How can I send commands and recive rs232 with this Dll

/ programmer commands
INTERFACE char* (WINAPI DYNAMIC KeyCmd)( char const* cmd, char* rsp, int maxrsp);
INTERFACE void (WINAPI DYNAMIC DoCmd)(char const*cmd, char *rsp, int maxrsp);
Note: I see "char*", is this a pointer or a char String. I aspect to get Volt levels to plot a graph.

louX2,
char* is the same as LabVIEW's C String Pointer (CStr) data type. I would not worry about the const for the first character strings as this just means they will not be changed in the function.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

Similar Messages

How can I uninstall yosemite and reinstall Loin with out losing all my in formation and programs

How can I uninstall Yosemite and reinstall Loin with out losing all my in formation and programsThis had been the worst os system apple has come out, too many errors
too many to list.
a few
Losing all mail. and watching them disappear in front of my eyes and could nothing about it
also when accessing cloud the screen just rolls in when accessing mail, like loading and loading and loading for 1 to 2 minuets.
I did not up grade my Mac Book Pro, and is working fine,
Just my iMac, its act kile avid card and it only happens access iCloud mail.
so I want to and need to go back to Loin

You can't unless you have a current backup of your old Lion system because the first thing you must do is erase the drive. It 's possible to use Target Disk Mode between your iMac and the MBP in order to clone the MBP to the iMac. However, that will still erase everything on the iMac's drive.
Or you could see about getting Yosemite to work correctly. If you have IMAP mail, then your mail should be intact.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Download and install the 10.10.1 update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Download and install the 10.10.1 update.
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

How can I send commands to a stepper motor to move in steps?

How can I controll a stepper motor by using labview.7?
what do I need?

This will depend on what hardware you are using to send the commands to the stepper motor. NI offers motion controllers and drives that come with all the functions you will need to operate the motors. Depending on the size and number of motors, you will have different hardware requirements. Take a look at the motion products available here: http://sine.ni.com/apps/we/nioc.vp?cid=1506〈=US
If you have more questions, you can always contact NI at www.ni.com/contact to help spec out the system.
If you are using third party products, you will have to call their dll from LabVIEW using a Call Library Node function. This gives you access to all the functions in a dll.
Hope this helps.
Regards-
Julie S.
Applications Engineer
National Instruments

How can I send a personalized mass email with the mail app?

I need to be able to send a mass email where the "Dear So-and-so" is personalized for each recipient. Is it possible to do this with Mail? If so, how can I accomplish that?

you'll have to use a feature called "Mail Merge"
it works with either MS Word + Outlook
http://office.microsoft.com/en-ca/mac-word-help/use-mail-merge-to-create-a-form- letter-RZ103895371.aspx
or
Pages + Mail
http://support.apple.com/kb/VI129

How can I create public AND private access with a wireless VPN router?

I am thinking about getting one of the new pre-n wireless routers that has a builtin VPN. I will need to have a private net for my office and a public net for my customers. On the private side- my employees will need to access all network resources and servers etc. On the public side, my customers just need to get to the Internet and maybe print on that side too.
Both sides will be DHCP.
Can I set this up with 1 device ro do I need 2? How can I do this? Any help is greatlu appreciated.
Thanks all.
Message Edited by Gman on 10-14-200607:08 PM

The only safe way to do this is to creat user groups On your server and give specific assess to the users who log into the network.
Using a single router , bifurcating a public from a private network is not possible.You will not be able to use the VPN since the users hav e to be connected to the VPN to log into your network.

How can I send data from multiple range with VBA API ?

hello everyone,
i have one worksheet , multiple range. With addin , we can specified the range to retrieve or submit.
In smart view for retreive, I have the API retrieverange so I can do the same. But for submitting data, I only have the API "HypSubmitData" and it doesn't take any paramater like a rangebut only the sheet !
So how do you manager to do it ? one worksheet per range ?
thanks for answers

11.1.2.5.400 added the capability to perform range submission, however I doubt that the vba is not updated with the function. So you might have to wait for a while, or you can create a code which copied the selected cells to a hidden worksheet and perform submit from that sheet. Keep in mind that when the use make the selection, you'll have to copy the pov too.
Regards
Celvin Kattookaran

How can I control cc1 and cc7 together with my modwheel?

I would like to control controller cc1 (dynamics) and cc7 (Volume) at the same time with my midi keyboard modwheel, I believe I can make this happen with the help of a transformer object in the envirement, but am not sure. Anyone knows how to do this?
André

Understanding Home Sharing: http://support.apple.com/kb/HT3819
iTunes: Setting up Home Sharing in your computer, http://support.apple.com/kb/HT4620
Troubleshooting Home Sharing: http://support.apple.com/kb/TS2972

How can I share Quicken and other apps with another user on the same iMac?

I would like to share some apps including Quicken with anoter user on the same iMac. I have put the Quicken app and the .QFX file in /usrs/share and changed the permissions to R/W on both files but when I log in as the other user and run Quicken it does not use the .QFX file and instead comes up with no accounts.

The Quicken app. should be in the Applications folder at the root of Macintosh HD. It's accessible to all users from there.
To share a file, (this from Finder Help menu)
"Sharing files with others who use your computer
You can share files with others who use your computer by placing the files in the Public folder in your home folder. Anyone with an account on your computer can read or copy the items you put in your Public folder (except for your Drop Box folder, which only you can open).
To share files using your Public folder:
Copy the files you want to share into your Public folder, inside your home folder.
To give a copy of a file directly to another person, copy it to their Drop Box folder (inside their Public folder), where only they can see it."
When opening a file just double-click the file - it will open the application automatically.

How can I execute command passwd in solaris with Java (ProcessBuilder)

Hi all, my problem is that I want to change the user password in solaris 10, but from a Java programm, I was trying with ProcessBuilder but I don't know how insert the new password, Who can help me?

I'm not sure, but I think passwd is one of those programs that only lets itself be run interactively from a terminal.

I am facing lots of problems with security while using Mozilla. How can I send you a detailed report for this?

I am getting redirected to unknown sites whenever I open any site while using mozilla. Initially I thought that there is a problem with my device, but then I realized that this happens only when using mozilla, not with other browsers like chrome, IE, or opera.
These sites are mainly having the message 'Ad by ShopDrop'..
I am pasting below links to few sites to which I get redirected to
http://offers.bycontext<i></i>.com/scjs/tb/ctxjs/index<i></i>.php?kw2=www.espncricinfo<i></i>.com&affid=1151&subaff_id=725_724&intformat=roll&nextpage=http%3A%2F%2Fwww.espncricinfo<i></i>.com%2F&ch=421&sbrand=ShopDrop&folder=v4.19&typrd=ctx&cu=32929&country=IN&original_country=IN
http://add0n<i></i>.com/fastest-gmail.html?v=0.1.6&p=0.1.5&type=upgrade

hello, you have various malicious addons present. please perform all these steps:
# [[Reset Firefox – easily fix most problems|reset firefox]] (this will keep your bookmarks and passwords)
# afterwards go to the firefox menu ≡ > addons > extensions and in case there are still extensions listed there, disable them.
# finally run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.
[[Troubleshoot Firefox issues caused by malware]]

How can I send pictures I have taken with my phone? It keeps giving me an error msg about file too large.

This problem just started a three days ago out of nowhere. Any ideas besides the ones I have already read?

I assume you mean sending them in a text message. There is a size limitation in photos sent in a text message. Does your texting application not offer you the option of resizing the photo?
If you must send it full size, you would have to send it via email.

OT: How can I manage a "Please Wait" message with this scenario?

I have a page which allows you to paste in a potentially
large list of zip
codes.
When you submit this page, the list is de-duped, and then
checked against a
table of ~22,000 zips for matches.
Where and how in this process could I bring up a "Please
Wait" message while
the transaction is being completed?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================

> you could also just use the PVII script on body load to
show the
> appropriate div - you could change the name in the" with
the appropriate
> switch statement.
Ew. Double ew.
I'm going to let it ride as is, until someone complains.
Thanks for the
neurons, though. Do you need them back? Or I should say, "you
DO need them
back"!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"crash" <[email protected]> wrote in message
news:[email protected]...
> you could also just use the PVII script on body load to
show the
> appropriate div - you could change the name in the" with
the appropriate
> switch statement.
>
> It's my belief that some of your html elements will be
able to show while
> others are still being built. I guess I could be wrong
on this, but I
> think practically I'm right (ie, you can see elements on
my page building
> before the page is completely done).
>
> HTH,
>
> Jon
>
> "crash" <[email protected]> wrote in message
> news:[email protected]...
>> summation:
>> In your SQL, at the bottom of the statement, you
should be able to put a
>> javascript call that will re-structure the
visibility of the elements
>> according to the variabels returned by the SQL. One
page, reloaded once.
>>
>> My switch statement got a little convoluted. You
should be able to just
>> set one variable, or set one number and go from
there (ie, if $v=3, hide
>> other two), but i've not had any coffee or caffinne
yet.
>>
>>
===========================================================
>> Is the code in the third message on this post from
the originating page?
>> I took that it was, that it had a form, that form
reloaded the same page?
>>
>> If so, you should be able to put a switch in there:
>>
>> switch($stage){
>> case "upload":
>> #this should be once the form has been completed
>> $status=1; //status equal one, two or threee is one
method you could
>> use.
>> break;
>> case "complete"://you could aalso set a variable for
each section, i
>> think the one above is better, but this one made
more sense right now,
>> lol.
>> #show the results,
>> $resultsState="show";
>> $formState="hide";
>> $waitState="hide";
>> break;
>> case default:
>> #empty, or first state, show the form to upload the
data
>> $live="form";
>> break;
>> }
>>
>> then, below:
>>
>> <div id="form" class="<?php echo $formState
?>">
>> <form>
>> whatever
>> </form>
>> </div>
>>
>> <div id="wait" class="<?php echo $waitState
?>">
>> <img src="img/wait.gif" />
>> </div>
>>
>> <div id="results" class="<?php echo
$resultsState ?>">
>> <h1>Results</h1>
>> <p>stuff here</p>
>> </div>
>>
>>
>>
>>
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>>I can do that. I'm worried about passing the zips
array (which has been
>>>exploded from the input) to the process page. How
would I best do that?
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>> ==================
>>>
>>>
>>> "crash" <[email protected]> wrote in
message
>>> news:[email protected]...
>>>> THis is how I see the process, I guess I
might not be following you:
>>>>
>>>> 1. User goes to form page, to submit zips.
>>>> 2. User completes form, hits upload
>>>> 3. Page refreshes itself, publishes please
wait message (ie, could you
>>>> not put an if [form submit] is true, echo
this image, then begin the
>>>> sql calculations)
>>>> 4. As the calculations are finished, toggle
visibility of image off,
>>>> toggle div with results on.
>>>>
>>>> If that doesn't work, sorry, I completely
misunderstand and will leave
>>>> you be.
>>>>
>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> But then there's no opportunity to slam
the waiting message up
>>>>> there....
>>>>>
>>>>> --
>>>>> Murray --- ICQ 71997575
>>>>> Adobe Community Expert
>>>>> (If you *MUST* email me, don't LAUGH
when you do so!)
>>>>> ==================
>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>>> ==================
>>>>>
>>>>>
>>>>> "crash" <[email protected]>
wrote in message
>>>>>
news:[email protected]...
>>>>>> couldn't you just have it reload the
same page (isn't it anyway?).
>>>>>>
>>>>>>
>>>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>>>>
news:[email protected]...
>>>>>>> Thanks, Joe. This troubles my
mind, either way!
>>>>>>>
>>>>>>> --
>>>>>>> Murray --- ICQ 71997575
>>>>>>> Adobe Community Expert
>>>>>>> (If you *MUST* email me, don't
LAUGH when you do so!)
>>>>>>> ==================
>>>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM)
>>>>>>> Technotes
>>>>>>> ==================
>>>>>>>
>>>>>>>
>>>>>>> "Joe Makowiec"
<[email protected]> wrote in message
>>>>>>>
news:[email protected]...
>>>>>>>> On 23 Oct 2006 in
macromedia.dreamweaver.appdev, Murray *ACE*
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> LOL - OK, see, I was
hoping to avoid breaking it into separate
>>>>>>>>> pages
>>>>>>>>> like that, but that way
looks like it'll work....
>>>>>>>>
>>>>>>>> You can just re-call the
page which processes the form data, and
>>>>>>>> check
>>>>>>>> whether or not the
processing has been done:
>>>>>>>>
>>>>>>>> <?php
>>>>>>>> if ($dataWasProcessed) {
>>>>>>>> echo '<h1>Thank you
for using Murray's Data Processing</h1>';
>>>>>>>> } else {
>>>>>>>> // Code to process form goes
here
>>>>>>>> // Code to re-call page with
$dataWasProcessed set goes here
>>>>>>>> // How to set that var left
as an exercise for the reader
>>>>>>>> }
>>>>>>>>
>>>>>>>> Personally, I find that it
troubles my mind less to do such things
>>>>>>>> in
>>>>>>>> separate files.
>>>>>>>>
>>>>>>>> --
>>>>>>>> Joe Makowiec
>>>>>>>>
http://makowiec.net/
>>>>>>>> Email:
http://makowiec.net/email.php
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

How can i send group email

how can i send grop email from mac pro

Hi
This is from Apple Support Site:
http://docs.info.apple.com/article.html?path=Mail/10.7/en/mlhlp1014.html

How can I send multiple string commands into a VISA write?

Hi Fellow LabVIEW users
I am very new to LabVIEW (2.5 months) so please forgive me if my lingo is not up to par.
How can I send multiple string commands to a VISA write. For example each string command looks like this
1) 3A00 0000 0000 FFFF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0033 (Scenario 1)
2) 3A01 0000 0000 FFFF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0034 (Scenario 2)
3) 3A01 0000 0000 33FF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0067 (Scenario 3).
and so on and so forth. And there are a number of scenarios.
Each String scenario will give a different string output which will be interpreted differently in the front panel.
Right now I have to manually change the string commands on the front panel to give me the desired output. How can I do this without manually changing the commands i.e. hard coding each scenario into the block diagram?
Thanks, any feedback will help.
mhaque

Please stick to your original post.

How can I send commands and recive rs232 with this Dll

Similar Messages

Maybe you are looking for