How can to see constraint error when inserting a dblink ?

Hi
When I Trying to insert in table in other server, using dblink , return error dupl key, but I do not know what is key
return me
[pre]
DUPL_CROTB_INVOICE_ORDER -ORA-00001: unique constraint (CROSS.SYS_C008565) violated
ORA-02063: preceding line from PROD1
[/pre]
How can I to know hat Is key ?
using 9.2.08

> How can I to know hat Is key ?
The error message doesn't give you the value. You'll have to find it via select...where exists (or something like that).
Or prevent the error in the first place by using MERGE (or insert...where not exists).
(Or you can try dml error logging when you upgrade to a supported version of the database.)

Similar Messages

How can i see the error message?

hi, i have written a procedure in the database 10g, with my own error, and it works. but, when my exception occurs, i want to see my ora-20000-message in the footer of the isql-screen in the same way like normal ora-errors do it. because, now the code handles the exeption, but i can not se any message.
thx.
(zahl1 in number, zahl2 in number)
as
maxvertrag number;
ergebnis number;
myerror exception;
pragma exception_init(myerror, -20000);
begin
select max(vertragsnr) into maxvertrag from robertl.tblugovor;
ergebnis := zahl1+zahl2+maxvertrag;
if ergebnis>104
then
RAISE_APPLICATION_ERROR (-20000, 'Result is > 104!');
end if;
exception when myerror then
ergebnis:=0;
end;

This is answered in how can i se the error message?.
As a side note, you generally don't need to cross-post in these two fora, as many of us frequent both.
Cheers, APC

How can I see my ratings when I view

I'm almost certain that as I used the viewer and the Adjustments Inspector that there was a time that my star ratings would show up below my picture.
Currently, while using the viewer (with the Adjustments Inspector open) I can hit a number 1-5 and it WILL rate it, but i CAN'T see it -- I have to switch and look at the metadata.
I've played with the Window menu, etc. No luck. Any thoughts?
Thanks!

The Y and U keys toggle the display of data overlays for the viewer and browser.
More here:
[Aperture Metadata Display|http://photo.rwboyer.com/2008/08/aperture-and-metadata-display>
RB

My girlfriend just bought a new iphone and needs me to help from home with her apps. How can i see them? When I log in i see my apps and my music

My girlfriend needs me to log in to itunes to help her w her apps. but when i do all i see are mine. i am logged into her acct???

Welcome to the Apple Community.
You can't keep swapping iTunes accounts to use other people's apps or you will locked out of changing back to your own account. I'm not sure how you can help her with her apps from another device.

How can i see the lyrics when i'm listening music on iTunes?

i've alredy taked the lyrics in the info menu but i don't know how to see it when i'm listening music

LucaReccia wrote:
i've already added the lyrics at all the song but i can see it just on my iphone, i want know any plugins for itunes that make me see the lyrics of the current song
There are no plug-ins to do this.

How can you see the progress when using a ForEach loop?

Hi,
I have an array with about 100 containers in it. My main thread uses a ForEach loop with an inner case structure with six possibilities. My previous program had all the steps in a very long list, executing them one by one. I find this new approach is much nicer to look at, and easier to change, but there isn't really any way of telling how far along the test is (unless you know it by heart). In the long list approach, you could see all the Done/Passed outcomes and how many remained, now there is no way of telling.
Any tips on making some kind of progress indication?
Solved!
Go to Solution.

As ObjectReference parameter, you should use 'Nothing'. The last parameter (synchronuous?) you can choose true or false. Please refer to the documentation of PostUIMessageEx for further information.
The numeric parameter should range between 0-100. Since it is "Progress Percent", this makes sense, does it?
The status bar has several panes, one e.g. displaying the logged in user or the used process model. The pane on the right most side will display the Progress Percent if used in your sequence.
The default reporting, as already stated, includes this feature. So if you have a sequence with e.g. 500 steps, the reporting "will have a visible progress" in that pane (with less than 100 steps, it is most often too fast to see). Remember that NI Sequence Editor and the Full Featured User Interfaces do have this feature, the Simple UI does not have it.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How can we see print preview when executing T Code?

We create a one T Code . This T.code is assigned to one programme. Programme is assigned to one smart form. When I execute
New T code . The system is asking input parameters than executing Tcode system is terminating the screen.

Hi Go for RSMONICDP give timestamp and u'll have it.
Please assign points if useful
Edited by: Aadil on Jan 21, 2008 7:43 AM

How can I see the numbers of lines selected in a Multiple Selection Box?

Hi everybody,
what I want to do is to get in an array of numbers all the lines selected.
For instance, if I select the rows 1,4 and 7 from a Multiple Selection Box
of 10 rows in total, how can I see that array when the rows 1,4 and 7 are
selected?
Because I want to connect this numbers to Case Structure and if the only
rows selected are 1,4 and 7, the Case Structure will only realize this cases,
and the rest will be ignored.
I'm sure there is some way to get what I want.
Thank you for your helpful.

THANK YOU VERY MUCH. IT WORKS PERFECTLY!!!
"Dennis Knutson" wrote:
>>If you just wire the list box to an array indicator, you will see that
the>output is an array of the selected items. Auto index the array through
a>for loop that has your case statement inside.>>Dennis Knutson>>"Carlos
Jorge" wrote>>Hi everybody,>>what I want to do is to
get in an array of numbers all the>lines selected.>For instance, if I select
the rows 1,4 and 7 from a Multiple>Selection Box>of 10 rows in total, how
can I see that array when the rows>1,4 and 7 are>selected?>>Because I want
to connect this numbers to Case Structure>and if the only>rows selected are
1,4 and 7, the Case Structure will only>realize this cases,>and
the rest
will be ignored.>>I'm sure there is some>way to get what I want.>>Thank you
for your helpful.>>

How can I reset ipod classic when error message 439 shows?

how can I reset Ipod classic when error message 439 shows?

The easiest solution and apparently the only approved solution via Apple (although a pain if you haven't backed up your device) to restore the phone if you can't figure out the passcode. It will erase everything but if you have a fairly recent backup then you will be fine...you may only lose anything that was added after the last backup. You can also try searching the Apple Support pages and forum to see if there is another solution. Ultimately, it's a plus to a certain degree that there is no easy way to change the passcode....if someone "found" it and wanted to try to get in to it....but it's a pain when it's a situation like yours.
.https://discussions.apple.com/thread/3750135?start=0&tstart=0
http://support.apple.com/kb/HT4113#
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf pg 165

When I update my nano ipod I get an error message "User ipod cannot be updated. The disk couldnot be read from or written to." How can I overcome this error message.

In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated. The disk could not be read from or written to." How can I overcome this error message.

Hello there dilip77707,
It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Thank you for using Apple Support Communities.
All the very best,
Sterling

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

How can I see what I'm actually video recording on iPad Air so that I don't include extra stuff at the borders of the image? It seems to automatically "zoom in" on the screen, but when I export the video, the picture isn't framed well.

When I try to record a video on the Ipad Air, the screen automatically "zooms in" closer than when I'm taking a photo. So I frame the interview and record it. But when I export it to post it or edit it, I discover that only the screen was zoomed in, the camera wasn't, so I have all this extra stuff around the edges of my frame.
I don't need to zoom in, but I do need to be able to see what I'm shooting--otherwise, as I'm videotaping, I'm guessing at my picture's framing. But every time I switch from photo to video mode, the screen "zooms in." How can I see what I'm actually recording?
I've been searching for an answer for this for a while, but I can't find any responses to it! Thanks.

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

How can i see when someone has accessed my call/text log. (This is possible on google) I have been informed that someone has accessed my activity log and is giving my information to a third party. I believe it is a service tech, but I am not interested in

How can i see when someone has accessed my call/text log. (This is possible on google/gmail) I have been informed that someone has accessed my activity log and is giving my information to a third party. I believe it is a service tech, but I am not interested in persuing that further. I just need to see when my account has been accessed if possible.

Hi lynniewigs,
This is a common concern among Android and I-phone user, and one of the drawbacks to using a smart phone. We lose so much privacy. Our phones become cameras into our homes for us to be spied on.
I don't know what type of phone you have, if it is even a smart phone, but here is an example of an application that you can use to determine which applications are accessing your information and sending it out.
Permission Scanner - Android Apps on Google Play
Google just recently revamp their permissions geared to hide invasive applications that spy and send out your information without your knowledge. Report says be aware of what your Android app does - CNET
Please continue to be mindful of the apps you download and the permissions you give.

I try to find something on my iPad, many results are emails, when I push on an email I can't see the email, because I get ever the first email,or the previous selected email in my inbox. How can I see the email selected?

I try to find something on my iPad, many results are emails, when I push on an email I can't see the email, because I get ever the first email,or the previous selected email in my inbox. How can I see the email selected?

Is your Yahoo account set up as POP3 or IMAP?

When going through photos how can i see if they are in an album

when going through photos how can i see if they are in an album

~Not quite the same but you can find all the images that are not in an album (or vice versa) with a Smart Album.
File -> New Smart Album
Album -> is not -> Any

How can to see constraint error when inserting a dblink ?

Similar Messages

Maybe you are looking for