How can I select the name I want displayed in messenger with multiple contacts?

I have my wife's phone number in two phone book entries, one is her name, the other is under ICE which many emergency services use to contact your next of kin.  It stands for "In Case of Emergency" and since my wife has a different last name than me I want to keep it.  Every time she calls me the phone displays "ICE or Colette" and if my mother calls me it displays "ICE or Beverly" which is OK.  I know which one it is.  In messenger however my wife only comes up as ICE, even if I send a message to her named entry when she responds it comes up as from ICE.  My mother doesn't text, so it's not that big of a deal, I still know that ICE texts are from my wife.  But I want it to display her name if possible.  I've researched this a lot and have found nothing to cure it.
I've tried to add or delete the (1) country code in each entry which is what used to work on all phones before my 4S (I now have a 6).  Anyone have a clue?  Thank you, I know it's kind of trivial, but still I wish it would work correctly.

Beboni007,
Here is how matched length traces can be completed in Ultiboard.
First you do not necessarily need to setup a part group to do this... (differential pairs would require grouping)
1. Forward annotate your schematic / netlist from Multisim.
2. Determine the absolute minimum routing length from the origin of the net to the destination by routing a starter trace (remove/undo).
3. In Ultiboard, go to the spreadsheet view/ Nets tab and set the 'Topology' of interest to 'Star' for the traces you need matched.
 -> This changes the Max Length and Min Length in the Nets tab from N/A to a number allowing you to set the min/max trace length
4. Set the Min Length of the nets to an appropriate value for your application (it will need to be at least the value of your starter trace in step #2)
  -> Set the Max Length to the minimum + 50 mils or so (Ultiboard will do a relatively good job at attaining the minimum value but give it some room)
5. Go to the Autorouter/place settings and set the Routing mode to: Gridless (this will give the router flexibility to go off grid and match lengths)
6. Highlight the traces of interest and Autoroute these (Autoroute -> Autoroute Selected Nets).
Some Tips:
a. Do this routing first if possible
b. Restrict routing to a single layer if possible (restrict routing layers -> Routing Layers in the Nets tab)
Here is a simple example in Multisim: 
After autorouting in Ultiboard as described:
Hope this helps,
Regards,
Patrick Noonan
National Instruments
Attachments:
Matched Lengths.zip ‏44 KB

Similar Messages

  • How can I select the area I want linked, to other page?

    Hi,
    I have been creating multiple stand alone PDF files with links to various documents within a given PDF.  Up until yesterday I would select the Link Button, move my curser to the top left corner of the area to be selected, press the button and drag a box over the area I want selected.  It worked great.  Then BOOM, all of a sudden when I do that now it will not let me select the area I want, it will show a fixed box that appears to be snapped to a formatting line above or below the area I want.  Is there a setting somewhere that might have changed?
    Davey 

    Make sure you do not have the Snap to Grid option selected.
    In Acrobat 8, it is under the View menu.

  • How can I select the existing worksheet while using OLE2 to open the template workboo

    Source:
    application:=ole2.create_obj('Excel.Application');
    workbooks:=ole2.get_obj_property(application,'Workbooks');
    args := ole2.create_arglist;
    ole2.add_arg(args, 'c:\RptTemplate.xlt');
    workbook:=ole2.invoke_obj(workbooks,'Open',args);
    ole2.destroy_arglist(args);
    worksheets:=ole2.get_obj_property(application,'Worksheets');
    args := ole2.create_arglist;
    ole2.add_arg(args, 'Sheet1');      
    worksheet     :=ole2.invoke_obj(worksheets,'Select',args);
    ole2.destroy_arglist(args);
    Problem:
    1. While executing the above code, error -305500 occurs after executing "worksheet := ole2.invoke_obj(worksheets','Select',args)". How can I select the sheet i wanted in the template ??
    2. As I refer to the forms on-line document, it stated that the ole2 programmers documentation can provide all object types and methods that can be used with the OLE2. Does any link can provided to download the specified documentation ??

    The error is probably that your Worksheets variable is actually empty. Looking at your code I think the problem is that you try and get the value of the worksheets collection from the application then you should try and get it from the Workbooks object.

  • I'm trying to install an update to itunes that downloaded but can't complete installation as its trying to install onto D: drive. I don't have a D drive and i'm not given option of selecting the drive to install on. How can i select the drive that i want

    I'm trying to install itunes but can't complete installation as its trying to install onto F: drive. I don't have a F drive and I'm not given option of selecting the drive to install on. How can I select the drive that i want to install on?

    Hi,
    How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
       http://techtips.salon.com/make-windows-computer-pr​int-server-11914.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How can I change the name of item in TableViewController iOS

    How can I change the name of item in TableViewController? I want to be able to change the title of an item if I added one. Code:
    //  ViewController.m
    //  Movie List
    //  Created by Damian on 20/02/15.
    //  Copyright (c) 2015 Tika Software. All rights reserved.
    #import "ViewController.h"
    @interface ViewController ()
    These outlets to the buttons use a `strong` reference instead of `weak` because we want
    to keep the buttons around even if they're not inside a view.
    @property (nonatomic, strong) IBOutlet UIBarButtonItem *editButton;
    @property (nonatomic, strong) IBOutlet UIBarButtonItem *cancelButton;
    @property (nonatomic, strong) IBOutlet UIBarButtonItem *deleteButton;
    @property (nonatomic, strong) IBOutlet UIBarButtonItem *addButton;
    // A simple array of strings for the data model.
    @property (nonatomic, strong) NSMutableArray *dataArray;
    @end
    #pragma mark -
    @implementation ViewController
    - (void)viewDidLoad
        [super viewDidLoad];
         This option is also selected in the storyboard. Usually it is better to configure a table view in a xib/storyboard, but we're redundantly configuring this in code to demonstrate how to do that.
        self.tableView.allowsMultipleSelectionDuringEditing = YES;
        // populate the data array with some example objects
        self.dataArray = [NSMutableArray new];
        NSString *itemFormatString = NSLocalizedString(@"Movie %d", @"Format string for item");
        for (unsigned int itemNumber = 1; itemNumber <= 0; itemNumber++)
            NSString *itemName = [NSString stringWithFormat:itemFormatString, itemNumber];
            [self.dataArray addObject:itemName];
        // make our view consistent
        [self updateButtonsToMatchTableState];
    #pragma mark - UITableViewDelegate
    - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
        return self.dataArray.count;
    - (void)tableView:(UITableView *)tableView didDeselectRowAtIndexPath:(NSIndexPath *)indexPath
        // Update the delete button's title based on how many items are selected.
        [self updateDeleteButtonTitle];
    - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
        // Update the delete button's title based on how many items are selected.
        [self updateButtonsToMatchTableState];
    - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
        // Configure a cell to show the corresponding string from the array.
        static NSString *kCellID = @"cellID";
        UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:kCellID];
        cell.textLabel.text = [self.dataArray objectAtIndex:indexPath.row];
        return cell;
    #pragma mark - Action methods
    - (IBAction)editAction:(id)sender
        [self.tableView setEditing:YES animated:YES];
        [self updateButtonsToMatchTableState];
    - (IBAction)cancelAction:(id)sender
        [self.tableView setEditing:NO animated:YES];
        [self updateButtonsToMatchTableState];
    - (void)actionSheet:(UIActionSheet *)actionSheet clickedButtonAtIndex:(NSInteger)buttonIndex
        // The user tapped one of the OK/Cancel buttons.
        if (buttonIndex == 0)
            // Delete what the user selected.
            NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
            BOOL deleteSpecificRows = selectedRows.count > 0;
            if (deleteSpecificRows)
                // Build an NSIndexSet of all the objects to delete, so they can all be removed at once.
                NSMutableIndexSet *indicesOfItemsToDelete = [NSMutableIndexSet new];
                for (NSIndexPath *selectionIndex in selectedRows)
                    [indicesOfItemsToDelete addIndex:selectionIndex.row];
                // Delete the objects from our data model.
                [self.dataArray removeObjectsAtIndexes:indicesOfItemsToDelete];
                // Tell the tableView that we deleted the objects
                [self.tableView deleteRowsAtIndexPaths:selectedRows withRowAnimation:UITableViewRowAnimationAutomatic];
            else
                // Delete everything, delete the objects from our data model.
                [self.dataArray removeAllObjects];
                // Tell the tableView that we deleted the objects.
                // Because we are deleting all the rows, just reload the current table section
                [self.tableView reloadSections:[NSIndexSet indexSetWithIndex:0] withRowAnimation:UITableViewRowAnimationAutomatic];
            // Exit editing mode after the deletion.
            [self.tableView setEditing:NO animated:YES];
            [self updateButtonsToMatchTableState];
    - (IBAction)deleteAction:(id)sender
        // Open a dialog with just an OK button.
        NSString *actionTitle;
        if (([[self.tableView indexPathsForSelectedRows] count] == 1)) {
            actionTitle = NSLocalizedString(@"Are you sure you want to remove this movie?", @"");
        else
            actionTitle = NSLocalizedString(@"Are you sure you want to remove these movies?", @"");
        NSString *cancelTitle = NSLocalizedString(@"Cancel", @"Cancel title for item removal action");
        NSString *okTitle = NSLocalizedString(@"OK", @"OK title for item removal action");
        UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:actionTitle
                                                                 delegate:self
                                                        cancelButtonTitle:cancelTitle
                                                   destructiveButtonTitle:okTitle
                                                        otherButtonTitles:nil];
        actionSheet.actionSheetStyle = UIActionSheetStyleDefault;
        // Show from our table view (pops up in the middle of the table).
        [actionSheet showInView:self.view];
    - (IBAction)addAction:(id)sender
        [self.dataArray addObject:@"New Movie"];
        // Tell the tableView about the item that was added.
        NSIndexPath *indexPathOfNewItem = [NSIndexPath indexPathForRowself.dataArray.count - 1) inSection:0];
        [self.tableView insertRowsAtIndexPaths:@[indexPathOfNewItem]
                              withRowAnimation:UITableViewRowAnimationAutomatic];
        // Tell the tableView we have finished adding or removing items.
        [self.tableView endUpdates];
        // Scroll the tableView so the new item is visible
        [self.tableView scrollToRowAtIndexPath:indexPathOfNewItem
                              atScrollPosition:UITableViewScrollPositionBottom
                                      animated:YES];
        // Update the buttons if we need to.
        [self updateButtonsToMatchTableState];
    #pragma mark - Updating button state
    - (void)updateButtonsToMatchTableState
        if (self.tableView.editing)
            // Show the option to cancel the edit.
            self.navigationItem.rightBarButtonItem = self.cancelButton;
            [self updateDeleteButtonTitle];
            // Show the delete button.
            self.navigationItem.leftBarButtonItem = self.deleteButton;
        else
            // Not in editing mode.
            self.navigationItem.leftBarButtonItem = self.addButton;
            // Show the edit button, but disable the edit button if there's nothing to edit.
            if (self.dataArray.count > 0)
                self.editButton.enabled = YES;
            else
                self.editButton.enabled = NO;
            self.navigationItem.rightBarButtonItem = self.editButton;
    - (void)updateDeleteButtonTitle
        // Update the delete button's title, based on how many items are selected
        NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
        BOOL allItemsAreSelected = selectedRows.count == self.dataArray.count;
        BOOL noItemsAreSelected = selectedRows.count == 0;
        if (allItemsAreSelected || noItemsAreSelected)
            self.deleteButton.title = NSLocalizedString(@"Delete All", @"");
        else
            NSString *titleFormatString =
            NSLocalizedString(@"Delete (%d)", @"Title for delete button with placeholder for number");
            self.deleteButton.title = [NSString stringWithFormat:titleFormatString, selectedRows.count];
    @end

    Hey JB001,
    Sounds like you have more going on than just a simple issue with Home Sharing and more dealing with Wi-Fi syncing. Start with the article below and see if that may resolve it.
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    http://support.apple.com/kb/TS4062
    If it does not work out, then may I suggest contacting Apple for further assistance to walk you through it or just take that time that you were talking about to sort it out.
    Contact Apple Support
    https://getsupport.apple.com/GetproductgroupList.action
    Regards,
    -Norm G.

  • How can I change the name of a Sub Circuit in Multisim

    How can I change the name of a sub-circuit in MultiSim?  
    For example:
    I have a sub-circuit named "Output Channel 1" and its RefDes is SC1.  How do I change its name to 'Input Channel 1'?

    Hi,
    If what you want to change is the RefDes you can do it by right-clicking the sub-circuit and selecting properties. If what you want to change is the name, you can right-click the sub-circuit in the Design Toolbox.

  • How can I get the name of the column in Cursor

    hi,
    how can i derive the name of the columns in cursor
    e.g
    suppose I have a cursor
    cursor c is select * from emp;
    c1 c%rowtype.
    for c1 in c
    I want to display the name of the column how can I do. i don't
    remember the name, but i need it to be displayed tooo.
    thanx in advance
    Sreekant

    You can only do this by DESCing the tables in the cursor and
    then coding eg. v_no := c1.empno;
    APC

  • How can I change the name that my computer/iTunes assigned to my device?

    When I hooked up my new 4s to my desktop, it asked if I wanted to start with a new device.  I answered yes and the device was assigned a default name based on the name of the computer (which wasn't originally mine) so now iTunes recognizes the device as belonging to some dead guy I never met.  Also the same first name as an ex-bf.  Call me weird but this bothers me.  How can I change the name of the device?

    Select the device when it is connected to iTunes. Click in the device name on the summary tab. Enter what you want.
    tt2

  • While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

     Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place." 
    When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
    I have no other options to choose another font. Thanks for any help you can direct my way. 
    Debbie
          From: sukritd15 <[email protected]>
    To: Deborah Karr <[email protected]>
    Sent: Friday, February 13, 2015 5:35 AM
    Subject:  While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How can i select the next column instead of next row when press enter key

    I need to know how can i select the next column instead of next row when i press the enter key.By default ,when i press enter key the next row is selected and the column remain unchanged but I wants opposite that is the row should remain unchanged but column index will changed.
    Thanks to all.

    Well, the right arrow key will already move you to the next column, so the easiest way to do this is to modify the InputMap to have the Enter key invoke the same Action as the right arrow key.
    You can search the forum for my "Table Actions" (without the space) example that will show you how to do this.

  • I have an 8500a how, once I select the apps I want and add to the printer. How do i get them to wor

    I have an 8500a how, once I select the apps I want and add to the printer.  How do i get them to work? And is it always this slow....

    Hey jmknights!
    While I can't speak to how quickly the apps will work, I may be able to help you with how they work. Once you have the apps added to the printer you would select the app you want to print from on the printer's front panel. Once inside the app, select what you want to print and if all goes as it should, the printer should begin printing the requested information within a few seconds.
    Hope this helps!
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • How can I get the name of an internal table in a textfield?

    Hi,
    I have defined an internal table in a program. Now I need the name of thist table (<u>NOT</u> the components!!!) in a textfield.
    Example for Data-Definitions in my Program:
    data: begin of it_tab occurs 0,
            feld1  like icon-id,
            feld2  like icon-name,
          end of it_tab.
    data: tabname(30) type c.
    How can I transfer the name "IT_TAB" into the field tabname?
    Thanks in andvance!

    No, it has to by 'dynamic'. I don't want to transfer it hard, because it should work for any internal table name.
    The requirement is: There are many function modules that have an input field TABLENAME. I have to give the tablename in the Form 'IT_TAB'.
    But I look for a possibiltity not to write:
    tabname = 'IT_TAB'.
    For DDIC-Tables its not a problem, but I dont know a way for internal tables.

  • How can I know the name of the file that the user has currently open ?

    Hello
    I'm developing a module for x3dv.
    http://hiperia3d.blogspot.com/search/label/X3DV%20Module%20For%20Netbeans
    I am going to add a button to open the files when I click it.
    I just need to know how can I know the name of the file that the user has currently open in the editor. What variable holds it in Netbeans?
    Thank you
    Jordi

    If you are using the JFileChooser to open the document, I would create another class with this included:
    //initiate class variables
    private File f;
    //create JFileChooser
    JFileChooser fc = new JFileChooser();
    fc.setMultiSelectionEnabled(false);
    fc.setFileSelectionMode(JFileChooser.FILES_ONLY)
    //set the chooser to initialise File f with the file selected
    int status = fc.showOpenDialog(null);
    if (status == JFileChooser.APPROVE_OPTION)
         f = fc.getSelectedFile();
    public File getFile()
         return f;
    }

  • How can I change the name of my Mac from old company to my new one, How can I change the name of my Mac from old company to my new one

    How can I change the name of my Mac.  I am using it with a different company now and told want the old company name showing up on emails etc.

    Thanks.  When I rep;y to an email I get this
    SOS Medical <[email protected]>
    I would like to replace the SOS Medical with my company name

  • How can I change the name of my home folder?

    Just got a new job. Yeah! Taken over former employees' iMac. I made myself Administrator, seem to be the only log in option. But, my home folder is still in the old guys name. How can I change the name on the Home folder without deleting it and loose all the files? CAN'T loose the files?  Help...
    Thanks

    Changing the existing home folder name is complicated. I recommend you NOT do that.
    Instead, create a new User with exactly the home folder name you want, and copy your files over to that new user. Once a few days have gone by trouble-free, and you are certain you have no issues, you can delete the old home folder.
    While on the subject of users, Some users prefer the peace-of-mind of using an "ordinary" user account, rather than an Admin account for daily use. This makes it much harder for anything to "sneak" onto your Mac, as you need to authenticate anything to be installed in system directories.
    To do this, create a new Admin user, log into it, and demote your daily-use account to a non-Admin user. When actively installing stuff, the Admin username and password will be requested.

Maybe you are looking for