How can I sum record base on year in webi?

Dear Expert,
I would like to get some solution to solve my problem.
How should I design report as image below?
Best regards,
Chenna

Dear Ajay Gupta,
Thanks for your solution.
I have applied but it didn't solve.
Please see the image below
If you have any ideas please help me.
Best regards,
Chenna

Similar Messages

FAQ: I'm an Elements Plus member. How can I claim my complimentary one-year subscription to Revel?

Q: I’m an Elements Plus member. How can I claim my complimentary one-year subscription to Revel Premium?
A: We will create your Revel Premium account for you.
Simply go to Adoberevel.com to download the free Revel app to your iPhone, iPad, or Mac.
Sign in with your Adobe ID and password, and go to the Settings menu to see that your account has been credited with a one-year subscription.

Hello Vinyl_lives,
Vinyl records are certainly making a comeback these days, especially ones that are limited editions or releases. I know Phish’s record wasn’t any different, as it was quite a popular record. We did have a limited amount of the Nectar Deluxe Vinyl Edition, so I’m sure you were ecstatic to place a pre-order for it and reserve yourself a copy. I can imagine that your excitement soon turned into disappointment though when you found your order was automatically canceled after being on backorder for so long, and I’m sorry for any frustration you endured while trying to sort out your order.
While rare, we sometimes receive a higher than anticipated demand for an item than what we have inventory for. Should this happen, an item’s availability status should change from “available now” to “backorder”. These backordered purchases remain active for 14 days on most products, but if the item is still on backorder after that aforementioned time, we will automatically cancel the order on file. This is what happened with your Nectar Deluxe Vinyl Edition order, and I apologize for any confusion this may have caused. For further information on this, please view our Conditions of Use that may be found here.
I understand this process has left you without a copy of the vinyl you wish to own. While I cannot guarantee you a copy, you may place a new order for the record online. Please know that this item is still listed as backordered though, and any new order may be canceled once again depending if inventory becomes available or not.
Respectfully,
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

How can I sum the values in a given column on sheet 1 i.e. A1:A50 based on the adjacent columns specific value i.e. B1:B50 = "Living Room" on sheet 2

How can I sum the values in a given column on sheet 1 i.e. A1:A50 based on the adjacent columns specific value i.e. B1:B50 = “Dinning Room” on sheet 2
For Example:
SHEET 1
A
B
$50
Dinning Room
$800
Dinning Room
$300
Kitchen
$1,000
Master Bedroom
$100
Dinning Room
SHEET 2
Display the total SUM amount of each Project based on Sheet 1
Project Name
Total Cost
Dinning Room
$950
Kitchen
$300

Would be a good idea to open iWork Formulas and Functions User Guide and search for the description of the function named SUMIF
The Guide is available for every user thru the Help menu.
Yvan KOENIG (VALLAURIS, France) jeudi 19 mai 2011 17:32:42
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How can I sum numbers in a pdf? And, sum a partial list of numbers?

How can I sum a list (or partial list) of numbers in a pdf?

Thanks for your answer. I have Adobe Acrobat 7.0 Professional. If you
can help me further by listing the necessary steps that would be great.
Thanks.
Barry Baker

How can i delete Record when i click on Delete Link in a report

hi,
i have to create report
select S_NO,BILL_NO,LED_NAME,PUR_LED,VAT,BILL_DATE,ST_GRP_UND,GODOWN_NAME,
ITEM_NAME,UNIT,QTY,RATE,PER,DIS,AMOUNT,'Delete' from DUMY_AC_LED_PURASEI want to delete corressponding record when i click on Delete Link.
Here S_NO is P.k.
How can i delete Record when i click on Delete Link.

Manoj,
If something does not work then you should report back on the same thread so that there is continuity to the whole episode. Be as lucid as you can be so that people know whats the scenario. E.g. is not working is not enough. What happens? Does is show error , go blank, goes to another page... all that is important.
Its for posterity, down the line others will also visit the thread (may be).
Regards,

How can I sum up raws? the sum function seems to work for columns only and right now I have to create a separate formula for each raw

How can I sum up raws? the Sum function seems to work only on columns. Right now I have to create a separate formula for each raw

Hi dah,
"Thanks, but can I do one formula for all present and future raws? as raws are being added, I have to do the sum function again and again"
You do need a separate formula for each group of values to be summed.
If the values are in columns, you need a copy of the formula for each column.
If the values are in rows, you need a copy of the formula for for each row.
If you set up your formulas as SGIII did in his example (shown below), where every non-header row has the same formula, Numbers will automtically add the formula to new rows as you add them.
"Same formula" in this context means exactly the same as all the formulas above, with one exception: the row reference in each formula is incremented (by Numbers) to match the row containing the formula.
Here the formula looks like this in the three rows shown.
B2: =SUM(2)
B3: =SUM(3)
B4: =SUM(4)
That pattern will continue as rows are added to the table.
Also, because the row token (2) references all of the non-header cells in row 2, the formula will automatically include new columns as they are added to the table.
Regards,
Barry

How can i set the date time year to my i pod

how can i set the date time year to my i pod touch

Hello Theodora,
You can do this via your iPod's Settings application.
B-rock

How can I get record count with a query?

In Client/Server pplication,the client send a query to server.
How can server get record count by oracle call interface?
Is it need execute "select count(*) from ...."?

Yes.
Either that or increment a counter for each record fetched and
loop round until you hit the last record.
The first method would be more efficient on large datasets.

How can i fetch records from 3 tables in a single query without using join

Hi.
Can any body please tell me How can i fetch records from 3 tables with a single query without using joins
Thanx
prabhudutta

Hi Prabgudutta,
We can fetch the data by using the views concept.
Go throuth this info we can know the how to create view and same like database table only we can fetch the data.
Views conatin the data at runtime only.
Four different view types are supported. These differ in the
way in which the view is implemented and in the methods
permitted for accessing the view data.
Database views are implemented with an equivalent view on
the database.
Projection views are used to hide fields of a table (only
projection).
Help views can be used as selection method in search helps.
Maintenance views permit you to maintain the data
distributed
on several tables for one application object at one time.
step by step creation of Maintenance view:
With the help of the table maintenance generator, you are able to maintain the ENTRIES of the table in SM30 transaction.
It can be set in transaction SE11 - Tools - Table maintenance generator.
Table maintanance Generator is used to manually input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under attributes tab
2) utilities-table maintanance Generator-> create function group and assign it under
function group input box. Also assign authorization group default &NC& .
3) select standard recording routine radio in table table mainitainence generator to move table
contents to quality and production by assigning it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers this dialog box appears when you click on create button
6) save and activate table
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
SM30 is used for table maintenance(addition or deletion of records),
For all the tables in SE11 for which Table maintenance is selected , they can be maintained in SM30
Sm30 is used to maintain the table ,i.e to delete ,insert or modify the field values and all..
It creates the maintenance screen for u for the aprticular table as the maintenance is not allowed for the table..
In the SE11 delivery and maintenance tab, keep the maintenance allowed..
Then come to the SM30 and then enter the table name and press maintain..,
Give the authorization group if necessary and give the function group and then select maintenance type as one step and give the screen numbers as system specified..
Then create,,,
Then u will able to see the maintenance view for the table in which u can able to insert and delete the table values...
We use SM30 transaction for entering values into any DB table.
First we create a table in SE11 and create the table maintenance generator for that Table using (utilities-> table maintenance generator) and create it.
Then it will create a View.
After that from SM30, enter the table name and Maintain, create new entries, change the existing entries for that table.
Hope this resolves your query.
Reward all the helpful answers.
Rgds,
P.Naganjana Reddy

How can i sum the columns by condition?

ID Type QTY
1 A 20
2 A 20
3 B 20
I want to some QTY group by A but I also need the ID column to identify the order of row.
How can I sum QTY group by A and the result is sort by ID ?
Thanks you

Whats your expected output?
Is this the below?
Create Table test(id int,[Type] char(1), QTY int)
Insert into test Values(1,'A',20),
(2,'A',20),
(3,'B',20)
SElect *,SUM(qty)Over(partition by Type) From test Order by id
Drop table test

How can we sort records in alv, give example

how can we sort records in alv, give example

Hi
Setting Sort Conditions
It is possible to set sort conditions for the table data. This is achieved by filling an internal table of structure LVC_T_SORT which consists of the sort criteria. To have an initial sorting, pass it to the parameter IT_SORT of the method set_table_for_first_display.
FORM prepare_sort_table CHANGING pt_sort TYPE lvc_t_sort .
DATA ls_sort TYPE lvc_s_sort .
ls_sort-spos = '1' .
ls_sort-fieldname = 'CARRID' .
ls_sort-up = 'X' . "A to Z
ls_sort-down = space .
APPEND ls_sort TO pt_sort .
ls_sort-spos = '2' .
ls_sort-fieldname = 'SEATSOCC' .
ls_sort-up = space .
ls_sort-down = 'X' . "Z to A
APPEND ls_sort TO pt_sort .
ENDFORM. " prepare_sort_table
Preparing the table for sorting settings
We have two important points to tell about this topic. First one is that, be ready for a short dump if any one of the fields given to be sorted is not in the content of the field catalog. Secondly, when you make ALV Grid to sort data, by default it vertically merges fields having the same content. To avoid from this for all of the columns, you can set no_merging field of the layout structure to X. If you want to disable merging for just some columns, set no_merging field of the field catalog row corresponding to that column.
You can get and set sort criteria applied whenever you want by using methods get_sort_criteria and set_sort_criteria, respectively.

Sort Using FACTORY CLASSES
Sorts CL_SALV_SORTS
we can add some sorting to the ALV grid. Create the object reference variable and receive the object using the GET_SORTS method of the GR_TABLE object. Next, add the sort by calling the ADD_SORT method of the GR_SORTS object.
report zalvom_demo1.
data: ispfli type table of spfli.
data: gr_table type ref to cl_salv_table.
data: gr_functions type ref to cl_salv_functions.
data: gr_display type ref to cl_salv_display_settings. data: gr_columns type ref to cl_salv_columns_table.
data: gr_column type ref to cl_salv_column_table.
data: gr_sorts type ref to cl_salv_sorts.
data: color type lvc_s_colo.
start-of-selection.
select * into table ispfli from spfli. cl_salv_table=>factory( importing r_salv_table = gr_table changing t_table = ispfli ).
gr_functions = gr_table->get_functions( ). gr_functions->set_all( abap_true ).
gr_display = gr_table->get_display_settings( ). gr_display->set_striped_pattern( cl_salv_display_settings=>true ). gr_display->set_list_header( 'This is the heading' ). gr_columns = gr_table->get_columns( ).
gr_column ?= gr_columns->get_column( 'CITYTO' ). gr_column->set_long_text( 'This is long text' ). gr_column->set_medium_text( 'This is med text' ). gr_column->set_short_text( 'This is sh' ).
gr_column ?= gr_columns->get_column( 'CITYFROM' ). color-col = '6'.
color-int = '1'.
color-inv = '0'.
gr_column->set_color( color ).
gr_sorts = gr_table->get_sorts( ).
gr_sorts->add_sort 'CITYTO' ).
gr_table->display( ).
Regards
Ravish

Reward if useful to you
Message was edited by:
Ravish Garg

How can i populate records using LOV value in form 6i

Create a form based on the following output use EMP Table
Create a non Database Block i.e Control Block----> Dept No
Create a Database Block -EMP
Create an LOV for the Dept no from dept table.
For the Current Dept No . Populate the Employee Records
How can i populate records using LOV value????
thanks

How can i populate records using LOV value in form 6i Start by posting in the correct forum: {forum:id=82}
(Seriously: after making all your previous posts in the Forms forum, how do you end up posting in this one? Is it because the Forms forum has changed category?)

How can i populate records using LOV value

Create a form based on the following output use EMP Table
Create a non Database Block i.e Control Block----> Dept No
Create a Database Block -EMP
Create an LOV for the Dept no from dept table.
For the Current Dept No . Populate the Employee Records
How can i populate records using LOV value????
thanks

Hi maddyd2k
How can i populate records using LOV valueIt's not clear what u r trying to do create, create then want to...
1.Pls Create a non-db item db set to > no named DEPT_NAME
2. when creating the LOV assign the DEPT_NAME FROM DEPT table to that displayed item and u have also to assign the Dept No selected to the Dept No in the emp block
To populate or display DEPT_NAME after Query - the If i got ur problem then - u need to cretae a Post-Query Trigger then use the following...
BEGIN
SELECT DEPT_NAME
INTO :CONTROL_BLOCK.DEPT_NAME
FROM DEPT
WHERE Dept No = :Dept No;
EXCEPTION
WHEN NO_DATA_FOUND THEN NULL;
WHEN OTHERS THEN (ERRTXT);
END;Hope this helps...
Regards,
Abdetu...

How can I know records is committed or un-committed

Hi Guys
Insert one record into DB without issue commit immediately, At same session,Another segment program,Using SQL or PL/SQL, How can I know records is committed or un-committed
Thanks
Pan
Edited by: Pan.Tian on May 31, 2012 8:45 PM

A session can never see another session's uncommitted rows. Oracle provides read consistency. This basically means that when your session starts to read data, at time1, Oracle provides you with "the truth" (committed rows) as it exists, at time1. Let's call this version 20 of the data.
Another session can change data. Commit. It can create new versions of the data. However, this does not impact what your session reads. It sees the rows as they were at time1 when your session started to read them. Your session reads version 20, irrespective if whether version 25 is currently the latest version of the data.
So there are no dirty reads in Oracle - and no way for your session to see the dirty and uncommitted data of another session. Or vice versa.
Of course, if you make changes in your session, then your session will see those uncommitted changes.
Read up on Multi-Version Concurrency Control (MVCC) and Multiversion Read Consistency (Oracle® Database Concepts guide).

How can I sum all the amount per line?

HI,
How can I sum all the amount per line?
EXAMPLE:
[code]
 TOTAL:
1,000 2,000 5,200 $8,200
400 1,200 6,000 7,600
[/code]
THANKS!!

If you are sure of the number of columns that you are gonna get then you can add them to a variable and display.
total = itab-col1 + itab-col2 + itab-col3.
If you dunno how many columns will come , you have to use field symbols.
Say the datatabse table has 16 columns which will contain your price and you have to calculate the sum of all those , then assign them to field symbols and calculate.
Have a look at the following code.
FORM GET_VALUES_FROM_COSS .
FIELD-SYMBOLS: <FS1> TYPE ANY.
DATA: V_COMPONENT1 TYPE I.
V_COMPONENT1=31. " your field of table from which amount field starts
Cumulate the posting values of all the 16 period buckets as to get
total production order cost. This is to handle the partial posting of
production order values in different periods.
DO 16 TIMES.
 ADD 1 TO: V_COMPONENT1.
 ASSIGN COMPONENT V_COMPONENT1 OF STRUCTURE COSS TO <FS1>.
 IF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR1.
 ADD <FS1> TO I_FINAL-PL_LABCOST.
 ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR1.
 ADD <FS1> TO I_FINAL-ACT_LABCOST.
 ELSEIF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR2.
 ADD <FS1> TO I_FINAL-PL_MATCOST.
 ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR2.
 ADD <FS1> TO I_FINAL-ACT_MATCOST.
 ELSEIF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR3.
 ADD <FS1> TO I_FINAL-PL_OPCOST.
 ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR3.
 ADD <FS1> TO I_FINAL-ACT_OPCOST.
 ELSEIF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR4.
 ADD <FS1> TO I_FINAL-PL_FACCOST.
 ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR4.
 ADD <FS1> TO I_FINAL-ACT_FACCOST.
 ELSEIF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR5.
 ADD <FS1> TO I_FINAL-PL_LABCOST.
 ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR5.
 ADD <FS1> TO I_FINAL-ACT_LABCOST.
 ELSEIF COSS-WRTTP EQ '05'.
 ADD <FS1> TO I_FINAL-OTHER_PL_COST.
 ELSEIF COSS-WRTTP EQ '04'.
 ADD <FS1> TO I_FINAL-OTHER_ACT_COST.
 ENDIF.
ENDDO.
ENDFORM. " GET_VALUES_FROM_COSS
Let us know if u need more inputs

How can I sum record base on year in webi?

Similar Messages

Maybe you are looking for