How can pass any one column value

hi all,
i have table and i am quering that table like
select d_type,d_number,d_date,draccount,craccount
from d_table
where d_date = :parameter.d_date
and draccount or craccount = :parameter.code--here user may enter any code which may belongs to draccount or craccount how can check that in my query?Please help me..
Thanks..

Hi,
A slight variation on Tubby's solution:
select d_type
,     d_number
,     d_date
,     draccount
,     craccount
from      d_table
where      d_date           = :parameter.d_date
and      :parameter.code IN (draccount, craccount)
user13329002 wrote:hi,
even i was trying the same. what happen if the parameter value present in both the columns?
both column's records will be displayed right..What happens when you try it?
If that's what you want, what's the problem?
If that's not what you want, what's the problem? Post a little sample data (CREATE TABLE and INSERT statements) and the results you want from that data.
Do you want to use the condition :parameter_code = craccount only when the other condition, :parameter_code = draccount, produces no results? If so, use a CASE expression (or the DENSE_RANK function).

Similar Messages

How Can I get multi column values from dynamic search help?

Hi Gurus;
I'm using dynamic search help in my program.
I want to get multi column values from search help. But I dont know solution for this issue.
I'm using F4IF_INT_TABLE_VALUE_REQUEST FM.
How Can I get multi column values from dynamic search help?
Thanks.

Believe it or not, the same FM worked for me in a dynpro. I will try to explain here how it works in custom screen and then you can do your work for other screens or program types. I am not going to write my actual work but will explain in general.
I have 4 fields (FLD1, FLD2, FLD3, FLD4) and i made the search based on FLD2 and when user click on a line (could be any field), then this would bring the line on to the screens.
There are like 3 steps.
You have your value_tab for my fields FLD1, FLD2, FLD3 and FLD4. This is just the data that we pass into the FM. (data: IT_VALTAB type table of ZVAL_TABLE)
Next map the screen fields into an internal table (data: It_dynpfld type table of dselc ). I also have other internal tables defined (just to keep it straight, i will be putting here) data: It_return type standard table of ddshretval.
Next step is to call the function module. Make sure you have values in IT_VALTAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
 retfield = 'FLD2'
 value_org = 'S'
 tables
 value_tab = It_VALTAB
 return_tab = It_return
 dynpfld_mapping = It_dynpfld
 exceptions
 parameter_error = 1
 no_values_found = 2
 others = 3.
 if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 else.
 perform get_selected_fields tables It_return.
 endif.
The code within the perform GET_SELECTED_FIELDS - We need to map the result fields after user selects it. The code goes like this. This is step is to update the dynpro fields.
I need a internal table as well as a work area here. like,
data: lt_fields type table of dynpread,
 la_fields type dynpread.
field-symbols: <fs_return> type ddshretval.
so fill out LT_FIELDS from the IT_RETURN table
loop at lt_return assigning <fs_return>.
 la_fields-fieldname = <fs_return>-retfield.
 la_fields-fieldvalue = <fs_return>-fieldval.
 append la_fields to lt_fields.
 clear: la_fields.
endloop.
Call the FM to update the dynpro
call function 'DYNP_VALUES_UPDATE'
 exporting
 dyname = sy-repid
 dynumb = '1002' "This is my screen number. You could use 1000 for selection screen (hope so)
 tables
 dynpfields = lt_fields
 exceptions
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 others = 8.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
good luck

How can I separate one column into multiple column?

How can I separate one column into multiple column?
This is what I have:
BUYER_ID ATTRIBUTE_NAME ATTRIBUTE_VALUE
0001 PHONE_NUMBER 555-555-0001
0001 EMAIL [email protected]
0001 CURRENCY USD
0002 PHONE_NUMBER 555-555-0002
0002 EMAIL [email protected]
0002 CURRENCY USD
0003 PHONE_NUMBER 555-555-0003
0003 EMAIL [email protected]
0003 CURRENCY CAD
This is what I would like to have:
BUYER_ID PHONE_NUMBER EMAIL CURRENCY
0001 555-555-0001 [email protected] USD
0002 555-555-0002 [email protected] USD
0003 555-555-0003 [email protected] CAD
Any help would be greatly appreciated.

This is another solution. Suppose your actual table's name is test(which has the redundant data). create a table like this:
CREATE TABLE test2 (BUYER_ID number(10),PHONE_NUMBER varchar2(50),EMAIL varchar2(50),CURRENCY varchar2(50));
then you will type this procedure:
declare
phone_number_v varchar2(50);
EMAIL_v varchar2(50);
CURRENCY_v varchar2(50);
cursor my_test is select * from test;
begin
for my_test_curs in my_test loop
select ATTRIBUTE_VALUE INTO phone_number_v from test
where person_id=my_test_curs.person_id
and attribute_name ='PHONE_NUMBER';
select ATTRIBUTE_VALUE INTO EMAIL_v from test
where person_id=my_test_curs.person_id
and attribute_name ='EMAIL';
select ATTRIBUTE_VALUE INTO CURRENCY_v from test
where person_id=my_test_curs.person_id
and attribute_name ='CURRENCY';
INSERT INTO test2
VALUES (my_test_curs.person_id,phone_number_v,EMAIL_v,CURRENCY_v);
END LOOP;
END;
Then you will create your final table like this:
create table final_table as select * from test2 where 1=2;
After that write this code:
INSERT ALL
into final_table
SELECT DISTINCT(BUYER_ID),PHONE_NUMBER,EMAIL,CURRENCY
FROM TEST2;
If you have a huge amount of data in your original table this solution may take a long time to do what you need.

Pages: How can I sort one column of words and not have it affect the other columns?

How can I sort one column of words and not have it affect the other columns? I have opened the inspector to the edit columns and rows under Table. It will sort the column, but then it changes the other colums as well. I know that if I use Numbers, it will work, but I want to know how to do the same thing in Pages.

Hi Peter,
Numbers sorts full rows on values in selected column(s). The technique for sorting a single column is essentially the same as Jerry is describing for Pages tables—separate the (data in the) column to be sorted, sort it, return it to the table.
In Numbers the actual column may be separated from the original table, sorted, then returned. In Pages, the data must be extracted, sorted, then pasted back in, overwriting the unsorted data (if it was left in the original table).
iWork tables follow a database model in which each row is a Record, and each column holds a Field within the records.
As evidenced by the current question (and several similar questions arising in the Numbers community) that model doesn't apply to the way some users, especially some who come in from the MS Excel world, use tables.
With Excels model—islands of data on a single large table, the ability to sort one or a selected few columns of data makes sense. One 'island' may comprise only cells AA21:AH50. Sorting that small 'table' should be possible without disturbing the rest of rows 21-30, which are probably part of one or more other 'data islands' in the sea that is a MS Excel spreadsheet.
In Numbers, each of those 'islands' would be a separate Table, and that Table would be sortable without disturbing other Tables in the document.
Regards,
Barry

How can I modify one column of current and next record depending of some criteria?

Having DDL
CREATE TABLE #ServiceChange(
[ID] [int] identity(1,1),
[SHCOMP] [char](2) NOT NULL,
[SHCRTD] [numeric](8, 0) NOT NULL,
[SHCUST] [numeric](7, 0) NOT NULL,
[SHDESC] [char](35) NOT NULL,
[SHTYPE] [char](1) NOT NULL,
[SHAMT] [numeric](9, 2) NOT NULL,
[CBLNAM] [char](30) NOT NULL,
[GROUPID] [char](2) NULL
And original and desire data in below link
https://www.dropbox.com/sh/bpapxquaae9aa13/AADnan31ZASublDjN7sa2Vvza
I would like to know how can I modify one column of current and next record depending of some criteria using SQL2012?
The criteria is:
Type should always flow F->T
if current abs(amount)> next abs(amount) then groupid = 'PD'
if current abs(amount)< next abs(amount) then groupid = 'PI'
there is no case when those amounts will be equals
where current(custid) = next(custid) and current(service) = next(service) and groupid is null
Any help will be really apreciated.
Thank you

I tried that and got this error
'LAG' is not a recognized built-in function name.
You said you were using SQL 2012, but apparently you are not. The LAG function was added in SQL 2012. This solution works on SQL 2005 and SQL 2008:
; WITH numbering AS (
 SELECT groupid,
rowno = row_number() OVER (PARTITION BY custid, service ORDER BY date, id)
 FROM #ServiceChange
), CTE AS (
 SELECT a.groupid,
CASE WHEN abs(a.amount) < abs(b.amount) THEN 'PD'
 WHEN abs(a.amount) > abs(b.amount) THEN 'PI'
END AS newgroupid
 FROM numbering a
 JOIN numbering b ON b.custid = a.custid
AND b.service = a.service
AND b.rowno = a.rowno - 1
UPDATE CTE
SET groupid = newgroupid
Erland Sommarskog, SQL Server MVP, [email protected]

How can i select other column values('-' separated) in group by function

CREATE TABLE EMP (
     EMPNO NUMBER(4) NOT NULL,
     ENAME VARCHAR2(10),
     JOB VARCHAR2(9),
     SAL NUMBER(7)
INSERT INTO EMP(EMPNO, ENAME, JOB, SAL) VALUES (7369, 'SMITH', 'CLERK', 800);
INSERT INTO EMP(EMPNO, ENAME, JOB, SAL) VALUES (7499, 'SMITH', 'SALESMAN', 1600);
INSERT INTO EMP(EMPNO, ENAME, JOB, SAL) VALUES (7521, 'ALLEN', 'SALESMAN', 2400);
In Output I want 3 columns : EMP,SUM(SAL),JOB(hyphenSeparated)
Means i want my output like
First row : SMITH,2400,CLERK-SALESMAN
Second row : ALLEN,2400,SALESMAN
I tried to write following sql : select ename,sum(sal) from emp group by ename
But i want other colummn value in '-' separated. but group by is only allowing agreegated function.
How can i select other column value using group by function.

SQL> select ename,sum(sal), listagg(job, '-') within group (order by job) as job from emp group by ename;
ENAME        SUM(SAL) JOB
ALLEN            2400 SALESMAN
SMITH            2400 CLERK-SALESMANnote: LISTAGG is a feature of 11.2

How can I Make one column into Multiple columns

Id
SCM-01-015
SCM-01-020
SFA-02-021
SFC-02-042
STB-03-035
STP-04-167
SVF-06-150
I want the output like this
Id 01 02 03 04 06
SCM-01-015 5
SCM-01-020 10
SFA-02-021 15
SFC-02-042 15
STB-03-035 20
STP-04-167 50
SVF-06-150 5
thank you in advance

Hi,
801668 wrote:
Id
SCM-01-015
SCM-01-020
SFA-02-021
SFC-02-042
STB-03-035
STP-04-167
SVF-06-150
I want the output like this
Id 01 02 03 04 06
SCM-01-015 5
SCM-01-020 10
SFA-02-021 15
SFC-02-042 15
STB-03-035 20
STP-04-167 50
SVF-06-150 5
thank you in advanceWhenever you post formatted text (such as query output) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after formatted text, to preserve spacing.
Do you want output something like this, which is from the scott.emp table?ENAME ANALYST CLERK MANAGER PRESIDENT SALESMAN
ALLEN 1600
JONES 2975
FORD 3000
CLARK 2450
MILLER 1300
SMITH 800
WARD 1250
MARTIN 1250
SCOTT 3000
TURNER 1500
ADAMS 1100
BLAKE 2850
KING 5000
JAMES 950
(ALLEN is a SALESMAN, JONES is a MANAGER, ..., JAMES is a CLERK.)
If so, do a pivot, somehting like this:SELECT     ename
,     MIN (CASE WHEN job = 'ANALYST' THEN sal END)     AS analyst
,     MIN (CASE WHEN job = 'CLERK' THEN sal END)     AS clerk
,     MIN (CASE WHEN job = 'MANAGER' THEN sal END)     AS manager
,     MIN (CASE WHEN job = 'PRESIDENT' THEN sal END)     AS president
,     MIN (CASE WHEN job = 'SALESMAN' THEN sal END)     AS salesman
FROM     scott.emp
GROUP BY ename
Always say which version of Oracle you're using.
The query above will work in Oracle 8.1 or higher, but starting in Oracle 11 there's a better way: SELECT ... PIVOT.

How to get one column value from a DOCUMENT TYPE attribute

Hi,
I have created a DOCUMENT TYPE attribute which queries from a table and all the column values( For Ex: Customer Name, Contact Name and Address) are displayed in the message body.
I want one column value(For Ex: Customer Name) to be displayed in the SUBJECT of the message.
How can this be done? Please let me know.
Thanks in advance.

Thanks Matt. I have used SETITEMATTRTEXT to get a single column value into an ITEM ATTRIBUTE.
Please see the following procedure...
==========================================================
PROCEDURE MisNotifyDataDesk(
     itemtype IN VARCHAR2
     , itemkey IN VARCHAR2
     , actid IN NUMBER
     , funcmode IN VARCHAR2
     , resultout OUT VARCHAR2
     ) IS
p_Cart_Id               VARCHAR2(30);
p_ORG_NAME                     VARCHAR2(360);
BEGIN
     IF funcmode != WF_ENGINE.ENG_RUN THEN
          wf_log_pkg.string(5,'Notify_Cust_Data_Desk','Not in RUN mode');
     RETURN;
     END IF;
p_Cart_Id := WF_ENGINE.GetItemAttrText ( itemtype => itemtype
, itemkey => itemkey
, aname => 'CART_ID' );
p_code_position := 10;
     SELECT
          ORG_NAME
     INTO
          p_ORG_NAME
     FROM
          MISIBE_END_CUST_DETAILS
     WHERE
          QUOTE_HEADER_ID = p_Cart_Id;
-- For TEXT BODY
WF_ENGINE.SETITEMATTRTEXT(itemtype => itemtype , itemkey => itemkey , aname => 'ORG_NAME',avalue => p_ORG_NAME);
resultout := WF_ENGINE.ENG_COMPLETED||':'||CUST_DATA_CHECK(p_Cart_Id);
EXCEPTION
     WHEN OTHERS THEN
          WF_CORE.context (
          'WFCustCheck',
          'MisNotifyDataDesk',
          itemtype,
          itemkey,
          TO_CHAR(actid),
          funcmode,
          SQLERRM
RAISE_APPLICATION_ERROR (-20005, SQLERRM);
===========================================================
I am using &ORG_NAME in the body and subject of my message. But the value is
not retrieved into the ITEM ATTRIBUTE when I run my process. It is just displaying in the message and the subject of hte message as "&ORG_NAME"
CUST_DATA_CHECK used in the resultout, is a function which returns 'T' or 'F'. That part is working fine. Just retrieving the ORG_NAME in the ITEM ATTRIBUTE is not working.
Am I going wrong somewhere? Please let me know.
Thanks,

How can I reference the last value in a column?

How can I reference the last value in a column? For example, today I want the value of A1 to appear in another cell. Tomorrow, I will add a row and want to reference A2, next day A3, and so forth.

Now I got it:
=OFFSET(A1,COUNT(A)-1,0)

How can I get one value from local machine registry

how can I get one value from local machine registry, I would like read one value of regitry. I have windows NT workstation. I need it to find the full path of iexplore.exe, this value is in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\IEXPLORE.EXE'
Thanks.

You can use the D2KWUTIL.pll library to read/write to the registry. You have to install the forms examples to get the library.
The library d2kwut32.dll must also be installed at the clients.

How can we get Dynamic columns and data with RTF Templates in BI Publisher

How can we get Dynamic columns and data with RTf Templates.
My requirement is :
create table xxinv_item_pei_taginfo(item_id number,
Organization_id number,
item varchar2(4000),
record_type varchar2(4000),
record_value CLOB,
State varchar2(4000));
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
select * from xxinv_item_pei_taginfo;
Item id Org Id Item Record_type Record_value State
493991     224     1265-D30     USES     fever     TX
493991     224     1265-D30     HOW TO USE     one tablet daily     TX
493991     224     1265-D30     SIDE EFFECTS     XYZ     TX
493991     224     1265-D30     DRUG INTERACTION     ABC     TX
493991     224     1265-D30     OVERDOSE      Go and see doctor     TX
493991     224     1265-D30     NOTES     Take after meal     TX
Above is my data
I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
its a BI Publisher report.
please suggest

if you have data in db then you can create xml with needed structure
and so you can create bip report
do you have errors or .... ?

How can i change the column label text in a alv table display

how can i change the column label text in a alv table display??
A similar kinda of question was posted previuosly where the requirement was the label text was needed and following below code was given as solution :
* declare column, settings, header object
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
DATA: lr_column_header type ref to CL_SALV_WD_COLUMN_HEADER.
get column by specifying column name.
lr_column = lr_column_settings->get_column( 'COLUMN_NAME1' ).
set Header Text as null
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( ' ' ).
My specific requirement is i have an input field on the screen and i want reflect that value as the column label for one of the column in the alv table. I have used he above code with slight modification in the MODIFYVIEW method of the view since it is a process after input. The component gets activated without any errors but while run time i get an error stating
"The following error text was processed in the system CDV : Access via 'NULL' object reference not possible."
i have checked in debugging and the error occured at the statement :
lr_column = lr_column_settings->get_column( 'CURRENT_YEAR' ).Please can you provide me an alternative for my requirement or correct me if i have done it wrong.
Thanks,
Suri

I found it myself how to do it. The error says that it is not able to find the reference object i.e it is asking us to refer to the table. The following piece of code will solve this problem. Have to implement this in WDDOMODIFYVIEW method of the view. This thing works comrades enjoy...
DATA : lr_cmp_usage TYPE REF TO if_wd_component_usage,
 lr_if_controller TYPE REF TO iwci_salv_wd_table,
 lr_cmdl TYPE REF TO cl_salv_wd_config_table,
 lr_col TYPE REF TO cl_salv_wd_column.
DATA : node_year TYPE REF TO if_wd_context_node,
 elem_year TYPE REF TO if_wd_context_element,
 stru_year TYPE if_alv_layout=>element_importing,
 item_year LIKE stru_year-i_current_year,
 lf_string TYPE char(x),
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_header TYPE REF TO cl_salv_wd_column_header.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
Get the entered value from the input field of the screen
node_year = wd_context->get_child_node( name = 'IMPORTING_NODE' ).
elem_year = node_year->get_element( ).
elem_year->get_attribute(
 EXPORTING
 name = 'IMPORT_NODE-PARAMETER'
 IMPORTING
 value = L_IMPORT_PARAM ).
WRITE L_IMPORT_PARAM TO lf_string.
Get the reference of the table
lr_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
 lr_cmp_usage->create_component( ).
ENDIF.
lr_if_controller = wd_this->wd_cpifc_alv( ).
lr_column_settings = lr_if_controller->get_model( ).
get column by specifying column name.
IF lr_column_settings IS BOUND.
 lr_column = lr_column_settings->get_column( 'COLUMN_NAME').
set Header Text as null
 lr_column_header = lr_column->get_header( ).
 lr_column_header->set_text( lf_string ).
endif.

How to pass the FORM Fields value by Form Personalization

Hi ALL,
I want to pass form filds values in to procedure. I am calling this procedure through form personalization of that form..... But it's not accepting any form field's value there... when i am passing hardcoded vales procedure is executing fine...
can any one suggest what to do???
i tried with these syntax
TEST_EMP_FP(:ADDR.ADDRESS_ID,'ABC')
TEST_EMP_FP(${item.ADDR.ADDRESS_ID.value},'ABC')
Regards
Ravi

Hi,
Iam calling an SRS from forms personlization. Can any body tell me how to pass the Form field values as parameters to the Reports. (Example when they call this Concurrent request from Transact5ions screen, The invoice number should be defaulted in the report parameter).
Regards,,
Anil.

How can i use one SQL statement to solve problem?

How can i use one SQL statement to solve the question below?
For a Table named A, there is a column named F(char type).
Now select all the records where F like '%00' and update their F value to '%01'
Just one SQL statement.Do not use PL/SQL block.
How to do that?
Thanks.

What is the data volume for this table?
Do you expect lots of rows to have '%00' as their value?
Following two statements come to mind. Other experts would be able to provide better alternatives:
If you have index on SUBSTR(f, 2):
UPDATE A
SET    f = SUBSTR(f,
                  1,
                  length(f) - 2) || '01'
WHERE substr(f,
              -2) = '00';If most of the rows have pattern '%00':
UPDATE A
SET    f = SUBSTR(f,
                  1,
                  length(f) - 2) ||
           DECODE(SUBSTR(f,
                         -2),
                  '00',
                  '01',
                  SUBSTR(f,
                         -2));

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

How can pass any one column value

Similar Messages

Maybe you are looking for