How to Capture the Variables Value into the

Using JSLT part of the Jdeveloper/Jheadstart, ADF/Struts Framework.
I'm capturing the value fine using the following,
<c:set var="CvInformationFirstName" scope="request" value="${bindings.CvInformationFirstName.attributeValue}"/>I can even show the value without any problem,
<%-- Show the saved values --%>
<c:out value='${requestScope.CvInformationFirstName}' />Right here, we I try assigning the value of the firstname to a field, I can't accomplish this since I just don't know how to do it,
<html:text name="CvInformationBean" property="CvInformationFirstName" size="10" maxlength="10"/>
Any help will be greatly appreciate it.
Oracle Group

I am not sure what it is you are trying to accomplish. What do you mean with "assigning"? It is a business rule where the FirstName and LastName fields of the master need to be equal to the FirstName and LastName of the details, or is it the other way around? Anyway, it seems you are trying to get this business rule implemented by playing around with <html:text> elements in the JSP. You can't do it that way. Those <html:text> elemens are "two way". When the page is shown they determine which values get shown. Then, when the user enters new values and submits, they determine where those values are stored. If I understand what you are trying to accomplish correctly, you are trying to show values from one place, but submit them to another place. That can't be done strictly at the JSP level (not unless you use JavaScript anyway).
But then again, I may be misinterpreting what you are trying to do. Could you provide some more details about what the desired functionality is?
Finally, may I remark that this is the JHeadstart Forum, where you can communicate with other JHeadstart users all over the world. Also you may have noticed that the JHeadstart Team monitors this forum, and as such it is used as a means of providing some support for JHeadstart users that run into bugs or problems with the JHeadstart Tool (JHeadstart is a Consulting product that does not come with official "Metalink" support). But your problem is obviously not a bug in JHeadstart, you are just wondering how to implement some additional functionality that our Generator does not generate. So I hope you understand that if you get any assistance on this forum with your problem, either from the JHeadstart Team or from other JHeadstart users, it is not because you have a right to it, but because we're a bunch of friendly people out here that like to help out where we can. Demanding a reply like you did with your last two posts (an hour apart!) is really not done.
Kind regards,
Peter Ebell
JHeadstart Team

Similar Messages

How to pass a variable value into a custom planning function via a web

Can some one tell me
How to pass a variable value into a custom planning function via a web template?
What are the different types of Planning function parameters available and what is the difference between them?
Thanks
babu

Hi Sutrtha,
Yeah I got the pop up asking to select the variables used, I have selected ENTITY_ID that was used by the interfaces, but on execution of the package the Scenario did not work as the passeed variable #ENTITY_ID is set to 0 instead of the value I am passing.
Am I missing something?
Regards
B

How to pass a Variable value into an ODI Scenario from ODI Package

I have created an Interface that uses the variable #ENTITY_ID for retrieving entity data from the DWH; now I have generated a Scenario from the interface and placed the Scenario in an ODI Package; am not sure how to pass the #ENTITY_ID variable to the ODI Scenario?
Any help is greately appreciated.
Best Regards
Bee

Hi Sutrtha,
Yeah I got the pop up asking to select the variables used, I have selected ENTITY_ID that was used by the interfaces, but on execution of the package the Scenario did not work as the passeed variable #ENTITY_ID is set to 0 instead of the value I am passing.
Am I missing something?
Regards
B

How to set a variable value on the BPC Data Manager

Hello BPC Experts,
I'm creating a BPC10 NW version demo environment for our prospect customer.
I made a data manager to import BW data into BPC model from BW cube.
I need to import just one month data into BPC from the BW cube that has more than one month data.
When I run the data package manually, I can select a member of the time dimension prompt and I can import specific month data I want.
But, in a case where the program (data manager) runs by JOB monthly,
I can't select a member of the time dimension prompt manually.
So I want to know how to set a variable value to the time dimension prompt from a system date etc. automatically.
Are there any way to set a variable value to the time dimension prompt on the data manager automatically from a system date?
Or, do you have any other solution to import just one month data into BPC from the BW cube that has more than one month data by the data manager running on JOB ?
(without selecting a member of the time dimension prompt of the data package manually)
Thanks in advance,
Keisuke

Hi Gersh
Sorry for my late reply and thanks for your helpful information.
I tried the second way of your information and I could configure it.
And I 'll try first way of your information.
Regards,
Keisuke

How to Capture the user command value instead of ucomm and pfkey from syst

Hi,
How to capture the value of enter key in the enhancements.
Iam getting the sy-ucomm value as space. Please let me know the better solution ASAP.
regards
Nagendra

Hello,
If is a module pool program, take a look to the variable defined to receive the user-command (you can see this in the screen painter).
Regards.

How to capture the values given in SSC1 transcation?

Hello All,
Can anyone suggest me, how to capture the values given in SSC1 transaction?

Hello Clemens Li,
Requirement: Integration of SAP Appointment Calendar with Gmail Calendar
If I create an appointment in SSC1 transaction, it will appear in SAP Appointment calendar. The same thing should get updated in Gmail calendar of SAP user and also in the guest Gmail calendar if exists in appointment.
So, I have to capture the input values given in SSC1 transaction while creating an appointment in SAP and try to export those values to web services using some function module. Sending those values to web services completes my task.
Means, if I create an appointment in SAP, at the same time, the values which I gave must get exported to some object. So that I can send them to web services.
But my actual problem is with capturing the input values given to SSC1 transaction.
How can I get those values out to some internal table?
Another one is, I did not found any BADI to enhance SSC1 transaction so that I can include my code there.
If you know any enhancements in SSC1, please let me know.
If you want any more clarification, please let me know.
Thanks for the response
DNR Varma

How to capture the row value in Advanced Table on OAF ?

Hi:
I was wondering, if anyone has any idea as to how to capture a row value on an advanced table on a OAF Page.
I am currently trying to capture the Expense Report Number ( first column) on the Track Expenses Reports table on the page /oracle/apps/ap/oie/webui/HomePG.
Any idea would be helpful ?
Thank You

Hi,
856070 wrote:
This is what I am looking for :
Default Functionality
On the expenses home page there is a table for the Submitted expenses Table ( advanced table) with multiple Expense Number rows , which has a link associated with every expense number. When the user clicks the expense number link , EBS takes you to a more detail information page. ---As per default functionality :::whene ever user clicks on link it will takes u to details info page based expense no right.
---Check the property of the Destination URL of the ExpensionNumber column.
---In this property u can find the page path and paramam ex:pexpencenumber.
Customized functionality
I would like to capture the Expense number on the detailed page to call another application based on the expense number. The expense number on the
detailed page is not available on the request-parameter or on the VO.
I was thinking of capturing the ExpenseNumber when the user clicks it and save the expense number on a >transientvalue to retrieve it on the detaile dpage..but unable to do so.---Here get the paramereter pexpencenumber and pass it to another appilcation.
Regards
Meher Irk

How to capture the string values

Hi Gurus,
Could you plz suggest me how to capture the string value.
My requirement is.
I have a structure field called cnj_stat-sttxt_int and it is storing a value like "REL CDRT AVAC". AND the moddile value CDRT will change according to condtions. now i required to write a logic like if cnj_stat-sttxt_int field contain 'REL' and 'AVAC'. I HAVE TO THROW SOME ERROR.
SO please give some idea about on it...
Its urgent..
points will be rewarded...
Thanks in advance!!!!
Thanks & regards,
Kranthi.

if cnj_stat-sttxt_int field contain 'REL' and 'AVAC'. I HAVE TO THROW SOME ERROR.
if cnj_stat-sttxt_int CS 'REL' and cnj_stat-sttxt_int CS 'AVAC'.
THROW SOME ERROR.
endif.

How to capture the first execution of a report

Hi,
I am executing a report in background. The first time the report is executed I have to do a different processing. After the 1st execution I have to different processing.
Someone please tell me how to capture the 1st execution of a report. Is there a system variable ?
Appreciate your <removed by moderator> response.
Thanks,
Dikshitha G
Edited by: Thomas Zloch on May 12, 2011 11:36 AM

Keshav.T wrote:
Are you going to create a Z table for this ???? ... Is there nobody to advice you in your firm ???
Hello Keshav,
A couple of years ago i would have recommended using the INDX table, but it has got it's demerits.
Maintenance of Z-table is easier than the INDX table. Say there is some error in the program & you want to override the flag. Will it be easier to do so in the INDX table or via SM30 for the Z-Table?
As a matter-of-fact i will recommend using the solution provided by Florian the TVARVC technique.
1. Create a parameter(specific to your program) & transport it.(See the trxn STVARV)
2. In your program check the value of this param & set it accordingly.
Using TVARVC you will 2 birds with one stone:
1. You don't have to create a custom table.
2. Easy maintenance via STVARV trxn.
Hope you get the point!
Cheers,
Suhas
PS: In our system we have a Z-table designed specifically for this particular purpose. All the programs having this kind of requirement refer to this table.

How to capture the table update

How to capture the table update.Suppose I delete a enrtry from the table or mofying any entry in a table is there way to capture that update in SAP?

hi ,
follow these steps:
1. After you selecte the search help for New Responislbe person, domodify gets triggered.
2. In the wddomodify, get the value of New Responsible person by reading the attribute binded to it.
3. Now if Value entered is not initial, write a selecte query to fetch the name based on pernr no.
4. Finally bind the name fetched with the attribute binded to New Responsible person name.
Wdomodify :
************* *Read the New REsponsible person Pernr* ***********
DATA lo_nd_cn_sflight TYPE REF TO if_wd_context_node.
DATA lo_el_cn_sflight TYPE REF TO if_wd_context_element.
DATA ls_cn_sflight TYPE wd_this->element_cn_sflight.
DATA lv_carrid LIKE ls_cn_sflight-carrid.
* navigate from <CONTEXT> to <CN_SFLIGHT> via lead selection
lo_nd_cn_sflight = wd_context->get_child_node( name = wd_this->wdctx_cn_sflight ).
* get element via lead selection
lo_el_cn_sflight = lo_nd_cn_sflight->get_element( ).
* get single attribute
lo_el_cn_sflight->get_attribute(
    EXPORTING
      name = `PERNR`
    IMPORTING
      value = lv_carrid ).
****** *Check whethre a value has been entered in PERNR* *************
if lv_carrid is not initial.
*************Select Name based on pernr entered* ***********
select ename from pa001 into lv_ename where pernr = lv_carrid.
*******Set the Name atttribute with the ename value fetched* *****
lo_el_cn_sflight->set_attribute(
      name = `NAME`
      value = lv_cename ).
endif.

How can i get this variable value into second page IN BSP

Hi friends
I have variable wk_matnr value 'ABC' in first page of BSP.
How can i get this variable value into second page.
Moosa

Hi,
you can define variable (page attribiue) on the second page with the same name. You can realise the Navigation with Button ther started onInputProcesing routine. In onInputProcesing you have to call navigation->set_parameter with attribut name as parameter and then starting the navigation. If you have checked the auto property on the variable on second page and varable have same name, the value of variable should be transported.
[See this tutorial|http://help.sap.com/saphelp_erp2005/helpdata/DE/1a/c5133a62983c0ae10000000a114084/frameset.htm]
Best regards
Bogdan

How to get BW-BPS variable value into Visual Basic?

Hello,
Scenario:
Time characteristic 0FISCYEAR has a variable ZVFYEAR. In layout this time characteristic is defined as DATA COLUMN. When user changes VFYEAR variables value i want to get the value of variable into Visual Basic and to format header for table in the layout.
How to get BW-BPS variable value into Visual Basic?
Could you help me?
Thanks in advance.
Best Regards,
Arunas Stonys

Hi,
If i understand your requirments correctly ,you need to read the value of the Variable and Put it on the layout. Here is how i would solve this,
Read the value of the variable using an ABAP program.The logic for this would be to read the variable value and post it on the layout on a cell.You can do this by calling the ABAP program on opening the layout.this can be done using LB_EXIT_FM T-code. Now using the SAP delivered SAPAfterDataPut macro, read the cell in which you have placed the variable values and assign it to the necessary values you want to on the layout.All this will be done before the layout opens.
Hope this helps.
regards
Sai Vishnubhatla

How to capture the changes in ppoma_crm transaction

Hello All,
We have a requirement that if we add either a BP or an User to a positon in ppoma_crm transaction then we should be able to update these entries in our z table.
If it is a BP then we should look for the User mapped to it and update the z table else we should directly update the z tables with user name.
But we are facing an issue in capturing the values that have been updated.
Can anyone tell me how to capture the new values in the BADI for the ppoma_crm transaction ?
Regards
Sohit

Did any guys here face the requirement? If replicating all the columns some of which may change frequently but are not important to the other sites, then i wouldn't replicate these changes in order to improve the performance. Thanks for your help!

How to capture the data if i am using two Fiscal year variant

Hi
My client is required need two type financial statement one is as per company act and calender year. Other one is company act and fiscal year.
regarding we have maintain two fiscal year variant one is assigned to company code as per calender yr other one is assigned to Spl.Pr G/L. but how to capture the financial data from company code in case we are using two fiscal yr variant.
Rekha

Hi
U cannot maintain two two fiscal year varaint for a company code in GL. As said by u maintain one fiscal year varaint for GL and the other one for FI SL. When u post FI document in GL automatically the same will flow into FI SL for the corressponding period.
For example ur Fiscal year varant is April to March in GL
and Callendar year in FI SL and u do a posting in April 1 (period 1) in GL then it post it to 4th period in FI SL automatically since April is the 4th period in FI SL since it uses K4 as the fiscal year variant.

How to capture the screen and send it to attachment for that mail

hi sir ,
how to capture the screen shot and attach with that e-mail , whether it is possible or not ..
Regards,
kumar

hi sir,
i am asking about while creating the support message from help menu in sap..
while creating the support message we have to give component , priority and text also .. after that click the send icon in that support desk message .. while clicking the send button the entire screen ( what we have entered in that creen na ) i have to capture the screen ( it may be save in local file also ) after that it will attach into attachment and then send it to ...
Regards,
kumar

How to Capture the File Names of any extension using ssis

Hello,
Can you please let me know on how to Capture the File Names of any extension(EG : xls,text,.csv etc) at a time and stores in excel file using SSIS?
Any help would be appreciated.
Thanks,
Vinay s

If you need to act differently on each file type separately or if not all types of files are wanted, i.e. the Filespecifier cannot be *.* in the Foreach loop:
In the ssis package
make 3 variables:
to store the file extension, e.g. User::CurrentExtension of type string
to store the filename found in the directory: @CurrentFilename
to store the name of the directory where the files reside e.g. User::CurrentDirectory
make a foreach loop of type Foreach Item enumerator:
in the items list you add each file extension that you need
txt
csv
xls
xlsx
As Variable mappings map the CurrentExtension to Index 0
Inside this foreach loop add another foreach loop of type Foreach File enumerator, in the collection Expressions
add Expression Directory , set to @[User::CurrentDirecotry]
add Expression FileSpec, set to "*." + @[User::CurrentFileExtension]
In the Variable mappings, map Variable user::CurrentFilename to Index 0
Inside this loop use Execute SQL Task to insert the filename in a Excel connection.
Jan D'Hondt - SQL server BI development

How to Capture the Variables Value into the

Similar Messages

Maybe you are looking for