How can L identify what are the not null fields of a table in a stored procedure ?
How can L identify what are the not null fields of a table in a stored procedure ?
You could query the data dictionary:
SELECT column_name
FROM all_tab_columns
WHERE owner = '...'
AND table_name = '...'
AND nullable = 'N'
Similar Messages
-
How can we identify what are all user exits are there for sales orders,deli
Dear All,
How can we identify what are all user exits are there for sales orders,deliverys and invoices
thanks
nitchel vHi Nitchel
There are many ways to find out the user exits..
For example for VA01.
Goto Transaction ie VA01:
goto System-- Status
doubleclick on the program name ie SAPMV45A
SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
get the package name from here ie VA
note the package(VA) and get back to main screen
goto SMOD tcode and click on find button in the package spec giv the package name ie VA and execute it
you will find list of exits available
check out the exit that suits ur requirement
goto cmod and create a new project and implement in that user exit.
You will get the following exits in SMOD..
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For Delivery you will get .. here the package name will be VL.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
For Billing VF01..Package is VF..
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Or another way is ..
- Get the program name for that T-Code
- Go to that program
- In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
And also you can check in the tables in SE16 for user exits..
MODSAP - Stores SAP Enhancements
MODSAPT - Stores SAP Enhancements - Short Texts
MODACT - Stores Modifications
And there are other ways as well , pls check the forum for this ,
Regards,
Vvieks
Note : If you have any specific requirement then pls let us know , we will guide you -
I have very little space left on the hard drive on my macbook, on my storage report it says "other" is taking up more than two thirds of the space on the hardrive. How can I identify what these files are?
Hello,
There is free software you can download that gives you a graphical image of what files are used on your hard drive. http://www.derlien.com/
This may help you clean down your hard drive for more space.
Best of luck -
What are the notes of the Smart Guitar?
When I open iOS GarageBand's Smart Guitar on Key C-Major, what are the notes I'm seeing? For instance, what are the notes when I tap the C chord string from 1 (bottom) to 6 (up)?
My actual goal is to record all string tap sounds, cut them into respective pieces in Audacity, then save them as e.g. "C.wav", for further use in another context. I like how GarageBand lays out the chords so my small (noncommercial) program aims to copy this, albeit I'm not a professional musician (as you can see from my question, I'm sure!).
Thanks!1. Keeping track of the individual conversations taking place between applications on the source and destinations on the source and destination hosts. 2. Segmenting data and adding a header to identify and manage each segment. 3. Using the header information to reassemble the segments into applications data. 4. Passing the assembled data to the correct applications.
-
the old version of itunes had a drop down box listing songs that did not sync newer version does not how can i see what songs did not sync, The box message on the screen says 19 items did not sync to your ipad, see itunes for more information. Where do I look??
Hello Tonchee
If you are seeing an Apple ID that is not yours, then you have purchased content on your iPad that is tied to that Apple ID. You would need to know that password or remove the content that is associated with that Apple ID.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
my phone is unable to power on and i dont have the packaging how can i check what is the serial number of the phone
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
Cheers, Tom -
Who can tell me what are the functions of the following subdirectories?
Who can tell me what are the functions of the following subdirectories? How are they classified?
oracle@hostp ~$ cd $ORACLE_HOME
oracle@hostp db_1$ ls
{color:#0000ff}
assistants demo jdbc network oui slax
bin diagnostics jdk nls owm sqlj
cdata has jlib oc4j perl sqlnet.log
cfgtoollogs hostp_db10g jre odbc plsql sqlplus
clone hostp_rcatalog ldap olap precomp srvm
config hs lib OPatch racg sysman
crs install log opmn rdbms uix
css {color:#000000}install.platform{color} md oracore relnotes wwg
ctx inventory mesg oraInst.loc {color:#ff6600}root.sh{color} xdk
dbs javavm mgw {color:#ff6600}ord root.sh.old{color}
{color}
dbs javavm mgw ord root.sh.oldHi,
Here we go:
- assistants: configuration Assistants
- bin: binaries for all products
- ctx: interMedia Text cartridge
- dbs : contain initsid.ora, lksid (initiation files, password files,etc)
- instal:l install related files
- lib: Oracle product libraries
- jlib: Java classes
- md: Spatial cartridge
- mlx Xerox: Stemmer (for interMedia Text cartridge)
- network: Net8
- nlsrtl : NLS run-time loadable data
- ocommon: common files for all products
- odg: data gatherer
- opsm: Parallel Server Manager Components
- oracore: core libraries
- ord: data cartridges
- otrace: Oracle TRACE
- OPatch: Patches to the DB
- plsql : PL/SQL
- precomp: precompilers
- rdbms : server files and libraries required for the database
- slax: SLAX parser
- sqlplus : SQL*Plus
For more Information you can refer to:
- http://www.stanford.edu/dept/itss/docs/oracle/10g/em.101/b12140/3_oui_oracle_homes.htm
- http://www.dba-oracle.com/linux/important_files_directories.htm
Cheers,
Francisco Munoz Alvarez
http://www.oraclenz.com -
Can i know what are the thumb rules of sap r/3
hi,
sap gurus,
good afternoon to all,
can i know what are the list of thumb rules of sap r/3.
plz
regards,
balaji.t
09990019711Hi,
Please Follow link
http://www.dbis.ethz.ch/research/publications/19.pdf
Thanks,
Raja -
What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601
Hi,
I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
Dr. Kirco Arsov
Solved!
Go to Solution.Hi Kirco,
I have some more information for you :-)
I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
TB_0_LevelEdgeReg :: Offset 0x660
TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
7..6: EdgeMode
5..0: LESel
LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
TG_0_CombinationReg :: Offset 0x6A0
TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
19..16: CombFunction
5..4: CombTypeB
1..0: CombTypeA
CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
All of the other bits should be set to 0b0.
Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008) -
What are the advantages of using an internal table with workarea
Hi,
can anyone tell me
What are the advantages of using an internal table with workarea
over an internal table with header line?
thnks in adv
regards
nagiHI,
Internal tables are a standard data type object which exists only during the runtime of the program. They are used to perform table calculations on subsets of database tables and for re-organising the contents of database tables according to users need.
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/content.htm
<b>Difference between Work Area and Header Line</b>
While adding or retrieving records to / from internal table we have to keep the record temporarily.
The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
e.g.
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
The header line is a field string with the same structure as a row of the body, but it can only hold a single row.
It is a buffer used to hold each record before it is added or each record as it is retrieved from the internal table. It is the default work area for the internal table
1) The difference between
whih header line and with out heater line of internal table.
ex:-
a) Data : itab like mara occurs 0 with header line.
b) Data: itab like mara occurs 0.
-While adding or retrieving records to / from internal table we have to keep the record temporarily.
-The area where this record is kept is called as work area for the internal table.
-The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
-Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
a) Data : itab like mara occurs 0 with header line.
table is with header line
b) Data: itab like mara occurs 0.
table is without header line
2)work area / field string and internal table
which one is prefarable for good performance any why ?
-The header line is a field string with the same structure as a row of the body, but it can only hold a single row , whereas internal table can have more than one record.
In short u can define a workarea of an internal table which means that area must have the same structure as that of internal table and can have one record only.
Example code:
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
Regards,
Padmam. -
What are the usual date field validations
Hi all,
can you please tell me what are the usual date field validations in selection Screen
Thanks and regards ,
Madhavi pillaOnce you declare it as TYPE SY-DATUM, usually that is enough. Sometimes we will also check that it is not less than '18000101' or greater than '99991231'. Or if you have a specific date range that applies to your program you could check the field contents against that. I hope this helps.
- April King -
What are the methods to modify SAP standard tables?
hi
what are the methods to modify SAP standard tables?.APPEND structures AND CUSTOMIZING INCLUDES.
these are the two methods.. but customizing includes we, as a developers do not use.
generally we use .APPEND structures to modify standard tables.
note that we need an access key to modify atandard tables.
we can create an apend structure and add that structure to the standard table at the end.
note that .append structures should only be added only at the end.
that is the reason we use .append structures to modify standard tables.as we should not include a field in the middle and disturb the original order of the standard table fields as it may effect many objects depending on the standard table.
but Some standard tables for which there is a LONG datatype field can never be modified.
the reason is the LONG datatype field should always be there at the end and also .APPEND strutures should always be there at the end. there will be a conflict. so, some standard tables can not be appended. -
PAL or NSTC, how can i tell what format the vid clip is?
The 2nd abbreviation might be wrong...
concerning vid clips
How can you tell what format clips are in before iMovie tells you?
I don't want to combine the formats and cannot figure a way to tell the difference before trying to burn the dvdAt the top of the iMovie project window it will tell you by giving the name you gave to the project as well as 'DV NTSC, or DV NTSC Widescreen.
Somewhat confusingly, when you set your choice of NTSC or PAL in iMovie's preferences when starting a new project (you can't switch later), these are only identified as 29.95 fps (which is NTSC) and 25 fps (which is PAL). Once you have set that, all iMovie projects you start will default to the same until you change it. You cannot combine the formats in the same project.
As you are in the USA yours will probably default to NTSC which is the TV system you use there. In Europe we set it to PAL which is what we use here.
A bit rudely, we also say that NTSC stands for 'Never The Same Colour Twice'!
PAL used to stand for 'Prolongs Active Life', but that was actually the tag-line in a dog food commercial! But they are useful mnemonics to remember them by! -
How to find out what are the interfaces used for Job and Job Codes
HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
SunnyHi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya -
Can anyone tell what are the fact tables and dimension tables available in banking domian
what are the fact and dimension tables available in banking domain.
maximum how many fact and dimension tables we can keep in the banking projectHi Srikanth Korrapati,
Please have a look on this book
The Data Warehouse Toolkit: The Complete Guide to Dimensional Modeling By Ralph Kimball & Margy Ross.
Here is the below link completely about the Banking Case Study from DW Toolkit.
The Data Warehouse Toolkit: The Complete Guide to Dimensional Modeling - Banking Case Study
Hope this will help you out
Regards,
Akhileshkiran.
Maybe you are looking for
-
Adobe Inspiration Browser Update and Adobe Air won't download/install?
I get repeated error messages, that it won't download/install. I followed the instructions. All I get is "a download error occurred. Try again?" Not much help there!!!!!! Now what?
-
I have installed grid agent on different server. When i ran emctl status agent i am getting below error. EM Configuration issue. /u01/app/oracle/product/10g/hostname.com_ORCL. OS is AIX Thanks in advance...
-
Running the G server and labview web server as a stand-alone serve
Hello, Now I am running the G web server from the Internet toolkit cooprating with the Labview default web server because I need the server to handle both GCI reguests and the requests of the remote panel. Now I have a question. Is there any way to
-
I have a spot on the lenss can I clean it ?
I took a video and there is a very small dust/dot in the frame. at the same location it all of the film. can I clean it ? I have PE 8
-
I have received a 'Verification Failed' message while trying to set up icloud on my ipad. Can anyone help please?