How can the browser auto-refresh not be considered a bug?

I have been browsing these forums and I have seen this issue over and over again being discussed and the answer is always "that's not a bug, that's how it works, you can't change or disable it."
Here is the problem. In ios 7, when you are using Safari (or any other browser, I have found), if you exit the browser to do almost anything: your phone rings, you open the camera and take a picture - anything at all - when you return to the browser, the current page will almost always reload itself. Anything you have done on that page, any comment written, any checkboxes checked - everything - will be lost.
This is an important issue for me, because I have written a web application that I use every single day for work. My web application is a 560k page of pure html/javascript (no third party or plugin content at all, I wrote it all by hand) with about another 80k worth of graphics (buttons). You load the page and javascript functions move you from div to div, with different sets of checkboxes in each div (there are some 87 such divs in the page). At the end of this process, you click a button to finish your checklist, which will save it to a database and you're done. Unfortunately, this process would never get to the end because of the page constantly refreshing.
So I rewrote the page to save via ajax at each major section (there are 8 major sections). Dividing it up this way meant that all of your work is never lost and that you only have to go back and redo at most one section. When I rewrote it this way and I was still using ios 6, it was only a minor annoyance. I might have to redo a section once or twice a week because of a page refresh.  Ever since the upgrade to ios 7 however, it has become a pain again, because now the page refreshes almost every single time. The problem is that while doing this checklist, I have no choice but to go to the camera to take pictures documenting what I am checking boxes about. This switch to the camera and back again almost always forces a page refresh.
It strains credibility to think that a 640k web page has to be cleared out every time you do anything. I have only this page open in the browser, nothing else going on, nothing else loaded, all apps closed - and still, the browser will be force refreshed every time I do anything. The iphone 4s has 512M of memory, so my page occupies 640k of 524288k, or .001% of the available memory. Do you really have to refresh this thing every single time I sneeze?
How can this not be considered a bug, clearing out everything that can be cleared out regardless of what impact it might have on the user experience?
And finally, can anyone at all suggest any kind of a workaround? People have been complaining about this since at least 2008. I'm at my wits end, its making my web app nearly unusable.

OK...after better keyword choices I did find that the 'change location' solution does work, but only if the calendar is first shared with the world, and then has its location changed:
  http://www.radbrooksolutions.co.uk/rs/Blog/Entries/2011/5/3_MobileMe_Calendar_Up date_and_PHP_iCalendar.html
Does anyone know if information in public calendars can be found in nefarious ways (like by Google)?
FWIW, I did try sharing privately to just myself, so that I could then subscribe to the calendar on the serving machine and push it out as a .ics file...but I cannot share a calendar with myself. Boooo.

Similar Messages

  • How can I stop auto refreshing a new web page in XP immediately after its opened?

    In XP, once I access a new web page Firefox auto refreshes that page once the page is ~80-90% opened - how can i stop this refresh?

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • How can the program auto do something in particutar time???

    Hello everyone.
    I want the program can check the time periodically, and then in particular time to do something.
    For example: At 1:00 , the system can auto to send the movie to the client.
    How can the system check the system time automatically????
    Thanks for help.

    You could use a Timer to check the time every minute and act accordingly when the time matches some preset value.
    java.util.Timer I believe is the class.

  • Hi there!  How can I disable auto refresh in Safari 4.0.4?

    I find the auto refresh of websites irritating.  Sites even refresh while viewing an imbedded video, forcing you to restart the vid.
    Some sites specifically: Drudgereport.com & Instapundit.com
    Thanks for any help  offered!
    Jim in Guam

    Sadly this did not fix the problem.  Also having turned JavaScript off, trying it out, and reverting to JavaScript back on, now videos don't play in Safari.  Also, I asked for info on Safari 4.0.4, which should have been 5.1.5.
    Thanks for the effort in any event!
    Jim

  • How can the user authorization  "Display , not Edit" be fixed?

    Hi,
    I need to give users the authorization to "DISPLAY" a transaction (e.g. VKM1). They are not allowed to "EDIT" or "RELEASE DOCUMENTS".
    How can I do that?
    Thank you for your feedback.
    Kind regards,
    Linda

    for every transaction code there will be objects which is linked to the transactions code.
    For ex:- For  VKM1 Transaction code there are two objects (V_KNKK_FRE, V_VBUK_FRE)  with activity 03(display) and 23(maintain). So,  give the authorisation activity 03 to the transaction.  So, users can able to see the data but not having the authorisation to release or maintain.
    Reward points if helpful

  • How can I make firefox highlight new unread items on Drudge when the page auto-refreshes

    So I read Drudge Report and checkit a few times a day. It would be nice to have the unread news items highlighted. The new items that appear after the page auto refreshes. It just occurred to me whilst writing this that I would have to open every link on the page to make the task of highlighting new content easier. I don't know but if there's a way to have the new unread items highlighted it would save time scanning the whole page for new stuff.
    Thanks,
    Mark

    Have you tried to subscribe to the page?
    '''https://support.mozilla.org/en-US/kb/how-subscribe-news-feeds-and-blogs?esab=a&s=subscribe&r=0&as=s'''

  • How can i delete search histiory, (not just browser history, j.jc

    how can i delete search history, ( not just browser h' i can do that) j.c.
    == This happened ==
    Every time Firefox opened
    == long time ago

    See [[Clear Recent History]] and http://kb.mozillazine.org/Deleting_autocomplete_entries
    See also http://kb.mozillazine.org/Search_Bar
    You can remove passwords in the Password Manager:
    Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"

  • I want to give away or sell a 6500/250 running 7.6.1. How can the hard disk be erased so that the data are gone, not recoverable? thanks, LifeisRich

    I want to give away or sell a 6500/250 running 7.6.1. How can the hard disk be erased so that the data are gone, not recoverable? thanks, LifeisRich

    I'd recommend that you check for Mac User Group(s) in Orange County.  That's where you'd likely find a diehard Mac fanatic who might want to add your 6500 to his/her collection.  Even if you got nothing for it, it would be better than e-cycling it.  I upgraded my 6500/275 with what was a "large" hard drive at the time (15 GBs), maxed the memory at 128 MBs, installed the 512K L2 cache card, a better ATI Rage Pro PCI graphics card, a USB PCI card, and an internal 56K modem.  With it running OS 9.1, it did all of the pre-OS X stuff I needed it to do.  As I previously mentioned, it's a nice-sounding MP3 player.  Internet Explorer 5.1.7 (the final release from 2001) kept it useful for surfing the web up until 2005, when it became too outdated/incompatible with many web sites.  Unfortunately, the demands of the internet and the need for a modern browser, as well as faster processing to digest it all, are what retired many older Macs from active duty.  So my (2) 6500s and (3) 6400s (same tower design) sit in storage.  There is one concern that I'll pass along: The motherboard has a 4.5-volt alkaline battery, that's a small, black plastic cube, secured in place by velcro.  If your 6500 has been disconnected from electricity for a long time, the battery will undoubtedly be dead.  Unlike the many Apple computers that used a small ½AA lithium battery (that I've never seen leak when completely dead), the 6500's battery can and usually does start leaking.  Because the motherboard sits vertically oriented on its side edge when installed, the leaking battery will drip alkaline solution down the board, corroding any components in it path.  I've seen motherboards ruined from this.  If you're going to give it away or sell it, you might want to pull the motherboard (remove the two machine screws on the rear I/O panel, next to the pull tabs).  Slide out the board and unplug the battery's small connector (has red & black wires), then lift up on the battery, while holding down the "toothed" velcro mount with something non-conductive, like a popsicle stick.  Once it's free, dispose of the battery.  If you're interested, a replacement can be purchased for about $5-$7 from battery specialty retailers - it's a Rayovac 870 or 871.  Even if you don't replace it, removing one that will eventually leak is a good idea, (hopefully) before any damage is done. 

  • How can I browse the Adobe Market from my browser in stead of the tiny app display functionality?

    How can I browse the Adobe Market from my browser in stead of the tiny app display functionality?

    Hi,
    Can you please go through the following past forum posting: http://forums.adobe.com/message/4620312
    Hope that the info helps.
    With regards,
    Prabhu

  • How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade?

    Dear wise & wondeful people:
    How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade? Half of my contacts, notes, ect. were on my iCloud so have happily moved to my new iPhone but the rest are completely resistant. For example, on my iCloud I have 14 missing contacts starting with the letter A alone, however they are happily viewable on my old iPhone 4S and won't budge over into the iCloud.
    There are also 3 notes missing yet still acessible on my onld iPhone 4S, the list goes on.
    Your help would be most appreciated. Thank you so much.
    BCHR

    Hi BCHR,
    If you are having issues transfering your content from your old iPhone onto iCloud so it can be transfered to your new iPhone, you may find the following articles helpful:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
    http://support.apple.com/kb/HT2109
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/TS3998
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/TS3999
    iCloud: Notes overview
    http://support.apple.com/kb/PH12081
    Regards,
    - Brenden

  • How can I stop auto download of attachments without tapping on them? Once I open a mail, the attachment automatically starts downloading, though it is written as "tap to download". Please help..

    How can I stop auto download of attachments without tapping on them? Once I open a mail, the attachment automatically starts downloading, though it is written as "tap to download". Please help..

    To the best of my knowledge, there is no way to prevent the automatic downloading of the SD version when you buy an HD show.
    You can, if you wish, suggest that the ability to prevent the SD version from downloading through the iTunes feedback page. But since the SD version is needed for use on iPods and there at least at present is no mechanism for someone to download the SD version at a later time should they decide they need it, Apple may just continue to force the downloading of both versions. If they get enough feedback on the issue, though, they may figure something out.
    Regards.

  • How can I have multiple WINDOWS (NOT tabs) with INDEPENDENT content?

    How can I have multiple '''windows''' (''not ''tabs) with '''independent''' content?
    I used to be able to open separate windows with Firefox, and the content could be completely different in each window. No matter what I did in any window, no OTHER window open at the time, nor any of the content therein, was affected. This is no longer the case and it is extremely frustrating for me.
    I do ''not ''like tabs and do not use them. I prefer multiple windows plus I am so used to using them, for so many years now! But with v9.0.1 I suddenly can no longer do what I've always done with my browser without this aggravating problem constantly reminding me that I can't have what I want in firefox anymore.
    Or can I? Does anyone have a solution I don't realize exists?
    Thanks,
    Sowelu

    AppleScriptObjC can use pretty much everything in the Cocoa API, so yes, it is possible.
    Note that a view is not the same as a window, and a window can have multiple views. There are also many ways to implement "tabs";  take a look at some of Apple's applications - they use various mixtures of toolbars, checkboxes, and radio buttons, for example.  An application such as this will be a lot more involved than what you have done so far though, using custom classes and subclassing existing ones, so be prepared to do a lot of reading and researching.

  • How can i browse FP 2000 via serial port same use Ethernet port(RJ 45)?

    I am a new user for  labview.I develope my program with FP 2000 but I have some problem
      1 How can i browse FP 2000 via serial port same use Ethernet port(RJ 45)? if it can Tell me please.
      2 If  I use GSM/GPRS modem via FP 2000 rs 232 port (I under stand how to send AT command) and leave it stand alone
         Can I dial modem and browse file in FP 2000 same as use Ethernetport?
    Someone please help me.Thank you very much.

    Hi!
        First, I can say that your project involves many things, I cannot describe all features in the forum, and I'm not used with GPRS modems (my modems are base band serial modems...).
        Anyway, I would say that in your project you should proceed like this:
          1) Configure your FP 2000 module via MAX and ethernet connection;
          2) Download an embedded application to your module (build in LabView Real-Time)
          3) In your application, you should build a kind of serial port manager, and by the means of serial port you send/receive commands from PC.
        The commands from PC can include "Tell me the about the FP 2000 file system ", or "switch on line X", or anything you need.
       I think it would be difficult to use Internet exp, because you use IE with TCP/IP, and TCP/IP is over ethernet.
       I know that for Windows you can find some wrappers that make you "see" the serial port as an ethernet, but these wrapper do not exist under filed Point, and you shoul build one yourself!!!(and that's not easy).
        For example, to browse your files, you should build a VI that searches through your file system, and reports, via serial, the files present in a directory (it's an example....).
        About communication between GPRS modems and FP2000, I know nothing.  I suppose that these modems accept serial inputs, so you'll have to configure your serial port on FP 2000 with the correct baud rate, parity, and so on..... and you send your data to the modem.  The modem will transfer data in its way, no matter on how it does.
        To send data to your modem you shoud take a look to some Serial communication examples.  What I suggest you, first, is to connect the serial port of FP2000 to a PC, and test communication between PC and FP2000, without modems. Just direct cable connection!  If you're able to do this, insertion of modems is the next step, and should be quite easy.  If you're not able to make the PC receive strings of data from FP2000, over  RS232, adding modems is a further complication, and you won't come out of this mess!
       So, what I say, is just build, for now, a simple embedded application for FP2000, that, using RS232, sends data to a PC (you should see data sent with use of Hyper terminal).
        To build this application, use Instrument I/O --> VISA commands (VISA open, VISA write, and Property node should be enough, for now).
       Please, let me know if this helps......
        Have a nice (programming) day!
    graziano

  • How can I get WebAS to not start-up after restarting Windows?

    I would like to not have my WebAS auto start after I reboot windows.
    I found of couple of options in Configuration tool but they did not stop it.
    We have a firewall product that I cannot disable (per security policy), but I can terminate it once I get the desktop.  However by that time WebAS has started and encounters blocks from firewall, and once this happens, half the time it causes my jcontrol.exe to result in NIETIMEOUT messages and once THAT happens I have to uninstall and reinstall EVERYTHING. 
    So, how can I configure WebAS to not automatically start-up after rebooting windows?  I have searched help.sap.com and looked for options in Visual Admin and Configure tools.

    Easier than it seems
    Go to Administrative Tools/ Services in Windows.
    Change Startup type of the services to Manual.
    You can just sort by the 'Log On As' Column
    ".\SAPServiceJ2E"
    or whatever you instance name is. You can always start the service from the MMC console after this.

  • Condition to test for the browser closing/refreshing

    I have an applet that rotates pictures in a html file. I have it in an eternal loop to keep it running. It loads fine, but if you refresh or try to close the browser, the browser locks. Without question this happens because the loop does not test for the browser closing or refreshing so the loop never stops. Does anyone have an idea of a Java condition to test for the browser closing/refreshing so I can stop my loop when these events occur.

    The applets stop message should be called on a reload and/or a close. You could set a flag in your stop method that could be checked by a thread that actually sits and loops.
    When the flag is set, kill the tread.
    You should clear that flag in your start method.
    I have an applet that rotates pictures in a html file.
    I have it in an eternal loop to keep it running. It
    loads fine, but if you refresh or try to close the
    browser, the browser locks. Without question this
    happens because the loop does not test for the
    browser closing or refreshing so the loop never
    stops. Does anyone have an idea of a Java condition
    to test for the browser closing/refreshing so I can
    stop my loop when these events occur.

Maybe you are looking for

  • How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?

    How can I setup a mail-specific passcode/restriction on iPad used by multiple family members? Have an Exchange mail account setup and accessible in my mail on iPad... however my kids use it and i would like to restrict them from accessing this specif

  • Formula that creates additional rows

    Greetings everyone. I am fairly new to Apple numbers. I have a spreadsheet that calculates an investment return for clients year by year based on their age. I need the spreadsheet to go out to the clients age 100. There is an input page that I put in

  • Successor of the Nokia Asha 311

    I have an Asha 311 and though it's a nice phone (besides the problems like missing mutlitasking, copy/paste etc) I think the biggest problem is the tiny screen. Even for a feature phone, a Fulltouch-phone should have a display, which is at least 3.5

  • Why my iBook G4 can not find my iPhone 4s?

    I connect my iPhone 4s to my iBook G4 and wish that I can put all my iTunes list into iPhone 4s but doesn't work. But I can not find iPhone when I open iTunes. Why? Why? Tell me why? Or how?

  • PO price condition tied to a contract

    Hi, I have a scenario wherein I have to put in a PO price condition like freight against a different vendor which is not an issue.  However, the freight charges are actually covered by a contract and I would like to have the capability to link the PO