How can I set Earliest Finish Time of Maintenance Order Operation

Hi,
I have set the following parameters under work center capacity tab.
Start: 07:30:00
Finish: 16:30:00
Length of Break: 01:00:00
No. of individual capacity: 1 (same will be maintained in order operation)
Capacity utilization: 100
Relevant for finite scheduling: Check on
Can be used for several operations: Check on
Long term planning: Check on
and have also set Parameters on OPU7
When I assign this work center on two operations of order having work defined as 8 & 8 respectively and put refresh order scheduling, then order header copies the following date and times from operations.
Schedule start date and time as: 13.12.2011 & 07:30
Schedule finish date and time as: 14.12.2011 & 16:30
But when I assign this work center on two operations of order having work defined as 8 & 7 (or any odd number) respectively and put refresh order scheduling then why order shows the following difference in schedule finish time that copies from 2nd operation?
Schedule start date and time as: 13.12.2011 & 07:30
Schedule finish date and time as: 14.12.2011 & 15:22
Can I exactly get 15:30 by using standard functionality of automation scheduling (Not forcefully)?
Please also tell, how can I bring Calendar Selection for Order field on order header?
Regards,
Edited by: PROCESSES EXPERT on Dec 13, 2011 5:31 PM

PROCESSES EXPERT wrote:
> how can I bring Calendar Selection for Order field on order header?
From within the work order, click the "Show further scheduling data" button to the right of the Priority field. If you change the calendar selection to "1" (From Order Header), you'll be able to enter the factory calendar ID.
Paul

Similar Messages

How can i set the date time year to my i pod

how can i set the date time year to my i pod touch

Hello Theodora,
You can do this via your iPod's Settings application.
B-rock

HOW CAN I SET TIHE NETWORK TIME BECAUSE IT DOESNT ALLOW ME TO SING IN

HOW CAN I SET TIHE NETWORK TIME in the apple tv BECAUSE IT DOESNT ALLOW ME TO SING IN

Welcome to the Apple Community.
Time and date should be set automatically by the network time server. There has been a number of posts reporting this problem. Solutions have involved:
Restarting the Apple TV by removing ALL the cables for a few moments.
Restoring the Apple TV.
Opening port 123 on the router.
Ensuring the DNS address on both the router and the Apple TV are those provided by your ISP.

How can you set the ctxsvr time interval ?

I would like to know how can i set the time
inteval between each update of the Intermadia
indexes.
Thanks.

stop and restart ctxsrv on specified intervals.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Lombar vincent ([email protected]):
I'd like to use the ctxsrv utility, because i want automatic index rebuild.
But Is it possible to set the time interval
between each update?<HR></BLOCKQUOTE>
null

On DPS how can I set the layers in the correct order for adobe viewer?

How can I set it so the icons appear behind the apple the same as the first picture but for adobe viewer as well

Turn the apple into a two state MSO set to autoplay once and stop on the last image.
I have a DPS course on lynda.com you might benefit from. If you don’t have a subscription, this link will get you a 10 day trial: http://bit.ly/1xHYd0i
You should also download Bob Bringhurst’s DPS Tips app from the app store.

How can I set up my time capsule as the primary base station with a centurylink router? I'm trying to extend my coverage, increase signal strength, and be able to connect a printer.

I recently moved and now I'm trying to set up my Time Capsule as the primary base station or router with an existing network that has a Centurylink modem/router. The TC still has the settings for my old network. I also have backups on it. I have the data backed up to another HD so it's not an issue to return it to factory settings if doing so deletes the back ups. Do I need to restore it to the factory settings to set it up? Also, what settings would I select on the TC (and the Centurylink modem/router) in order for the TC to serve as the router, instead of the Centurylink router? I want to be able to use the TC to back up my Mac's, print wirelessly, and improve overall performance. I tried setting the TC up and ended with 2 different networks. Can anyone please help me with this?

The TC has to plug into the existing modem router by ethernet.. you cannot use wireless.
You have a choice of which is router.. only if Centurylink agree to bridge their modem router.. this has to be done by the ISP and often they do not allow it.
Is your broadband cable or adsl or fibre or ???
If it is cable and you are allowed to purchase your own cable modem pick a pure modem version with no router in it.. plug the TC into it by ethernet.
Setup the TC in DHCP and NAT mode.. (depending on broadband type).
You must reset the TC to factory to do the setup.. no files are lost at all.
Here is my current recommended setup.. with Yosemite life has become harder than ever.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Here is why Yosemite has fundamental issues.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

How can I set up a time capsule to extend my wifi network from a non-apple Medialink MWN-WAPR300N?

I just purchased a new Medialink MWN-WAPR300N from Amazon to replace my old 2008 500 GB Time Capsule.
I was wondering if it would be possible to use my old Time Capsule to extend the network from the Medialink router to the rooms in the back of my house. Would this be possible? How about if I use the Time Capsule as the primary point, and use the Medialink router to extend the network?
Thanks!

The Time Capsule would not be compatible with a Medialink product if you are thinking of trying to use the Time Capsule to extend the Medialink network using wireless only.
The same would be true if the Time Capsule were the primary router, and you tried to use the Medialink product to extend the Time Capsule network wirelessly.
If you can connect the two devices together using a permanent wired Ethernet connection, then you should be able to accomplish your goal.

How can I set the query time out for SQVI?

Hi,
I want to setup query timeout for a particular user so that if his query (created in SQVI) takes more then say 10 minutes, it automatically times out and system resources are freed up.
How can I do this for a specific user? Also in case I cant do it for a specific user how can I do it for all users?
Thanks for reading

Hello Srikrishna,
The SQVI is a dialog transaction and henc its governed by your system's rdisp/max_wprun_time parameter.
A dialog work process has a run-time limit that prevents users from interactively running especially long reports. By default, the system terminates any dialog work process in a transaction that exceeds 300 seconds. Although the value of the limit can be changed (in the system profile parameter rdisp/max_wprun_time), that limit is always in effect for dialog work processes. No such limit applies to background work processes.
Regards,
Siddhesh

How can i set the network time on my appleTV?

Since the last update I have been unable to use my Appletv. It says it can't get the network time. I've restarted my router and unplugged the appleTV numerous times. I've heard others have this problem too. What is the solution?

Log into your iCloud account on your computer, then click your user name in the right top then click on the time zone in the popup window.

How can I set a Real time execution for application on windows 2000

I'm searching for a vi or a DLL that make me able to set an application thats run on windows2000 to a real time execution.
I can do it manualy by the task manager, but how to do it automaticaly by Labview?
Thanks
Benoit Séguin
Software Designer

> I'm searching for a vi or a DLL that make me able to set an
> application thats run on windows2000 to a real time execution.
> I can do it manualy by the task manager, but how to do it automaticaly
> by Labview?
>
Assuming all of the VIs are currently set to Same As Caller execution
system, you can affect all of the VIs below by setting a particular VI
to a higher priority.
Be careful that your VI is calling wait ms or releasing time to the OS,
or the time critical setting will cause the OS to ignore many of its
normal tasks.
Greg McKaskle

How can we set up a Time Capsule to run on a Verizon FIOS network that's already set up with its own router?

We have a Time Capsule that we want to use STRICTLY as a backup device and not as a router, which the setup system seems to want to do. We can't get beyond the option to switch the device to a new network, which we fear will disconnect a vital Internet connection. Any ideas?

Once you click Update at the end of the configuration process in AirPort Utility, the TC light should turn green in 25-30 seconds.
Close AirPort Utility as soon as you see the message that the settings have been stored to the TC as the TC will "disappear" from the AirPort Utility window.
Once you have a green light on the TC, if you need to access the settings again on the TC, you can do so be temporarily connecting an Ethernet cable from your computer to one of the other LAN ports on the TC. Open AirPort Utility and the TC will appear.
If you don't plan to use the wireless on the TC to provide another network, it would be a good idea to turn it off to help prevent wireless interference issues with the other wireless network.
To do this....open AirPort Utility and click Manual Setup
Click the Wireless tab below the icon
Change the setting for Wireless Mode to "Off"
Update to save the changes

How can I set custom socket time out value ?

I have tried to use httpclient, but it seemed that it didn't work. The time out value is still about 4 minutes, not 30s I set.
Anyone know this?
Thanks
Qing

What httpclient are you talking about?
The common way of configuring socket timeouts in Java would be through the setSoTimeout() method of the Socket or ServerSocket classes.

How can I set up my time capsule when I don't have access to our building's wireless router?

Our apartment includes internet but we do not have access to the router. We only want to use the time capsule to back-up our computer not as a wireless router. We have tried setting it up but the light flashes amber and it cannot set-up.

Cannot by ethernet for the first setup..put the TC in bridge mode and it should work fine.. There are a lot cheaper solutions to do this than a TC though.

How can i set a specific time for a transaction code to be run?

I want to know if a certain Transaction Code (not only the customized tcodes) could only be run on a specific time (ie. 4pm to 6am only)

There are two ways to achieve the purpose you wanted:
1. If the work to be done by this Tcode can be processed automatically without any interactive session (dialog user) then I would suggest it to process as Batch Job in the time period you specified. And make sure that none of the users are not having corresponding authorization to execute the same task in foreground.
2. If you need the Tcode to be executed only when you can monitor then the best way is to monitor the users containing the Tcode through SM20 audit log as a Mitigating control.
No such facility is currently available to protect a Tcode for a particular time interval in a day. You may write a message to SAP for suggestion.
regards,
Dipanjan

How do i set up my time capsule wifi for many users

hello ..
i have problem.. as always
my time capsule is connected to dsl modem (off(bridge mode)), in modem we can get only 10 ip adresses and no more. so when there are 10 pc connected to our wifi, no more can connect.... how can i set up my time capsule, so more people can join our wifi...? is it even possible?
P.S.
1) to our wifi is connected printer, so everybody can print...
2) every pc uses time capsule as bacup place in time machine.
tnx

You often see this limit of 10 clients in wireless hotspots but I have yet to see it in an adsl modem.. most strange way to pay for a service that is really irrelevant how many clients you use.
Have a go .. I recently setup a TC to help a guy run his Roku.. and this setup worked well.. I have no idea if it can work in your case.
Lets say the IP you get is 192.168.2.1-10 .. doesn't matter what it really is. And the adsl modem is 192.168.2.254
(Assuming they are private addresses.. if they are public IP you can just use the DHCP and NAT. )
But go to the airport utility.. I think you need to run v5 at least to change DNS.. but you can do the same thing in v6 using static but no dns changes.
Now you set the IP of the TC manually.. This address might need to be in the dhcp range of the modem to work. You can set the DNS to same IP as the router address.. ie home address of the modem. Or you can use another DNS.. whatever you like.
Then set DHCP for clients that will join.. this can then expand the scope of addresses..
It worked without a NAT error.. although I am not sure exactly how.. on paper it should not be able to work but did.. have a go.. otherwise there is perhaps another way.. but it is complicated.
Give us an example from a computer plugged into the modem of what IP .. subnet mask .. Gateway and DNS you get. Then I can fine tune the values for it.

How can I set Earliest Finish Time of Maintenance Order Operation

Similar Messages

Maybe you are looking for