How can I use object type in Jdeveloper 11g?

Dear friends
I made some object types(Database layer) and each one refer to functions or procedures to generate table or view, for instance in one of my project I could make a View Object with this function and generate a table:
Select * from table (genarate_emp(2019))
In this sample I used a static value (2019) and I did it perfectly, but I want to make a table with dynamic value for instance I would like to set partial trigger of this view object and get dynamic value from the other view object.
Please help me if you have any suggestions.
Best regards,
Babak Saraie

Hi Babak
It's a common requirement on posting to this forum that you describe which version of JDeveloper you're using and what technologies (obviously ADF BC in this case).
For making the static value dynamic within your View Object, are you familiar with the View Object bind variables/bind parameters? This will allow you to define a named variable in your VO that you can set programmatically or even let the user set. Play around with those first and see if they solve one part of your problem, then come back to the forum for the second part.
Regards,
CM.

Similar Messages

How can I use Object's methed by OO4O

I have done a type as following
create or replace type classteacher as object
tchid number,
tchname varchar2(30),
tchhomepage varchar2(100),
tchsex varchar2(4),
member procedure getCourseList(crslist out sys_refcursor)
and the method is define as following
create or replace type body CLASSTEACHER is
member procedure getCourseList(crslist out sys_refcursor)
is
begin
open crslist for
select a.crs_id,a.crs_name,a.crs_notice
from tb_courselist a,tb_teacher b
where trim(a.tech_name) = trim(b.name)
and b.teacher_id = tchid;
end;
how can I use the method by OO40 in vb.net.

What is that post supposed to be?

How do I use Object Type

Hi,
I have the following object type
create or type address_type as object
(street varchar2(10), no varchar2(10));
and table: create table test(id integer, address address_type)
How can I insert values in my table test using apex?
Thank you

Hi,
Both the above suggestions do not work
I have say an ITAB of type SPFLI.
How do I convert this data into xstring type?
Also does my ITAB have to be a specific type for me to get this to work?
Cheers
Kiran

How can I use jad decompiler with Jdeveloper ?

I want to use jad decompiler with JDeveloper .
What should I do ?
I also want jdeveloper can set break point in source code that decompiled for debugging .
If Jdeveloper dose n't have Jad Extension .
Do you have any other decompiler that can be integrated with JDeveloper ?
thanks in advance

In JDeveloper 10.1.2, I put the following line in jdev.conf:
AddVMOption -Djcncmd=c:/progra~1/decomp/jad.exe -b -ff -nl -p -pi99999 -space -t2 -lnc -noinner
Use at your own risk, though. It works nicely 9 times out of 10, but for some classes it seems to 'freeze' JDeveloper and you have to kill the jdev.exe process. I'm sure it has something to do with the command line options to jad.exe, but I've not been able to identify the problem.
If debugging is your goal, if I'm not mistaken JAD is not able to recreate source files where every statement is on the same line number as in the original file, so step-by-step debugging is a no-no. If you know of any way to use JAD so that is does put each statement on the correct line, I'll be interested!
Peter

How can I use authentication type in sending/receiving a message

Dear all,
I am building a mail client program. I have a problem: I don't know use javamail to authenticate to mail server in while send/receive messages. I know some authentication types as PLAIN, LOGIN, CRAM-MD5, DIGIT-MD5, NTLM and GSSAPI. and I tried use "mail.imap.sasl.mechanisms" property, but it do not work. Any suggestion is helpful for me. Thanks!

Thank for quick your reply,
I checked with Imap protocol to receive message. The mail server supported authentication type: Plain and Login. Below is code:
      Properties props = System.getProperties();
      String socketFactoryClass = "javax.net.SocketFactory";
      String host = account.getIncomingHost();
      int port = Integer.valueOf(account.getIncomingPort());
      String fallback = "mail.imap.socketFactory.fallback";
      String imapSocketFactoryClass = "mail.imap.socketFactory.class";
      String emailAddress = account.getIncomingUser();
      props.put("mail.mime.base64.ignoreerrors", "true");
      if (account.isIncomingSsl()) {
        MailSSLSocketFactory socketFactory = this.getSSLSocketFactory(host);
        if (account.getSecureAuthsIncoming().equalsIgnoreCase("starttls"))
          props.put("mail.imap.starttls.enable", true);
        else
          props.put("mail.imap.ssl.enable", "true");
        props.put("mail.imap.ssl.socketFactory", socketFactory);
        props.put("mail.imap.sasl.mechanisms", account.getAuthMechsIncoming());
      props.put(fallback, "false");
      props.put(imapSocketFactoryClass, socketFactoryClass);
      Session session = Session.getInstance(props, null);
      String protocolName = "imap";
      if (Utils.isGmailAccount(emailAddress))
        protocolName = imaps;
      IMAPStore imapStore = (IMAPStore) session.getStore(protocolName);
      try {
        imapStore.connect(host, port, emailAddress, account.getIncomingPassword());
      } catch (Exception e) {.....}account.getAuthMechsIncoming() return authentication types, this instance is Login or Plain(as I tested). By the way, I have a problem how to check authentication types supported by server(as Evolution Mail on Ubuntu has)?. sorry for my English. Thank for your consider time.

How can I use jbo:InputSelect for a char type filed?

How can I use <jbo:InputSelect for a char type filed?
I have two tables. One is room (primary key is room(type is char)), another table is responsibility (foreign ker is room(type is char)). Both tables have same length for room column.
There is a problem:
If I use (in the "DataEditComponent.jsp" file)
<jbo:InputSelect multiple="false" datasource="dsEdit" displaydatasource="roomData" displaydataitem="ROOM" displayvaluedataitem="ROOM" ></jbo:InputSelect>
to get the room input for responsibility from combobox(Datasource roomData is from room table). In the form the room field cannot bind the data in combobox, alway select the first item. And if I select one item and click the update button.There is an error message:
Error Message: JBO-27010: Attribute set with value H409 for Room in Responsibility has invalid precision/scale
I found If I changed the field type from char to varchar2 in database also change the entity objects, it works well. I wonder if there are any diffrence using <jbo:InputSelect tag in char and varchar2 type. How can I use <jbo:InputSelect for a char type filed as i don't want to change my datatype in database at this stage.
I try this in JDeveloper 9.03, 9.034, 9.04. The result is the same.

If I were in your shoes, here's how I would do it:
<%-- Assuming you have dsRoom and dsResponsibility --%>
<%-- Select is an HTML tag --%>
<select name="ROOM" size="1">
<% char roomID =""; // Init your character var
// Open a rowsetIterator to get the records and add them to the LOV
<jbo:RowsetIterate datasource="dsResponsibility" changecurrentrow="true" >
<% roomID = (char)dsResponsibility.getRowSet().getCurrentRow().getAttribute("ROOM"); // Grab the char value
// add the value to the LOV
%>
<option value="<%=roomID%>"><%=roomID%></option>
</jbo:RowsetIterate>
</select>
If you are using this as part of an edit page you may want to utilize the "selected" option of the <option> tag. In one instance I am doing this on an edit page because the use may open an existing record. If I don't account for it, then it will change the DB to contain the first value from the list! You can do a simple check like:
//Set the current record's char
char curRecord = (char)rowEdit.getAttribute("ROOM");
// inside the iterate:
if (curRecord == roomID) {
<option value="<%=roomID%>" selected><%=roomID%></option>
} else {
<option value="<%=roomID%>" ><%=roomID%></option>
Hope that helps!

How can I use a progress bar in objective c mac

How can I use a progress bar in objective c mac? I have a code that downloads a file and I want to be able to let the progress bar increase by 1. A bit further on the code (to download the file) it needs to increase again. And so on...
My code
-(IBAction) downloadButtonPressed:(id)sender;{
    //get the path to the image that we're going to download
    NSURL *url = [NSURL URLWithString:@"https://www.dropbox.com/s/l6o07m48npxknt4/Cluedo.zip?dl=1"];
    //get the path to documents folder where we're going to save our image
    NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
    NSString *DocumentsDirectory = [paths objectAtIndex:0];
    NSString *filePath = [DocumentsDirectory stringByAppendingPathComponent:@"Cluedo.zip"];
    //Download the file to memory
    NSData *data = [NSData dataWithContentsOfURL:url];
    NSError *error = nil;
    //Save it on the Documents directory
    [data writeToFile:filePath options:NSDataWritingAtomic error:&error];
    NSFileManager* fm = [NSFileManager defaultManager];
    NSString* zipPath = filePath;
    NSString* targetFolder = @"/Applications"; //this it the parent folder
    //where your zip's content
    //goes to (must exist)
    //create a new empty folder (unzipping will fail if any
    //of the payload files already exist at the target location)
    [fm createDirectoryAtPath:targetFolder withIntermediateDirectories:NO
                   attributes:nil error:NULL];
    //now create a unzip-task
    NSArray *arguments = [NSArray arrayWithObject:zipPath];
    NSTask *unzipTask = [[NSTask alloc] init];
    [unzipTask setLaunchPath:@"/usr/bin/unzip"];
    [unzipTask setCurrentDirectoryPath:targetFolder];
    [unzipTask setArguments:arguments];
    [unzipTask launch];
    //[unzipTask waitUntilExit]; //remove this to start the task concurrently

Your code really isn't suitable for a progress bar, not a real one anyway. Your code will spend about 99.9% of its time in the method "dataWithContentsOfURL:url". That is not a method you want to use in the real world. It is only for demos or proof of concept exercises. All network operations should be asynchronous. That gives you the ability to gracefully recover when there is a failure and also to do fancy things like display a progress bar and tell the user when the download is complete.
Once you get the asynchronous download logic working, then you can worry about the progress bar. The first thing you will need is the size of the file. Without that, all you can ever do is an indeterminate progress bar or spinner. If you have the size of the file, then you can keep track of how much of the file you have downloaded and update your progress bar with the percentage complete. Make sure to throttle it to no more than incrementing by 1% at a time. Otherwise, a large file or a file transferred in many small chunks, would waste too much time updating the progress bar for no change.

How can I use XStream to persist complicated Java Object to XML & backward

Dear Sir:
I met a problem as demo in my code below when i use XTream to persist my Java Object;
How can I use XStream to persist complicated Java Object to XML & backward??
See
[1] main code
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.FileReader;
import java.io.FileWriter;
import java.io.IOException;
import java.util.ArrayList;
import com.thoughtworks.xstream.XStream;
import com.thoughtworks.xstream.io.xml.DomDriver;
public class PhoneList {
     ArrayList<PhoneNumber> phones;
     ArrayList<Person> person;
     private PhoneList myphonelist ;
     private LocationTest location;
     private PhoneList(String name) {
     phones = new ArrayList<PhoneNumber>();
     person = new ArrayList<Person>();
     public ArrayList<PhoneNumber> getphones() {
          return phones;
     public ArrayList<Person> getperson() {
          return person;
     public void addPhoneNumber(PhoneNumber b1) {
          this.phones.add(b1);
     public void removePhoneNumber(PhoneNumber b1) {
          this.phones.remove(b1);
     public void addPerson(Person p1) {
          this.person.add(p1);
     public void removePerson(Person p1) {
          this.person.remove(p1);
     public void BuildList(){
          location = new LocationTest();
          XStream xstream = new XStream();
          myphonelist = new PhoneList("PhoneList");
          Person joe = new Person("Joe, Wallace");
          joe.setPhone(new PhoneNumber(123, "1234-456"));
          joe.setFax(new PhoneNumber(123, "9999-999"));
          Person geo= new Person("George Nixson");
          geo.setPhone(new PhoneNumber(925, "228-9999"));
          geo.getPhone().setLocationTest(location);
          myphonelist.addPerson(joe);
          myphonelist.addPerson(geo);
     public PhoneList(){
          XStream xstream = new XStream();
          BuildList();
          saveStringToFile("C:\\temp\\test\\PhoneList.xml",convertToXML(myphonelist));
     public void saveStringToFile(String fileName, String saveString) {
          BufferedWriter bw = null;
          try {
               bw = new BufferedWriter(
                         new FileWriter(fileName));
               try {
                    bw.write(saveString);
               finally {
                    bw.close();
          catch (IOException ex) {
               ex.printStackTrace();
          //return saved;
     public String getStringFromFile(String fileName) {
          BufferedReader br = null;
          StringBuilder sb = new StringBuilder();
          try {
               br = new BufferedReader(
                         new FileReader(fileName));
               try {
                    String s;
                    while ((s = br.readLine()) != null) {
                         // add linefeed (\n) back since stripped by readline()
                         sb.append(s + "\n");
               finally {
                    br.close();
          catch (Exception ex) {
               ex.printStackTrace();
          return sb.toString();
     public String convertToXML(PhoneList phonelist) {
          XStream xstream = new XStream(new DomDriver());
          xstream.setMode(xstream.ID_REFERENCES) ;
          return xstream.toXML(phonelist);
     public static void main(String[] args) {
          new PhoneList();
}[2].
import java.io.Serializable;
import javax.swing.JFrame;
public class PhoneNumber implements Serializable{
       private      String      phone;
       private      String      fax;
       private      int      code;
       private      String      number;
       private      String      address;
       private      String      school;
       private      LocationTest      location;
       public PhoneNumber(int i, String str) {
            setCode(i);
            setNumber(str);
            address = "4256, Washington DC, USA";
            school = "Washington State University";
     public Object getPerson() {
          return null;
     public void setPhone(String phone) {
          this.phone = phone;
     public String getPhone() {
          return phone;
     public void setFax(String fax) {
          this.fax = fax;
     public String getFax() {
          return fax;
     public void setCode(int code) {
          this.code = code;
     public int getCode() {
          return code;
     public void setNumber(String number) {
          this.number = number;
     public String getNumber() {
          return number;
     public void setLocationTest(LocationTest bd) {
          this.location = bd;
        JFrame f = new JFrame();
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(location);
        f.getContentPane().add(location.getControls(), "Last");
        f.setSize(400,400);
        f.setLocation(200,200);
        f.setVisible(true);
     public LocationTest getLocationTest() {
          return location;
     }[3].
package test.temp;
import java.io.Serializable;
public class Person implements Serializable{
     private String           fullname;
       @SuppressWarnings("unused")
     private PhoneNumber      phone;
       @SuppressWarnings("unused")
     private PhoneNumber      fax;
     public Person(){
     public Person(String fname){
            fullname=fname;
     public void setPhone(PhoneNumber phoneNumber) {
          phone = phoneNumber;
     public void setFax(PhoneNumber phoneNumber) {
          fax = phoneNumber;
     public PhoneNumber getPhone() {
          return phone ;
     public PhoneNumber getFax() {
          return fax;
    public String getName() {
        return fullname ;
    public void setName(String name) {
        this.fullname      = name;
    public String toString() {
        return getName();
}[4]. LocationTest.java
package test.temp;
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import javax.swing.*;
import javax.swing.event.*;
public class LocationTest extends JPanel implements ChangeListener
    Ellipse2D.Double ball;
    Line2D.Double    line;
    JSlider          translate;
    double           lastTheta = 0;
    public void stateChanged(ChangeEvent e)
        JSlider slider = (JSlider)e.getSource();
        String name = slider.getName();
        int value = slider.getValue();
        if(name.equals("rotation"))
            tilt(Math.toRadians(value));
        else if(name.equals("translate"))
            moveBall(value);
        repaint();
    protected void paintComponent(Graphics g)
        super.paintComponent(g);
        Graphics2D g2 = (Graphics2D)g;
        g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                            RenderingHints.VALUE_ANTIALIAS_ON);
        if(ball == null)
            initGeom();
        g2.setPaint(Color.green.darker());
        g2.draw(line);
        g2.setPaint(Color.red);
        g2.fill(ball);
    private void initGeom()
        int w = getWidth();
        int h = getHeight();
        int DIA = 30;
        int padFromEnd = 5;
        line = new Line2D.Double(w/4, h*15/16, w*3/4, h*15/16);
        double x = line.x2 - padFromEnd - DIA;
        double y = line.y2 - DIA;
        ball = new Ellipse2D.Double(x, y, DIA, DIA);
        // update translate slider values
        int max = (int)line.getP1().distance(line.getP2());
        translate.setMaximum(max);
        translate.setValue(max-padFromEnd);
    private void tilt(double theta)
        // rotate line from left end
        Point2D pivot = line.getP1();
        double lineLength = pivot.distance(line.getP2());
        Point2D.Double p2 = new Point2D.Double();
        p2.x = pivot.getX() + lineLength*Math.cos(theta);
        p2.y = pivot.getY() + lineLength*Math.sin(theta);
        line.setLine(pivot, p2);
        // find angle from pivot to ball center relative to line
        // ie, ball center -> pivot -> line end
        double cx = ball.getCenterX();
        double cy = ball.getCenterY();
        double pivotToCenter = pivot.distance(cx, cy);
        // angle of ball to horizon
        double dy = cy - pivot.getY();
        double dx = cx - pivot.getX();
        // relative angle phi = ball_to_horizon - last line_to_horizon
        double phi = Math.atan2(dy, dx) - lastTheta;
        // rotate ball from pivot
        double x = pivot.getX() + pivotToCenter*Math.cos(theta+phi);
        double y = pivot.getY() + pivotToCenter*Math.sin(theta+phi);
        ball.setFrameFromCenter(x, y, x+ball.width/2, y+ball.height/2);
        lastTheta = theta; // save theta for next time
    private void moveBall(int distance)
        Point2D pivot = line.getP1();
        // ball touches line at distance from pivot
        double contactX = pivot.getX() + distance*Math.cos(lastTheta);
        double contactY = pivot.getY() + distance*Math.sin(lastTheta);
        // find new center location of ball
        // angle lambda = lastTheta - 90 degrees (anti-clockwise)
        double lambda = lastTheta - Math.PI/2;
        double x = contactX + (ball.width/2)*Math.cos(lambda);
        double y = contactY + (ball.height/2)*Math.sin(lambda);
        ball.setFrameFromCenter(x, y, x+ball.width/2, y+ball.height/2);
    JPanel getControls()
        JSlider rotate = getSlider("rotation angle", "rotation", -90, 0, 0, 5, 15);
        translate = getSlider("distance from end", "translate", 0, 100, 100,25, 50);
        JPanel panel = new JPanel(new GridLayout(0,1));
        panel.add(rotate);
        panel.add(translate);
        return panel;
    private JSlider getSlider(String title, String name, int min, int max,
                              int value, int minorSpace, int majorSpace)
        JSlider slider = new JSlider(JSlider.HORIZONTAL, min, max, value);
        slider.setBorder(BorderFactory.createTitledBorder(title));
        slider.setName(name);
        slider.setPaintTicks(true);
        slider.setMinorTickSpacing(minorSpace);
        slider.setMajorTickSpacing(majorSpace);
        slider.setPaintLabels(true);
        slider.addChangeListener(this);
        return slider;
}OK, My questions are:
[1]. what I generated XML by XSTream is very complicated, especially for object LocationTest, Can we make it as simple as others such as Person object??
[2]. after I run it, LocationTest will popup and a red ball in a panel will dsiplay, after I change red ball's position, I hope to persist it to xml, then when I read it back, I hope to get same picture, ie, red ball stiil in old position, How to do that??
Thanks a lot!!

Positive feedback? Then please take this in a positive way: if you want to work on persisting Java objects into XML, then GUI programming is irrelevant to that goal. The 1,000 lines of code you posted there appeared to me to have a whole lot of GUI code in it. You should produce a smaller (much smaller) example of what you want to do. Calling the working code from your GUI program should come later.

How can i produce this type of line chart (yield curve) by using flex2 charting?

help! I am a flex newcomer, how can i produce this type of
line chart (yield curve) by using flex2 charting? Anybody can teach
me how can i customize the width of each scales as below of line
chart? anybody know this?
Click
Here To See

I need to show the X and Y Co-ordinate in a message when I click on the graphic's point.
thanks for the tips, I´ll try to understand the sample program.
Noguti

How can we use business object (e.g. crystal report ) in webdynpro abap

Hi All,
We all know that business object has been part of sap products.
But even though in SAP, I really don't know much about business object.
and how can we use the great function of BO and integrate into our development to make
user have much better function and user experience.
Do we have some learning material of BO?
Could someone share some material here?
Thanks and Regards
Aaron.

One of the main ways that you can integrate some Business Objects content with WDA is via FlashIslands. If you are on 7.01 or higher, you have the option to use FlashIslands UI element. There are many tutorials on FlashIslands available on SDN. FlashIslands work well with Xcelsius content, since the output of Xcelsius is a Flex component. It is pretty easy to set the Xcelsius interface to External Connection and then write a wrapper Flex Component around the generated output, so that it can be used in the FlashIslands interface.
For Crystal Reports integration you will need NetWeaver 7.02 (comming early next year). We have integrated Crystal Reports as an output option in the Web Dynpro ABAP ALV and the Classic Dynpro ALV. You don't need to do any development to enable this. You can use two different SAP delivered Crystal Reports templates for the ALV output, or create and add your own templates.
Some of ther BOBJ integration is still in prototype and demo phase within SAP. For instance we have a data interface to send data to Explorer onDemand from any ABAP application. We have a prototype FlashIsland for WebI to run in place within Web Dynpro ABAP. Over future enhancement packages you will see increased integration opportunties with the BOBJ capabilites.

How can i use Catalog in Method Type?

Dear Experts,
How can i use Catalog in Method Type?
I want to use Multiple method type mean require selection option(help from catalog)and also need to entere the result against certain parameters. So how can i do this possible ?
Except use of additional infrmation field
Regards,
Abhishek

Hi,
Can i provide selection option F4 help at Method while enteing the result?
Because for 1 MIC as per buyer method testing different so it will come alternately.
i.e i have 3 methods which comes altarnative for one MIC
TST_ISO
TST_AATC
TST_ASTM
So how it is possible???

How can I use srvctl command line for change "Failover type" and "F method"

Hi all,
I am using Oracle One Node (11.2.0.3), and I have a service:
/u01/11.2.0/grid/bin/srvctl config service -d orcl
Service name: orcldb
Service is enabled
Server pool: orcl
Cardinality: 1
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: orcl_1
Available instances:
I would like to change "Failover type" and "Failover method" to:
Failover type: SELECT
Failover method: BASIC
How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
Thanks in advance.
Leonardo.

user10674190 wrote:
Hi all,
I am using Oracle One Node (11.2.0.3), and I have a service:
/u01/11.2.0/grid/bin/srvctl config service -d orcl
Service name: orcldb
Service is enabled
Server pool: orcl
Cardinality: 1
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: orcl_1
Available instances:
I would like to change "Failover type" and "Failover method" to:
Failover type: SELECT
Failover method: BASIC
How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
Thanks in advance.
Leonardo.srvctl modify service -d database_name -s orcldb -q TRUE -m BASIC -P BASIC -e SELECT -z 180 -w 5 -j LONG
Also see
11gR2(11.2) RAC TAF Configuration for Admin and Policy Managed Databases [ID 1312749.1]

I just installed Adobe InDesign CC 2014 and now I can't scale objects/type using Command+Shift Key. Has anyone else had this problem and if so, any solution?

I just installed Adobe InDesign CC 2014 and now I can't scale objects/type using Command+Shift Key. Has anyone else had this problem and if so, any solution?

There is a conflict with third party software or your system keyboard shortcuts. Lately, there have been many postings about conflicts with Chrome extensions so check there first.
It's not a new problem. I wrote about it on InDesignSecrets.com in 2006:
The Missing Keystrokes Mystery | InDesignSecrets

How can i return object from oracle in my java code using pl/sql procedure?

How can i return object from oracle in my java code using pl/sql procedure?
And How can i returned varios rows fron a pl/sql store procedure
please send me a example....
Thank you
null

yes, i do
But i can't run this examples...
my problem is that i want recive a object from a PL/SQL
//procedure callObject(miObj out MyObject)
in my java code
public static EmployeeObj callObject(Connection lv_con,
String pv_idEmp)
EmployeeObj ret = new EmployeeObj();
try
CallableStatement cstmt =
lv_con.prepareCall("{call admin.callObject(?)}");
cstmt.registerOutParameter(1, OracleTypes.STRUCT); // line ocurr wrong
//registerOutParameter(int parameterIndex, int sqlType,String sql_name)
cstmt.execute();
ret = (EmployeeObj) cstmt.getObject(1);
}//try
catch (SQLException ex)
System.out.println("error SQL");
System.out.println ("\n*** SQLException caught ***\n");
while (ex != null)
System.out.println ("SQLState: " + ex.getSQLState ());
System.out.println ("Message: " + ex.getMessage ());
System.out.println ("Vendor: " + ex.getErrorCode ());
ex = ex.getNextException ();
System.out.println ("");
catch (java.lang.Exception ex)
System.out.println("error Lenguaje");
return ret;
Do you have any idea?

How can I use regular expression to open files of certain types in java?

Ok this is the problem I am facing:
I have a command line input of something like "/usr/foo/bar/*.html"
and there are multiple files in that folder that end with .html.
How can I use the input to go through/open all the .html files in Java?
Help would be greatly appreciated thanks!

Or if you have to do it in java, check out the interfaces java.io.FileFilter and java.io.FileNameFilter
http://home.tiscali.nl/~bmc88/java/sbook/0128.html
class HTMLFilter implements FilenameFilter {
public boolean accept(File dir, String name) {
return (name.endsWith(".html"));
}Cheers,
evnafets

How can I use object type in Jdeveloper 11g?

Similar Messages

Maybe you are looking for