How can I set my address or non mobile telephone number at home screen of my iphone ?

In case of loosing my iphone, the finder might contact me, if my contact details are at the home screen of my iphone.
How can I set this?

You cannot with the current iOS features.  It's just not possible to do that automatically.

Similar Messages

  • I just purchased a Thunderbolt Display for use with Photoshop work.  How can I set up to show/work in separate programs on each screen?

    I just purchased a Thunderbolt Display as an additional screen for Photoshop work.  Following set up instructions appears to allow only mirroring of the screens.  How can I set up to show/work in separate programs on each screen? 

    Yes, each blue rectangle is a screen. You can create different geometries, to suit your needs. For example, you can even make this kind of thing... :
    Or this:
    I don't know why you would want to do that, but you can!

  • Hi, how can I install an online iPad user guide icon on my home screen?

    hi, how can I install an online iPad user guide icon on my home screen?

    You Bookmark it to Favorite in Safari (tap to enlarge image)

  • How can I find MAC address based on the serial number of a missing IpodTouch 4th Gen?

    My Ipod touch 4th Generation is lost.  If I can find the MAC address, the Univeristy can help locate the device.  I have the serial number, is there any way I can find the MAC address based on the serial number?  I did not install a third party app on the IPod to help find it and it is not registered on iCloud, but I used it on iCloud.  Any ideas are greatly appreciated.

    Did you turn on FindMyiPd is Settings>iCloud and is the iPod connected to wifi? That is all that is needed for for Apple FindMyiPhone
    Maybe Apple can find the MAC address
    Apple - Support - iPod touch - Contact Us
    Your question has been asked in the past but no one has responded if Apple could actually help

  • HT1386 how can i remove the itunes logo and go back to the home screen

    how can i remove the itunes logo and go back to the home screenv

    If by "iTunes logo" you mean the image below, you need to connect your phone to iTunes and follow that directions that appear (which will probably tell you that you need to restore your phone).

  • How can i set up my itunes to automatically retrieve my photos and videos from my iphone when i connect it to my computer?

    when i connect my phone to the computer it used to auto retrieve my photos and videos, but some how it has changes, is there some setting that i change or somethig to auto upload my photos and videos from my phone to my computer?

    There is Settings > General > Restrictions > Require Password which you can set to '15 minutes' - the only other option for the setting is 'Immediately', you won't be able to have it as 2 or 3 minutes.

  • How can i set a homepage in ff mobile?

    Cant find a place for the default homepage url on FF mobile Nokia n900

    You don't set a homepage in FF for Android. It always starts with about:home showing your most visited sites. Check this article for more information.
    https://support.mozilla.org/en-US/kb/use-awesome-screen-search-web-bookmarks-and-more

  • How can  i set a image dinamically in a image component (ADF Mobile)?

    Hello everybody,
    I have to consume a rest service and get a url. This url is redirected to one image. After reading this image, how can i set he in a adf mobile image component?

    Hi,
    bind the mobile image component URL to a managed bean and have the managed bean. Then use the bean setter to set a new URL string and ensure (when creating the Java class for the managed bean) you have JDeveloper creating the property change event handlers.
    Frank

  • How can i set print mode at run time in smartforms???

    Hi expert,
    In smartforms how can I  set print mode at run time.
    I have one screen.In this screen one check box is there.If user select that check box then print should be come double side otherwise it is coming single side.
    If it is possible then plz give me answer asap.

    Hi,
    Set These settings
    While calling smartform, paas control_parameters and output_options as mentioned below and set
    user_settings = ' '.
    It will send the smartform output to spool.
    DATA: wa_output_options TYPE ssfcompop,
    wa_ctrl TYPE ssfctrlop.
    wa_output_options-tdimmed = 'X'.
    wa_output_options-tddelete = 'X'.
    wa_output_options-tdimmed = ' '.
    wa_output_options-tddest = 'LOCL'.
    wa_ctrl-no_dialog = 'X'.
    CALL FUNCTION lv_fm_name
    EXPORTING
    ARCHIVE_INDEX =
    ARCHIVE_INDEX_TAB =
    ARCHIVE_PARAMETERS =
    control_parameters = wa_ctrl
    MAIL_APPL_OBJ =
    MAIL_RECIPIENT =
    MAIL_SENDER =
    output_options = wa_output_options
    user_settings = ' '
    x_adrp = x_adrp
    IMPORTING
    DOCUMENT_OUTPUT_INFO =
    JOB_OUTPUT_INFO =
    JOB_OUTPUT_OPTIONS =
    EXCEPTIONS
    FORMATTING_ERROR = 1
    INTERNAL_ERROR = 2
    SEND_ERROR = 3
    USER_CANCELED = 4
    OTHERS = 5
    IF sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Regards,
    Kumar(Reward if helpful).

  • HT4108 How can I set my i phone to send a video signal to my television?

    How can I set my I phone to send a video signal to my television?

    iphone's earlier then iphone4s don't support mirror so only apps which support the old tv out works like photo app and youtube and video app
    composite being the worst resolution tv output out there does not support airplay mirror even with iphone4s
    test with the supported apps

  • I just got a MacBook Pro computer.  When I turn it on it opens up immediately to my email.  How do I shut that off so I just get the blank home screen?  Thanks.

    I just got a MacBook Pro computer.  When I turn it on, it opens up into email.  How can I shut that off so I just get the blank home screen?

    Before shutting off the computer, click Mail in the menubar and select Quit Mail
    from the dropdown.

  • I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

    I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
    I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
    Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

    Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
    I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
    I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
    Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

  • How can I set up an E-mail address?

    Hello,
    I just buy a mac book. I have created an e-mail address for i chat (mac.com); I want to use the same address to read my E_Mail, therefore I tried several times to set up this new address in the software "Mail" but it does not work.
    I have see that the mobileme address are not used anymore...but how can I set up this new E-mail adress?
    Thanks to help me
    Regards

    Try changing the email address using https://appleid.apple.com/
    If you can't change it with that site, you'll have to create a new account.

  • In EIC, how can we set the SLA of a subcategory to none SLA-related.

    Hi Experts,
    This is our current setup in EIC...
    Category 0501 has an SLA of 8 hours. Subcategory 050101 has to be none SLA relevant. But if we put zero or blank to the SLA Target Value field, it will automatically have a due date defaulted to today. If we will not indicate 050101 on the configuration, it will have the 0501 SLA of 8 hours.
    How can we set the 050101 SLA off?
    The path: IMG --> Personnel Management --> Employee Interaction Center (EIC) --> Interaction Center Web-Client --> Application Functions --> Activity --> Service Level Agreement (SLA) --> Define SLV Properties
    Thanks in advance.

    Hi Harish and Jarret.
    @Harish, I already tried unchecking the checkbox of the Display field but the problem with this is, it will also apply for the rest of the categories. It should only be for this specific subcategory.
    @Jarret, apology, but can you explain to me further about your instruction/advise? I get the feeling that we're on to something with your advise but I didn't quite get it on how to exactly.
    1. You should build the SLA from the lowest level up...
                        -I'm not really sure how, actually.
    2. If you have 8 subcats... will put the 8 entries in the table...
                        -where do I put the 1 subcat? This is because if I don't put that "No SLA" subcat in the table, the due date of that specific subcat will automatically appear todayu2019s date.
    Thanks for both of you. I really appreciate your help. 

  • How can we set the Order block for One-Time Billto-address?

    Hi Experts,
    How can we set Order bolck,if user uses one-time bill to address and needs to trigger workflow for releasing process according to order block.
    Please suggest me.
    Thanks and Regards,
    Kiran

    suggest me pls!!!!

Maybe you are looking for

  • Lync Reverse Proxy Alternatives

    When migrating from OCS 2007 to Lync 2010, we balked Microsoft’s recommendation to deploy Forefront Threat Management Gateway (or ISA) just to get the reverse proxy services.  TMG is way too expensive and complex for such a limited, simple use case.

  • Please Help Get a Color from Pixel !!!!

    Is anybody know how to get a Color from pixel. My program is not Full Screen . So i think Robot.getPixelColor() don't suitable. Please Help me!

  • Magic mouse - bluetooth extension

    My mac is in an adjacent machine room from my office. Unfortunately, the bluetooth signal is not strong enough to pass through the wall and my magic mouse is not working. Is there a good bluetooth repeater that would boost the signal? Thanks!

  • Adobe 8.1.2 Problems to make printing

    I will try to explain myself in english but may natural language is French I try to make some printing from the electricity company, but when select the printer, adobe says impossible to print, contact the sales, or versionn 8.1.2 french is free for

  • PO for Particular VENDOR.

    hi MM, how can i find the PurchaseOrderNO for particular vendor? in MIRO tcode we want to hava PO, REF & VENDOR. I am able to the REF and VENDOR but unable to get the PO for this PArticular VENDOR. Can i have some help pls? thank you,