How can I see the MAD results in my planning book

Hello Gurus:
I'm setting up some statistical models in APO DP and running some test data through them. How can I see the results of the MAD to verify if the models are calculating correctly? I was hoping I can see the monthly MAD values in a key figure in my planning book?
Does anyone know?
Andrea

Hello Andrea,
As far as I know, I don't think there's a standard key figure or macro could acheive this.
MAD or other errors in forecast are not saved as time series, so I don't know why you want to see them as time series.
You can see the forecast errors in forecast result screen, and if you push comparision button, you can see forecast errors for several last runs.
But I don't know how to put these value into planning book, unless you want to apply your own logic ...
Best Regards,
Ada

Similar Messages

How can we restrict the users/planners for a planning book?

Hi experts,
How can we restrict the users/planners for a planning book?
Thanks,
Naga.

Hi Naga,
we describe this in our SAP Demand and Supply Network Planning rapid-deployment solution.
Access this area directly via
http://service.sap.com
/rds-dpa
In the configuration guide Demand Planning Settings, Macros and Chart
Engine (DP3) read Appendix: Setting up Roles and
Authorizations.
BR Frank

How can I see the combined result of primary and secondary color correction in the vectorscope

Hello there,
so I can't figure out how to see the combined result of all the color correction I did on a shot. If I click on each individual layer (primary or each individual secondary) I can see the result of each one individually on the vectorscope, but I want to be able to see the final result of all the layers combined. Is this possible within speedgrade?
thanks in advance for the help
Luc

Occasionally SpeedGrade seems to forget itself or something. It's kinda weird/funny, but ... on occasions I have been working and say one tab just stopped responding when I clicked on it, but everything else was fine. Shut it down, come back into it ... all is righteous. Thankfully I've not had some of the major bonkers-responses some clearly have. I'm sure that will come also. This is an incredibly complicated and complex program under the hood, of course. But all in all ... I do love working in it.
When I have the excuse to do so ...

I try to find something on my iPad, many results are emails, when I push on an email I can't see the email, because I get ever the first email,or the previous selected email in my inbox. How can I see the email selected?

I try to find something on my iPad, many results are emails, when I push on an email I can't see the email, because I get ever the first email,or the previous selected email in my inbox. How can I see the email selected?

Is your Yahoo account set up as POP3 or IMAP?

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used? So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ

How can i see the posts that i answered?

How can i see the posts that i answered?
Actually i some others post for a VLAN.. now i need that post ... but i'm unable to find it...
Can someone please help me in this ?
Regards,
Chandu

I probably do not fully understand your question. Based on what I think I understand I offer these suggestions:
- if you click on your profile, or using the account link on a forum page select profile, then at the bottom of the information of your profile is a list of the responses that you have made. But it displays a limited number of responses.
- if you use the search feature of the community you might find it by searching on your name, or better to search for some term that was used in the response.
HTH
Rick

How can I see the alpha channel in the channels palette?

Hello, mi format plugin loads a rgba image. I see it with transparency, that's ok, but when I go to the channels tab I only see 4 items (RGB, Red, Green and Blue).
How can I see the alpha channel of my file in the channel tab?
Thanks!

OK, something must be wrong... but I don't find it!
That's my whole code (resumed). I ommit some code (saving file code (not used) or main function, where I only call te "DoSomething" functions. You can see that I use layers. The DoReadContinue function is only used to show the preview.
In the DoReadStart function I set the parameters for the layers (and the preview), and I fill the "data" and "layerName" params in the DoReadLayerContinue function. I hope you can understand the code!
const int32 IMAGE_DEPTH = 32;
SPBasicSuite * sSPBasic = NULL;
SPPluginRef gPluginRef = NULL;
FormatRecord * gFormatRecord = NULL;
intptr_t * gMxiInfoHandle = NULL;
MXIInfo* gMxiInfo = NULL;
int16 * gResult = NULL;
#define gCountResources gFormatRecord->resourceProcs->countProc
#define gGetResources   gFormatRecord->resourceProcs->getProc
#define gAddResource    gFormatRecord->resourceProcs->addProc
CmaxwellMXI* cMax;
static void DoReadPrepare (void){
    gFormatRecord->maxData = 0;
static void DoReadStart(void){
    char header[2];
    ReadScriptParamsOnRead (); // override params here
if (*gResult != noErr) return;
    // Read the file header
    *gResult = SetFPos (gFormatRecord->dataFork, fsFromStart, 0);
    if (*gResult != noErr) return;
    ReadSome (sizeof( header ) * 2, &header);
    if (*gResult != noErr) return;
// Check the magic number for avoid no-mxi files
    int headerID = CheckIdentifier (header);
    if( headerID != HEADER_MXI ) *gResult = formatCannotRead;
if (*gResult != noErr) return;
// The file is OK. Let's continue to obtain the data of the image.
cMax = new CmaxwellMXI( 0 );
strlen((char*)gFormatRecord->fileSpec->name);
gMxiInfo->filename = _strdup((char *)gFormatRecord->fileSpec->name + 1);
bool res = cMax->getMXIIInfo(
                (const char*)gMxiInfo->filename,
                gMxiInfo->width, gMxiInfo->height,
                gMxiInfo->burn, gMxiInfo->monitorGamma, gMxiInfo->iso,
                gMxiInfo->shutter, gMxiInfo->fStop, gMxiInfo->intensity,
                gMxiInfo->scattering,
                gMxiInfo->nMultilightChannels, gMxiInfo->lightNamesList,
                gMxiInfo->availableBuffersMask,
                gMxiInfo->widthPreview, gMxiInfo->heightPreview,
                gMxiInfo->bufferPreview);
if(!res) return;
// Check the available extra buffers
int count = 0;
if( gMxiInfo->availableBuffersMask & CmaxwellMXI::ALPHA_BUFFER ){
    // We will use that string to obtain later the desired extra buffer.
    gMxiInfo->extraBuffersList[count] = "ALPHA";
    gMxiInfo->hasAlpha = true;
    count++;
else{
    gMxiInfo->hasAlpha = false;
gMxiInfo->nExtraBuffers = count;
switch( IMAGE_DEPTH ){
case 8:
      gMxiInfo->mode = plugInModeRGBColor;
      break;
case 16:
      gMxiInfo->mode = plugInModeRGB48;
      break;
case 32:
      gMxiInfo->mode = plugInModeRGB48; //96 gives me an error
      break;
// SET UP THE DOCUMENT BASIC PARAMETERS.
VPoint imageSize;
if( gFormatRecord->openForPreview ){
    // Preview always RGB8.
    imageSize.v = gMxiInfo->heightPreview;
    imageSize.h = gMxiInfo->widthPreview;
    gFormatRecord->depth = 8;
    gFormatRecord->imageMode = plugInModeRGBColor;
    gFormatRecord->planes = 3;
    gFormatRecord->loPlane = 0;
    gFormatRecord->hiPlane = 2;
    gFormatRecord->colBytes = 3;
    gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes;
    gFormatRecord->planeBytes = 1;
else{
    // Configure the layers. All RGBA32.
    imageSize.v = gMxiInfo->height;
    imageSize.h = gMxiInfo->width;
    gFormatRecord->depth = IMAGE_DEPTH;
    gFormatRecord->imageMode = gMxiInfo->mode;
    gFormatRecord->layerData =
        2 + gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers;
    gFormatRecord->planes = 4; // RGBA.
    gFormatRecord->loPlane = 0;
    gFormatRecord->hiPlane = 3;
    gFormatRecord->planeBytes = IMAGE_DEPTH >> 3;
    gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
    gFormatRecord->colBytes = gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
    gFormatRecord->transparencyPlane = 3;
    gFormatRecord->transparencyMatting = 1;
    gFormatRecord->blendMode = PIBlendLinearDodge;
    gFormatRecord->isVisible = true;
SetFormatImageSize(imageSize);
gFormatRecord->imageHRes = FixRatio(72, 1);
gFormatRecord->imageVRes = FixRatio(72, 1);
VRect theRect;
theRect.left = 0;
theRect.right = imageSize.h;
theRect.top = 0;
theRect.bottom = imageSize.v;
SetFormatTheRect(theRect);
// No resources for now.
if (sPSHandle->New != NULL) gFormatRecord->imageRsrcData = sPSHandle->New(0);
gFormatRecord->imageRsrcSize = 0;
    return;
/// Called for prewiew only.
static void DoReadContinue (void){
    // Dispose of the image resource data if it exists.
    DisposeImageResources ();
if( gFormatRecord->openForPreview ){
    VPoint imageSize = GetFormatImageSize();
    gFormatRecord->data = gMxiInfo->bufferPreview;
      if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
    if( gFormatRecord->data != NULL ){
      delete[] (Crgb8*)gMxiInfo->bufferPreview;
      gMxiInfo->bufferPreview = NULL;
      gFormatRecord->data = NULL;
// De momento nos olvidamos de los icc profiles [TODO]
    //DoReadICCProfile ();
static void DoReadFinish (void)
    // Dispose of the image resource data if it exists.
    DisposeImageResources ();
    WriteScriptParamsOnRead (); // should be different for read/write
// write a history comment
    AddComment ();
// Clean some memory.
if( gMxiInfo->lightNamesList != NULL ){
    for( unsigned int i = 0; i < gMxiInfo->nMultilightChannels; i++){
      if( gMxiInfo->lightNamesList[i] != NULL ){
        delete[] gMxiInfo->lightNamesList[i];
        gMxiInfo->lightNamesList[i] = NULL;
    delete[] gMxiInfo->lightNamesList;
    gMxiInfo->lightNamesList = NULL;
if( gMxiInfo->bufferPreview != NULL ){
    delete[] gMxiInfo->bufferPreview;
    gMxiInfo->bufferPreview = NULL;
if( gMxiInfo->filename != NULL ){
    delete[] gMxiInfo->filename;
    gMxiInfo->filename = NULL;
if( cMax != NULL ){
    delete cMax;
    cMax = NULL;
static void DoReadLayerStart(void){
// empty
static void DoReadLayerContinue (void){
int32 done;
    int32 total;
VPoint imageSize = GetFormatImageSize();
// Set the progress bar data
done = gFormatRecord->layerData + 1;
total = gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers + 2;
// Dispose of the image resource data if it exists.
DisposeImageResources ();
uint32 bufferSize = imageSize.v * gFormatRecord->rowBytes;
int nPixels = gMxiInfo->width * gMxiInfo->height;
char* lightName = NULL;
// SET THE BLACK BACKGROUND
if( gFormatRecord->layerData == 0 ){
    gFormatRecord->data = (void*)new byte[bufferSize];
    for( int i = 0; i < nPixels; i++ ){
      ((float*)gFormatRecord->data)[ i * 4 ]     =
      ((float*)gFormatRecord->data)[ i * 4 + 1 ] =
      ((float*)gFormatRecord->data)[ i * 4 + 2 ] = 0.0;
      ((float*)gFormatRecord->data)[ i * 4 + 3 ] = 1.0;
    // Set the layer name.
    gFormatRecord->layerName = new uint16[64];
    gFormatRecord->layerName[0] = 'B';
    gFormatRecord->layerName[1] = 'a';
    gFormatRecord->layerName[2] = 'c';
    gFormatRecord->layerName[3] = 'k';
    gFormatRecord->layerName[4] = 'g';
    gFormatRecord->layerName[5] = 'r';
    gFormatRecord->layerName[6] = 'o';
    gFormatRecord->layerName[7] = 'u';
    gFormatRecord->layerName[8] = 'n';
    gFormatRecord->layerName[9] = 'd';
    gFormatRecord->layerName[10] = '\0';
// LOAD THE LIGHT LAYERS
else if( gFormatRecord->layerData < gMxiInfo->nMultilightChannels + 1 ){
    void* lightBuffer = NULL;
    void* alphaBuffer = NULL;
    byte foob;
    dword food;
    // Get the light buffer.
    bool res = cMax->getLightBuffer(
                           (char*)gMxiInfo->filename,
                           gFormatRecord->layerData - 1, IMAGE_DEPTH,
                           lightBuffer,
                           gMxiInfo->width, gMxiInfo->height, lightName);
    if(!res){
      *gResult = readErr;
      return;
    if( gMxiInfo->hasAlpha ){
      // Get the alpha buffer.
      res = cMax->getExtraBuffer(
                            (char*)gMxiInfo->filename,
                            "ALPHA", IMAGE_DEPTH, alphaBuffer,
                            food, food, foob);
      if(!res){
        *gResult = readErr;
        return;
    else{
      alphaBuffer = (void*)new float[ gMxiInfo->width * gMxiInfo->height * 3 ];
      for( int i = 0; i < nPixels; i++ ){
        // Only need to set the red channel.
        ((float*)alphaBuffer)[ i * 3 ] = 1.0;
    // Put them together.
    gFormatRecord->data = (void*)new byte[bufferSize];
    for( int i = 0; i < nPixels; i++ ){
      ((float*)gFormatRecord->data)[ i * 4 ]     = ((float*)lightBuffer)[ i * 3 ];
      ((float*)gFormatRecord->data)[ i * 4 + 1 ] = ((float*)lightBuffer)[ i * 3 + 1 ];
      ((float*)gFormatRecord->data)[ i * 4 + 2 ] = ((float*)lightBuffer)[ i * 3 + 2 ];
      ((float*)gFormatRecord->data)[ i * 4 + 3 ] = ((float*)alphaBuffer)[ i * 3 ];
    delete[] (float*)lightBuffer;
    delete[] (float*)alphaBuffer;
    // Set the layer name.
//LOAD THE EXTRA CHANNELS
if( ... ){
//READ THE RENDER BUFFER
if( ... ){
// User can abort.
if (gFormatRecord->abortProc()){
      *gResult = userCanceledErr;
      return;
// Commit the layer.
if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
// Update the progress bar.
(*gFormatRecord->progressProc)( done, total );
// Free memory.
if( gFormatRecord->data != NULL ){
    delete[] (float*)gFormatRecord->data;
    gFormatRecord->data = NULL;
if( lightName != NULL ){
    delete[] lightName;
    lightName = NULL;
static void DoReadLayerFinish (void)
// Nothing to do.
And that's the image that I obtain loading a 8 layer image:
The layers have transparency (when I set "transparencyPlane" to -1, or 0, or 1, or 2, or 3, or 4....., I got the same result!). The blending mode is still "normal". I had set it to "linear dodge" The "isVisible" param works OK.
Alpha 1 is still black.
Is possible that I need to set something in the .r file? I had to add "FormatLayerSupport { doesSupportFormatLayers }," to manage layers, for instance.

I used Time Machine to recover my Pictures folder. This created a folder called Pictures (original) but I cannot open it. There is a do not enter roadsign, red disk and white bar on it. How can I see the contents?

I used Time Machine to recover my Pictures folder. This created a folder called Pictures (original) but I cannot open it. There is a do not enter roadsign, red disk and white bar on it. How can I see the contents?

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac?

How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac? I've changed from a Macbook to a iMac because that one stopped working and I cannot use it anymore. I've been able to import all the data of the last backup of the Macbook when setting the new iMac, but I cannot access now to the old backups of the Macbook and there are information that wasn't in the last backup and I would like to recover. Thank you very much.

Yes, you can ..
Read Q17 here.
http://pondini.org/TM/FAQ.html
Strongly recommend his whole section.. 14-17 and read it carefully to understand the ways you can make TM work for you.

How can I see the contents in a Ref Cursor

I have this code:
CREATE OR REPLACE PACKAGE APOD_LOG.APOD_C3_LOG_API_PKG
AUTHID CURRENT_USER
AS
type rc is ref cursor;
PROCEDURE Fetch_Log_Spec
in_LOCAL_IP_VALUE IN BINARY_INTEGER,
out_RESULT_SET OUT rc
END APOD_C3_LOG_API_PKG;
CREATE OR REPLACE PACKAGE BODY APOD_LOG.APOD_C3_LOG_API_PKG
AS
PROCEDURE Fetch_Log_Spec
in_LOCAL_IP_VALUE IN BINARY_INTEGER,
out_RESULT_SET OUT rc
IS
BEGIN
DBMS_APPLICATION_INFO.set_module(module_name => 'APOD_LOG.API_PKG',action_name => 'Fetch_Log_Spec');
DBMS_APPLICATION_INFO.set_client_info(client_info => 'Calling with in_LOCAL_IP_VALUE = ' ||to_char(in_LOCAL_IP_VALUE));
open out_RESULT_SET for
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.100.1''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.200.1''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.100.123''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.200.123''') as MULTICAST_IP_VALUE
from
dual;
DBMS_APPLICATION_INFO.set_client_info(client_info => 'Called Fetch_Log_Spec '||to_char(SQL%ROWCOUNT)||' row(s) returned with in_LOCAL_IP_VALUE = '||to_char(in_LOCAL_IP_VALUE) );
END Fetch_Log_Spec;
END APOD_C3_LOG_API_PKG;
And I am trying to test it like this:
DECLARE
IN_LOCAL_IP_VALUE BINARY_INTEGER;
OUT_RESULT_SET APOD_LOG.APOD_C3_LOG_API_PKG.rc;
BEGIN
IN_LOCAL_IP_VALUE := 23374048;
-- OUT_RESULT_SET := NULL; How do I see this
APOD_LOG.APOD_C3_LOG_API_PKG.FETCH_LOG_SPEC ( IN_LOCAL_IP_VALUE, OUT_RESULT_SET );
END;
How can I see the dataset returnd by the OUT_RESULT_SET in SQLPlus or Quest ScriptRunner?

A ref cursor doesn't really contain rows but you can use them to reference a SQL statement that fetches the rows.
Re: returning resultset from procedure...or pkg

Recently I bought an Ipad, now I need to find the old owner, so he can unlock it, but the full e-mail isn't written. How can I see the old e-mail?

So, yesterday I bought an Ipad 3 16gb. when I unpacked it, I found that it is locked, so I need the previous owner to unlock it. For the bad cause, the owner is from UK, and I've bought it from a intermediary in Bulgaria. How can I see the full email so I can contact him?

Apple will not provide that information unless order to do so by a court order. Your only option at this point is to return it to the intermediary and get your money back. They should not have sold you a locked device. Then don't buy another device without confirming that it isn't locked, as explained under "how do I check for activation lock before buying a used device" in this article: Find My iPhone Activation Lock.

In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)?

Hello, all.
In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?

Click the search magnifying glass and uncheck "Search entire library".
Type in the name of the track.
Click the album of interest to show tracks.
Select the track.
Press the X in the search box to clear the search.
Double click the track you want to start playing first.
tt2

How can i see the "manage devices" in my itunes account? because i want to remove a device from using my apple id. tnx so much

how can i see the "manage devices" in my itunes account? because i want to remove a device from using my apple id. tnx so much

Thanks pvonk, I will try downloanding the book from the Iphone right now.......
Just tried to download and it wants me to buy it again? Is there some way around this? I guess I thought that was the whole point of the cloud, buy it once and access from any of your devices right?
Also, I have logged into the icloud.com as suggested and will plink around there for a bit and try to understand. It is just all so dang different that what I am used to; Apple's way, that is.
Thanks again for the Icloud tip and if you know of a way to download without making a 2nd purchase I would sure love to hear it!
Geez. one other thing (I guess I am complaining) but I bought more space in the cloud, they took my cash fast enough but have not yet increase the size of my storage space yet? Is Apple sometimes slow to get internal stuff done?

How can I see the url of a link before clicking on it?

Hi. I have Firefox 10.0.2. I used to be able to see the url of a link on web pages in the bottom left of the browser. That way, if I the url didn't seem legit I wouldn't click on the link. But now, when I put the mouse over a link, nothing comes up. How can I see the link addresses again? Thanks.

The Status Bar. where the link previously showed on mouse hover, has been replaced by the Add-on Bar. You can install the following add-on to get some of the former Status Bar functions back. The Add-on Bar must be turned on. The add-on will also stop the showing of the "tooltip" type status loading text, and will, instead, show it in the Add-on Bar:
*See --> https://support.mozilla.org/en-US/kb/what-happened-status-bar
*To turn on the Add-on Bar, see --> https://support.mozilla.org/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing#w_showing-the-navigation-toolbar '''and click on "Add-on Bar" to check it'''
*Add -on '''''Status-4-Evar''''': https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
*If necessary, after install and restart:
**Open Customze window (Firefox button > Options > Toolbar Layout '''''OR''''' View > Toolbars > Customize '''''OR''''' ALT+V+T+C '''''OR'''''right-click in the empty space at the end of the Tab Bar and choose Customize)
**'''While Customize window is open''', drag any or all of the following from the Customize window to the Add-on Bar in the order and position you want them to appear. Then click "Done" button at lower right on the Customize window.
***"Status Text" ('''''link on mouse hover or during page loading''''' or "Done" when page is loaded)
***"Progress Meter" (progress bar of page loading)
***"Download Status" (status of download)
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How can I see the tracklist in the Podcast app (like I can in the Music app in ios6)?

When playing a podcast in the Music app in ios6, I can tap the screen and see the track list. How can I see the track list in the Podcast app in ios7?

Dakota
The table MARV holds the current and previous values for the purchasing period and who changed them. The table is usually set for logging of changes and you may be able to find the history you want depending on how your database is setup. I hope this helps.
Regards
H

How can I see the MAD results in my planning book

Similar Messages

Maybe you are looking for