot this error. First, you should already have in place some good error handling. If you don't, get it. Once you have it, or if you already do, you need to determine about where the error is coming from, and start putting in some troubleshooting. I always like to create a singl
e Global Variable (this to me is the ONLY good use for a global) with all sorts of indicators to act as a runtime probe (since you can't probe a built application.) You just write values to various controls as you need them, when you need them, and this allows you to view those values. Since this is designed primarily to view data in reentrant VIs, you will have to create a viewer for your built application. Simply create a VI that loads when you run your app that displays all of the global values.
Those are the only suggestions I can offer for now. Without knowing the nature of the error, etc, I can't give you any further advice.

Similar Messages

How can I solve my 'run time error' accessing MySpace?

For the last 4 days, everytime I try to log in to my MySpace account I get the same 'runtime error' message as follows....
'Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>'
Other people who have tried to log into different MySpace accounts on my page get the same message. however, all other websites are working fine.
Help! I am totally computer illiterate so any help would be much appretiated!
BEX83
MacBook Mac OS X (10.4.6)

Hi tranzrock69,
Welcome to Apple discussions:)
I don't think it had anything to do with an MS dnld.
Glad resetting Safari worked for you thanks for letting us know.
I didn't recommend resetting Safari, unless it proved necessary,
Resetting does all of the below, & some folks rather not lose one or the other
of the items listed, for me it would be my saved names & passwords.
"Resetting Safari clears the history, empties the cache, clears the Downloads window, and removes all cookies. It also removes any saved user names and passwords or other AutoFill data and clears Google search entries." "
If your mac is acting oddly & are concerned about the ms dnld, you may want to post in one of the apple fdiscussions forums. OS Tiger forum for instance.
Enjoy both, your mac & my space!
Eme'~[)

How can I correct a "Run time error" on my mac mini?

On one web site in my book marks I have suddenly got this message -"Runtime error" How can I fix it?

Please post a screenshot that shows what you mean.
To take a screenshot, follow the instructions linked below. Be careful not to include any private information.
Shortcuts for taking pictures of the screen
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

How can I see date and time of a imovie event (new imovie 10.0.4). Thank you for your answer and greetings from switzerland.

How can I see Date and Time of an event in iMovie 10.0.4?
Thank you for your answer.
greetings from Switzerland

Managing Profiles
http://support.mozilla.com/en-US/kb/Managing-profiles

How to display "Non-Fatal Run-Time Error In Function Panel" dialog?

I'm learning how to develop an IVI-C specific driver using LabWindows/CVI. When I run my function from its function panel and it returns an error, I would like to display a dialog with both the error code and error message (as opposed to simply returning an error code on the function panel). This would save the user from having to call Prefix_error_message() to translate the error code to its error message. NI-DCPower driver is a good example of this behavior (see attached error dialog). How do I show the "Non-Fatal Run-Time Error In Function Panel" dialog? Any help is greatly appreciated. Thanks!
Attachments:
ErrorDialog.png ‏8 KB

Hi Shawn,
Thank you for replying to my post. The checkErr is just an error handling macro defined in ivi.h to goto Error: tag when the function returns a non-zero value. I have been using the checkErr macro (as well as viCheckErr and other macros) in my driver.
Using the same hp34401a specific driver as an example, please allow me to explain my question in more details:
Let's take the hp34401a_close function as an example. It is a simple function with only a few lines of code:
When the hp34401a_close function is run from its front panel using an invalid session handle (e.g. "8" in this screen capture):
You will get three "Non-Fatal Run-Time Error" popup dialogs, one from each of the IVI library functions that it calls: Ivi_LockSession, Ivi_UnlockSession, and Ivi_Dispose. However, there is no "Non-Fatal Run-Time Error" popup dialog from the hp34401a_close itself.
My IVI-C specific driver is behaving identical to the hp34401a specific driver.
In comparison, if run niDCPower_close function from its front panel using an invalid session handle (using the same "8" in this screen capture):
You will only get one "Non-Fatal Run-Time Error In Function Panel" from the niDCPower_close function itself:
I think the behavior of niDCPower driver is much better than the hp34401a driver. It replaces the three "Non-Fatal Run-Time Error" popup dialogs from the IVI library with a single "Non-Fatal Run-Time Error In Function Panel" popup dialog from the driver function itself. I would like to do the same thing with my driver but have not figured out how to display a "Non-Fatal Run-Time Error In Function Panel" dialog. Thanks in advance for your help!

How can I see the elapsed time on imported video?

I'm trying to make a video in iMovie 11'. I would like to be able to view the elapsing time of the song I imported so I can match video footage with audio. With the older version of iMovie, I could see a time clock on the bottom of the video I was importing, so I could match the mouth to the lyrics.
In the older iMovie version, the entire audio would play when only part of the clips had been imported by me. Now with this version, the song stops playing when the clips stop. So partial completion of the video, doesn't allow a full time clock of the total song to allow me to match the voice on the audio with the film of someone singing.
In short, I can't find the running time clock for the video player in the project library.
Can you help me with thsi? The help menu has not anweered my questions.
Thanks.
Dave Demoise

I agree with Bengt W. There are many reasons, even in a simple movie, to want to know the timing of things. This is a surprisingly frustrating product. For want of timing information, you are requiring your users to pay $300?
In my situation, I took some video of a show (with the performers permission) with an iPad and an iPod. All I want to do is make a movie with one video as the main position with a series of cutaway clips from the other. It is incredibly frustrating to do this without knowing where you are within each clip.
When helpful and capable forum participants like we have here have to spend time explaining how best to make do with a product, it's a clear indication of a fault with the product. Now, I either have to spend extra time in iMovie making due with this crippled interface, or I have to spend time looking for an alternative product.
Consider this a feature request!

How do I fix this run time error crash on start up?

Whe I start Elements 10, it stops and waits at the "Organize" or "Edit" choice. (normal operation.) I chose edit and it crashes with a C++ run time error.

See if this Adobe troubleshooting document helps:
http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
Ken

How can I uninstall Labview run time engine from the machine?

I understand that Labview has not given any provision to show customized 'License Agreement screen'. Isn't it? This is the main cause of my problem. Since I want to show our own license agreement (LA) screen, I made the one using Labview. To show this license agreement screen, I first install a small application which has only this LA screen with Labview run time engine. The customer can see License Agreement Screen with Labview Run Time Engine on his machine. If My customer accepts the LA, I will install the main application further by calling another setup.EXE file.
If my customer selects 'Do Not Agree' to the LA, I will quit the installation process. Here I also want to 'uninstall' Labview Run Time Engine
from his machine since he doesn't accept License. I would like to know how to uninstall Labview run time engine from his machine?
Another way which I could think is to run the LA screen from the CD with Labview run time engine on the CD. I will start installing the main S/W to the customer's machine with LABview Run Time Engine only after he accepts License agreement. I would like to know how to run the Labview application from CD without installing run time engine on the target machine?
Can anyone suggest solution to my problem?
Thanks,
Chander

J-Tek,
I would suggest re-installing the Run-time Engine and then uninstalling it after a reboot. Also, you can download a program called Msicuu.exe (for NT, 2000, XP or Msicu.exe for 9x) to help clean up the registry for uninstalled programs.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

How can I delete a "Run Time Air" from my mac book pro

how can I get rid of the "Run Time Air" on my Macbook Pro

Welcome to the Apple Support Communities
If you use Snow Leopard, open iTunes, go to iTunes Store in the iTunes sidebar and log out

How can I test the running time of a method?

c.What is the running time of your method smallest, as a function of n, the number of elements in the list? Use big-Oh notation.
I quoated from a java problem..
Anyone can tell me how I can test the running time? Thanks ! :D

it depends on what is in the method. For example a for loop executed n times would have a O(n). A double for loop (each loopp run n times) will have O(n^2). Do this: determine how many times each loop in the method is run. This is the first term in your runtime equation. Do this for all other loops in the method and add them all together. Most other statements that are not iterative should have a constant runtime so O(1). For conditional statements, the runtime depends on the most time consuming portion of the statement. Once all these are added together, take the O(equation) which should just leave the biggest term. i.e. O(5n^2+3n+8) = O(n^2). Hope this helps.
note: this does not apply to recursive methods

How can I see a running balance of my itunes spending?

Is there any way I can see my running balance of what I have spent on my account? For example if I had £10 in my account and I bought one item at 99p it would show running balance history of £9.01.

iTunes will always show the balance you have remaining when you're on the iTunes Store page in iTunes and are logged into your iTunes Store account.
You can see the purchases you've made if you log into your account and click the Purchase History button.
Regards.

How can I get the run time of a method?

I click a button "draw" to invoke a method such as draw many shades.
It hangs a long time.
I want to get the information of how long it spent.
How can I do it?
I'm new guy, more detailed please .
one example would be much better
ThankS all :)

Try JAMon. It is much more flexible than currentTimeMillis() and easier to use.
import com.jamonapi.*;
drawShape()
Monitor mon=MonitorFactory.start();
..code being timed...
System.out.println(mon.stop());// prints time in ms.
}steve - http://www.jamonapi.com - a fast, free, simple performance tuning API.

How can attach movieclip in run time

Hi,
Getting some problem to attach movieclip at run time...............
I have a shell.swf and at run time i am attaching a template.swf. In template.swf file have mcMenu Movieclip.
I am unable to access the or attach the movieclip at run time getting this error (1180: Call to a possibly undefined method mcMenu.)
that movieclip is not available on the stage.... it is in the library of template.swf file. Need help
thanks in advance
flash@dicts

use the applicationdomain class:
load(yourswfURL,yourclassString);
// you don't need to change anything below:
function load(urlS:String, classS:String) {
    var ldr:Loader = new Loader();
    ldr.contentLoaderInfo.addEventListener(Event.COMPLETE, function(e:Event){loadCompleteF(e,classS);});
    ldr.load(new URLRequest(urlS));
function loadCompleteF(e:Event,classS:String):void {
    var loadedAppDomain:ApplicationDomain = e.target.content.loaderInfo.applicationDomain;
    var C:Class = loadedAppDomain.getDefinition(classS) as Class;
    var instance:* = new C();

How can I see exactly what time messages are sent or received from IPhone 4

Is there any way to view exact times that messages are sent and received from an iPhone 4 running iOS 7?

If you are using iOS 7, then slide the text bubble to the left and you can see the time stamp to the right of the bubble.

How can I limit the run time of my VI so that it starts when the arrow is clicked, and stops automatically when a specified time has elapsed using Labview 7?

I can't seem to find the proper tools to do this. Any help would be greatly appreciated. Thanks in advance.

I'm guessing that you're running something in a While loop, so you should be able to stop whenever you want.
In LabVIEW 7, there is a new Express VI on the Time & Dialg palette named Elapsed Time. You specify the time you want, and it generates a boolean True after that amount of time has passed. Just connect this boolean to the Wile loops conditional terminal, either directly or "OR" it with a stop button so you can stop it yourself if needed.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

How can I see a run time error?

Similar Messages

Maybe you are looking for