How can I show a pop up menu based on the selection in a previous pop up menu?

For example, if "Company" is selected in a pop up menu in C6, then show another pop up menu in C7. if "Bob" is selected in a pop up menu C7, show another pop up menu that contains the talks "Bob" has in C8.
I am trying to create a talk scheduling spreadsheet with different talk outlines for different speakers. I'm not sure if there are any functions or formulas that can accomplish this. Can anyone help?

Pop-up menus contain fixed values in Numbers. You might be able to do this using Steppers or sliders. These produce a numerical result, which could be used to direct a second slider or stepper's output to a specific column or table.
If you can provide a map of the structure of your list(s), there may be someone here able to take on the task of constructing the tools to do the job.
Regards,
Barry

Similar Messages

How can I show or hide an image based on screen size in CS6?

I have a web site built using Dreamweaver CS6. I used the fluid grid layout to have different views for each of the 3 types - phone, tablet, desktop. It works well, resizes as it should. I would like to be able to show an image in the desktop version but not the mobile version. How could I do that? I can see in the .css file that different size screens can have their own different settings. Is there code I could add that would hide/show and image based on the users viewport on the same page? Let's say I have a div tag named picture. How could I add a parameter to the picture div tag in the style sheet that would hide the image if it was mobile?
thanks,
Marilyn

Insert image into a container div.
Desktop CSS:
#divName {
height: xxxpx
width: xxxpx
Tablet & Mobile CSS:
#divName {display:none}
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

How can i used pai in screen 1000 to change the select-options field?

hi,all.
I want used pai to change the select-options field,but it can't works.
the mainly code is:
REPORT ZTEST99.
TABLES :MARA,MAKT,MARC.
SELECTION-SCREEN BEGIN OF BLOCK B0 WITH FRAME TITLE TITLE0 .
select-options:s_matnr for mara-matnr,
               s_werks for marc-werks MODIF ID ID1.
SELECTION-SCREEN END OF BLOCK B0.
parameters:p_flag as checkbox.
at selection-screen OUTPUT.
   LOOP AT SCREEN.
   IF P_FLAG = 'X' .
   IF screen-group1 = 'ID1'.
         screen-input = '0'.
    ELSE.
      screen-input = '1'.
    ENDIF.
    MODIFY SCREEN.
ENDIF.
    ENDLOOP.
START-OF-SELECTION.
CALL SCREEN 1000.
when i click p_flag,then i want to change s_werks from OBLIGATORY to no OBLIGATORY.
how can i realized?
Thanks for all.
Sun

Hi ,
change your code like this.
Change in your code:
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : s_matnr for mara-matnr,
s_werks for marc-werks MODIF ID ID1.
SELECTION-SCREEN END OF SCREEN 100 .
At selection-screen.
if sy-dynnr = '100'.
IF P_FLAG = 'X' .
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-required = '0'.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
else.
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-required = 1.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
my code :
REPORT Z50871_SELECTOPS_DYNAMIC.
PARAMETERS : CH_EBELN AS CHECKBOX,
             CH_VBELN AS CHECKBOX.
DATA: V_EBELN TYPE EKKO-EBELN,
      V_VBELN TYPE VBAK-VBELN.
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : EBELN FOR V_EBELN MODIF ID G1,
                 VBELN FOR V_VBELN MODIF ID G2.
SELECTION-SCREEN END OF SCREEN 100 .
AT SELECTION-SCREEN OUTPUT.
IF SY-DYNNR = 100.
    IF CH_EBELN = 'X' AND
       CH_VBELN = ''.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G1'.
          SCREEN-ACTIVE = '1'.
        ELSE.
          SCREEN-ACTIVE = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ELSEIF CH_VBELN = 'X' AND
       CH_EBELN = '' .
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G2'.
          SCREEN-ACTIVE = '1'.
        ELSE.
          SCREEN-ACTIVE = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ELSEIF CH_EBELN = 'X' AND CH_VBELN = 'X'.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G1'
           OR SCREEN-GROUP1 EQ 'G2' .
          SCREEN-ACTIVE = '1'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF SY-DYNNR = 1000.
IF CH_EBELN = 'X' OR CH_VBELN = 'X'.
    CALL SELECTION-SCREEN 100.
ELSE.
    MESSAGE I000(Z50871MSG) WITH 'Please select atleast one checkbox'.
ENDIF.
ENDIF.
regards
Sandeep Reddy

How to populate a dropdown based on the selection from a previous dropdown?

I am currently trying to build a spreadsheet with three different dropdown menus to choose from. Based on what is selected from the first drop down though affects what choices are displayed for the next dropdowns. Is this possible in Numbers? Or should I look for other alternatives for what I'm trying to do.

Dynamic dropdown (pop-up) menus is not possible in Numbers directly. If you use scripts you may be able to cobble something together.
If you REALLY want pop up menus then place ALL the choices in a single pop up grouped together

HOW CAN I PLACE 2 PUSHBUTTONS SIDE BY SIDE ON THE SELECTION-SCREEN?

i want to place 2 buttons but using my code, the other goes below the first. Can anyone help me?

hi,
write as below
selection-screen: pushbutton 10(30) text-003 user-command
clk1 modif id sg1,
pushbutton 50(50) text-004 user-command clk1
the push buttons appear in the same line.
reward if useful,
thanks and regards
Edited by: hema bobbili on May 23, 2008 6:58 AM

How can I show my scanner in Photoshop import menu?

How can I show my scanner in Photoshop import menu?

Does it not appear when you go to Import > Images from Device? Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

How can I show icon Services for Object in PA30 Infotype 0019

Hi guy.
How can I show icon Services for Object in PA30 Infotype 0019 ?
This icon display in some infotype example infotype 0024(Qualifications).But I wanna use in Infotype 0019.
I don't wanna use menu "Assign facsimile".
Best regards.
Chutima.

Sorry - should have said I'm using JDev 10.1.3.0.4 with JSF & ADF BC.

How can i show 2 videos at once imovie09?

How can i show 2 videos at once using imovie 09?

camro1050 wrote:
Yes I mean 2 video side by side. How do I do that in iMovie 11?
From iMovie Help:
To add a side-by-side clip:
Make sure Advanced Tools are turned on.
Open the project you want to add the side-by-side clip to so that it’s showing in the Project browser.
In the Event browser, select a video clip or a frame range that you want to use as a side-by-side clip, and then drag it over a clip in your project.When you see the green Add symbol, release the mouse button.
In the contextual menu that appears, choose “Side by Side.”In the Project browser, the side-by-side clip appears with a blue border around it above the video clip you added it to, at roughly the spot where you added it (toward the beginning, middle, or end of the clip).
Depending on the length of the side-by-side clip you added, it may extend beyond the clip you added it to (only if there’s another clip after the clip you added the side-by-side clip to). You can drag the split-screen clip so that it begins at a different point in the main clip. To reposition where the split-screen clip appears in the project, drag it to a different clip.
Play back the effect by placing the playhead (the red vertical line) anywhere before the side-by-side clip in the Project browser, and then pressing the Space bar.Press the Space bar again to stop playback.
John

How can we show data in rows when it is in Columns........

I have strucked with a simple but a complex problem.
I have a Report with data in vertical rows..need of the hour is how can we show that data into column structure.
here is the table sample which i have in Database..
Location      chrg_type    Effective_date
xxxxxxx        xxxx          xx-xx
thhis is the structure in effective date we have several months in it in a single column i want show the effective date or effective month in various columns instead of a single column.
my required table is....
                            Effective_date     Effective_date
Location      chrg_type     xx-xx              xx-xx
xxxxxxx        xxxx          xx-xx
any tough heads?????

Hi Sunil,
Your 1st problem is that you are going to need one more field to accomplish you goal. What type of data do want under your new date columns?
Anyway, once you have that you need to move on to how to move the data out into columns based on date.
Try something like this.
0_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',CurrentDate) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',CurrentDate)
THEN {tbl.DataField}
1_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -1, CurrentDate)) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -1, CurrentDate))
THEN {tbl.DataField}
2_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -2, CurrentDate)) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -2, CurrentDate))
THEN {tbl.DataField}
... Repeat this process until you have all of the columns you need, following this format.
Hope this works for you,
Jason

Forms 6.0-- How can I show records in a block in different colours.

In a multi record block, how can I show few records in one colour and few more in a different colour depending on a condition.

Use DISPLAY_ITEM.
This will change the visual attribute of the item in the current(!) record,
set_item_property changes the attributes of the item in all(!) records.

I want to order a second copy of an iPhoto book. Thought created in the smaller format only the larger format is showing. How can I switch an existing iPhoto book back to the smaller format?

I want to order a second copy of an existing iPhoto book. Though created in the smaller format now only the larger format is showing. How can I switch an existing iPhoto book back to the smaller format?

To change a book size duplicate it (select the book in the source pane and press command and D) since text flow and picture placements can change due to the size differences - then click on change themes, select the same theme and the new size
check it carefully
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

HOw can i show a table(name given in parameters) in a report program

I made a report in which there is a paremeter asking for a table name ....
PARAMETERS TBLLE_NAME(10) OBLIGATORY.
Now when I enter the table namke then how can i show its values....
HINT:- We have to use fiels symbols....AND THE USER CAN ENTER ANY DDIC TABLE NAME having some records ...........

You can display the contents of the DB table inputted using ALV.
Pass the Structure name as the DB table name inputted.
Use CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE to create the dynamic table of the same structure as the DB table passed.
Once the above steps are done, the internal table with data can be displayed using ALV.
Reward points for all helpful answers.
Thanks,
Balaji

How can I show album art in the mini player when playing songs from a plugged in iPhone?

How can I show album art in the mini player when playing songs from a plugged in iPhone?
When I play from my phone and switch to the mini player it's always showing the music notes in the thumbnaill. It'd be nice if it could get album art off of the phone.
I'm on iTunes version 11.0.4.4

He @mracole,
it is very nice that you post a solution to complete the library with artwork for album's that do not have an artwork. Your solution perfectly addresses the problem for assigning artwork, BUT this thread is about CHANGING artwork for albums already uploaded into iTunes Match. Just try to replace for example a blue artwork cover for an album with a red one. If you made it in a simple way (without deleting the album from iTunes Match and local changes on the files with an external ID3-Application or 2 or more iTunes libraries on different Mac's) this is the right place to give a solution. I really tried for hours to change the artwork to make them visible in landscape cover flow mode on my iPhone5. In rare cases I made it, but then the covers sometimes where restored to the old onces - exacly how it is mentioned by Starhawk
As long as there is no simple way to change the cover of an iTunes Match stored album (you can change title, artist and so on without hitting "update iTunes Match" over all distributed Library on different devices - this date will be synchronized almost instantly) I considered the behaviour from iTunes as BUGGY! For me the local artwork cache (and if there is any iCloud artwork cache - I don't know) do not interfere with iCloud. Even when I delete the whole local cache (album artwork music - everything) I do not manage to change the artwork.
Regards from Munich, Germany

How can i show Bcc in my outgoing emails for Mac Lion 10.7.2

How can i show Bcc in my outgoing email for Mac Lion 10.7.2 Bcc does not highlite in View.
Noomee

Reset the SMC: http://support.apple.com/kb/ht3964
Should fix just this sort of thing.

How can I show a 0% range in the data value label on a bar chart thanks?

How can I show a 0% range in the data value label on a bar chart thanks?

I'm not sure what the question is.
I know that if you have a bar chart and one of the categories (X-axis) has bar (Y value) equal to 0%, no bar is plotted for that category. Even the addition of a stroke (line) around the bars doesn't make one appear for 0%. The only automatic way I know of to make it look like there is data in that category is to add the value labels to the bars. Inspector/Chart/Series, select one of the bars on the chart, click on "value labels". Another method that is a workaround is to fudge the number a little in your table so that instead of 0% it is a very small %. This will get you a thin line on the chart.
But if your question is about the value labels (the numbers that display on or in the bars) and you are not getting one for a bar that is supposed to be 0%, it probably means your table doesn't actually have a 0% in the corresponding cell. A blank cell in the table will not get a value label.

How can I show a pop up menu based on the selection in a previous pop up menu?

Similar Messages

Maybe you are looking for