How can query the table MARD using the parameters

Hi,
I have inputs as material number , sales organization , distribution chanel and plant , using this i have query the table MARD . in MARD table material number and plant is available , how can i relate sales organization and distribution chanel to query the table, please help.
Regards,
Ratheesh

Hi,
MVKE table contains the relationship between material, sales org. and distribution channel.
You can hence create a join between MARD and MVKE tables and create a query.
Regards,
Aditya

Similar Messages

  • How can i import tables from a different schema into the existing relational model... to add these tables in the existing model? plss help

    how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
    note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
    can I import the same way as I did previously??
    but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
    please help ...
    thanks

    Hi,
    Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
    You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
    In step 1 use a suitable database connection that can access the relevant table definitions.
    In step 2 select the schema (or schemas) to import.  The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
    In step 3 select the tables to import.  (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
    After the import itself has completed, the "Compare Models" dialog is displayed.  This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
    Just selecting the Merge button should apply all the additions and changes in the new import.
    Having updated your Relational Model, you can then update your Logical Model.  To do this you repeat the "Engineer to Logical Model".  This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
    Just selecting the Engineer button should apply all the additions and changes.
    I hope this helps you achieve what you want.
    David

  • How to hide system tables when using the Oracle SQL Developer?

    Hi,
    I would like to know how can I show only the tables that I created under the Tables tree? I didnt find a way to create a separate database using the Oracle Sql Developer. I see all the tables together, and would like to differentiate between different databases.
    Can anyone explain to me how to do these things?
    Thanks,

    Hi,
    I would like to know how can I show only the tables that I created under the Tables tree? Your posting is not clear,again tell something more on tables tree,what u want to achieve with it.
    How to hide system tables when using the Oracle SQL Developer? if u connected with sys, system or user with dba role then u have a privilege to see these tables,so revoke the privilege/role from ur user to view this tables if ur connected other then sys,system,
    I didnt find a way to create a separate database using the Oracle Sql Developer. DBCA is a tool for creating the new database.
    Kuljeet

  • How to query the count of the temporary table from user_objects

    e.g. select count(*) from user_objects where object_type='TABLE'
    According to the SQL,I can query the all table including the temporary table,Can I how to query the count of the temporary table from user_objects excluding the permanent table?
    thanks a lot!

    select count(*)  from user_objects where object_type='TABLE' and temporary = 'Y'

  • I have two Apple ID, how can I delete one and use the email address associates to the main one?

    I have two Apple ID, how can I delete one and use the email address associates to the main one?

    If you abandon one of the Apple IDs you will also basically be abandoning any content that you have acquired with that Apple ID. Content can only be updated and re-downloaded with the Apple ID that was used to buy it. Apple will not combine the content of Apple IDs and Apple will not transfer the content from one Apple ID to another Apple ID.

  • HT1539 How can a digital copy be used in a household with multiple apple ids, synced on the same computer?

    How can a digital copy be used in a household with multiple apple ids, synced on the same computer?  I want to put a digital copy on my device, and on my wife's device.
    Please help.

    you're welcome.
    actually, unless you take an extra step, the first opened swf will close.  if you want the 2nd to close, the initial receiving lc will send a message to sender that causes the sender to close.

  • How can i reformat my harddrive using the recovery disk stored in partition drive?

    hi guys! i need help. i need to reformat my harddrive and i will do this for the first time. however, i was not ablt to make the recovery disk since i purchased the tx2 1275dx laptop last july 2009. what i have is a recovery disk stored in a partition harddrive. how can i reformat my cpmputer using the recovery disk in partition harddrive? my OS is windows vista.  thank you...  

    Hi,
    Shutdown the notebook.  Tap away at f11 as you start to access Recovery Manager which you can then use to reinstall the Operating System.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Itunes and proxy settings. Itunes keeps the proxy setting from IE and I can't adapt it due to company policy. How can I force itunes to use firefox?

    itunes can not connect to server and I can't find its proxy settings.
    So I think it uses these from IE and those are blocked by company policy.
    So, how can I force itunes to use the firefox settings

    I fixed this issue (with help from tech support) and it involved several things.
    After adding a song to iTunes, right-click on the song in iTunes and select "Update iTunes Match."
    OR go to the iTunes menu-->Store-->Update iTunes Match.
    Maybe that's the reason, it just hadn't updated to the cloud.
    OR maybe it's not a high-enough bitrate file.   This happens to me because most of my tunes are home-recorded.
    Sometimes converting to .mp3 or Create AAC version might work. (You do this with a right-click in iTunes, and then you will want to remove the original file from iTunes.)
    There is an iTunes Preferences setting, under General Preferences called Import Settings.  Try setting it to AAC Encoder and iTunes Plus.   That (I think) causes imports to be slightly better quality.
    Good luck!  The tech support person at Apple is requesting that a knowlege-base article be written about this.

  • I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

    i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

    I have exactly the same problem.
    I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
    Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
    Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
    The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
    What the **** Is The Microsoft Deal with all of this!?!?
    PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
    If anyone has a link, it would be appreciated.
    Message was edited by: nostrawaggus

  • When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

    When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

    The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

  • When printing in Excel It is always want to use the acrobat X pro trial, which the trial is expired. I do not want to use acrobat X pro trial anymore. How can I reset it and use simple acrobat to print my PDF document?

    When printing in Excel It is always want to use the acrobat X pro trial, which the trial is expired. I do not want to use acrobat X pro trial anymore. How can I reset it and use simple acrobat to print my PDF document?

    Hi screen name,
    Adobe PDF printer gets installed when you install Acrobat 10 Pro.
    To use this printer you need to purchase Acrobat. Once the trial period is over you cannot use the printer to create pdf files.
    An alternative way for you is to utilize Microsoft's own inbuilt pdf engine.
    You can simply open the file and select 'Save as' and in the type list select 'pdf'
    Please refer : http://office.microsoft.com/en-in/excel-help/save-as-pdf-HA010354239.aspx
    Regards,
    Rave

  • Developing a 2 page form, username on the 1st page, password on 2nd how can i force FF to use the username from previous page when it asks to remember acct info?

    I am developing a 2 page signup form, where the person enters their username on the 1st page and password on the 2nd.
    When I test the form, FF asks to remember my password for the site - however it thinks the zipcode (field above the password) is the username on the account.
    I have tried to put their username/email in a hidden field on the 2nd page, just above the password field - and that did not work.
    How can i force FF to use the username from previous page when it asks to remember acct info?

    This website is using autocomplete=off to prevent Firefox from saving and filling the name and password.
    You can remove autocomplete=off with a bookmarklet to make Firefox save names and passwords and other form data.
    *http://kb.mozillazine.org/User_name_and_password_not_remembered

  • Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!

    Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!

    iWeb uses the domain.sites2 files to store its assets.
    You'll find it here :
    ~/Library/Application Support/iWeb/
    where ~ is your Home directory.
    If you take a computer with you, you have to store that file in the same location.
    It's not different from taking documents with you if you want to edit them.
    A solution is to remotely control your computer at home.
    TeamViewer, LogMeIn, Apple Remote Desktop or any VNC application you can use, like "Chicken of the VNC".

  • How to query the apex base tables .

    Hi,
    I need to apex tables from whic w can query the following.
    a. workspace information , workspace id's
    b. application information , application id's and schemas to which the application is linked to
    c. application users
    Thanks in advance.
    Regards
    Nikhil

    Nikhil,
    apex_workspaces, apex_applications and apex_workspace_apex_users views will give you the required information.
    also apex_dictionary view will give you list of all available apex views.
    Thanks,
    Manish

  • HT5654 how can i update my iphone use itunes on the computer

    how can i update my iphone use itunes on the computer

    How to update an iDevice  Scroll down to the section about updating via iTunes on the computer.

Maybe you are looking for